RAM Preview framerate and sound issues

The same story as usual. A beginner who can't get the framerate right or the sound to play in the RAM Preview. Well then:
Ae CS6.11.0.0378, I think
Demo version
7,9 g ram allocatable
Win7 proffesional
Only .avi and .mp4, can't tell much more than that
All other common factors can think of vary between the layers, with no difference.
Sound preview set to 10 minutes
No mute-related settings activated
Sound and volume checked for each individual layer
I don't know what more to submit, there's probably a lot.
It's quite simple. No sound in the RAM preview, and it keeps freezing, not responding when I start it, and playing at random speeds. The sound does play in sound preview. The framerate is set to auto.
That's about all I can think of. It probably needs a lot more detail required, but not anything I can think of. Any help appreciated.

You can get the frame rate right by dragging a clip in question onto the Make Comp icon at the bottom of the project window.
If you're fooling around with time -- time stretch, time remapping, posterize time, time displacement -- or using Rotobrush or Warp Stabilizer -- you should know that AE doesn't like mp4's as the source video. No telling about the avi.
There could also be compressed audio in the video files, and AE has never played nice with compressed audio.

Similar Messages

CS6 RAM preview short and "needs 2 or more frames" errors

Hello everyone,
I've been researching this one for over a week now and still haven't found a solution. The short story it is that my RAM preview is limited to only a few seconds regardless of work area, but I've got over 4Gb of RAM available and open for use. CPU is barely being used as well. I'm also intermittently getting the "After Effects Error: RAM Preview requires 2 or more frames to playback," which confuses me as I have 4Gb or ram available. RAM is still close to 4Gb during and after preview. This has been a repeated problem, not matter how many times the memory is purged, the RAM is free'd up with the Memory Clear App (as recommended in previous threads), or the computer is restarted. Memory and Cache have been optimized for best performance as well. Also, final renders are fine and have no problems. It's only with RAM preview and previewing the project that I'm having trouble. It seems to me that the project is being bottlenecked somewhere but not sure where or how. To open, here's the system I'm running it on. It may not be a brute but it should be enough to handle the work.
System:
Program: Adobe After Effects CS6 (11.0.4.2
System: Mid 2010 iMAC, 27-inch
Processor: 2.8 GHz Intel Core i5
RAM:   8GB 1333 MHz DDR3 (two 4gb cards)
Graphics: ATI Radion HD 5750 1024 MB
Software: OS X 10.9.4
Hard Drive: Western Digital WD Green 2TB Sata drive
                    -6.0 Gb/s 3.5" Hard Drive
Project Specifics: (Has happened across other similar projects)
Project: Educational video with graphics, simple animations, and link to Premiere Pro timeline.
               -33 layers (most are highlight boxes and animated arrows)
                         -13 small PNG images (Arrows and simple graphics with 1 3D layer)
                         -7 Short Compositions
                         -7 Text Layers
                         -5 shape layers
                         -1 Premiere Pro Timeline
Composition Settings: 1280 x 720 at 23.976fps
Project Location: Company Server
Problems
-Ram preview only renders a few seconds, regardless of Work Area or "From Current Time" enabled.
-Fairly frequent, "After Effects Error: RAM preview requires two or more frames to playback."
-Scrolling through project is very pixelated.
When Problems Occurs: When trying to perform a RAM preview.
Attempted Solutions:
- Use of Memory Clean App to open up more RAM. (Makes little to no difference when problem is at peak.)
- Shut down and restart computer (Does work for a short time but problem reappears within an hour)
- Closing all apps and running just After Effects. (Little to no difference)
- Turning off motion blur, turning on 3D draft and using Proxies to simplify project. (Little to no difference)
- Purge: All Memory. (No difference)
- Stopping any unnecessary processes in Activity Monitor. (No difference)
Additional Information:
-Projects seem to take a little longer than normal to open. (1-2 min max.)
Thanks in advance for any support on this issue. It's been quite a stressful timesink.

