Ram not showing up after resetting nvram
I have a 3rd party battery that was not working properly. The company told me to reset my nvram. Since doing that, one of my memory chips is not showing up. It says "slot empty" and there is no memory there.
I read another post on here that said after updating to 10.4.9, there 3rd party memory disappeared as well. I updated around the same time that I reset the nvram.
I also tried resetting the pram.
I have a 15" aluminum powerbook G4 with os 10.4.9
Thanks for the advice.
Welcome to the Apple discussions.
Sorry to hear your memory disappeared. There's no such thing as third party memory - Apple does not manufacture it's own memory, rather it uses memory from company's like Samsung and others.
If it's the lower slot, it could be coincidental, however, there have been issues with the lower slot failing, and Apple has an extended warranty repair program to address it in a narrow range of Powerbooks. Info at http://docs.info.apple.com/article.html?artnum=303173
Similar Messages
-
I need help as I am new to IOS.
Currently it is not showing anything after I plugged in the hdd to my mac book.I had the same exact issue, which you can see in another forum.
I "killed" both my MBP and my wife's MBP by plugging in my iPhone and getting a message about USB drawing too much power.
It was not fixed by using an SMC reset.
I DID fix it by unplugging the battery, I left it unplugged long enough to remove the RAM, HD and put some RAM and HD back into place. (I initially swapped the RAM and HD from my MBP into my wife's MBP.
After that everything was good, although upon first boot, some apps crashed because of the "system date" being set to a date before 2000. I forget the exact date, but it will be some time in 1984, the birthdate of the Macintosh. It is not a big issue, just correct the date and time.
If you are curious about that date, copy a large file on your drive and look at the CREATED/MODIFIED date....it will show this same date, until the copy is complete, at which time you will see the correct one.
Once again, try to disconnect your battery, very carefully by lifting up the connecter evenly on both sides to avoid damaging the connector or the board. -
HT4623 itune is not showing iphone after updateing to IOS6
itune is not showing iphone after updateing to IOS6
Have you tried the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me
After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
OHS 11gR1 web-page not showing up after creation, registration of webgate
Hello there,
The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
Thanks!!Hi,
You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
mark, if this helps.
Regards,
Kishore -
The templates are not showing up after I select them???
the templates on pages are not showing up after I select them....unless I highlight the entire page and select a particular colour. That leaves all the colours in the photo off. Any help would be so very helpful.
CeraG - It will help to answer if you supply your system version, pages version and if you lately have done anything to the computer (installing, uninstalling etc)
I think you have forgotten to do a Software update or it could also be a font problem but more info from you is needed! -
Why are contacts not showing up after added
why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email
I am replying to my post with the hopes that someone can please help me!
I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
Your help is much appreciated.
Message was edited by: oneness_podcaster -
Ipod touch screen not working even after resetting to factory specs
ipod touch screen not working even after resetting to factory spec. lock symbol appears at top
That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
-
Contact addresses not showing up after upgrading to ios 7
Contact addresses not showing up after upgrading to ios 7
Contact addresses not showing up after upgrading to ios 7
-
Lacie Rugged external drive will not show up after Yosemite update.
Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.
I have the exact same issue. Have you had any luck with a solution?
-
I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?
It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you. -
My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?
Hi Dawg70,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy -
LR5 - Watermark does not show up after exporting...??
Does not show up after exporting...?? Any ideas???
ccherrry wrote:
Any ideas???
Yeah, provide some details.
Version 5.0 or 5.2RC?
Mac? PC?
Simple Watermark?
Watermark Editor Created? Text-based? Graphic-Based
Export format? -
After upgrading iPad to iOS8, iPad cannot sign in to iCloud. Password is not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?
This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699 -
I have an early 2005 Dual 2.7 GHz PowerMac G5. It came with 2 GB of RAM (4 x 512mb). I wanted to upgrade, so I bought two more gigs from Crucial (2 x 1gb). When I install the RAM, however, the computer only recognizes the new 1 gig sticks (no matter what slot they're in. Moving outward, I've tried [512, 512, 1 gig]; [1 gig, 512, 512]; and 512, 1 gig, 512]. Everytime I boot up (even after resetting the PRAM) and open System profiler, it says the slots with the 512 sticks are empty. Any ideas?
When adding RAM on G5s, always put higher density first.
And always clear or reset nvram, either try zapping PRAM/NVRAM after you have it like you want, or boot into Open Firmware via command + option + o + f
reset-nvram
set-defaults
reset-all
(you will need to reset the startup disk)
I prefer OF rather than the old "zap" routine of multiple boots and less effective.
Maybe you are looking for
-
Why is it not possible to attach more then one photo on email
i tried to send several photos with the email app but there is no way... did I miss something? it works with gmail app but not with the Ipad. regards
-
Tiling options unavailble for Adobe PDF driver in Acrobat X
I am having an issue printing tiled pages using the Adobe PDF driver from Acrobat X. Every other driver I have installed has the options to Tile Large Pages and Tile All Pages from Acrobat documents. As soon as I switch to the Adobe PDF driver, the o
-
First boot of local zone - how to determine when sysidtool has finished
Hello, we use a /etc/sysidcfg in order to do the solaris base configuration automatically. After the first boot of a local zone I recognized that some tools are started by solaris (sysidtool, etc.) which apply the settings mentioned in /etc/sysconfig
-
How to split data using delimiters
HI, is there a way or a function that will split/separate data based on the delimiters? example: if i have a variable x = 5.4 , I want to separate them using the period(.) . So that i can separate 5 from 4. Thanks.
-
How Can A Website Be Opened In Chrome Using Adobe PDF Script?
How Can A Website Be Opened In Chrome Using Adobe PDF Script? An Internet Explorer website can be opened using: app.launchURL("Website-Name", true);