Ralink rt3290 bluetooth 01 for Win 8

Hello ! 
i have HP Pavilion 15-e068se Notebook PC Drivers and can't install this app ralink rt3290 bluetooth 01 for Win 8, and others on photo, 
Can you help me please to solve this issue ?

Hello AlexaLaw.
Welcome to the HP Forums. I understand the computer is not recognizing your Ralink Bluetooth software, and other unknown devices. I apologize for the delay, but I will assist you the best I can.
I will start by providing your computer's Ralink Bluetooth software for Windows 8: Ralink Bluetooth Software Driver for HP Pavilion 15-e068se Notebook PC
This is the correct driver for this computer. To install it properly, please follow these instructions:
1. Go into Device Manager. Right-click on the Ralink Bluetooth software under "Other Devices" and select "Uninstall". Please do not restart the computer.
2. Download and install the Ralink software I provided above. A restart might be required.
Once this is done, please ensure Device Manager is showing the correct Ralink software.
To address the remaining unknown devices, I will provide a Microsoft document. Following the Microsoft document will allow you to identify these devices and resolve their issues: How to troubleshoot unknown devices that are listed in Device Manager
Please note: This document is intended for Windows XP. However, the steps to resolve the issue bear the same value on many versions of Windows, including Windows 8.
I believe your issues will be resolved by trying the suggestions above. Either way, please post your results. Thank you for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

  • I need driver bluetooth for win 7 64bit who can help me ?

    I need driver bluetooth for win 7 64bit who can help me ?

    Does this solve your problem?
    http://windowsforum.com/threads/make-your-bluetooth-devices-work-on-windows-7.24 580/

  • Ralink RT3290LE + Bluetooth 4.0 Wifi Adapter Replacement options for Pavilion G6 2301ax!

    What Wifi Cards are Supported for
    "Ralink RT3290LE + Bluetooth 4.0 Wifi Adapter"
    Included in  Pavilion G6 2301ax.
    From india.

    Hi @PulsarLight ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of replacing the Bluetooth adapter for your HP Pavilion g6-2301ax Notebook. Here is a link to your Manual that shows the adapters on page 32.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

    Hello!
    I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
    I do the following:
    1. Install Windows 7 x64, SP1.
    2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
    3. Install all Windows Updates from Microsoft
    4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
    Here is the log file for the first try (win7update.log):
    Update started 12\28\2011 at 21:11
    Installed TVALZ_O.INF
    Installed IO & Memory Access Driver
    driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
    util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
    Update completed at 21:29
    After reboot I run it again and the result is:
    Update started 12\28\2011 at 21:38
    Toshiba Bluetooth stack has already been installed.
    Toshiba Value Added Package has already been installed.
    Update completed at 21:40
    Any help is appreciated!
    Thanks in advance!

    You are right this notebook model was delivered without OS.
    Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
    What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
    Win7 SP1
    Intel Chipset SW Installation Utility 9.2.0.1015
    TOSHIBA Supervisor Password Utility 4.8.6.0
    TOSHIBA HW Setup Utility 4.8.6.0
    TOSHIBA Bulletin Board V2.1.10
    TOSHIBA ReelTime 1.7.17.0
    Intel Management Engine Interface 7.0.2.1164
    NVIDIA Display Driver 8.17.12.6669
    Intel Rapid Storage Technology Driver 10.1.2.1004
    TOSHIBA Value Added Package 1.5.4.64
    USB3.0 Driver 2.0.32.0
    NVIDIA HD Audio Driver 1.1.13.1
    Conexant Audio Driver 8.51.1.0a
    Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
    or
    Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
    or
    Realtek Wireless LAN Driver 2.00.0013
    TOSHIBA Wireless LAN Indicator 1.0.3
    Synaptics Touch Pad Driver 15.2.11.1
    TOSHIBA Software Modem 2.2.97(SM2297ALS05)
    Conexant Modem Driver 7.80.4.53
    TOSHIBA HDD Protection 2.2.1.12
    Atheros Bluetooth Filter Driver Package v1.0.7
    Bluetooth Stack for Windows by Toshiba v8.00.04(T)
    Atheros LAN Driver 1.0.0.46
    Realtek Card Reader 1.0.0.12
    TOSHIBA Sleep Utility 1.4.2.7
    TOSHIBA Face Recognition V3.1.8
    TOSHIBA eco Utility 1.2.25.64
    Intel Proset 14.0.2.0.1.s64_wCAT
    Intel Wireless Display 2.0.29T
    TOSHIBA HDD_SSD Alert 3.1.64.7
    TOSHIBA Service Station V2.1.52
    TOSHIBA PC Health Monitor 1.7.4.64
    ConfigFree 8.0.37
    TOSHIBA Web Camera Application V2.0.0.19
    TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller Plug-in 1.0.6.1
    PatchFiles$$2 PCIIDEREG-1.2
    PatchFiles$$3 TosVolRegulator_x64_1.1
    It is very important to use right installation order.
    Please post some feedback.