Unfortunately the problem has come back again after an hour of use this morning. To show how much RAM I have available at the time the issue appears, I've included the Memory Clean window showing 4.44GB of ram available at the time of incident. It first happened a few minutes ago with roughly 1GB available, so I and purged all memory in After Effects and cleaned the RAM with the Memory Clear app, but still no such luck. I've been working with the same actions and material all morning so nothing new was introduced to the project when the error occurred. The work I was performing at the time was animating highlight boxes over a screen capture, but again it seems to happen regardless of what I'm working on. I'm going to restart the computer and see how long it makes it before needing another reset. Any other ideas as to what it could be? Also, if there's any more information that might be helpful to solving the issue please let me know and I'll be happy to share. Thank you again for the support!
Szalam, thank you for the link. I had been to the page previously but am going back to watch them again to see if I missed something. If it is a bottleneck, I'm not sure where it could be as of yet.
And just to make sure I'm not making any other simple mistakes VVV

AE CC - Ram Preview Flips and Offsets. HELP.

Having this problem on our MacPro late 2013 (The Trashcan).
It's the maxed out version with two AMD FirePro D700 3gb
OSX 10.9.2
AE CC 12.2.1.5
We're running SwitchResX to scale down screen resolution on our Dell 4K monitors
I have rebooted but nothing seems to help.

Hello - i am having the same problem in both AE CC and AE CC2014...***BOTH VERSIONS OF AE are fully updated
It was working fine last week, although ive had this problem once or twice before - but it has never lasted this long. In the past, i seem to remember just restarting my computer.
I too had installed SwitchRes X recently, so i thought that might be the problem - but ive uninstalled the software, and removed the prefpane in my system settings.
Also, Ive just installed the CUDA 6.5.46 update - yet in CC2014, it is not showing up in the Pref/Previews - it is showing up in AECC, but having the same RAM preview problems
DETAILS:
Mac Book Pro 15" Retina OSX 10.8.5 (got refurbished model in June 2013)
Processor 2.7 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
What im getting
Preference/Preview settings
Really confused, and ive scoured the forums...please help

Apple TV 2.3 and sound issues

The 2.3 update seems to have cured the hang and reboot issues that were introduced in 2.2, BUT now when my TV show audio playback contains sounds like "ssssss", car engines, or white noise, I'm getting a strange oscillation in the audio. It's pretty irritating.
Anyone else?

The 2.3 update seems to have cured the hang and reboot issues that were introduced in 2.2, BUT now when my TV show audio playback contains sounds like "ssssss", car engines, or white noise, I'm getting a strange oscillation in the audio. It's pretty irritating.
Anyone else?

Pixelated Graphics and Sound Issue (Gt70 2pc dominator gtx 870m)

Sup.
Bought my first MSI gaming notebook a couple days ago. It's fairly nice but it seems I'm having a couple issues.
First:
Sound issue. I have a Turtlebeach Z22 headset. When using it on my MSI laptop I get a series of pops every couple words. The Z22 uses both usb and aux for the mic/headphones and I have tried everything from swithcing jacks, usb ports, updating drivers and playing around with realtek settings. No dice.
Second: For some reason in game cutscenes have a lot of pixelation.
I have tried crysis 2 and farcry 3 so far on max settings. Any sort of cutscene that uses a video clip (like Farcry's video tutorials) has a lot of pixelation and is sometimes fuzzy. The games are usually fine for the most part. I have updated my gfx drivers played with gfx setting and set launching options to Nvidia as global.
Any ideas?

1. Quote from: sidtheviciousyt;112316
When using it on my MSI laptop I get a series of pops every couple words.
Do you mean the pop sound? It would be better if you can share a video or sound record of the situation.
2.
Quiet manay people talk about the issue, try to change the game setting to improve the situation.
Crysis 2
https://www.youtube.com/watch?v=5vGD-zSyE9I
Farcry 3
http://steamcommunity.com/app/220240/discussions/0/846940248862985794/

SD Card Issues and Sound Issues

Hello all,
I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
I am having 2 issues:
1st Issue:
SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
So I changed it to SD Card Storage and all is well (At least, that is what I thought).
After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
2nd Issue:
Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm.
What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
What am I missing here? Any thoughts?
With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
Solved!
Go to Solution.

Hello Rickard,
Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
I have to say, it does seem like that SD Card is defective
Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
If the problem goes away I would consider my 1st issue being solved
However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
Perhaps there's a setting I'm missing?
Your help would be greatly appreciated.

