RAM related issue...

I have an iMac 21.5" mid2010 and a macbook pro 13" early2011 both with preinstalled 2g + 2g ram
Can i do this:
1) Buy 4gb + 4 gb more ram
2)insert this into my MBP and take out the preinstalled 2gb + 2gb
3) insert the 2gb + 2gb taken out from my MBP to iMac's extra 2 slots
4) so i'll get 4gb + 4gb ram in MBP and 2g + 2g + 2g + 2g on iMac. thus making it 8gb in both the macs

Hello! Check the Specifications on both Macs before hand. Then check again. If I am not mistaken, the MBP will be different than the iMac. Go to the Apple top left of Menu Bar and click About This Mac to view each of the Mac's specs. Search Apple Support for both of the Mac specs as well. Don't forget to include the year on each. Do this before and verify to make a good sound decision on upgrading your RAM. Wrong RAM may allow your Mac to boot up but have intermittent crashes or not boot up at all and cause CPU/board damage. The old carpenter's saying "Measure twice - cut once."

Similar Messages

Ram related kernel panics on a MBP (ram used to work, hardware errors-)

hello all
i have a 2.2GHZ intel core duo 2007 MBP, which once ran Tiger and is now running 10.6.3
I had the NVDIA graphic card break down associated with such models, and it was replaced thanks to the extended care plan, here in Paris, so the logicboard is new- I also got a (technician installed) new HDD, and snowleopard
I originally had the 2 1Gig ram, but 1st got an extra 2Gb of danelec ram, and finally another 2GB- it ran fine for a couple year or so-
then, a few months back I recently started getting kernel panics, on tiger- I fist thought they were HDD related, got a new drive installed by a technician, switched to snow leopard-
yet they continue, and they're apparently RAM related, yet what is odd is that they can be reproduced with any RAM combination involving 2 sticks- the original apple 1Gb + any of the two GB ram sticks, the 2GB ram sticks together in any slot-- it's all the same, the screen goes grey and i'm told to shut down the computer
with one ram stick it works, this avoids the issue- but not always
i've moved the ram around, checked the slots, reset the PRAM,yet the issue is still there.
now i know that I should be using paired ram, and will do so in the next coming months when I can afford it- yet what has happened to make the make the MBP seemingly refuse two sticks of RAM when it didn't before ? are the two sticks dead ? or is there an issue with the slot ?
I'd also need to know that this is not a logicboard issue if it's possible- the logic board was changed due to the NVDIA bug, so it's a year old or so-
I'm running it on the 2GB danelec as I type, no issue, the samsung ram works as well, and so does the 1GB apple ram, in any slot, yet two slots of ram causes the kernel panic crash- the area near the ram slot also seems to get very hot-
I ran the hardware test yesterday, booting from the tiger dvd, which was difficult (possible drive issue)
finally managed to boot into hardware test mode (must be a superdrive issue)
running an extended test with the 4GB of ram in there
first pass found an error :
4MEM/9/40 000 000 : bc13950
running the extended testing
extended testing (1h39 min)
no errors found
ran another quick test
error
4MEM/9/40 000 000 : 6b506C4
another quick test :
no trouble found
another : no trouble found
and a last pass : no trouble found
but i did have two errors...
looking the errors up online didn't give anything so far, any clue as to what might be wrong here ? the RAM used to work fine (i've been using these two sticks for over two years), the kernel panics started happening on tiger- got a new HD drive a month ago, installed snow leopard, - used disk warrior and disk utilities, reset the PRAM and did the other tests and it continues- wether i'm running the computer from the internal drive or an external firewire drive-
running the hardware test, i also got two error messages, but on some passes only
if i look into the RAM status through about this mac, it says it's ok - what's odd is that the hardware test found errors, but not systematically----- I'd really like to know what the error message mean, can anyone help ?
i'm getting more and more kernel panics, unfortunately i live in France, so things are slightly less simple than they would be in other places customer servicewise- ie it might not be as simple as showing up at the new apple stores with this 2007 machine--
I need a stable machine to work on and really can't afford repairs at the moment
i'm really stuck with this, my finances got sucked into the last HDD upgrade (got it done by an official apple retailer, ICLG here in Paris, cost me 300 euros), and I thought things would be stable for a while since the logic board was changed (free of charge, which was a great relief) less than a year ago due to the nvdia bug- and now here I am with this--
anyway, here's the last kernel panic report i got, thanks in advance for your help
ben
Interval Since Last Panic Report: -28202 sec
