RAM Compatibility with the Late 2012 Mac Mini Core i7 Model (MD388LL/A)

Hi,
I ordered a Mac Mini for academic use and so far I have used this thing for 2 days but the problem is I usually have a lot of programs like SPSS, Excel, and Safari open at once to multitask and the 4 GB RAM isn't cutting it. I've had one instance where 3.9 GB of my RAM was put into use and I think a major culprit of the problem is that it runs on integrated graphics which takes RAM away.
So I ordered myself some G.Skill SO-dimm RAM from newegg (thinking it would be compatible with the Mac Mini since it was 204-pin, 1600 Mhz, non-buffered or ECC memory):
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820231580
Upon reading the reviews, I found that 2-3 people had issues with their Mac Minis freezing up with the RAM stick (g.skill claims to have no tested this RAM for Mac, but the one specifically for RAM was $20 more expensive), while others say it runs fine on their Macs.
Should this work? My hope is the people who froze up got bad sticks.

Maximum Memory
16 GB
Memory Slots
2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Only use RAM meeting the above specs. Stay away from memory commonly used in PCs like GSkill. Buy your memory from OWC or DataMem, although many here also recommend using Crucial. I would not buy memory from NewEgg because almost all of their products are geared to the non-Mac market and tend to be troublesome in Macs.

Similar Messages

Can the Late 2012 Mac Mini Server run on Lion, instead of Mountain Lion?

Since I plan to use this (USB 2) device http://plugable.com/products/UGA-2K-A
on a (yet to be ordered) Late 2012 Mac Mini Server, I am wondering:
could that box run on Lion, instead of Mountain Lion ? (the usb 2 device has some M.L. issues still)
I would not really need the server-part (only want the box because of the 2 disk drives), maybe that influences things.
Would there be any possibility to order it from Apple with Lion instead of Mountain Lion pre-installed ?
Could the latest hardware in the box not-function under Lion, thereby necessitating Mountain Lion ?
Thanks to all for thinking with me!
Best,
Arie

It's simple: you cannot use a version of OS X older than the version that the Mac shipped with. At the very least, this is because the hardware may not be supported.

Will RAM from a 2010 Mac mini work with a late 2012 Mac mini?

I have two Mac minis. One is from mid 2010 and the other one is from late 2012. I am wondering if the memory modules are interchangeble.

No
The 2010 uses PC3-8500 1066 MHz modules and the 2012 uses PC3-12800 1600 MHz modules.
see > Mac mini: How to remove or install memory

Is the HDMI standard for the late 2012 Mac mini w/4000, 1.0, 1.1, or 1.2?

Hi, I can't seem to easily find this info. What is the actual HDMI standard used on a very late 2012 MacMini 6,2 with i7 and 4000 graphics?
I understand it can support up to 1920x1200 ... What standard is that? ... And will an HDMI to Display Port cable supply that resolution? Thanks -Jeff

Maybe:
Does the new mac mini have Hdmi 1.4?: Apple Support Communities
I understand it can support up to 1920x1200 ... What standard is that? ... And will an HDMI to Display Port cable supply that resolution? Thanks -Jeff
Yes

What is the Late 2012 Mac mini logic board chipset?

Just curious to know what chipset the my Mac is using.
Extra details: its the 2.5 GHz dual core entry level model.

Is this not what you asked?

My late 2012 mac mini boots slow with new ssd drive

So here is the situation. I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3, used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly. I than tested it for dozens of reboots and it worked fine. I then took apart my mac mini and removed the original hard drive and installed the new ssd drive. When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive. Aren't ssd drives supposed to be a lot faster?
My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process. Finally it can't find the drive so it boots to the ssd drive. All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart". After these steps your mac mini will now boot in about 17 seconds. Issues solved.

Yes, my solution fixed the issue. I went from a 47 to 53 second boot time to a 17 second boot time. The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini. This is my first post and I wasn't sure how to post this as a tip. I have another tip regarding usb 3.0 hubs.

