Ram for a Quicksilver 867mhz

hi folks,
i'm buying second hand ram for my quicksilver. i know it needs pc133 sdram. this guy selling me this ''Samsung 512 MB PC2100 DDR RAM (M368L6423DTL-CB0' says it compatible. I have tried googling but am limited in my undestanding.... is it compatible? Also a second question is this also compatoble Seagate 3.5" 160Gb IDE HDD a and will i be able to access the 160 gig if i install leopard? i read that this model can acccess 12O IN TIGER? thanks in advance!!!!

Hi-
The Quicksilver uses PC133 RAM.
PC2100 is NOT compatible.
Compatible memory here:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=156&type=Memory&TI=3 759&shoupgrds=Show+Upgrades
If you use a 160GB drive, Tiger or Leopard, you will have access to 137GB after format.
The 160GB drive is fine, as you only lose about 10GB due to drive capacity support limits of the machine.

Similar Messages

  • Buying RAM for Quicksilver

    I am thinking about buying this RAM. there are two specs that bother me about it.
    1: it's only 2.5 volts and Apple says a Quicksilver requires 3.3 volts
    2: it says it is a dual 512 MB card. I read in an Apple article that no memory gains are seen when two DIMMS of the same size are installed. My J21 slot has 512 MB in it. Does a dual 512 MB in J22 improve memory or no?
    1gb RAM Kit (2x512mb)Omni Optival RAM
    OPTIVAL™ OMNI TECHNOLOGIES® BRAND 512MB x 2 PC100/133 DIMM SDRAM 168 PIN, Gold Lead, DIMM 64x64, SDRAM 32x8, Unbuffered, Non-parity, 64bit, 16 chip, CAS 2.5, 7.5 ns, 2.5 volt

    Hello,
    I've just added older Infineon 512MB SDRAM into my Quicksilver and it works and this RAM isn't offered at ANY apple shop. Try to check developer note about your model (search on developer.apple.com for "PowerMac G4"), there is a section about RAM requirements in great detail. Usually if you try google: "type of your ram", you'll find similar specs on the site of manufacturer. If they match, no problem. If they don't match - 90% it won't work. Care about number of units (has to be 16, 8 on each side of RAM for 512MB pieces)
    It's just my opinion, but I think that there is no need to pay extra money just for RAM which is recomended by OWC or any other apple shop. I think most reliable source of information is detailed specification provided by manufacturers.
    I guess "1GB RAM kit" is just "psychological trick" to sell better - eg. it's generally known, that 1GB DDR dualchannel kit consisting of 2x512MB pieces can be faster than single 1GB piece in some computers. Nothing to do with SDRAM, which you need.

  • Stock Quicksilver 867Mhz 2001: Max internal drives?

    I am a little unclear on maximum drive expansion possibilities with this machine.
    a) 3 lower internal drive bays:
    Documentation says "Support for up to two internal ATA drives". Currently I have 2 drives in the U-shaped drive carrier in "Drive position 3". I see an unused power connector. Can I put a 3rd HD in one of the empty lower bays "as is"? Not at all? Or with some additional hardware?
    b) 2 upper bays:
    One is occupied by the original SuperDrive.
    Documentation says I can put in an "optional Zip drive in the other upper bay". This bay's metal container looks smaller than the SuperDrive one. Is this only for Zip drives - or can a second DVD burner go in there? Or do I have to replace the original SuperDrive to have a faster CD/DVD drive (i.e. Lacie DVD+-RW Internal drive with LightScribe 16x)?
    TIA
    Power Mac G4 Quicksilver 867Mhz 2001   Mac OS X (10.3.9)  

    Hi TonyCMac,
    Firstly, welcome to the discussions.
    You can put a third drive into the lower bay, but you will need to run it either off the bus for the optional Zip drive (which is quite slow), or via a PCI controller card.
    You can put a second DVD burner into the free upper drive bay, but it will involve physically modifying the Mac because the bay in its present state is not big enough.
    I have seen a thread (which I don't think is accessible anymore) which describes the bay enlargement process, and it is quite involved, and only for the adventurous handyman.
    Cheers!
    Karl

  • Are there suggestions for managing Multiple VMWare Fusion systems sharing files with a MacBook?  Suppose I have enough ram for 3 servers to share files.