Yosemite graphics and sound issues

this is my computer:
MacBook Pro (15-inch, Early 2011)
Processor 2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
i have been dealing with a very inconsistent problem since i've downloaded yosemite.
I'll start with the one consistency.
my computer no longer chimes at start up. Thought it was a hardware problem. I have run an AHT to no avail. no problems detected. although it may be an issue with the lack of RAM seeing as 'the internet' recommends at least 8GB for Yosemite.
itunes takes approx. 10 minutes to open. (also may be a RAM problem to this is regardless of whether anything else is running)
as does iphoto
Now the inconsistent stuff:
the computer crashes when dealing with any time of image files may it be picture or video.
most of the time the computer will have some trouble playing video files and at times the whole computer will crash very spontaneously. I have updated the flashplayer as well as my media player of choice VLC. I do have stints when VLC will work just fine for several films but then will randomly crash.   When the computer crashes it will go into a start up loop of the gray apple screen to a blank gray screen which will then crash and restart again and again.
I can't, for some reason, never get the recovery mode to work. Command R takes an eternity and then goes to gray screen. Command D shows no problems.
I have reset the PRAM and SMC which at times works and at times doesn't in my quest to get past the gray blank screen.
after the computer has started up in my juggling act there is a graphics problem note.
youtube on safari is very glitchy. the glitchiness sort of began with Chrome so deleted it and started to use Safari sometimes no sound. sometimes the video lags. i have to move the scroll around a bit for it to work. once it gets the hang of it its fine though...
when the computer comes out of sleep it may take 30 seconds when i haven't used it for a while which i understand is a hardware sleep thing. i have heard stories of the black screen and functioning mouce and this happens here quite a bit. from 5 to 30 second of time. the main interesting point is that it at times starts up ok and at times will give me a very glitched out login screen, yet the login panel itself is fine.
i have been thinking about downgrading to maverick again or even lion for the sake of installing a new operating system and to deal with the RAM but i think there is a collection of minor problems and i don't really know what i'm doing completely. I will buy more RAM if this issues is salvageable. all in all i'm one those OMG my computer ***** now that i've downloaded yosemite people.
can someone please point me in a self suffiecent direction? are there any diagnostics i'm not looking into?   is my computer just too old for Yosemite? am I doomed to pay some mac wiz a ton of money? can all this just be a clunky OS and too little RAM?
i hope this helps other people and thanks for anything you have to add.

Also when I do a command R reboot, the computer freezes on the gray screen with the fan running vigorously. I have to shut it down by hand to do anything.

Satellite A665 beeping and sound issue

I have a Satellite A665 and when I start the computer, there is a long high pitched beep initially and then as it goes for a short time through the start up process, prior to Windows, it beeps again. The beeping is coming from the bios, I believe since I have uninstalled the sound components in Device manager to test this. Once Windows 7 is completely booted up and the sound components are reloaded, the speaker icon vibrates and has a continuous loud hum. It is a high pitched hum that never goes away and the icon vibrates like crazy. I have reseated the RAM and am at an impasse as to what to do. It does sound like a BIOS issue but not sure what the next step may be. It is 2 years old and out of warranty.
Thanks!

I have not tried updating the bios since the sound was so severe I doubted that would help but I may try that.
I uninstalled all sound devices in Device Manager and then rebooted and the sound was unchanged. That is what leads me to believe the issue is not with the sound devices. I had the speakers unplugged and the devices uninstalled and the sound remained unchanged. The only part the sound system plays in all this is that the sound icon (little speaker in the lower right hand corner) vibrates like crazy once Windows boots up and the devices are reloaded. If you turn up the sound on the speakers, the hum or beep is constant and gets very loud.
I have been repairing computers for over 40 years and I have never seen anything like this. Any help would be greatly appreciated!

Overprint Preview question and another issue...

