Ram advice please!

Hi,
I’m new to this forum but I would appreciate if u guys could give me some advice.
I have a K8N SLI Platinum and at the moment I run 1x 512 of Kingston Hyperx 533 memory @ 400MHz.
I keep getting messages like system run out of memory or something… while playing BF2 and Anarchy Online.
I think it’s time to get some extra memory but I need some advice.
With £100 budget I can get:
512MB Kingston HyperX 533 (don’t know if it will match my current module tho)
or
1G (2x 512 matched pair) of Branded memory like Crucial Ballistix Tracer PC4000 for example,
or
2G (2x 1G) of generic PC3200 ram CL2.5. (can’t guarantee a matched pair)
And here is where I need help!
I would like to achieve a compromise between performance/stability but the later is my main concern.
What do you think will work better for me, mainly for gaming purposes ?
1- 2G (2x1G not matched) @ 200?
2- 1G (2x512 matched) @ 233?
3- 1G (2x512 not matched) @ 250?
4- Does it make a big difference if I run @ 250 instead of 200 FSB?
Thanks in advance.

Quote from: Boarder981 on 14-September-05, 22:05:23
For games like Battlefield 2 that are major memory hogs, I think the extra gig of RAM would be more beneficial ... though I haven't tested the two side-by-side so I'm not sure.
Of course, if it's generic low quality RAM, you might have a problem
Timming help a little but I opted to 2GB of cheap vs 1GB of fast ram. I run a lot of programs and this helps, games like BF2 run sweet with 2GB. I've tested with 1GB faster ram vs 2GB (2GB wins) When LAN partying I can take out 1GB if some are running 512 (happens, just getting it back makes happy but not them)
Cheapo generic "NO NAME" ram often is not fully tested or made well with lack of support in most cases (what out for RMA central). That why I've used Crucial for years, good products/support and I've never had to send any sticks back.

Similar Messages

Hard Drive and RAM Advice please...

I'm looking to expand my computer by adding more RAM and more hard drive space but unfortunately I haven't the slightest clue on what I should buy. I've never bought any kind of internal hardware before. I have an external but I'd like another internal drive since I have the slot space.
I'm a video and film enthusiast who shoots weddings, music videos and short films. I currently use Final Cut Studio, After Effects CS3, PS, and Shake. So as you can see, I have a fully loaded desktop in need of some serious power. It runs pretty good now, although when I get towards the end of a project it tends to crunch up and slow down due to all of the rendering and large file sizes being tossed around. So what should I get? Here are my hardware specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 2
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 2.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.4f0

Hi-
For your internal hard drive, a good, fast second drive for scratch files would help.
In the 7200RPM 500GB range, the Western Digital WD6400AAKS is by far the leader in speed. Very quiet and cool as well.
For a bit larger capacity, the WD7500AAKS is an excellent drive. Also cool and quiet.
If you want to go to a full 1TB drive, the Hitachi 7K1000 series is very fast, with the Samsung Spinpoint F1 also being an excellent performer.
As for the memory, the sweet spot seems to be 4GB. Memory is still cheap, so adding memory is a good, economical idea. For quality, guaranteed, Mac compatible memory, see OWC.
You can watch installation videos on how to install your memory and hard drives. Easy stuff.

New System Build feedback/advice, please...