    Suppose I have enough ram for 2 or three VMWare fusion systems to that could benefit from file sharing.  Is it possible to configiure each VMWare funsion instance to have a common read only file share on my desktop and a common read/write area on on my desktop? 
    This would allow me to extend the power and mustle of my Mac Book Air, Retina Display system to its best advantage.  Whether native Mac processing or speciality linux or Windows systems as needed.
    I am having trouble allowing more than one system to share the same read only and the same read/write areas so that software does the file locking and merge controls.  Even if these do not share a common read/write area, it would be truly handy for drive space management for them to share a common read only area.
    Thanks for your thoughtful input.
    20 year IT Professional that loves Mac visual interfaces, outstanding performance and a *nix command line. 
    Don

    It really denpends on the os running in the vm and what the permissions are set to on those shares.
    I run a few vms on both a mac at home and windows at work and all other computers in my home or at work can connect to the vms without any problems. Even multiple computer at the same time.
    It also depends on how you have set the vm up for networking. If you are setting it up as nat, instead of bridged, that can also cause problems access it from multiple system. With nat the vm is on its own network branch.

  • What's the best Airport card for a Quicksilver Mac?

    Way back in 2001/2002 when I bought my Quicksilver (dual-gigahertz), wireless stuff was pretty new. I didn't have any routers and there was no need for an Airport card. Over the next year or two, I started to accumulate more computers and roommates with computers. As it so happens, the very day I came back from a several week-long job and decided to finally purchase an Airport, that was the very same day of the Mac Conference and Steve Jobs introduced a fancy new Airport Extreme that had the new 802.11g technology. Well, needless to say, my order took a little longer than forever to arrive, and when it did, I found that they had accidentally sent me an Airport Extreme Base Station instead of the normal Airport Base Station that I ordered (802.11b). However, they did not accidentally send me an 802.11g card for my Quicksilver.
    So, for years now, I've been using my Mac with a 802.11b card in it. For the rare times that I've had to transfer a significant amount of files between computers (and I didn't have an external drive that I could swap back and forth) I'd usually just leave the computer on overnight because it takes an extraordinarily long time to transfer at 802.11b speeds.
    Now, I've recently purchased an Apple TV. It's constantly syncing up movies and video podcasts and now the difference between the 802.11b and 802.11g speeds are becoming more and more noticeable.
    So, my first question is, can I even upgraded it? My preliminary searches have found the 802.11b card has been discontinued, is there another option?
    My next question, if it is possible to upgrade, is what is the maximum network speed I can possibly achieve wirelessly? I tend to upgrade components, and if - at some point in the future - I upgrade my airport to 802.11n and I have another device with 802.11n capability, can I upgrade my Quicksilver to be able to communicate with that device at 802.11n speeds? Or does it look like 802.11g is going to be the max I can get?
    Thanks!

    You can get a 5770 radeon ATI MAC card
    Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards. 
    Buy it from Apple online store or B&H photo or Macconection
    And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
    I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

  • How can i allocate more RAM for my onboard video card on a 2011 macbook pro 13 inch running windows 7 via bootcamp

    I noticed that since Macbooks.. macs in general use an EFI instead of BIOS.  . .. Now i need to allocate some more RAM for the onboard video card since its currently running with an estimated 50mb.. I would like to increase this to 512  and cut the 3.95 down to 3.5 MB for the rest of the system ( allowing me to run more graphic intensive games and the such ... ) I know this could slow down the entire system.. ( i am aware of this ) and have gotten a 3rd party application to control and close out uneeded processes during gaming.. I just need more ram for my onboard video card.. Any help?

    You don't allocate more RAM towards your video card, you put more RAM into the machine and hopefully some machines will bump the CPU graphics RAM allocation up a little.
    The problem is you bought a integrated only graphics computer, if you want to 3D game you need a dedicated graphics computer with it's own or dedicated VRAM.
    If your this serious about 3D gaming, your on the wrong platform.
    Get a Windows 7 64bit i7 8GB RAM expandable 3D gaming tower with a good power supply and video card upgrade path, this way every few years you buy and stick in a new video card to play the latest games.
    Mac's are not gaming machines and never will be because they would last too long if we could upgrade them.
    http://www.cbscores.com/index.php?sort=ogl&order=desc

  • Bought ram for Macbook 4,1 and wont boot up

    Hey guys i just bought some new ram to upgrade my macbook 2.1 Ghz Intel Core 2 Duo running Snow Leopard 10.6.8 and it says its the right ram for it but it doesnt boot up. the RAM i bought is 2GB PC5300/667Mhz DDR2. i bought 2 modules to equal 4GB and it doesnt boot. i tried one stick, both sticks, one new and one old, still nothing. the disk drive runs but thats all. So either i got bad ram or they labled it wrong? What can i do besides return it?