  • S205 :Sad with Lenovo Driver support for Win 8

    Sorry for my bad english, but I need to tell you my frustrating experience.
    Due to low cost new windows 8 OS 64bit, I buy a lincense for mine Lenovo S205, conforted with some new Driver updated for 8 on Lenovo site.
    I saw something strange in the Driver's page for ex. the wireless driver is called Cybertan\LiteOn and we have a Ralink RT 3090 wifi module.(or in some market Atheros AR9285)... Hummm realy strange.
    I cross my fingers, I pray god and I start downloadin ALL the driver and start upgrading my system.
    At restart I have my new Win8 64bit system and thank of god the most important driver (Ralink wifi) was autodetected and recognized by Win8  whitout install the strange Cybertan\LiteOn from Lenovo that doubt was working in a ralink device.
    But at this point strarts the big issues with the unrecognized devices, that tahnks of god were less than expected but drivers fron Lenovo site were all wrong !!!!! Yes wrong, it seems a joke but was the true, 
    I think,(to tell the true I'm sure) no one from Lenovo tech checked the drivers in a S205 models, and I can explain why with the above sad experience:
    - SOUND: windows only install generic HD drivers and the sound quality as expected was crappy. So I try the lenovo driver Conexant but it does not properly work, SmatAudio icon in the ControlPannel was not present, no conexant pannel to manage sound, and nothing changed, windows continue with is own generym Microsoft HD drivers. I remeber that Lenovo model U300S and U300E have the same soundcard I dowload their Conexant Win8 driver (with a different number so I hope it was teh latest) and my idea was great, the Conexant U300 driver works on my S205 lenovo and Win8 detect the conexant soundcard and SmartAudio is present and working. There is only a isse concerning SRS Sound that is present on my system but if I try to lounch nothing appens, so I think is not correctly working. But so far so god sound is better than before with generic MS drivers, but to do so I have to choose a different driver from a different Lenovo pc, not an easy step for a normal user.
    - OSD: on screen display (FN+F keys) in 7 they was insert in the Lenovo Energy Mnagement, so to works you need to instal it. I make the same in win 8 with the new Lenovo Energy Management provides by Lenovo site, Lenovo Energy Management is working but OSD no !!!!
    Windows 8 detect and show you in autonomy soud level and brightnes when you press FN+Arrow keys ant that are the most important but ALL the FN+F Keys are not showed on screen even if probably they are working (for ex. Fn+F6 correctly enabel1disable touchpad) but not icon showen on screen !! Well I can leave without OSD but once again seems Lenovo don't try EnergyManagement on a Win8 pc.
    - CARD READER: Windows detect and unknow device called USB CRW and I though correctly was the card reader, in fact I try a sd and win8 was not able to read it. So I install the Realtek CardReader downloaded from Lenovo site, It was extracted and installed but I don't know why the driver seems bugged, the pattern contains only some icon but not exe ord driver, in fact the Card reader even if I try the driver more times it was not decetced. I tryed the old Windows 7 driver for my S205 and thank of god it was working and now my cardreader is detected and working. Once angain the win8 driver provided by Lenovo fails and I need the oldest win 7 driver that maks the job.
    - TOUCHPAD: Synaptics touchpad was detected by windows 8 but all the basic features as the scrolling or 2 fingers was not working. So I try the Synaptics drivers provided by Lenovo and it was only for 32bit system even if is clearly showed as 32 and 64bit driver. The driver itself promp me that is not working on a 64bit system and i need to contact the producer :-(
    Hahahaha very hilarious so I have to download the driver from Synaptics server that is so slow that I need 2 hours to finaly have my touchpad driver. Once again an epic fail from lenovo site.
    CONCLUSION: Lenovo is the new n.1 pc producer in the world but it seems realy not professional when check his drivers and public it on the website. Could be s205 is the cheapest and not business line notebook but ... I am realy sad whit the way Lenovo put new drivers without any preventive control in the homesite driver's page.
    It seems it was a lottery, extracting a number and put the corresponding driver on the S205 drivers page :-(
    Sir this is not the good behaviour, is the bast way to loose users !!!! Very disappointed, very sad and I hope this post can help S205 users taht want use the new Windows 8 system to catch the correct solutions
    I hope too some Lenovo developers can read this, try win8 on a s205 notebook and solve all the problems, because even if I solve with my 20 years pc experience all the issue, still remais some problems as SRS Sound seems not working (if It can work on our system, but if it can't why put in on our s205 driver too) and no OSD for every FN keys working.
    There are not present some utility for win 8 as for example the CAPSLOCK keys utility that was present for 7 but not for 8 (I have to try if the older work on 8) or the Lenovo OneKey that seems not ready for 8..
    So far so good winodws 8 works great on S205 and is a good choice if you catch the correct drivers as I explain here.
    Hoping this help Lenovo not making the same mistakes in the future, and learn from their errors.
    Once angain sorry for my language mistake but I'm not English
    Hore this post can help in some case
    Bye

