RAM differences and compatibility?

I have a G5 2.5 gig that takes DDR PC3200 kind of memory. Will a slower DDR PC2700 memory work in it? Is memory backwards compatible? thanks!!
G5 2.5 Mac OS X (10.4.7)

when in doubt, check the specs from Apple or head over and see what Crucial recommends for your system.
http://www.crucial.com/mac/
Easy to use their memory selector and they put all the specs up front.

Similar Messages

Early 2013 13" MacBook Pro runs slow and uses a lot of RAM, why and what can be done?

Problem description:
My computer is using a lot of RAM. Wondering if there’s a hardware issue, or a software issue, or something else. I currently have no programs open in the Doc, besides EntreCheck. and the RAM is showing about 75% used. I’m looking for suggestions on what I can do to speed it up and make it more functional, and efficient for doing design work. I recently upgraded from the original 4GB RAM (2x2GB), and from the original HD to a 512 GB SSD drive, and upgraded to Yosemite. Perhaps that was too much for this machine? Please help with anything that I can do to make it better! Thanks in advance!
I have a recent back-up, I'm open to saving user files and starting from scratch with the current hardware, etc... but would need some direction on how to do this. I did upgrade myself using Apple provided instructions.
Here are the EntreCheck results:
EtreCheck version: 2.0.11 (98)
Report generated December 2, 2014 at 12:45:57 PM EST
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Verified)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 2 days 0:17:23
Disk Information: ℹ️
    Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        SuperCool (disk1) / [Startup]: 510.88 GB (320.22 GB free)
            Core Storage: disk0s2 511.25 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Microsoft Microsoft® Nano Transceiver v2.0
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Western Digital My Passport 070B 319.37 GB
        S.M.A.R.T. Status: Verified
        EFI (disk2s1) <not mounted> : 210 MB
        NATURE2020 (disk2s2) /Volumes/NATURE2020 : 319.03 GB (169.27 GB free)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [failed]    com.apple.security.cloudkeychainproxy.plist
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ctkd.plist
    [failed]    com.apple.icloud.findmydeviced.plist
    [failed]    com.apple.nehelper.plist
    [failed]    com.apple.nsurlsessiond.plist
    [failed]    com.apple.wdhelper.plist
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
    [running]    com.hp.productresearch.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [invalid?]    com.adobe.SwitchBoard.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
    [running]    com.surteesstudios.hddfancontroldaemon.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [invalid?]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
    [loaded]    com.google.keystone.agent.plist Support
User Login Items: ℹ️
    GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
    iTunesHelper    UNKNOWN (missing value)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Google Drive    ApplicationHidden (/Applications/Google Drive.app)
    Dropbox    ApplicationHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
    CouponPrinter-FireFox_v2: Version: Version 1.1.6
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
    AllMyTube
3rd Party Preference Panes: ℹ️
    Flash Player Support
    Growl Support
    HDD Fan Control Support
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        SuperCool: Disk size: 510.88 GB Disk used: 190.66 GB
    Destinations:
        NATURE2020 [Local]
        Total size: 319.03 GB
        Total number of backups: 4
        Oldest backup: 2014-09-10 17:52:44 +0000
        Last backup: 2014-11-19 21:23:34 +0000
        Size of backup disk: Too small
            Backup size 319.03 GB < (Disk used 190.66 GB X 3)
Top Processes by CPU: ℹ️
        22%    mds
         6%    WindowServer
         4%    Creative Cloud
         3%    Dropbox
         0%    Google Drive
Top Processes by Memory: ℹ️
    223 MB    Finder
    137 MB    mds_stores
    120 MB    Dropbox
    86 MB    Creative Cloud
    86 MB    WindowServer
Virtual Memory Information: ℹ️
    2.08 GB    Free RAM
    2.82 GB    Active RAM
    1.64 GB    Inactive RAM
    1.59 GB    Wired RAM
    14.83 GB    Page-ins
    2.06 GB    Page-outs

