Ram issues-reading only one side

My Lombard tells me i have 192mb of ram so i always figured 128 in the top, and the original 64 in the bottom. I went to check out some ram upgrades today at the shop to get upto 512mb. When we opened it up to test the new ram, we learned that i do have 128mb in the top, but there is already a 256mb in the bottom. So for some reason my comp is only reading half of each card. We even tried the new ram card and it also only read half of it. We tried different combonations and it didn't change. Its only reading half of each ram card.
Anyone have any ideas why or what i can do about it? Thanks for any suggestions.
Blake

Hello, So i have taken it apart and played with it a bit more.
First of all, each ram card has 4 black boxes (modules) per side. So maybe thats a bad sign right off.
The one card still has a sticker on it from where it was purchased, it reads PC133 , Ibook 256 Wilkins Technology. The modules are Samsung but i think the board is not.
The other card looks physically about the same, i am assuming that its a 128 because both slots consistantly read 1/2 of which ever card is inserted, in this case reading 64. The modules on it are Samsung and the board also appears to be Samsung. Its sticker reads Samsung Korea 9926. If this card is in the computer alone in either the top or bottom slot, the computer will not boot up. It just gives me an icon with the finder logo flashing to a ? on it.
The 256 card will allow the comp to boot up no problem when its the only card installed, and the computer will show 128mb if this 256 card is in ether slot. And if i add the other card (that cannot work alone) than it adds another 64mb to the total giving me 192mb total. And this is consistant with the cards in either slot.
In summary, the 128 card will not work alone, in either slot. But if the other card is installed, the 128 card will provide me with 64mb more ram, installed in either slot.
Pretty weird...
Could this have anything to do with needing to upgrade firmware? Probably a stupid question but just a thought...

Similar Messages

Hi...! Only one side of audio working...?

Hi! On my Ipod mini, only one side working (did a search in here , but found nothing that could help) is there anything I could do?
Thanks!

I had this same problem last year. But recently the entire sound blew out. I've tried other people's earbuds and spare headphones I have, but nothing works...It must be an iPod issue. I've been looking all over for a solution, nothing works.:(

In my iPad mini if I use earphones I can hear from only one side

In my iPad mini if I use earphones I can hear from only one side but the earphones work fine with other devices

Have you tried different headphones in your iPad mini?
Check in Settings > General > Accessibility if little slider half way down isn't moved to either side towards "L" or "R".
If it isn't , try to reboot the device, but it's likely that your audio port isn't working correctly. If so, it should definitely be covered by warranty.

How can I add a stroke to only one side of text?

How can I add a stroke to only one side of text characters?

I'm probably misunderstanding what you want, so I'll just ask. Is this it?

Canon MR-14EX II only one side fires

Hello guys! I'm sure there is a simple solution to my problem but I can't figure it out myself. I've purchased Canon MR-14EX II Macro ring flash and when I try to take pictures, only one side of the flash fires. What am I doing wrong? Thank you!
Solved!
Go to Solution.

I have Ver 1 and had an even older model so I suspect setting are similar. Check your manual for the section on "Setting the Flash Ratio". You can turn off either side should you want to, which may explain your problem. .
"A skill is developed through constant practice with a passion to improve, not bought."

I have an Ipod, and when I plug in my head set only one side play's; unless I play with it. Please Help

Help please I have a Ipod touch, and when I plug in the head set only one side is playing

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

TS1630 My speak the voice came out only one side another side mute

I just bought iphone 5 2days ago and i found something wierd with my speaker, when i plsy music or youtube or whatever but the sound come out only one side of speaker. Left speaker can't hear anything, is it normal?? Or it broken?

There is only one speaker. The left side, next to the headset jack, is a microphone.
Matt

Please help! t61p: bluetooth stereo headset sound coming from only one side?!!

Just bought a X5i stereo bluetooth headset (A2DP protocol) from BlueAnt and paired it with T61P. The laptop recognized it and it connected to it. When i started playing audio though, the sound is coming only from one side of the headset. Do I need to update the bluetooth drivers for lenovo?? What do i need to do? Please help!

Hi Ledbroke,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv2700 Notebook and having sound issues when headphones attached. Here is a document on troubleshooting audio problems with external speakers, headphones, and HDMI sound devices. Under the two quick test section it shows you how to troubleshoot headphones.
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Enabling BFD in only one side

Hi Everybody
The theory tells that if BFD stops to receive keepalives, it informs to the routing protocols that the neihgbor is down. If I configure BFD only in one side and associate BFD with the routing protocol, the neighborship goes down?
Thanks

Hi,
You need BFD on both side but you could use echo mode on one side only.
I tested it with 12.2(33)SRC2, and configuring BFD on one side only doesn't bring down the IGP adj. The BFD session stays in AdminDown state.
HTH
Laurent.