    Hi Romagnolo1973!
    Thank you for posting all the things you learned, and how you got your S205 working with Windows 8! Hopefully this will help others. 
    To be fair to Lenovo, they list Windows 8 as not supported on the S205.
    http://download.lenovo.com/express/WIN8-INDEX.html
    As you found, it is sometimes possible to work around the problems and get things working to your satisfaction!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Slow wifi with Ralink rt3290 network adapter

    I formated my laptop and installed win 7 x64 once again.My wifi was fine before but now I have installed all the drivers from HP support and my wifi speed is very slow although other laptops in my house have normal speed (about 10 times faster).I have a Ralink rt3290 adapter with driver version 5.0.45.0, I have tried to uninstall and install all the possible driver versions with no success.I tried all the forums I could find and did DNS flushing and such, the router is configured fine and is not too far or too close to my laptop.If I connect with ethernet cable my speed gets to about 80mps, when on wifi I get 5mps and on the other laptop I get 40mps.I really don't know what to do and I don't think that the adapter itself is broken.Can someone please help me?? Thank you,John

    Yes there are older ones, but it sure seems odd that the older you go back the better they work... I am going to give you a link with revision histories of the drivers. Try any of them you want...I would start with 5.0.5.0 http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229456&swItemId=ob_113862_1&swEnvOid=4059#tab-history I would also check to make sure the wireless card antennas are securely fastened to the wireless card. There are rare circumstances where one of the antennas are not securely fastened to the card during assembly and that causes all kinds of issues, needless to say.

  • Ralink RT3290 802.11bgn Wi-Fi Adapter is not detecting wifi

    i am using HP PAVILION 15-E015TX. i reset my windows 8 OS recently because of some corruption of data. after resetting the OS everything is reinstalled to its original state. But the Ralink RT3290 802.11bgn Wi-Fi Adapter is not detecting the wifi which is worked properly before resetting the OS. when i run the troubleshoot option under HP SUPPORT ASSISTANT it shows a red mark while resetting the adapter. 
    i want to know how can i fix it. 
    This question was solved.
    View Solution.