Lex...
Here's the new EtreCheck that I just ran. At a glance, it seems I may have missed deleting some things or they are stored in an additional location? I haven't jumped into anything yet to really test if there's a difference in performance for me. Once I do I will post that information.
EtreCheck version: 2.0.11 (98)
Report generated December 3, 2014 at 8:46:56 AM EST
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Verified)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 12:43:15
Disk Information: ℹ️
    Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        SuperCool (disk1) / [Startup]: 510.88 GB (322.45 GB free)
            Core Storage: disk0s2 511.25 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Microsoft Microsoft® Nano Transceiver v2.0
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [running]    com.adobe.AdobeCreativeCloud.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.google.keystone.agent.plist Support
User Login Items: ℹ️
    None
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes: ℹ️
    Flash Player Support
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        SuperCool: Disk size: 510.88 GB Disk used: 188.43 GB
    Destinations:
        NATURE2020 [Local]
        Total size: 319.03 GB
        Total number of backups: 4
        Oldest backup: 2014-09-10 17:52:44 +0000
        Last backup: 2014-11-19 21:23:34 +0000
        Size of backup disk: Too small
            Backup size 319.03 GB < (Disk used 188.43 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         1%    launchservicesd
         0%    launchd
         0%    fontd
         0%    Core Sync
Top Processes by Memory: ℹ️
    103 MB    mds_stores
    86 MB    Creative Cloud
    86 MB    Finder
    77 MB    WindowServer
    60 MB    systemstatsd
Virtual Memory Information: ℹ️
    3.93 GB    Free RAM
    2.28 GB    Active RAM
    900 MB    Inactive RAM
    1.48 GB    Wired RAM
    2.25 GB    Page-ins
    0 B    Page-outs

NTSC vs PAL: difference in compatibility

I wonder if there is a difference between compatibility of NTSC and PAL camera's of the same model. Checking on the supported camcorder list one can read the Sony HDR XR500 is compatible for NTSC but isn't mentioned in the PAL list.
http://support.apple.com/kb/HT3290?viewlocale=en_US#2
I'm thinking of buying this camera in a PAL version and use iMovie09 and FCE 4. Does anyone knows of this will work without any third party software?
Thanks in advance...

I have heard that there is no such a thing as NTSC HD or PAL HD and that HD is just HD regardless of the country it's in. Is that true?
Yes, its true. As far as "definition" goes, there is no difference between a 1080 image shot in a PAL region and a 1080 image shot in an NTSC region. However, which frame rate you intend to shoot at eg 50i / 60i, 25p / 30p etc will certainly make a difference. Most consumer level HD camera's are restricted depending upon the electrical frequency of the market region they are being sold in. If your camera was purchased in a 60Hz ( NTSC ) region then its likely your camera will only support 60i, 30p 24p etc. If its purchased in a 50Hz (PAL) region then it's likely to only support 50i, 25p etc.
Generally it is only the higher end pro camera's that support switching between systems ... neither the HV20 nor the XH-A1 have this capability.
Could I rent an HD camera in Europe and shoot stuff with it there and then bring the resulting tapes back here to the U.S. and play them on my U.S.-purchased HD cameras and decks and load it into my current FCP setup in L.A. without any problem?
Well that would depend on what camera you rented as compared to what your current setup is ... what's your current setup and what do you have in mind to rent?

Brand new laptop, tried to install Ram upgrade and computer won't turn on (no bios, nothing)

I got my new qosmio x70 yesterday with a ram chip I ordered online. When I install the chip into either ram slot, the computer won't boot. It won't even turn on.
When I click the power button, the light aournd the button turns on for a moment then off again. That's it.
I thought maybe I could make a bios change, but there are NO memory options in bios. I also tried both ram chips from my old Qosmio (3 years old) and they had the same problem. Any ram that touches my machine disables it. Am I going to have to send back my brand new toy already!?
Solved!
Go to Solution.

