RAM install: what bank/DIMM order + size order?

Hi all,
My iMac 10,1 (late 2009) factory RAM (2+2) came installed in slots Bank 0 DIMM 1 and Bank 1 DIMM 1 (which slots System Profiler show as being consecutive at the bottom of the memory description panel). Now I'm adding 4+4, should I follow the same pattern, using Bank 0 DIMM 0 and Bank 1 DIMM 0? I ask because it somehow seems more logical to me that you'd populate any given bank with the same size RAM.
ALSO
Does it matter in what order the 2GB modules are vs the 4GB modules, is there a "larger/smaller comes first" hierarchy in populating the slots?
thanks in advance,
- Dan

Follow the side by side matching and it's fine to use the open slots for the new RAM. You don't have to put the larger ones in the upper slot (depending on what you call upper!).

Similar Messages

  • Ok i finally decided what i will order with my new mobo. Pls tell me what you think...

    Ok i got the 875p neo Fisr pcb 2.9
    I have a p4 2.8(800) atm , but im thinking of ordering a 3.0 or 3.2 since i dont overclock much...
    Decided to go with kingmax ramm unless someone saiys else i got a reply earlier that someone has this and it works. only thing i worry is they dont come in a duel kit so im gonna order 2 from prolly a bulk load... pc3200 kingmax . newegg has them for 80 a pop. 512 meg a stick. one thing that worries me is they are rated at 2.5 volts and if needed to crank them suckers to 2.7 then i might change the memory order if you guys think that will be a problem.
    Got a bfg geforce 600gt coming from best buy for 399.(434 w/tax.)
    Gonna get a vantec 520 watt psu, has oveer 25 amps anthe 12, has over everythng LOL.
    I dont know what bios this new mobo is so i am wondering if after i install all if i should flash to the latest bios or not to worry about flasshing??
    Woot im finally getting close to ordering , only thing i might change is no pcu if you think a 32. from a 2.8 wont make a bigg difference , or if you think the kingmax ramm rated at 2.5 volts might give me a problem . Im afraid to go corsair or very low clas like 2. these are 2.5 . Im my last board the pcb 1.0 after i bios flashed from somethng ( i dont remember which i had i could no longer run in ultra turbo)Ohh ye i had 1.92 b at that time. but for some reason it worked . My only concern is that i wont be able to run in ultr turbo, i could still run in slow on my last mobo but i lost scores in all benchmarks. Well well see what happs this time.
    Ill let ya know . thanx for all of you that replied.

    the neo lsr or fisr should be great boards . mine kicked butt until i messed with it and i guess the flashing which i did correctly on my board didnt undo when i went back. So all with a pcb 1.0 if it works, dont mess with it. LOL . Worked great and was very fast .
    I hope the new pcb 2.0 is just as good.
    ohh that was geforce6800 gt not 600 LOL. Sorry im tired been up and stressed over what i should order...
    Im out .
    Peace !

  • What happens sales order linked with wip job is cancelled

    HI,
    what happens sales order linked with wip job is cancelled ?
    actually if wip job is cancelled then sales order lines is on hold ?
    i wanted to know what if sales order of that wip job item line is cancelled say example  if that wip job already is in processing .
    please help me
    Thanks in Advance.

    If WIP job cancelled or Requisition/PO is cancelled, corresponding order line reservation will be cleared and will go to 'Supply Eligible' Status. Progressing this line will again follow the WIP/Requisition path based on item.

  • Automatic Payment run without Bank Ranking order

    Dear Experts,
    I want to excute the Automatic Payment run without assigning the Bank ranking order in OBVCU, means that when I run the APP it should pay from the House Bank entered in the Vendor master data under the Automatic payment transactions. In my case House Bank is the Bank Account.
    Details of the data in Vendor master are;
    Payment methods: C
    House Bank:   Given
    Details of BVCU are;
    Ranking Order: Not entered
    Bank Accounts: Entered
    Available Amounts: Entered
    When I execute the APP, it puts the payment in exception list in the proposal.
    Any help will be much appreciated, thanks.