    Rats.
    I hope the replacement card fixes the problem.  Over the years I have had just one bad network card -- and it drove me nuts tracking down that it was, indeed, a failed card. 
    Good Luck - post back if you like and let us know the results!
    Click the Kudos Star!
    It is a nice way to say “Thank You” for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Satellite L755D-14C doesn't detect Bluetooth after Win 7 installation

    I have Toshiba Satellite L755D-14C laptop, and I used to use my internal Bluetooth in my old 64-bit Windows 7 operating system, then I reinstalled Windows 7 and suddenly the Bluetooth is gone
    I tried to installed the driver but nothing happened, like the device wasn't there at all,
    Now I have Windows 8 64bit on my laptop.
    Can you help me with my problem?

    Beside the mentioned tools you forgot to install the [Toshiba Bluetooth Stack v9.10.00 for Win 8|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=178&selProduct=6465&selSh ortMod=null&language=13&selOS=42&selType=all&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=all&page=1&ID=84288&OSI D=42&driverLanguage=42]

  • Satellite A350 - Toshiba service station for Win 7 is not working

    I am using a Toshiba A 350 and downloaded Toshiba Servc\ice Station utility for win 7.
    It fails to open (even if admin rights).
    The TsmachInfo service is started in srvices.
    Any workarounds or do i have to install somthing more to this working?

    Hi
    As far as I know you have to unzip this firstly and then you have to execute the exe file
    Check this
    Otherwise its a OS issue because the exe file should run properly and you should be able to install this tool.
    Greets

  • TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

    I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
    I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

    Hi, I disabled the antivirus and the firewall. Same result
    I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
    Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
    My iphone 5 is not jailbroken, and is a factory unlocked phone.
    Any other suggestion?
    Pls help

  • HP LaserJet P1505 Drivers for Win 8

    I have a new computer with Win 8 and my HP LaserJet P1505 printer does not work because of missing drivers. Does anyone know where i can get drivers for this printer for Win 8 or do I have to buy a printer that is not HP?
    Thanks Paul

    Hi Paul,
    I afraid the P1505 currently not yet supported on Windows 8.
    According the official statement a driver should be available till the end of 2012, I would believe it will be a bit dilayed and will become available in several weeks.
    Please check the following link in the near feature, as soon as the driver will become available you will be able to download it from that page.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where Can I Download ToolboxFX For Win XP

    I have an HP Laserjet Pro CP1525nw printer (connected via USB) on a Mac Pro running OSX 10.7.5 and have been trying to find a way to increase the toner density setting for certain uses (printed circuit board direct transfer sheet printing). I bought this printer around November 2012.
    I found out that your utility program ToolboxFX will accomplish this task, but you do not offer a Mac version.
    I do have Win XP installed to run under VMWare Fusion so I tried to find an XP version of ToolboxFX that I could install there. I ran into problems with internet connectivity, which was necessary to download the MS .net something or another package required by the installer. So I gave up on that effort.
    Next I tried to install XP under BootCamp, but ran into so many problems that I abandoned that effort and went back to trying to get the connectivity problems with XP fixed under Fusion. I finally got that to work and last night installed CP1520series_nw_full_solution.exe including that MS .net something or another. After the second attempt it saw and connected to the printer.
    Unfortunately CP1520series_nw_full_solution.exe does not install ToolboxFX. A link on your web page to download ToolboxFX instead leads to a download for OJProK850_Toolbox_en.exe, which is something for some inkjet printer that doesn't even recognize the printer driver. The installation disk that came with the printer contains the same CP1520series_nw_full_solution.exe installer and does not include contain ToolboxFX that I can see.
    I tried to contact live chat with this question but after typing all this in, I found out that they do not support out of warranty products.
    Can somebody please give me a link to download an installer for ToolboxFX for Win XP. The HP website keeps sending me in circles that lead nowhere. Thanks.

    Is this the package that you installed?  According to what I have been told it should include Win XP ToolboxFX.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Safari for win 8.1 pro

    where can i download to safari for win 8.1 pro (64bit)
    I am already safari at home on my macbook but i wanto use safari on my pc at work.
    many thank for your help

    Use may use the last version of Safari available for PCs, it will work just fine.
    Here's the link.

