RAM PREVIEW VERY SLOW (FAR FROM REAL TIME) ON NEW MAC PRO

Good afternoon
I have the new mac pro with 8 cores, 64 Gb of Ram and dual AMD 700 graphic card, but the preview on After effects is slower than in the old mac pro (from 2010). I have set the preferences as told in your website and everything stills the same. Could you please advice? is very frustrating to see that a new machine works worse than the older one.
thanks

Attached below you can see some screenshots from the settings I have on AE CC

Similar Messages

The internet very very slow and drop in my brand new Mac pro OS X 10.8.3 any help!

I bought new Mac pro with Retina display (OS X 10.8.3) , I am suing Wifi and the Internet very slow and drop most of the time compare to my other Mac OS X10.7.4! any advice. Thank you

Pete
If multiple people are seeing the same problems after making the same changes it is hard to believe that each problem is fundamentally different. To say that a change is specific to a single configuration implies that every computer and every operating system installation are different. This is not rational. Treating each problem individually fixes one problem. Finding the root cause fixes all the problems. I am familiar with finding root cause of communication systems - in particular mission critical spacecraft command and telemetry links. That experience teaches me to break the problem into pieces. My troubleshooting indicates a very high packet loss between my computer and my wireless router. In the exact same configuration with with two other devices i see negligible packet losses. i can go outside my home network and see the same ping and traceroute evidence in comparing the devices. That rules out my ISP, my email provider and pretty much isolates the problem to the router Mac link. Is this thinking flawed? Can you suggest additional tests I can run to further isolate the dropped packet problem? Further, no hardware has changed in my configuration. The only change is the upgrade to 10.8.3.
In posting to other threads I am trying to find if there is evidence of the same problem and to determine if there is any other way to gather evidence, and perhaps suggest ideas that folks might double check their fixes. In doing so you aggregate the problem and not decimate it. The problem in this thread may not be solved if a packet loss is still present. I am seeing packet losses as high as 60%; an iPad at the same location is seeing less than 0.1%. The network connection will work with high packet losses. You know that is what TCP/IP does but why accept 20%, 10% or 5% packet loss if you know it should be much less than 1%. The problem can only be determined if it is tested.
I have created my own thread - I linked to it.
If you prefer to not allow comments on closed threads I would suggest closing the threads to editing. In the future I will link from my thread to the solved one however if my thread finds a better solution there will be no way of pointing from the closed thread to a better solution.
My apologies for attempting to perform a methodical root cause analysis.
Mike

AE CS6: How to Ram preview or playback in smooth real-time everytime?

Hi guys,
I would like to know how to Ram preview or playback in smooth real-time everytime? I'm using a videohive template and adding in my footages to the media holder comps. The AE template is complex I guess.
Hee's the problem, everytime I make a change to text, add a footage replacement or make any change at all, I have to completely render and wait a long time to see my final product in "Real-time"/smooth. Is there someway that I can render out the whole thing once and even though I make a change the entire video will play smoothly without rendering time?
PC Specs:
HP 510t
Windows 8 Pro x64 bit
16GB Ram
i7 2600 CPU @3.4 GHz
GTX 660Ti

Proxies don't affect rendering beyond the point of reducing the resolution and thus the nuimer of pixels that need to be processed, but since the retain the effect properties at full resolution, e.g. a large blur still renders just as slow. They are more a means of reducing file I/O bandwidth while working really.... As I said, the best way to optimize this would probably be to restructure the project so parts that don't change reside in separate pre-compositions and can use the disk cache.
Mylenium

Reinstall Adobe CS6 from hard drive onto new Mac Pro

Hi, I downloaded the Adobe CS6 in 2012 and recently bought a new Mac Pro. I have the applications on my hard drive and I don´t know how to reinstall it onto my new computer. I have the serial number and information. Any help would be appreciated!

You should check your Adobe account online to see if there is a link provided for you there.
Alternatively, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Alternate trial resource:
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
http://prodesigntools.com/adobe-cs6-direct-download-links.html

AE CC ram previews very slow - no GPU support? Newbie trying to become not newbie, falling at first hurdle...