    Hi
    As per my understaning there will be no impact . Vendor Master data always have priority.
    so maintain ranking order and vendor master also woth aprropriate House Bank and Account ID
    Thanks
    Manoj J

  • FI - Several bank ranking order definition

    Hello,
    In bank customizing (FBZP-Bank determination), I need to define three banks for the same payment method and currency.
             Example :
         Pmt method     Currency     Rank. order     House bank
         T     EUR     1     BNP01
         T     EUR     1     SGE01
         T     EUR     1     FOR01
    In standard, the key is the concatenation Pmt method & Currency & Ranking order. SAP also controls entries in this table and you can not define several banks for only one payment method and one currency.
    Is there a mean - an OSS note, ... - to uncheck this control or to define this ranking order ?
    Thanks in advance for your feedback.

    Hi,
    SAPNET note 81153 describes how to set bank ranking order as "ongoing transaction".
    This means, a change in the ranking order can be done in the P-client and there is no need to transport each change to all systems.
    So you can easily change the ranking order for the same payment method/currency BEFORE each payment run if needed.
    best regards, Christian

  • How do i find what device is ordering songs

    how do i find what device is ordering songs

    In addition to the link Paulcb sent to you, you can find the model of your iPad on the back of the iPad at the bottom in the small print and it will start with an A.
    If it doesn't have any camera on the front then it will be and iPad 1.
    Regards,
    Steve

  • What is the order of restoring backups in sharepoint 2010

    Hi
    production form has 
    2 web application ,custom solutions and service applications configured(user profile,serarch)
    here what is the order of restoring backups in  my newly created test form
    adil

    Hi
    in my production environment when i create new web application how
    the custom solution included in _layouts folder?
    this  is the information from systemsettings>farmsolutions
    Name: xyz.scan.wsp
    Type: Core Solution
    Contains Web Application Resource: Yes
    Contains Global Assembly: Yes
    Contains Code Access Security Policy: No
    Deployment Server Type: Front-end Web server
    Deployment Status: Deployed
    Deployed To: http://spwf01:81/;
    http://spwf01:83/; http://spwf01/;
    http://spwf01:84/; http://spwf01:82/
    here  there is no webapplication with port 85 , but when i create new web application with port 85
    this solution exists in _layouts folder
    adil

  • What is the order of execution of global transfer routine where multiple routines are involved?

    Hi,
    Suppose we have start routine, transformation routines and end routine defined between datasource and data target, and also we have a global transfer routine created on an infoobject.
    What is the order of execution of routines in this scenerio?
    Also if conversion routine like ALPHA is defined for an Infoobject, when does this come into flow.?
    Please enlighten me.
    Thanks,
    Akshara

    Hello Akshara ,
    The sequence of routines are as
    1. Start Routine
    2. Master Data Look Up or
    3. Field Level Routine
    4. End Rountine
    Apart from this , there is Expert routine, which is used in special cases, when there are not the sufficient functions to perform a transformation. It can be used as a interim solution , and it performs all the  functions of Start routine, end routine , field routine.
    Note : if you have created  transformation, and then created Expert routine, then system will delete all the existing transformations.
    Further to this, you can explore more, by debug the transformation as suggested by Vijay Kumar.
    Hope this helps !
    Regards
    YN

  • HT4910 documents edited on iphone, ipad, & mac   what is the order of creation and editing and must each change be manually initiated to update the icloud

    documents edited on iphone, ipad, & mac   what is the order of creation and editing and must each change be manually initiated to update the icloud?

    No idea what you mean by the firsy part of your question.
    Documents edited on the Mac need manually uloading to iCloud at iCloud.com,documents edited on the mobile devices are updated automatically.