Time to build a new WorkStation. My motivation for upgrading is that I have been using a mediocore laptop (i7m, 8gb, 250gb ) from my work as my home system for the last 2 years, I am starting to get more freelance coming in and need a good desktop.
I am not so sure about my processor, mother board and video card choice. I am more interested in app usability than absolute throughput and want to maximise my dollar investment.
Purchase date: this week
Budget: I'd like to stay close to $1000-1300, but can spend more for significant performance gains. As I do more research, my inclinations are trending higher.
System Usage: My primary uses will include photo editing with Lightroom and Photoshop, 3D graphics using 3D studio Max, Maya and Mud Box, HD video editing using Premiere and After Affects and Web Design. I will also use it as an HD media player and hifi audio is important. Maximizing cs6 performance in premiere & pShop is my main target. I am focused mainly on user experience while running these apps. If I need to encode hrs of video or crank out frames in max/maya, I can do it at work. I seldom run games.
Monitors: I'm running two Dell U2410's IPS, calibrated w\Color Munki, one portrait one lanscape.
Parts to Upgrade: Full system build
O/S : Win7 Ultimate, I might play with Ubuntu/Virtualization
Vendor: Newegg unless I can save big $$ else where. I like B&H.
It needs to be an Intel machine & I have chosen lga 2011 becuase I'll eventually go to 64gb. I'll do some modest overclocking.
Any advice is appreciated. Thank you for your expertise.
Processor:
Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820
$299 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115229
or
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
$569 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
Do you have any feeling about how much I'll gain by going to the 6 core cpu over the 4 core? Remember, for me usability in the cs6 apps is more important than marginal gains in throughput.
Mobo:
MSI X79A-GD45 (8D) LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
$218 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130635
or
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
$240 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157289
or
MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS
$380
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130626
I would really appreciate any feedback on mobos in regards to maximizing cs6...7...8 performance, system logiveity, and performance. Is it worth it to go for a higer end mobo? If so which one. I like the msi's based on eventually ug to 128 gb, but are they money well spent? Any probs w/these mobo's?
Memory:
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL10Q-32GBXL
$130
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231490
Hard Drive:
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
$160
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164
Video:
GIGABYTE GV-N65TOC-1GI GeForce GTX 650 Ti 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card
$160 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16814125447
or
MSI N660 Ti PE 2GD5/OC GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Item#: N82E16814127696
$300
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127696
I am still a little unsure of the real world differnces that I'll realize by doubling my video card expense, advice please?
Optical Drive:
LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-Ray Burner with SW, 3D Play Back - BH14NS40
$70
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
Case:
COOLER MASTER HAF 912 RC-912-KKN1 Black SECC/ ABS Plastic ATX Mid Tower Computer Case
$60
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119233
Power Supply:
FX Core Edition PRO650W (P1-650S-NLB9) 650W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply
$90
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207014
Total $1190
or $1760
I have picked the MSI motherboard due to its support for 128gb ram, superior audio and other high end features. The AS Rock for its rep for solid value/performance. Opinions?
Finally, I would like some advice on video cards. I prefer nVidia to ATI, but I'm not sure which chip to go for. The six fifties are cheaper, but the 660 ti provides more CUDA cores.

Alex,
I sure wish you would quick picking fights with lots of knowledgeable people just trying to help people build good PCs for running Adobe Premiere. (I am stating that based on not just this thread, but rather the strong challenges you seem to bring to about half of the threads that you've chosen to participate in).
I was the original poster to suggest that Neal select a larger case. Next Harm agreed and cited 6 points which I would agree with regarding why a larger box is better for a video editing rig.
What are the typical goals for someone wanting a video editing PC? I would expect that most users want:
- robust, runs and never fails
- has incredible power; face it, video editing with AVCHD is one of the most taxing applications a PC can face today
- quiet; who wants to be doing creative work with any server room like wind noise
Now let me be specific where you are simply WRONG WRONG WRONG:
You stated: "Back pressure increases in larger spaces due to natural impedance of airflow (much like with electricity traveling over distance)"
Fact: Exactly the opposite; Back pressure decreases in larger spaces due to more room for the air to flow (much like thicker copper passes electricity with less resistance than a thin wire)
Your stated: "Open non-compartmentalized spaces are a recipe for hot spots - areas of turbulence with higher temperatures." and then cited a server room article talking about cooling air taking the path of least resistance -- going under the floor in a server room, instead of through rack mounted servers.
Fact: Lots of open space for large, slow moving fans to keep a video editing box cool is a great way to go
You stated: "Full towers - in themselves - are worse for cooling"
Fact: That is one crazy indefensible statement!
I seriously doubt that you fully comprehend the differences and importance of thermal conductivity, heat capacity, conduction, convection, and radiation for you to make the statements that you have so far and these are the staples for discussing how heat transfer takes place.
Note to other readers... There are lots of ways to cool components including cpus, hard drives, gpus and memory. I suspect that the noise levels brought by servers and some gamers would be totally offensive to the ambient noise level that you want in the room with you for video editing. Therefore we are left with just a few quiet alternatives: 1) lots of volume at low velocity (large cases, large fans, slow rpm), 2) liquid cooling, and 3) Cases with doors or baffles to keep the sound from a noisier solution from getting back to your ears.
Regards,
Jim