    If you bought your RAM at a place that also sells PC RAM you may have gotten mislabelled RAM. PCs can handle different RAM speeds so they’ll often label higher speed RAM as a lower speed rather than make two different speeds of RAM. But Macs are much more picky. They require a RAM stick to be exactly 667mhz not 675mhz or 800mhz. The way to tell is to put one of your old RAM sticks in and it will force the new RAM to run at the correct speed.
      This is from one review of PNY RAM:
    "These modules are actually 800Mhz. PNY no longer makes or sells 667Mhz modules. Not all computers that require 667Mhz are compatible with 2 800Mhz modules. They refuse to down clock properly. This is especially true with a number of Core 2 Duo MacBooks. Spoke to PNY support, they flat out told me that yes, they sell 800Mhz modules in 667Mhz packaging. If you RMA a module that is 667Mhz (or supposed to be 667Mhz) they will replace it with an 800Mhz module as they no longer have any 667Mhz SODIMMs, not even for RMA replacement!"
    These are good online stores for Mac compatible RAM
    OWC 667Mhz RAM
    http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
    Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
    Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.

  • Ram for G3 RevA Mini-Tower

    Hello all again. Next ussue: want to upgrade from 320ram to 512 or more. I once a while ago installed a 256mb stick to upgrade to 320mb, recently got another from the local mac guy, PC100, 256mb, and the Mac only reads it as 128mb. What's up with that? And what do I need? And where do I find it?
    Thanks in advance.

    Hi James,
    I wager the chip that shows up at 1/2 its rated size in a hi-density module, with eight devices only on one side. A 256MB module for the Beige needs low-density or 8 devices on EACH side.
    I've used one company, Data Memory Systems, exclusively for RAM for over three years and can't complain a bit. I get PC100 RAM by choosing the Blue & White G3 from their selector:
    http://www.datamemorysystems.com/memory-information/256MB_SDRAM_PC100_CL2_DIMM_Apple555.asp
    This works great in my Beige G3 and the price is pretty good.
    (I have no relation with the mentioned form other than as a happy customer)

  • RAM for 2003 Power Mac?

    I am selling 2GB - (4) 512 MB DDR DIMM,P RAM for Power Mac G5 (2005) on ebay since I upgraded to more RAM. Someone asked me if this would work on their Power Mac G5 from 2003. I wasn't sure. Any advice? Thanks!

    I would go to http://www.crucial.com/ and select the the specs for by model and processor speed to see if they match up with your ram. I am a PC Tech and I use this site frequently for max ammount ram, number of memory banks and so on. The ram Crucial sold me for my Dual Core G5 works rock solid so I trust thier research.
    DC G5 Power Mac 2 GHZ   Mac OS X (10.4.4)  

  • Where can i buy ram for macbook pro

    Where can I buy RAM for MacBook Pro  15 inch?
    I brought December 2012
    Do I need to upgrage for Srorage?

    See Apple Mac Memory Upgrades at OWC or Crucial
    Both are reliable and offer memory known to work with Macs

  • What Exactly are the Benefits of More GPU RAM for PP, AE, PS ?

    What benefit is there to having, say 4gb GPU RAM over 2gb ?
    I have read numerous conflicting, and perhaps misguided, claims regarding when/why one would rather have a graphics card with more than 2gb RAM.
    Does this impact effects render, multiple monitor resolution, CUDA, Mercury Playback Engine performance, other areas, etc. and how?
    Thanks for your response.
    A Ajar

    2GB of video ram is more than enough for the Hardware MPE engine and 1080 media with effects. Essentially the greater the ram space on the video card the greater ram caching available for the Cuda acceleration to buffer data ready for GPU processing. The Application memory management ie caching profiles though effect this based on each codec and resolution ie data per frame. However along with this you have to have enough system ram to create the buffers used to cache the data down to the GPU ram since that data shadows down for GPU processing and then back again for final encoding. This means that not configuring enough system ram will limit the amount of GPU ram used. Hence why you want atleast 16GB of ram for HD and the hardware MPE engine. 3GB+ ram spaces on video cards are for 2K to 4K + frame sizes ie R3D and Raw/CinemaDng. This is because the data per frame multiplies significantly when at 4K resolution. This require far greater ram space which is why you look for the 3GB+ ram space cards for those workflows. The Effect data will also increase because there is far mroe resolution data to alter. This is on top of the drawing out data which is what you see on the screen. That is when the differences for the cards show.
    Eric
    ADK

  • Can I use this ram for my MacBook?