Hi...
CS4, Win XP.
Overprint Preview question:
The other day i sent a file for printing (poster) in PDF and CS2 formats. For some reason, the printer converted the file to a .tif and then printed. Parts dropped out... Both the PDF and CS2 files looked fine.Description follows:
1/ Background black
2/ Design element over the black (blue lines to form a wave).
3/ Logo in red and white. Plus a line of text in red. And other text in white.
The white of the logo vanished. The red line of text kind of vanished... printed very faintly and only (i think in parts). Printer tried to do a patch job of printing the line separately and pasting... anyway... to cut a long story short, he wanted the final output in .tif. OK...
So, i converted to tif and sure enough... those parts vanished... did a search here and found the solution - view file in Overprint Preview and then in Attributes, turn off the Overprint Fill... so all well...
So, the question is, why does this happen? And, how, do i know in advance that x or y is likely to cause a problem? I have noticed in Bridge that sometimes, parts of a logo or a line of text does not show... but looks fine in AI or Acrobat... now realise the cause, but not the reason.
The other issue...
Same black background(s)... placed Photoshop file/s with a transparent background... Prints fine at the printers (various machines and media) ... But on the laserprinter an HP Color Laser Jet CP1510 series, there's a dark patch around the image (the actual file area).
Again, any ideas?
Cheers...
S

PrepressPro1 wrote:
<snipped>... so if your looking for this forum to play detective and tell you who in your workflow set the elements to overprint, I don't think this can be done. I don't think I have ever seen Illustrator set any elements to overprint all by its self. <snipped>
Hi PrepressPro...
Many thanks for your earlier inputs, but not quite sure where you got the idea that i want someone or anyone to play detective... i've understood the Overprint problem... and moved on. If anything, maybe i was just musing and wondering if any particular action turns on "Overprint Fill"...
Or maybe, i was referring to the second question which has not been resolved yet... Quoting it below for easy reference:
++++
The other issue...
Same black background(s)... placed Photoshop file/s with a transparent background... Prints fine at the printers (various machines and media) ... But on the laserprinter an HP Color Laser Jet CP1510 series, there's a dark patch around the image (the actual file area).
++++
To elaborate, the pix above are product shots which have been cut out and placed on a transparent background... The PS file is then placed in AI CS4 with the object option selected to maintain transparency. The transparent area is printing darker on the printer above. But is fine when sent to commerciqal printers...
Attached is a scan of the problem...

Small "freeze" and sound issue when taking a full screenshot

Hello,
This is a strange one, and I've not been using Macs properly for very long, so bear with me
It only happens when I use cmdshift3 to take a full screenshot, the other shortcuts for taking them are fine, I do get a similar issue when using Grab and it, too, only occurs on the full screen capture. What happens is, the sound clip of the camera noise will begin to play, stop, it goes a little distorted then the windows on screen will freeze up, the mouse will still move, and it stays like that for around 5 seconds until the file is saved to the desktop and all goes back to normal again. I'd like to reiterate that it only does this when i do a full screenshot, and the smaller one with the crosshairs and the individual windows is perfectly fine.
I tried searching on google, on the main support section and the forums and nothing has come up that's been helpful. I've had a look in the system logs, and at the time's I take the screenshot, the system log reports the following:
Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,728)->(3,7bd).
Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,728)
Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,71a)->(3,7ec).
Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,71a)
Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (4,73a)->(5,7c8).
Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (5,73a)
I know from that it's referring to my soundcard and there's a memory reference, but that's about as much as I can figure out.
It might not seem a big issue as the other methods are ok, but if it turns out to be something much deeper I'd like to try and fix it now before it becomes a problem.
Does anyone have any ideas?
Thanks,
Claire

Bingo! EXACT same problem here! It seems to me its a software bug.. ??

Preview Drag and Drop Issue

I use preview in school a lot. Converting lectures to PDF is a lot easier to use and i us a program called iFlash to make flash cards.
What I want to do is use the text tool to highlight sections of text, drag them to the flash card window and then drop the text there. This is a really quick and easy way to make the flash cards.
This works except when i click back to the card all the text that i dragged is deleted.
Does anyone else have this issue. I have checked, this feature (highlight and drag...) works well in other programs (mail, pages) but not with my flash card program.
Any ideas?

I have checked, this feature (highlight and drag...) works well in other programs (mail, pages) but not with my flash card program.
That suggests that the problem is with iFlash. Will it accept drags from other programs, besides Preview? If not, it probably doesn't support drag and drop at all. If it does, then its implementation is probably buggy, and you should contact the developer.