TS3391 I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

I need G4 MDD, Hard Drive Up-Grade advice, please.

I need G4 MDD, Hard Drive Up-Grade advice, please.
My G4 Model:
Power Mac G4 (Mirrored Drive Doors 2003) - M9145LL/A
Processor G4 1.25 GHz (SINGLE)
- L2 Cache 256 KB (1:1)
- L3 Cache 1 MB
167 MHz Bus Speed
(Dual Boot Model) - Running 10.3.9 and 9.2.2
Installed Memory - 1- 256 MB Stick and 1- 512 MB Stick - (Kingston PC2700 - KTA-G4333)
- Maximum 2 GB
- Slots 4 SDRAM (PC2700 - DDR333)
Hard Drive 80 GB Seagate
- Type (Speed) Ultra ATA/100 (7200 rpm)
Combo Drive
USB 1.1 2
FireWire 400 2
EtherNet (built-in) 1000Base-T
Expansion Slots 4 PCI slots
Display ATI Radeon 9000 Pro
- VRAM 64 MB DDR
- AGP 4x
LaCie external DVD Burner.
I'm planning on doing the following:
I'm on a limited budget, can only afford to spend around $300.00
I Want to add 3 more 512 MB Sticks of the Kingston KTA-G4333/512 PC2700 Ram.
Also, I Want to Replace my 80 GB HD with either of the following:
2 - Seagate 160 or 250 GB SATA drives/8 MB Cache on the Rear Bays
And a - SIIG SATA PCI Controller Card (SIISCSATM12S)
OR;
1 Seagate 160 GB ATA/100 8 MG Cache drive in the ATA/100 Bus Rear Bay.
And 1 Seagate 160 GB ATA/100 8 MG Cache drive in the front ATA/66 Bus Bay.
My Question:
(Which would be better performance wise and for stability?)
I only want to have 2 internal Hard Drives so my Mac won't over heat.
I'm planning on Cloning my 80 GB drive to one of the new drives using Super Duper.
After that, I'll store the drive until I can afford to get an external OWC case for it.
I want to use the second new drive for a Photoshop Scratch disk and for temp video file work.
Under 10.3.9 - I use:
Photoshop CS2
Toast 7
Popcorn 1.0.3
VisualHUB
On occasion I still boot into OS 9 for Photoshop 5.5., QuarkXPress 3.2.2 r5 and Adobe Illustrator 7.
I don't foresee being able to afford a Mac Pro and don't want to get a used G5 anytime
soon. I'm hoping my G4 will last me a few more years.
I suspect putting a ATA/100 drive on the ATA/66 Bus might hamper performance. And suspect using a SATA controller card in a "PCI" slot isn't as good as having a True SATA Bus, performance wise either.
I was just wondering which would be the better way to go for performance and stability?
The drives will be probably OEM either at OWC or NewEgg.
I'd really appreciate some help with this. Thank You.