Hello. I'm currently trialling After Effects CC though Adobe Cloud. But I've hit a snag immediately.
I have an HD video edit in Premiere Pro which I want to dynamically import into AE to work on some bits.... I have imported the project file into AE, it seems to open just fine but the playback is intensely slow!
I have an uncertified GPU - a Nvidia Geforce gtx 460 - too old? I was expecting it to help out a bit, I'm not doing anything too badass, just colour correcting a bit of HD footage.
My processor is an i5 3.4ghz 4 core.
Perhaps I'm missing something fundamental here!? Please tell me what I'm completely failing to grasp
Thank you for your time,
Tony

Yup -- you're misssing a very basic item: AE doesn't work like Premiere Pro. It's not anything like PP, and it doesn't behave like it.
One way is the method you need to play video. Space bars just don't work. You need to do a RAM Preview -- hit the zero key on the numeric keypad, let AE render the frames it can, and then it plays them back as fast as it can.

Slow wired and wireless connections on new Mac Pro

I have a new 6-core Mac Pro with 64GB RAM that I seem to be having major network issues with. When I restart or first switch the machine on it's fine but after a few minutes the network (web browsing) become painfully slow - when I run a speed test it come out at ~2Mbit/s. This is the same whether I connect on a wired or wireless connection. I've tried various connections including a complete bypass of my time capsule to a direct wall connection that should be giving 100Mbit/s. When i run a speed test on my iPhone connected to the time capsule via 5GHz I comfortably get >60MBit/s.
Is there a bug in the latest OS 10.9.4 my MBAir also seems to require a lot of restarting to keep up even basic web browsing???

Your Macs are always looking for a better connection. To that end, they are evaluating every possible way to get to the Internet.
It is very important that you limit those choices to only the ones you actually want to connect to, and indicate that the other are "off the list", literally.
For example, to test your wired network connection, Ethernet must be at the top of the list AND WiFI must be OFF. (Otherwise, your Mac will be checking WiFi to see if it seems to be getting a better connection over WiFi. In the screenshot below, Ethernet is at the top of the list, so it is likely to be used, but since WiFi is still ON, it may be used instead.
To check YOUR WiFi connection (and not your neighbors' connections), you need to BOTH check that the "ask to Join new Networks" box is checked:
and that the Networks you wish to join are shown in the order you wish to join them. All extraneous networks should be removed from this list:

New OIF installation - Very slow response from OHS

Hi,
I've installed two instances of OIF 10.1.4.0.1 in order to create a test configuration to test XASP Attribute Sharing (i.e., we are not doing any other profiles).
Both OIF instances are using a separate instance of Sun Directory Server as its User Data Store, and both are using in-memory for Transient Data Store and have no Federation Data Store. Both OIF instances were installed similarly, using the "BASIC" installation choices, and are running on separate Redhat Linux servers.
The problem that we're seeing is very slow (10+ seconds to 30+ seconds) responses, even when we try to access a static HTML test page that we've placed in the OHS htdocs directory.
We've eliminated any networking problems as possibilities by a couple of tests that we've done, including shutting down the OHS and running a small, different test web server listening on port 7777. When we do that, response time for requests from that web server is almost instantaneous.
We are also seeing the same slow response when we try to access the test HTML page from the same server itself.
We have an SR open with Oracle, but so far, we've not been able to identify what the problem might be, so I'm hoping that perhaps someone else may have encountered this problem and have a resolution.
It is really puzzling because, as I said, this is a pretty vanilla default OIF installation, and it is doubly puzzling because even getting a tiny static HTML page is taking 10+ seconds. Also, I had installed OIF 10.1.4.0.1 on a Windows machine previously, and I don't see this problem on that earlier installation.
If anyone here has any insight into this problem, please let me know.
Thanks,
Jim

Hi,
I think I was able to temporarily eliminate this slow response problem. I think that the slow response problem is related to another problem that I posted about in the "Application Server - General" forum (see below, and Port 7200 conflict?
Jim
======= POSTED to Application Server - General forum ============
I think that I was able to temporarily work around this problem, plus another problem that I think is related (see: New OIF installation - Very slow response from OHS
What I did was to just comment out the "include" line for "dms.conf" in the Apache httpd.conf.
Doing that got rid of the "Address already in use" errors I was seeing in Apache error_log and also eliminated the slow response I was seeing from Apache/OHS (see that other post in "Identity Management" forum), BUT I am getting new errors about Apache not being able to find "htdocs/dms/Spy0".
I have the impression that dms is some kind of process monitoring system that Oracle has in 10gAS infrastructure? So, I have some questions:
1) What's the effect of dms not working?
2) Is it possible to just disable dms?
I hope that Oracle support can come up with a "real" fix for both problems, but in the meantime, as long as what I did doesn't break anything else besides dms, we can at least test the OIF stuff.
Jim

Send mail from real time

can i send email from real time (vxworks) cRIO. using smtp vi's.