  • What is the order of deletions when a DVR is full

    1302 wrote:
    My DVR is nearly full and I have a number of items marked for recording in the next two weeks one of which will surely bring DVR to 100% full. What is the order in which the DVR will begin deleting previously recorded programs to make room for latest recordings?  Normally, the oldest recordings will be deleted.... with the X1 system DVR, you can select to KEEP for 1 year or select "Space is needed" within the DVR manager.. -=Ray=-

    1302 wrote:
    My DVR is nearly full and I have a number of items marked for recording in the next two weeks one of which will surely bring DVR to 100% full.
    What is the order in which the DVR will begin deleting previously recorded programs to make room for latest recordings?
    Sounds like an external hard drive might be something to investigate for your DVR.  
    Some details at the links below:
    http://customer.xfinity.com/help-and-support/cable-tv/external-dvr-storage/
    http://store.comcast.com/my-book-av-dvr-expander/detail.php?p=442589&v=comcast_accessories
     

  • What is the order of OS updates needed-?

    What is the order of OS updates needed to get to the most current OS? I currently am running 10.7.5 Also, I've tried looking for the OS updates, but only seem to find updates and not the whole OS i.e.: 10.8 and 10.9  Thanks!

    The following has instructions: https://www.apple.com/osx/how-to-upgrade/

  • What is the order of starting the services?

    Hi,
    I have 2 node RAC with ASM. what is the order of starting the services like crs, asm,nodeapps, db, ,listener?
    can you help me?
    Thanks

    The basic steps are asm, crs, db, listener, nodeappsTypo there? First CRS then ASM.
    Also, if you are running ocfs2, then the very 1st step would be ocfs2 (if your voting and OCR disks are on a ocfs2 volume, it needs to mount before CRS can start).

  • What is change order request ?

    hi
    what is change order request ,is it change management in that case what is change management .
    can we change sales order  information also ...
    thanks in advances ...

    Check versioning functionality.

  • What is Framework order and blanket PO

    dear gurus,
    kindly focus on what is Framework order and blanket PO ?
    regards,
    snb

    Hi SNB,
    Framework order (FO) is a document type which is provided by the standerd SAP.
    It can be used for the consumable material ( Which is having low value & where making GR is not of worth like C category item.) & called as blanket PO. Here we need to mntion the validity period  & target value or quantity as a restriction as well as need to mention item category as a "b".
    Also it can be used for the procurement of extarnal services (Item category "D" ). Here we need to do the entry of services which have been performed & need to accept the same whereas in blanket PO, GR is not required.
    At the end i would tel u that Framework order is the document type which can be used as blanket Po  & procurement of services.
    Reward if useful.
    Regard,
    Subhash

  • What does sales order type:zsds,zsdr,zscr ,zscd mean?

    What does sales order type : zsds,zsdr,zscr ,zscd mean?
    Please provide the fullform and a short description.

    Hi,
    it seems to be own defined order type because they starts with Z.
    Look via F1 what order types are or use SAP-Help
    http://help.sap.com
    Regards, Dieter

Maybe you are looking for

  • Photoshop CS3 Extended freezes on startup - Windows 7

    Hello, Recently Photoshop CS3 Extended freezes when I launch it on my Windows 7 (64 bit) computer. The splash screen appears but then it just stops working (usually on initializing Tools). It then asks to exit or search for help. I have read several

  • Problem with reading special characters in unix

    Hi, Iam trying to read the data from a file by the following code FileInputStream inputFile = new FileInputStream(xx); InputStreamReader reader = new InputStreamReader(inputFile); BufferedReader bufferedReader = new BufferedReader(reader); String s=

  • Revaluation of Asset for past year

    Hi, My client had asset revaluation( reduction in asset value)  in Dec. 2009. Because of lack of resource at that time, they carried out this revaluation in strange way. They didn't reduce the asset value in APC account of asset  but to report the ef

  • Field population In MIGO on F4

    Hello Guru's, I am struck at one point In the MIGO transaction I added a Field (GR Number). Also In the PO Srch Help I Included a Srch Help For my requirement . Following Search Help is in MIGO for searching PO. a. GR Number b. Challan Number c. Truc

  • ITunes error when playing HD video to monitor

    I've got a few-months-old Mac mini hooked up to an older Apple Cinema display (model A1081).  When I try to play a TV show purchased from iTunes that's in HD or HD-SD format, I get the following error (and no video): This movie can be played only on