The printer box shows "auto rotate" , but it prints only one side.

HP laserjet model

"Auto Rotate" generally refers to automatically selecting portriat or landscape printing. For two sided printing you want to print Duplex. Some printers have automatic duplexers and can print both sides of the page automatically, others support only manual duplex where one side is printed, then the pages are reloaded in the printer and the back side printed.
Please read this post then provide some details. What printer model? What operating system?
The Vista/Windows 7 Duplex Printing Troubleshooting Guide here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Connectivity issue from only one computer

Let me start by saying i have 10 servers and about 15 workstations on this network. only one computer (my main computer) has this issue. all other computers work as they should.
This problem started to happen recently and randomly affecting RDP connections to 2 of 10 servers and now affects 5 of 10 servers. I am not sure i did anything to make the problem worse. Additionally I at first suspected it a DNS issue as connecting to the
ip address of effected computer as opposed to host name allows connection but as I said the issue is only on one computer. Looking at the logs below i am stumped.
ELECTRO4UBLADE
20499
Warning
Microsoft-Windows-TerminalServices-RemoteConnectionManager
Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin
3/18/2014 9:39:45 AM
Remote Desktop Services has taken too long to load the user configuration from server \\ADDS1.PDX.DAVISDARVISH.COM for user davis
RDPClient_SSL: An error was encountered when transitioning from TsSslStateDisconnected to TsSslStateDisconnected in response to 25 (error code 0x8000FFFF).

I'm experiencing the same issue, intermittently, when remotely using two of our eight SBS 2003 network computers via Remote Web Workplace. The two SBS computers are Windows 8.1 Pro 64 bit machines.
Intermittently, the RWW connection is lost and I'm returned to the RWW page with the message "VBScript Remote Desktop Disconnected...an internal error has occurred.
When the issue occurs, the Event logs on both SBS computers contain the Event ID 20499, Remote Desktop Services has
taken too long to load the user configuration from server XXXXX. The event is logged at the time the RWW connection is lost.
As the issue occurs with RDP sessions to Windows Server 2012 R2 (based on reports from others) and, in my case, SBS 2003,
perhaps the common element is Windows 8.1.

HT201401 Lighting cable only one side can be charged?

Why my lighting cable can be use for data transfer in both side
But only can be charged the power in one side only?
It is my problem or?
Design by apple?

I tried that first. It didn't get the gunk that was in the bottom of the port. The toothpick popped it right out in one piece. Took almost no pressure at all. I was worried that I would hurt something with the toothpick so I gently inserted it at one side and then slide it to the other side of the connector sorting of feeling it out. It came out with a big block of gunk from the bottom of the connector. I was just probing the connector to see if the toothpick would fit. I really hadn't made any effort to clean anything yet. I I was amazed at how much gunk there was. I keep my phone really clean but I guess my pockets are another story...

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode: pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion: 5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
 <ADSite Name="Default-First-Site-Name"/>
 <Forest Name="staging.local"/>
 <Domain Name="staging.local"/>
 <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
 </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

HT4528 Only one side of my ear buds works with music. what can I do???

what do I do???

Also check Settings>General>Accessibility, under Hearing be sure the audio slider is centered and not offset to one side.

Issue with only one distribution point not able to access only one folder wile PIXE boot

I am facing problem only one distribution point not able to reach perticular folder through network access account, all other DP and other folder are working fine, I already verifiy share and security permission are in place, through <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS001.xyz.ORG\SMSPKGE$\VEL000EA\</a> 
i am able to reach from network, but while booting from system belongs to perticular DP, it stuck on below folder where fdisk.cmd files are uploded from primery server. pls check below logs and suggest what could be the actual issue.
<spanlang="ENIN">Severity               Type     
Site code             Date / Time        System Component       
Message ID        DescriptionError      Milestone          
CES         1/31/2014 12:32:11 PM  MININT-L670NBC             Task
Sequence Engine   11135    The task sequence execution engine failed executing the action (DiskPart DataDisk) in the group (Install Operating System) with the error code 2147942402  Action output: T=80070047
(e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,148) Failed to access the share <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\</a> with network access account !sAccessibleSource.empty(),
HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2392) GetAccessibleLocation(pszSource, saResolvedPath, sSourceDirectory, dwFlags, hUserToken), HRESULT=80070002 (e:... [Show more]

The error 80070047 states a msg as "No more connections can be made to this remote computer at this time because there are already as many connection as the computer can accept." Check the share quota if at all any limitations has been provided, if not,
try giving one.. Also, check if any enterprise policy has been applied for the share connections limitations..
bluerail

Ram issues-reading only one side

Similar Messages

Maybe you are looking for