Qosmio X70-ABT3G22 part # PSPLTU-0E2069
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200007040
Toshiba's memory just enter your part number PSPLTU-0E2069 see here- http://www.toshiba.com/us/laptops/memory-finder
Here is what Crucial recommends - http://www.crucial.com/store/listparts.aspx?model=Qosmio%20X70-ABT3G22&Cat=RAM -click on all compatible ram to see all available ram single and pairs.-
I have used Crucial to order in the past because they guarantee compatibility and you should not have any issues with ordering from Toshiba either. The memory you posted may work, looks like the same specs but I don't want to be the one to tell you it will work incase you have trouble with that one.
Here are memory spec terms from the crucial site to help understand what they mean.
Memory spec terms
If you're not sure if a module is right for your system, use the Crucial Memory Advisor tool for a list of guaranteed compatible modules.
NON-ECC/Non-parity— Most desktop and laptop computers take NON-ECC or Non-parity memory.
ECC/Parity— ECC or parity modules look for errors in data and are most often found in servers and other mission-critical applications used by large networks and businesses.
Unbuffered— Most PCs and workstations use unbuffered memory which is faster than registered memory.
Registered/Buffered— Registered or buffered modules delay all information transferred to the module by one clock cycle. This type of memory is primarily used in servers.
Fully buffered— Designed for next-generation servers, features an advanced memory buffer.
CL— CAS (column address strobe) latency, which is the number of clock cycles it takes before data starts to flow after a command is received. Lower CL is faster. Modules with different CL can be mixed on a system, but the system will only run at the highest (slowest) CL.
Component configuration— (For example: 64Meg x 64) Indicates the size of the memory chip components on the module.
Voltage — For example 2.6V. Indicates the power used by the module. The lower the better
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank you

Please refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree

IMac 8.1 3.06 GHz w/6 MB Ram, Lion and dead HD? all I get is "Gray Screen w/wirlie gig" but now for a new twist a circle with a diagonal line, like don't go. Is this a DEAD HD?

          I have a iMac 8.1 3.06 GHz w/6 MB Ram, and was running Mac OS X 10.6.8. My 500 GB WD5000AAKS was about 90% full. I had an issue with the admin password, it would not accept any of my known passwords. I ran for a while on the fingerprint reader I had, we have two users on the machine in our home. I tried many attempts to fix this problem without success I came up with a plan. That plan was a new HD, used a 2TB Samsung. plan worked like a charm. Installed a 4 GB Ram Chip and the new Samsung, formatted it, loaded Snow Leopard, and loaded what was on my Time Machine backup all was good.
          This was early July, then Lion was available I was happy with what I had, I had 1.450 TB of free space. So, what the heck, lets spring for Lion, that even went well for a not even 2 weeks, enough that I had several Time Machine backups.
           Then monitor goes flash, flash then I try a re-boot same gray screen with whirlie gig that I had when the the HD in my MacBook Pro died. Put the old 500 GB WD back in and all was fine, ran for a day. It was OK except back to no password and full. Went down to my local computer shops here in Rayong Thailand and sprung for a New 2 TB WDXXX, put that in, used my Snow Leopard disk to format and load OS X 10.6.8. I though that all was good, the load from Time Machine was slow and the time remaining was changing all the time, took about 3 hrs for about 300 MB that where on the LaCie.
          Now I have a password issue, however it asks for a password reset that it will NOT take and I don’t even get that now. All I get is the infamous “Gray Screen w/wirlie gig” but now for a new twist a circle with a diagonal line, like don’t go. Is this a DEAD HD? I plan to re-install the old 500GB just to systems check and if all is well I will take the “NEW” 2 TB WD back for replacement. I am thinking that I should put the new HD in and format and load Snow Leopard then up date to Lion then do my Time Machine backup. The only problem is does the circle with the diagonal line mean something more? If so how does one recover Lion with no disk if that is what I need to do. Yes, I have tried control “R” on boot, nadda, no response, “mai dee” no good. Ideas, please.

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

How to calculate difference and percentage in matrix report dynamic columns in SSRS 2008