  • Satellite P70-A-104 - cannot find webcam driver for Win 8.1

    Hello,
    I have installed a 2nd hard disk with Win 8 Pro 8.1.
    I also have downloaded all available drivers for my model P70-A-104, but there is no driver available for the built-in Toshiba WebCam FHD. I have also checked other Toshiba models with 2 MBit FHD Camera.
    Is there anyone who knows where to download the correct driver? I know there a some tools for driver updates (25 - 30 US$) but they don't display the missing web cam driver.
    Yours

    As far as I know there is no webcam driver for Win and no webcam driver for Win 8.1 because the notebooks webcam module is controlled by internal Microsoft driver provided with Win 8 / Win 8.1
    Question: do you have any yellow exclamation marks in device manager? I guess the webcam is listed there...

  • Creating Recovery Discs for Win 7 - When Win7 Pro 64 is Preloaded from Win 8.1 Dowgrade Rights ?

    Novice questions:
    1. What is the proper procedure for:
    Creating Recovery Discs for Win 7 Pro 64 - When Win 7 Pro 64 is "Preloaded by Lenovo from Win 8.1 Dowgrade Rights" ???
    2.  Will I then be able to use these Win 7 pro 64 - Recovery discs in the future should I need to "clean install Win7 Por 64 on the computer again ?
    3.  Also, If I use an Imaging Pgn like - Paragon Backup and recovery will I be able to reload win7 image and have win7 activated automatically just be restoring the Paragon backup image ? 
    JosephB
    T61 6459-CTO - 15.4 WXGA - XP SP3
    Solved!
    Go to Solution.

    JosephB wrote:
    ... BTW, when you perform the - Weekly "Macrium - Image Backups", do you backup to a local USB cable connected External Usb Drive or wireless wifi connected to a NAS Drive ?
    I have a Verbatim 2TB external USB 3.0 drive plugged into the PC.  It's used for both my weekly image backups as well as my nightly data backups.  I have one of these on EACH machine in my environment, for backups local to that machine.  I also use them on machines I build for friends and family, as everybody needs a backup system for "priceless data".
    Actually, to be a bit more complete, my "data" backups consists of two parts: (1) 1st-of-the-month FULL backups of all my data, and (2) nightly INCREMENTAL backups which handles anything created/changed in the past 24 hours.  Thus a "backup set" consists of the beginning FULL backup coupled with the ever-growing throughout-the-month set of nightly INCREMENTAL backups.
    NovaBACKUP can handle all of this if you need to recover something, so you yourself don't need to know exactly which backup file your file is located on.  You simply identify the folder/file(s) you wish to recover, and the AS-OF date you want for that file (with "as of the latest version available" being the default).  If you want to recover an older version than the most current version, you simply slide a GUI time-slider backwards until you arrive at the as-of date you desire.  NovaBACKUP then figures out where the most current version is AS OF THE DESIRED DATE, and accesses that one-or-more backup files in order to complete your task.
    I retain multiple "backup sets" (going back 4 complete months), so I can recover any folder/file(s) I had available on any specific night during the past 4 months.  Most commonly of course it's typically "get me the most current version available as of last night", but just in case that version is corrupt or I truly want an earlier version, I can get it easily.

Maybe you are looking for

  • SAP R/3 MMC Problem

    Hello Seniors, When I am opening the R/3 MMC, I am getting the console. but in that I am unable to expand the console. I am unable to see my server and hence unable to start my server. I am using R/3 4.7. I have this installed in P4 system with 512RA

  • Links in emails don't work

    I receive several messages with links in them but when I click on them there is no follow-through.  To reach that link I must go to the site in address area.  Is there a way this can be corrected?

  • How to Enable Remote services using the GPO for the Client Machines

    How to enable remote Access services on Client machines using the Group Policy. After enable how to access with out switching the users  remote as administrator

  • Why battery is dying too fast after iso5.01 upgrade

    why battery is dying too fast after iso5.01 upgrade,  It is dying on an average of 13% every hour and a half, in sleep mode.  I've tried hard restart and restore in I tunes, no difference!  It got worse after I upgraded to 5.01.  This has to fixed If

  • Regarding New transaction in BPM's

    Hi Everyone, 1.Are there any Prerequisites for defining BPM's? 2. In the Block Step Type,we have option as New Transaction. Can anyone tell me the use of this. please site some examples. 3. In some step Types like Send, Transformation, Receiver Deter