beardedbob wrote:
I want to use the second new drive for a Photoshop Scratch disk and for temp video file work.
Under 10.3.9 - I use:
Photoshop CS2
Toast 7
Popcorn 1.0.3
VisualHUB
I suspect putting a ATA/100 drive on the ATA/66 Bus might hamper performance. And suspect using a SATA controller card in a "PCI" slot isn't as good as having a True SATA Bus, performance wise either.
I was just wondering which would be the better way to go for performance and stability?
With those applications and the intended purpose for the 2d drive, i.e. video and PS scratch, then go SATA. No question, best performance (without considering the cost of SCSI) to be found with SATA even using a PCI SATA controller. PATA been left behind, no ones doing development anymore.
I would suggest partitioning that 2d drive because PS and FS scratch disks are different in kind. FS needs unfragmented media, otherwise dropped frames and sync issues. PS scratch media are temporary and messy.
Depending on the drives and card, SATA drives should bench (with something like Intech QuickBench) at the high end of around 80-90 MB/sec. I haven't bought a PATA HD in years, but best I ever saw was around 60 MB/sec. 80-90 MB/sec is still very good even if say you can bench better in Mac Pro.
The Siig card you're considering is solid. I've used it in both 10.4 and 10.5, but only used it to boot in 10.4.x, never in Leopard. I had some issues with it my others cards, but easily solved by swapping placement.
I also have the two-port Sonnet Tempo, which is actually just a purple Firmtek Seritek 2-port card. I bought the Siig first, having to get it (and a bunch of other stuff) shipped overseas. I later bought the Sonnet because I could get it locally although for a higher price; with overseas taxes, customs, etc. for only the card --- it's a wash.
Anyway, I have two WD SE16 750GB drives in my MDD 1.25 Dual, which were originally on the Siig. With the Siig, QuickBench (I run the big 100MB files) showed 70+ MB/sec Read, around 55+ MB/sec Writes. I was a bit disappointed about the Writes. When the Sonnet arrived, I swapped and ran QuickBench again. With the Sonnet I see both Reads and Writes at 80+ MB/sec.
So as far as benchmarks go, the Sonnet/Firmtek wins. (I know Firmtek has a line of internal cards, including a 4 port version.) But I can't say I noticed any huge difference in everyday tasks. I had some sleep issues with Sonnet/Firmtek in 10.4.x, which was solved by downgrading the firmware.
I have FC Studio, but I capture to externals via eSATA.
I still have the Siig, it's in my MDD 1.0 Dual used as a file and Time machine server. Has a Seagate Barracuda 7200.11 1TB on it which doesn't bench to well on the Siig, but I haven't tried bench testing it with the Sonnet.
Hope that helps.

IGMP Problems - various - Help & Advice please!!!

I have BT infinity. In August when sports deals were announced I decided to get a vision box, never previously had one. From the start i experienced various problems, sports and multicast channels intermittently working. Only getting every other channel, losing channel after 4 and a quarter minutes, and the info bar randomly flashing up frequently.
We have had this fault outstanding with BT since then. During this time we have had a new vision box (with 512 of ram instead of 256), our Home Hub 3B (known ethernet problems) was swopped by BT for a Home hub 3A. The vision box to the hub is hardwired (ethernet cable also changed).
We have spoken at length to various BT technical support members, all giving us different opinions and advice. One spoke to us last week and advised us to remove all other wired PC's from the hub and reset the hub yet again. (previously we had 2 Pc's wired to the hub).
Since we removed the PC's the vision has been working well, better than we have ever had it. We decided to connect one of the PC's back to the hub a few days ago and the problem has returned. We reset the hub and disconnected the PC and the vision was alright again. Today we have connected a different PC and the problems are back.
The last technical person said it was IGMP (internet group management protocol) which was probably causing the problem. we are wondering if this is caused by the vision box (would a youview box instead help?) or changing the hub (would a hub 4 or 5 help).
Has anyone got any experience or advice please. This has been a real headache. Its been a long slog being passed around from person to person and have to repeat everything over and over and be told to reboot things we have done many times before.
Thanks in advance. M

This sounds similar http://community.bt.com/t5/BT-Vision/Multicast-VMC011-after-4-min-16-sec/m-p/1083966#M55445
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

AI crashes when I try to open a file or make a new one. Any advice please?