Hi Friends,
I need to calculate Difference and Percentage In matrix report SSRS 2008
1) Row grouping based On Product
2) Column Grouping Week and Fiscal Year Current week and Previous Year same Weeks
3)Data Invnetory(Value fileld)
Example:
If value1 and Value2 Available we need to calculate Percentage and Difference.Otherwise Not required NA I need to Show.
For example If Particular week,Current year data is available,Previous year week data is not available No
need to cal Diff and Percentage we need to show Empty.
Below Code is working for If two values is available.
If any one of the fiscal year week data is not there it's taking some garbage values.
I tries with If condition in GetPCT() and GetDiff() It's not working.
Can some one please help me on this.
I am using the custom code
Public Shared Value1 as String
Public Shared Value2 as String
Public Shared previous as string
Public Shared previousweek as string
Public Shared Function GetValue(Value as String,partner as String,Week as String) as String
If partner =previous and Week =previousweek Then
Value2=Value
Else
previous=partner
previousweek=Week
Value1=Value
End If
return Value
End Function
Public Shared Function GetDiff()
return Value2-Value1
End Function
Public Shared Function GetPct()
return (Value2-Value1)/Value1
End Function
How to handle this.
Thank You, Manasa.V

Hi veerapaneni,
According to your description, if one of the fiscal year week doesn’t have data, the custom code returns false results.
For your requirement, if NULL value exists in the database, we should replace it as zero then perform calculate. So within the code, we should judge whether the value is NULL. To achieve your goal, please refer to the steps below:
1. Create a table like below.
create table dif4
([Product Group] varchar(50),
[Week] varchar(50),
[Fiscalyearweek] varchar(50),
value int
insert into dif4 values
('Desktops','W01','FY14W01',0),
('Desktops','W01','FY15W01',45),
('Desktops','W02','FY14W02',null),
('Desktops','W02','FY15W02',30),
('Desktops','W03','FY14W03',12),
('Desktops','W03','FY15W03',50),
('Notebooks','W01','FY14W01',35),
('Notebooks','W01','FY15W01',56),
('Notebooks','W02','FY14W02',45),
('Notebooks','W02','FY15W02',87),
('Notebooks','W03','FY14W03',75),
('Notebooks','W03','FY15W03',105),
('Tablets','W01','FY14W01',34),
('Tablets','W01','FY15W01',46),
('Tablets','W02','FY14W02',49),
('Tablets','W02','FY15W02',96),
('Tablets','W03','FY14W03',42),
('Tablets','W03','FY15W03',113)
2. Add the custom code in the Report Properties.
Public Shared Value1 as Integer
Public Shared Value2 as Integer
Public Shared previous as string
Public Shared previousweek as string
Public Shared Function GetValue(Value as Integer,product as String,Week as String) as Integer
If Value=Nothing Then
Value=0
End If
If product =previous and Week =previousweek Then
Value2=Value
Else
previous=product
previousweek=Week
Value1=Value
End If
return Value
End Function
Public Shared Function GetPct()
If Value1=0 Then
return 0
Else
return (Value2-Value1)/Value1
End If
End Function
Public Shared Function GetDiff()
return Value2-Value1
End Function
3. Design the matrix like below.
4. Then get the expected results.<o:p></o:p>
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have

My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have 4.50/4.80 gb left and Mid -2012 model Macbook Pro what could be the problem also it started freezong when i upgraded to Yosemite and now my mac freezes once im logged into and sometimes has problem booting up either freezing or agent secuity error black screen??!!!!

My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have 4.50/4.80 gb left and Mid -2012 model Macbook Pro what could be the problem also it started freezong when i upgraded to Yosemite and now my mac freezes once im logged into and sometimes has problem booting up either freezing or agent secuity error black screen??!!!!

Problems with Apple Preview filled forms and compatibility with Windows?

Anyone else having problems with Apple Preview filled out forms and compatibility with Microsoft Windows after Lion?
I've had it happen recently with two different people, where the data I had entered on a fillable PDF form could not be seen by Microsoft Windows, but I saw my data just fine.
I don't know what version of Adobe Acrobat they were running.
Thanks,
kt

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Where's the music on iTunes, and what's with the quality and compatibility?

I'm just curious as to whether anyone else has had this issue or not: Does anyone else feel like, after searching for specific songs, there's just little to nothing in the database? I feel like most of my searches are pointless because iTunes has either no data of my requested search and/or only has bits and pieces of it.
Another question I have: After having a slightly successful search, why am I left with low quality tunes? I mean, you can hear the compression... badly. (I know it's not my speakers)
Last question: If I'm paying for the song, shouldn't I be allowed to download a universal file? iTunes uses a unique format that no other application uses. In other words, more money has to be spend for m4a to mp3 converters (unless you're a cracker [not a racial comment]).
To me, I value iTunes and its team, so I'm sorry if I've offended anyone. I understand there are contracts involved with the artists and it's hard to please ALL of the subscribers. But seriously, where's the music on iTunes, and what's with the quality and compatibility?
Custom Windows XP Pro Negative, I am a meat popsicle.