Panics Since Last Report: 6
Anonymous UUID: FD865E22-C8DD-4791-889D-B5E5B374745E
Tue May 25 18:53:11 2010
panic(cpu 1 caller 0x55507c): "!pageList phys_addr"@/SourceCache/xnu/xnu-1504.3.12/iokit/Kernel/IOMemoryDescriptor.cpp:1 412
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x36413718 : 0x21b449 (0x5ce420 0x3641374c 0x2238a5 0x0)
0x36413768 : 0x55507c (0x5d7af8 0x320 0x36a20b4 0x320)
0x364137e8 : 0x54c208 (0x5f03300 0x3 0x560a200 0x80)
0x364138c8 : 0x54c733 (0x560fd80 0x80 0x54c81c 0x54c94c)
0x364138f8 : 0x129e3ba (0x560fd80 0x36413960 0x36413948 0x36413968)
0x36413988 : 0x12a7d67 (0x560a300 0x5f03300 0x0 0x1000)
0x364139d8 : 0x12a8edb (0x560a900 0x560a300 0x602d100 0x0)
0x36413ab8 : 0x1281448 (0x560a900 0x602d100 0x36413b28 0x36413b24)
0x36413b58 : 0x12a8c63 (0x560a900 0x5e59700 0x2 0x0)
0x36413bb8 : 0x12a9716 (0x560a900 0x560a300 0x36413be8 0xed5570)
0x36413c28 : 0x1298939 (0x560a900 0x36413c5c 0x0 0x54c94c)
0x36413c88 : 0x1296569 (0x560dc00 0xffc1 0x36413da8 0x36413cb8)
0x36413cc8 : 0xedc2cf (0x560dc00 0xffc1 0x36413da8 0x36413d08)
0x36413d28 : 0xebec0e (0x560ca40 0xffc1 0x36413da8 0x36413d68)
0x36413d88 : 0xebedb8 (0x54a2000 0xffc1 0x16 0x305c420c)
0x36413e48 : 0xf0d9f0 (0x54a2000 0x305c420c 0x6 0x3)
0x36413ea8 : 0xf02da0 (0x553cf40 0x1 0x5466c58 0x0)
0x36413f08 : 0x5478e3 (0x54af000 0x553a700 0x1 0x5413300)
0x36413f58 : 0x546914 (0x553a700 0x603969c 0x36413f88 0x227155)
0x36413f88 : 0x546d6e (0x5413cc0 0x6039680 0x36413fc8 0xffffffff)
0x36413fc8 : 0x29e6cc (0x5413cc0 0x0 0x10 0x5a05904)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOFireWireSerialBusProtocolTransport(2.0.1)@0x12a6000->0x12aafff
dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.2)@0x127b000
dependency: com.apple.iokit.IOFireWireSBP2(4.0.6)@0x1295000
com.apple.iokit.IOFireWireSBP2(4.0.6)@0x1295000->0x12a5fff
dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000
com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.2)@0x127b000->0x1294fff
com.apple.driver.AppleFWOHCI(4.5.7)@0xefa000->0xf1ffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000
com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000->0xef9fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10D578
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 38155557254
unloaded kexts:
(none)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.7.2 - last loaded 34201995231
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.8.4fc3
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AirPort.Atheros 422.19.10
com.apple.driver.AppleGraphicsControl 2.8.56
com.apple.driver.AppleBacklight 170.0.16
com.apple.driver.AppleLPC 1.4.11
com.apple.GeForce 6.1.0
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d1
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.1.1d0
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303
com.apple.driver.CSRHIDTransitionDriver 2.3.1f4
com.apple.driver.initioFWBridge 2.5.3
com.apple.driver.StorageLynx 2.5.3
com.apple.driver.Oxford_Semi 2.5.3
com.apple.driver.LSIFW500 2.5.3
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 2.5.3
com.apple.iokit.SCSITaskUserClient 2.6.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.1
com.apple.driver.AppleUSBHub 3.9.6
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.1.1
com.apple.driver.AppleFWOHCI 4.5.7
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 3.9.6
com.apple.driver.AppleUSBUHCI 3.9.6
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.5
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 104.3.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 104.3.0
com.apple.driver.AppleHDAPlatformDriver 1.8.4fc3
com.apple.driver.AppleHDAHardwareConfigDriver 1.8.4fc3
com.apple.driver.DspFuncLib 1.8.4fc3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.nvidia.nv50hal 6.1.0
com.apple.NVDAResman 6.1.0
com.apple.iokit.IONDRVSupport 2.1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.1f4
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.8.4fc3
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.iokit.IOHDAFamily 1.8.4fc3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.1d0
com.apple.driver.CSRUSBBluetoothHCIController 2.3.1f4
com.apple.driver.AppleUSBBluetoothHCIController 2.3.1f4
com.apple.iokit.IOBluetoothFamily 2.3.1f4
com.apple.iokit.IOUSBHIDDriver 3.9.6
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.2
com.apple.driver.AppleUSBMergeNub 3.9.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.2
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.2
com.apple.iokit.IOUSBUserClient 3.9.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOAHCIFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 3.9.6
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.2
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 2 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: SAMSUNG HM250HI, 232,89 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
FireWire Device: OXFORD IDE Device 1, Macpower, Up to 400 Mb/sec
FireWire Device: OEM ATA Device 00, OEM, Up to 800 Mb/sec