    I want this ram,
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231154
    but I was wondering if my computer can support it.
    Here are my current Specs:
    Hardware Overview:
    Model Name: MacBook
    Model Identifier: MacBook4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.1 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 1 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MB41.00C1.B00
    SMC Version (system): 1.31f0
    Serial Number (system): W8839*5HS
    Hardware UUID: 8C8AC0B2-FA96-5B70-A207-53D62FFC2AD2
    Sudden Motion Sensor:
    State: Enabled

    From your manual:
    *Your computer has two memory slots that you access by removing the computer’s*
    *battery. Your MacBook comes with a minimum of 1 gigabyte (GB) of 667 MHz Double*
    *Data Rate (DDR2) Synchronous Dynamic Random-Access Memory (SDRAM) installed.*
    *Both memory slots can accept an SDRAM module that meets the following*
    specifications:
    *- Double Data Rate Small Outline Dual Inline Memory Module (DDR2 SO-DIMM) format*
    *- 1.25 inch or smaller*
    *- 512 MB, 1 GB, or 2 GB*
    *- 200-pin*
    *- PC2-5300 DDR2 667 MHz Type RAM*
    *For best performance, fill both memory slots and install an identical memory module in*
    *each slot.*
    Whether or not the memory that you provided a link for will work is between you and the supplier. I usually deal with macsales.com where they test the memory for Mac models and guarantee them to work.

  • Max ram for 2.4ghz 2008 model intel imac 24"?

      Hi.
    Im trying to get the max ammount of ram in my imac 24" 2008 model aluminum body i believe. it has 2.4ghz intel core 2 duo. and its running mac os x 10.5.8
    I want to get the highest ammount of ram my machine can handle. I know apple says 4gb is max, but im wondering if anyone has put in 8gb and it works?
    also could you tell me what the ram is called exactly so I can type it in to amazon and find the correct kind. Please help me on this issue! I want the MAXIMUM ram for my imac!!! Thanks all!
    Also, would it be worth upgraded to snow leopard? Im new to macs and dont know if that would make a difference? Give me your opinions on this and I'll do as you say for you are more knowledgable then I at macs! thanks again.
    And what all can I download for my machine in terms of operating systems to make it the most current my machine can run at? can I install lion after leopard on my machine?

    The maximum you can put in is 6GB, that is all that machine can address. WWW.MacSales.com (OWC) makes a 6GB kit and I'd recommend purchasing from them. Your machine could be a late 2007 or mid (began shipping in April) 2008. You will need to check the specifications which you can find in your owners manual or click Support in the upper right of this page then click Tech Specs. OWC is the only vendor I know that makes a 6GB kit however if you have the correct specs you can make your own, a 1x2GB DIMM and a 1X4GB DIMM. You don't mention where on the planet you're located, OWC is a US company but will ship overseas.

  • Cheaper RAM for iMac G5

    I was searching and searching for cheap RAM for my iMac. It seems most places sale RAM for Macintosh computers but charge up the butt for it. Mac comps, or atleast the iMac G5, use what should be cheaper CAS3 memory. While searching I found most places were selling 1GB sticks of "Mac" RAM for $130 or more. I found the memory configurator on Patriot Memory's website and found this model stick of 1GB RAM to be compatible with the iMac G5 2Ghz, PSD1G400. I got two pieces shipped for $212 (not from Patriot but a reseller). I found most other websites' memory configurator will have a 1GB stick of "Mac" RAM and then another stick of 1GB CAS3 RAM for alot cheaper but wouldn't confirm the 1GB CAS3 RAM as compatible for Mac. These websites also would not list the specs of the "Mac" RAM. Who knows. The "Mac" RAM might be the same as the other RAM but they just want to sell it for more. I haven't recieved my 2 sticks of RAM yet but I'll keep everyone posted on how it turns out.

    Mac-specific RAM was available in recent months for the same price that you have quoted. Apparently RAM prices, both generic and Mac-specific, have risen since then. Prices will fall at some point in the future. I have tried generic RAM in my iMac G5 and had no problem with it. I got a nice sized rebate when I bought it. Some others have claimed to have had problems with generic RAM, however.

  • Where do I find ram for my imac 21.5 2009

    where do I find ram for my imac 21.5 2009
    Thanks,ed

    Crucial.com and macsales.com (Also known as OWC) are highly recommended sources for Mac ram. Its easy to find the correct RAM through either of them, and both guarantee 100% compatibility with your Mac.
    http://eshop.macsales.com/shop/apple/memory/iMac
    Other RAM brands may or may not work correctly with a Mac.

Maybe you are looking for