Today I thought of finally putting lyrics on my songs. So I've been quite some time busy doing that, then I tried it on my iPad (2) and I can't find them. Just as the people above say. Then I went to search where I can find them and I found this page. I'm really dissapointed and I don't understand how something like this could happen. So I hope Apple will fix this soon.
(I'm just posting this so that Apple will do something about it)

An anyone help me to find the difference and relation between the following

Hi,
can anyone help me to find the difference and relation between the following methods of Swing :
a) validate()
b) invalidate()
c) revalidate()
d) repaint()

You'd be far ahead by opening up the API and Java turorial and your course book and learning for yourself, rather than, asking other to do your homework for you.
But if you have andwers already to go, then post them and ask if you have drawn appropriate conclusions.

Which slot do I take the ram out and put the new in?

I have a 24" iMac 2.33GHz with 2 gigs of ram. On my imac I can only put a total of 3 gigs. So Currently I have (2) 1GB modules each in both ram slots on my imac. So that means I have to remove pone of the 1GB chips and put in the new 2GB module I bought from crucial. So after shutting down the computer, unplugging everything, and setting it on a table, my question is:
WHICH 1GB ram do I remove? The left(looking at the front of the imac), or the right (looking at the front)?
I will be installing it in later tonight so ANY help is greatly appreciated.

It does not matter which module comes out, however I would suggest that you remove the frontmost module simply to make it easier to remember which module has been replaced.
Actually, you will have to take one more step before you replace your ram module.
Take the cover off before you replace the module. It will go a LOT smoother!
Just kidding. You pretty much have it down pat.
Seriously, just remember to ground yourself before touching the ram module and do NOT touch the contacts on the module.
Hope this helps

What's the difference and purpose of Keywording and metadata such as title and caption etc?

What's the difference and purpose of Keywording and metadata such as title and caption, crator, sublocation , label etc? Where & how is the information used? Where does it appear?

Keywording is primarily for your own use for finding photos fast.
Title, Caption, etc are also for your own use but can be used by your clients or your stock company if you do not <Minimize Embedded Metadata> on export. Keywords are also included on export but are hardly of any use to others - unless you follow a standard for keywording.
You have the option of selecting title, caption, etc to appear in a Slide Show, on Print, or on a webpage created with LR.
If you go to the LR Help menu and type "title", or "caption" in the search box you will find plenty of advice for this.
WW

I am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

yes you can do it and not void the warranty. Those are the only hardware changes that Apple permits. Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.

OID 10gR3 full version number and compatibility

I am a bit confused about the OID version and compatibility. Can anyone help?
Siteminder r12 is compatible with OID 10gR3 as per Siteminder compatibility matrix.
When I try to find OID version number and in turn its compatibility with Operating system and database, I am finding it hard to understand which version I should be looking for when I want to use OID 10gR3 (e.g. is it 10.1.4.0.1 or 10.1.4.1 or 10.1.4.2 etc)
There is no clear documentation providing this information. From one of the documents (www.oracle.com/technology/.../internet_directory_wp_10gr3.pdf) it seems it is 10.1.4.2
However when I goto download site it only has 10.1.4.0.1.
Also, as per certification matrix of OID 10.1.4 it says it is compatible with OEL5, whereas after downloading 10.1.4.0.1 it fails to install complaining that it needs Red Hat Linux 3 or 4.
Need you help to understand this.
Thanks,

The Base line version is 10.1.4.1.0, all others are patches. The latest being 10.1.4.3.0, which can be downloaded via MOS (formerly known as Metalink).
10G release 3 is marketing speak; 10.1.4.1 thru 10.1.4.3 are all 10G Release 3 (but different patchlevels. Guess you can speak of OID 10G release 3 patch 2, when you mean OID V10.1.4.3.0 - technicians tend to use versions).

RAM differences and compatibility?

Similar Messages

Maybe you are looking for