Display goes black (Late 2012 Mac Mini)

Late 2012 Mac Mini (2.6Ghz Core i7, 16GB, Fusion drive).
Was previously connected to an Apple LED Display (displayport). I shuffled things around so it's connected to an Apple Thunderbolt Display and HP Compaq LA2405wg via HDMI --> DVI with the included adapter.
Everything will work fine for a while, including NIC Teaming (LACP) with the internal gigabit & Display ethernet.
Occasionally -- and especially today -- the Display will just go black, like it went to sleep. I can still hear sound, and ethernet continues to work.
Rebooting, or power-cycling the Display brings it back to life.
I also noticed today that the Display will CONSITENTLY / repeatably go black after a very short time watching a video full-screen. Full-screen video on the 2nd monitor connected to the HDMI port doesn't have this issue.
Anybody else having this problem?

I purchased the Late 2012 Mac Mini on 11/21/12.
I received the Thunderbolt Display on 9/20/11.
It just blacked-out on me AGAIN, and this time neither power-cycling nor rebooting brought it back.
I plugged in my old LED Cinema Display (displayport) into the Mac Mini until I can get this sorted out.

What years apple cinema display can I connect to the new 2012 mac mini?

I have a 23" Apple Cinema Display that I purchased in 2007. I currently have it connected to m7 2009 Mac Mini. Can I use it with the new 2012 Mac Mini? I am running the latest OS on my 2009 Mac Mini. I want to upgrade my Mac Mini for more storage a nd the faster processor.

Yes. You can connect it to the Mac Mini's HDMI port with the HDMI to DVI adapter that comes with the new Mac Mini, or you can connect it to the Thunderbolt port with a Mini DisplayPort to DVI adapter.
<http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

Upgrade logic board in late 2012 Mac Mini?

Can I upgrade the logic board in the late 2012 Mac Mini? I have a dual core and I see 2.6 quads out there. Just wondering if it just works by swapping it out.
thanks!

thanks! I don't intend on buying for about a year and by then all the used Quad minis will be a year older; the replacement Logic boards will still be new. Unless I can find a quad core mini still in box.

I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

A few places online may still offer the i7 2.3GHz quad-core Late 2012 MINI (Oct 2012 to Oct 2014)
that allows the user-upgrade of RAM to 16GB, and this one I've seen is a Server model and has
two 1-TB Hard Disk Drives. The B&H store in NY online has this listed, if in stock now, price &
shipping in continental US is good until tomorrow.
Your i5 dual-core is still desirable to many, & you may be able to resell it if not needed.
Good luck & happy computing!

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ

Fios Quantum not working with Late 2012 Mac Mini

A new router came out from Verizon in late 2014 so I went ahead and upgraded for $150. After connecting 3 iPhones, an iPad, and 2 Windows laptops successfully I discovered that my Late 2012 Mac Mini would not work.
Found a random blog post about channel settings, and after some tinkering got it to work. Basically you need to change the channel settings from Auto to alternate values. The blog I found said to use 1,6, or 11 for 2.4ghz and a low value for 5ghz. I tried a few and ended up with channel 6 and 40 as a working pair. Thought I would share.

I thought about your dilemma while ASC was down, that's good news your welcome!
I spent some of the time replacing the 320GB 5400rpm HD in my 2010 Mac Mini with a 500GB Hitachi Travelstar 7200rpm HD. Then moved forward by Restoring Mountain Lion onto it from an External HD, instead of Snow Leopard from the original 5400rpm drive. I really prefer to keep my music and photos on the Internal HD and so I couldn't justify the cost of a larger SSD.
So basically I flip flopped and now running Mountain Lion on a larger/slightly faster Internal HD and Snow Leopard from a FireWire External HD when needed.

Thunderbolt Port problem with (Late 2012) Mac Mini

I am connecting a (Late 2012) Mac Mini to an HP 2311xi monitor with a MiniDisplayPort-to-DVI-D cable plugged into the Thunderbolt port.
After the connection, the Thunderbolt bus Port Status in Systems Information states "No device connected".
However, the monitor works fine, just as well as when I am connected to the HDMI port (but without the blinking screen...).
The problem is that the TB port drops the video signal when I put the Mini to sleep. The monitor will not go into sleep mode (as it does with the HDMI connection) but flashes "No signal" which seems to wake up my Mini's hard drive. It spins up but there is nothing on the screen.
I'd appreciate any help on this, including the mystery of why there is "No device Connected" in Systems Information.
Thanks in advance.