crashes are continuing - can anyone help out ?
thanks
ben
Interval Since Last Panic Report: 1184223 sec
Panics Since Last Report: 15
Anonymous UUID: FD865E22-C8DD-4791-889D-B5E5B374745E
Fri May 28 21:24:56 2010
panic(cpu 0 caller 0x2a8ac2): Kernel trap at 0x0027a72b, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000004, CR3: 0x00100000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x0000007e, ECX: 0x091f0000, EDX: 0x00000000
CR2: 0x00000004, EBP: 0x56f43378, ESI: 0x048077c4, EDI: 0x00000000
EFL: 0x00010297, EIP: 0x0027a72b, CS: 0x00000008, DS: 0x0d8c0010
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x56f43178 : 0x21b449 (0x5ce420 0x56f431ac 0x2238a5 0x0)
0x56f431c8 : 0x2a8ac2 (0x590478 0x27a72b 0xe 0x590642)
0x56f432a8 : 0x29e9a8 (0x56f432c0 0x20b35a20 0x56f43378 0x27a72b)
0x56f432b8 : 0x27a72b (0xe 0x48 0x56f40010 0x10)
0x56f43378 : 0x26c7dc (0x48077c4 0x0 0x6a300dc 0x6a300dc)
0x56f433c8 : 0x26cfd8 (0xd8c6f38 0x0 0x56f43458 0x2339ff)
0x56f433f8 : 0x26d256 (0x47ee6000 0x0 0x0 0x0)
0x56f43418 : 0x26de86 (0xd8c6f40 0x11000 0x0 0x25bdc1)
0x56f43458 : 0x260c3b (0xd8c6f38 0x30f383c 0x0 0x11000)
0x56f43588 : 0x260e32 (0x47ef7000 0x0 0x1 0x0)
0x56f435c8 : 0x259bfe (0x2ba8d74 0x47ee6000 0x0 0x47ef7000)
0x56f43608 : 0x220273 (0x2ba8d74 0x47ee6000 0x10005 0x53c5)
0x56f43628 : 0x22042a (0x47ee6000 0x10005 0x995720 0x10000)
0x56f43648 : 0x9931fa (0x47ee6000 0x10005 0x8115380 0x47ee6004)
0x56f43728 : 0x994941 (0x20000 0x0 0x10000 0x1)
0x56f437b8 : 0x994fb2 (0x9858304 0x20000 0x0 0x10000)
0x56f43c28 : 0x3105ea (0x87c268c 0x8077b00 0x7f1ec24 0x20000)
0x56f43c88 : 0x3121dd (0x20000 0x0 0x10000 0x0)
0x56f43d58 : 0x423e1a (0x56f43dfc 0x56f43dbc 0x87747e0 0x2f797261)
0x56f43dd8 : 0x2fafad (0x56f43dfc 0x3 0x56f43e28 0x57c50e)
0x56f43e28 : 0x2efffc (0x87c268c 0x56f43ec4 0x0 0x56f43f54)
0x56f43e78 : 0x49444a (0x86b6b20 0x56f43ec4 0x1 0x56f43f54)
0x56f43f18 : 0x494a8d (0x56f43f54 0x86b6b20 0xb0183f64 0x0)
0x56f43f78 : 0x4ec84e (0x87cf2a0 0x88fbd90 0x88fbdd4 0x0)
0x56f43fc8 : 0x29eef8 (0x893ee20 0x0 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0.0d1)@0x991000->0x99 6fff
BSD process name corresponding to current thread: firefox-bin
Mac OS version:
10D578
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 2721283483111
unloaded kexts:
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.2 (addr 0x56c88000, size 0x98304) - last unloaded 1855762560735
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 1269444306258
com.apple.driver.AppleHDA 1.8.4fc3
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AirPort.Atheros 422.19.10
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.GeForce 6.1.0
com.apple.kext.AppleSMCLMU 1.5.0d1
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.ACPISMCPlatformPlugin 4.1.1d0
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AppleLPC 1.4.11
com.apple.driver.AppleBacklight 170.0.16
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303
com.apple.iokit.SCSITaskUserClient 2.6.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.5.7
com.apple.iokit.IOAHCIBlockStorage 1.6.1
com.apple.driver.AppleAHCIPort 2.1.1
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBHub 3.9.6
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 3.9.6
com.apple.driver.AppleUSBUHCI 3.9.6
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.5
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 104.3.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 104.3.0
com.apple.driver.DspFuncLib 1.8.4fc3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.iokit.IO80211Family 310.6
com.apple.driver.AppleHDAController 1.8.4fc3
com.apple.iokit.IOHDAFamily 1.8.4fc3
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.1f4
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.IOPlatformPluginFamily 4.1.1d0
com.apple.driver.AppleSMC 3.0.1d2
com.apple.nvidia.nv50hal 6.1.0
com.apple.NVDAResman 6.1.0
com.apple.iokit.AppleProfileFamily 41
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.CSRUSBBluetoothHCIController 2.3.1f4
com.apple.driver.AppleUSBBluetoothHCIController 2.3.1f4
com.apple.iokit.IOBluetoothFamily 2.3.1f4
com.apple.iokit.IOUSBHIDDriver 3.9.6
com.apple.driver.AppleUSBMergeNub 3.9.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.2
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.2
com.apple.iokit.IOAHCIFamily 2.0.3
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBUserClient 3.9.6
com.apple.iokit.IOUSBFamily 3.9.6
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.2
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: SAMSUNG HM250HI, 232,89 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000