Hi Mazhar,
Please look at this discussion forum for more information on using smtp with your cRIO. At this point, as I understand, you are connected using a router on the same subnet. As mikes81 has pointed out you do have to configure the IP settings accordingly.If you set MAX to obtain IP settiings automatically it should populate all the fields by itself. Hope this helps!
Ipshita C.
National Instruments
Applications Engineer

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection. This is so that end users who are non technical are not disturbed and only the I.T is aware of the viruses in teh environment.Shahid Roofi

You could set policies which when a malware detected an action perform automatically without user interaction but there is no GPO which stop the notification, one reason could be that when notification keep appearing, then user will know something is wrong
otherwise why FEP should display any warning.

Back up is very slow on 2 tb time capsule. After 2 days only 60 gb of 320 gb completed. Have connected ethernet cable. Any suggestions?

Back up is very slow on 2 tb time capsule. After 2 days only 60 gb of 320 gb completed. Have connected ethernet cable. Any suggestions?

Yes, that's terribly slow. You should get somewhere in the neighborhood of 20-24 GB/hour via Ethernet, assuming there isn't a lot of conflicting network traffic or your Mac's CPU is under very heavy load.
Are you sure you're actually using the Ethernet connection, instead of WIFI? To check, turn Airport off. If the backup fails, it's on WIFI. In that case, you need to set Ethernet as the "preferred" network, via System Preferences > Network. Click the "gear" icon at the bottom of the sidebar and select Set Service order. Then drag Ethernet above Airport. When both Airport and Ethernet are on, that will make OSX select Ethernet over Airport.
If that doesn't help, see #D2 in Time Machine - Troubleshooting.

I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

Adobe Bridge CC very slow on New Mac Pro

Im running both Bridge CC (6.1.0.115) and CS6 on my New Mac Pro
the Bridge CC is obviously slower than Bridge CS6.
CC also very easy to get the spinning ball every click on Bridge CC, very annoying.
Also Im using Dell 4K monitor, If I load monitor size preview will be really slow, even on the New Mac Pro. is there any way We can set a specific size of the preview? which can speedup the preview loading

If you go to the menu File > Project Settings > General and set the Renderer to Software Only, any change?
MtD

Why is the boot time on my mac pro 2010 slower than my 2010 core 2 duo 13 mbp?

Why is the boot time on my mac pro with clean install of lion around 34 sec on my mac pro 2010 2.8 quad core, when it is only around 17 sec on my 13 mbp 2.67 core 2 duo?
The mac pro uses around 13 seconds from i hit the power button til i hear the chime and see the grey screen.
Is it because it uses time to find the wireless keyboard, trackpad and cinema display?
Mac pro has 16 gb ram and 240 gb ocz agility 3 ssd, macbook pro has a intel 120 gb ssd (320 i think) and 8 gb of ram, so the mac pro has more umpf....

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1

I have this on both machines running 10.10.1 OS X and AE 2014. I see on line that others are having this issue. I think it needs a Patch ASAP.

Hello. Basically I can create a new comp that is set to 1920 x 1080, @ 30 frames per second for 1 minute TRT. I create a new solid layer, say red. I hit space bar or play on the screen, and it does not play in real time. ITs on my Imac as well. same OS and Same Version software.
After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1
created by Dave LaRonde in After Effects - View the full discussion
Well, before you hit the panic button, why don't you tell us precisely what you're doing when AE plays at 17fps -- the keys you hit, the buttons you click to begin play.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7102588#7102588 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7102588#7102588
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Geoffrey M. Wetzel
[email protected]
[email protected]
302.353.0798

My wifi is very slow after installing mountain lion on my Mac book pro

My wifi is very very slow after installing mountain lion on my MacBook pro.
What can I do?

Ha ha, I misread that as "My wife is very slow after installing mountain lion on my Mac book pro"
BTW on my MBPro (late 2009 with max RAM) Mountain Lion runs very well with no slowing down.

RAM PREVIEW VERY SLOW (FAR FROM REAL TIME) ON NEW MAC PRO

Similar Messages

Maybe you are looking for