I thought about your dilemma while ASC was down, that's good news your welcome!
I spent some of the time replacing the 320GB 5400rpm HD in my 2010 Mac Mini with a 500GB Hitachi Travelstar 7200rpm HD. Then moved forward by Restoring Mountain Lion onto it from an External HD, instead of Snow Leopard from the original 5400rpm drive. I really prefer to keep my music and photos on the Internal HD and so I couldn't justify the cost of a larger SSD.
So basically I flip flopped and now running Mountain Lion on a larger/slightly faster Internal HD and Snow Leopard from a FireWire External HD when needed.

Programs repeatedly crashing on my late 2012 Mac Mini Fusion Drive

I have a late 2012 Mac Mini Fusion Drive 2.6ghz, 16gig RAM running Mac OSX 10.9.4 . For the past week or so I have had a number of programs - both Apple and third party apps crash repeatedly, I have repaired permissions and restarted numerous times but nothing seems to fix it. For example Mail would crash each time I cancelled a password being accepted by Mail in a particular account, Safari has crashed for various reasons. Apple Motion has also crashed more times in the past day or so than it ever has in the past year. It's crashing when I try to add a point or node to a line in an animation I'm finishing.
Does anybody have any idea why this is happening now and does anybody know how to fix it?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Late 2012 Mac Mini - Random spinning beachball then crash.

Hi,
I have a late 2012 Mac Mini bought last summer. Since the early days I would randomly get the spinning beach ball and there was no bringing it back. A re-boot would be required. I upgraded to Yosemite and the issue still occurs. I could literally being doing any everyday activity. Browsing the web. Scroll through a quicktime video and it just happens. Now it will crash and I get a grey screen with a folder and blinking question mark. Now I know what that means but then when I reboot the Mac Mini it starts up again. Hardware test finds no faults. I was going to try a clean install but just wanted to get some opinions if possible. Thanks in advance.
EtreCheck version: 2.0.11 (98)
Report generated 23 November 2014 18:44:43 GMT
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL P2014H 1600 x 900 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:52:1
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (390.02 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Logitech USB Receiver
Apple Inc. Apple Keyboard
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] org.virtualbox.kext.VBoxDrv (4.1.6) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.1.6) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.1.6) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.1.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) Support
[loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[not loaded] com.leapfrog.codeless.kext (2) Support
[not loaded] com.leapfrog.driver.LfConnectDriver (1.10.5 - SDK 10.8) Support
Launch Agents: ℹ️
[invalid?] com.adobe.AAM.Updater-1.0.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.leapfrog.connect.authdaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.stclairsoft.AppTamerAgent.plist Support
User Launch Agents: ℹ️
[running] com.leapfrog.connect.monitor.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
iPhotoPhotocast: Version: 6.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
EPPEX Plugin: Version: 4.1.0.0 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
Slick Savings
Searchme
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Logitech Control Center Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      19% mds
      5% WindowServer
      0% com.apple.WebKit.WebContent
      0% fontd
      0% AppleSpell
Top Processes by Memory: ℹ️
241 MB com.apple.WebKit.WebContent
107 MB mds_stores
73 MB Safari
64 MB Finder
56 MB WindowServer
Virtual Memory Information: ℹ️
704 MB Free RAM
1.78 GB Active RAM
1.10 GB Inactive RAM
717 MB Wired RAM
1.74 GB Page-ins
0 B Page-outs
This is also the begging of the crash report the system provide after reboot. If this helps.
*** Panic Report ***
panic(cpu 0 caller 0xffffff80221c4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 0), Frame : Return Address
0xffffff802962be50 : 0xffffff8021d3a811
0xffffff802962bed0 : 0xffffff80221c4594
0xffffff802962bf40 : 0xffffff80221c425c
0xffffff802962bf50 : 0xffffff802224dcb2
0xffffff802962bfb0 : 0xffffff8021e3ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14B25

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

RAM Compatibility with the Late 2012 Mac Mini Core i7 Model (MD388LL/A)

Similar Messages

Maybe you are looking for