I'm using a laptop and windows. AI starts up ok but I can't actually create anything before it shuts itself down. Any advice please?

Hi Tm,
Can you please check if there are any printers installed/connected on your system ? If yes can you please un-install/disconnect them and verify again ?
Thanks & Regards,
Raghuveer

Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.

Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.

As Bob says, any iMap service can do this. GMail can, iCLoud mail can too.
Both of these can be used with Mail on any device.

Load balancing across 4 web servers in same datacentre - advice please

Hi All
Im looking for some advice please
The apps team have asked me about load balancing across some servers but im not that well up on it for applications
Basically we have 4 apache web servers with about 2000 clients connecting to them, they would like to load balance connections to all these servers, they all need the same DNS name etc.
what load balancing methods would I need for this, I believe they run on Linux
Would I need some sort of device, or can the servers run some software that can do this, how would it work? and how would load balancing be achieved here?
cheers

Carl,
What you have mentioned sounds very straightforward then everything should go well.
The ACE is a load balancer which takes a load balancing decisions based on different matching methods like matching virtual address, url, source address, etc then once the load balance decision has been taken then the ACE will load balance the traffic based on the load balance method which you have configured (if you do not configure anything then it will use the default which is "round robin"), then it will send the traffic to the servers which it has available and finally the client should get the content.
If you want to get some details about the load balancing methods here you have them:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/overview.html#wp1000976
For ACE deployments the most common designs are the following.
Bridge Mode
One Arm Mode
Routed Mode
Here you have a link for Bridge Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Bridged_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for One Arm Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for Routed Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Then as you could see in all those links you may end up having a configuration like this:
interface vlan 40
description "Default gateway of real servers"
ip address 192.168.1.1 255.255.255.0
service-policy input remote-access
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.1.1
class-map match-all slb-vip
2 match virtual-address 172.16.1.100 any
policy-map multi-match client-vips
class slb-vip
    loadbalance vip inservice
    loadbalance policy slb
policy-map type loadbalance http first-match slb
class class-default
    serverfarm web
serverfarm host web
rserver lnx1
    inservice
rserver lnx2
    inservice
rserver lnx3
    inservice
rserver host lnx1
ip address 192.168.1.11
inservice
rserver host lnx2
ip address 192.168.1.12
inservice
rserver host lnx3
ip address 192.168.1.13
inservice
Please mark it if it answered you question then other users can use it as reference in the future.
Hope this helps!
Jorge

My Z2 tablet has yellow lines appearing on screen edges. Advice please?

My tablet developed a yellow line down the left hand side of the screen fairly early on. This was shortly followed by another line along the bottom, and now one on the right. Advice please?

Definitely a hardware fault, you should have no problem getting the tablet replaced, or repaired otherwise.

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please?

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3

Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe

I have just added more storage to icloud but now want to cancel it and get a refund, any advice please?

I have just added more storage to icloud but now want to cancel it and get a refund, any advice please?

Try the suggestion by Plusco here > https://discussions.apple.com/thread/3404394?start=0&tstart=0

Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

Question ?
Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
Print head test sheets/head cleaning etc ok .
Have tried to to uninstall and reinstall but nothing.
Any advice, please?.
ps
The printer deos not show up on Epsons site but i think I have the software from Apple.
Not an ideal situation.

Try a reset > OS X Mountain Lion: Reset the printing system

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
Answer: Yes
Then "Verifying" appears at top of screen but nothing happens.
Tiscali/Talk Talk is the provider.

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

This has happened to me with a few downloads without any upsets.
You should be OK.
As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
Al

Ram advice please!

Similar Messages

Maybe you are looking for