MSI GX60 Destroyer Start up and Sound Issues

Once again I have encountered an error where after receiving a new update for Windows 8.1, I now have the issue where start up programs will no longer start up for over an hour or longer from when the system starts, as well as I can no longer turn on my sound as I constantly receive the error message "The Audio Service is not running" and anything I try will not restart it whatsoever.
I have had this issue before and due to extra issues, I have had to completely send off the system for repairs at the repair center. However, I feel that this is more being caused by the update itself, also seeming as this will be the third time within around 2-3 months I have had to send this system off, if I cannot solve it without sending the system off I will likely be seeking a refund instead due to the negative experience with this system.

Quote from: CloverSquirrel on 18-October-14, 08:40:01
Those links don't help as I already tried some of those solutions, the issue isn't that I have a slight delay, its that the programs don't load for around an hour or more at the moment. Also I still have the audio issue with the system as well and now I recently found I can no longer go into the control panel either.
Then your issue isn't related to the system not working at all. It really sounds to me that you have a virus of some kind. Do you use a virus scanner?
Do you install questionable material? (aka pirated games/software?)
The more and more that you actually go into detail about the 'problems', the more it seems to me that you've got a virus.
Lastly, you really need to do a much better job explaining what the problems are. Giving people trying to help you half the story (oh, yeah, also audio doesn't work and I can't go into control panel....) only leads to us not being able to help you. You might want to look into this to get a better idea of what information will get you a better response much quicker:
>>Posting Guide<<

IBM x31 pcmanfm LXDE usb disk and sound issue

How can I auto mount external USB disk
my daemon list looks like this
DAEMONS=(@syslog-ng @hal @network @net-profiles @netfs @crond @fam slim)
and modules look like this
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e100 eepro100 mii slhc rt2x00lib rt2x00pci rt61pci ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore vboxdrv)
Also I am not able to hear no sound, I am in the audio group and ive seen channels through alsamixer
anyone else having issues
Last edited by venky80 (2009-01-22 04:16:08)

Hello Eugene,
Interesting - possible - coincidence. I just posted about a similar seeming issue here:
<http://discussions.apple.com/thread.jspa?messageID=10425731#10425731>
Notice that I've checked Disk Utility's repairs report as well as the System Log with Console: both show mention of USB related items.
This may not have anything to do with your issue but I thought it worth mentioning.

Embedded video's and sound issue

I have a keynote presentation I have created and I embedded a video in one of the slides. The video plays just fine on the iMac with sound but when I play it through Apple TV or a projector the sound doesnt come through the TV or sound system just through my laptop. How do i get the sound to come through the TV?

I assume you have used the headphone jack to connect your computer to the sound system. You have to go into system preferences and make sure the SOUND is set to output to the Line Out and not the internal speakers.
If you are AirPlaying it might be an issue with the age of your computer or you don't have Apple TV selected as the SOUND output preference.
Check your sound preferences to make sure the sound is being sent to the right place.

IPod Play/Pause and Sound Issue

After the recent 3.1.2 update I'm having a problem with my iPhone's sound cutting out. It's not the speaker because I can reboot the iPhone and it will come back. I'm also having the issue where when I hit the play button in the iPod app after it switches to the pause button it immediately reverts back to the play button. Has anyone had/resolved the issues?

I was just coming in here to search for an issue like this, and found this thread.
I started experiencing what seems like this same issue yesterday. When playing MUSIC ONLY on the iPod, iPhone 3G, random skipping, within the songs, pausing etc. is occurring. This is not occurring when playing podcasts however.
The other oddity here is it does not happen, when playing through headphones. It's only happening when using an auxiliary cable through my car stereo. I know there is nothing wrong with the jack, or plug, as other devices, including another phone\ipod work just fine.
I'm calling Apple regarding this as I literally just had the phone replaced due to a problem with the ring\vibrate switch falling off, so this is a new\replacment 3G. It's been updated to the latest of everything, so this is really disturbing me at this point.

RAM Preview framerate and sound issues

Similar Messages

Maybe you are looking for