RAM previewing issue

Hi,
I'm working in After Effects CS4, and I'm having a problem when I try to RAM preview short sections of an animation project. The RAM preview keeps stopping before it reaches the end of the work area, and beginning again. I'm pretty new to the program, but I've also noticed the little green bars that, I believe, tell you if the section has rendered/processed always have little gaps in them. That may be related. I don't know.
Does anyone know what may be causing this RAM previewing issue?
On a side note, I'm using After Effects on a Macbook (not a Macbook Pro), and I'm wondering whether this problem may be due to the Macbook not being sufficient for After Effects and CS4 in general. (I had originally intended to install the program on my 2004-era G5 tower, but it wouldn't install After Effects CS4 because apparently the program won't work with PowerPC processors, only Intel ones. At least that's what I was told.) Anyway, I've wondered whether the RAM previewing issue may be due to the Macbook not being enough computer for After Effects/CS4. My Macbook has a 2 GHz Intel Core 2 Duo, 2 GB 1067 MHz DDR3 and 106 GB of available space.
Any insights on the RAM previewing issue and whether my Macbook isn't a suitable computer for these programs would be greatly appreciated.
Thanks a lot,
Neil

From the theoretical specs there is nothing that speaks against your notebook. Apparently the biggest hurdle for some users is to get it to run in the first place, but now that it runs, it's safe to say that you will be able to use it properly. Of course, to let truth have its way, you will become slightly peeved at a point and get that yearning for a new machine, when you use more functions and your projects become more complex. Especially the only 2GB RAM will then often become a show stopper and you will really hate Adobe when one of those dreaded "Could not creat X x Y buffer" or similar out of memory warnings pop up. Still, no need to rush. Take your time and see, if AE is even everything you thought it would be and then make clear, structured plans for getting a new computer. You wouldn't wanna spend another 2000 bucks on a spiffy machine just to run AE once a month.
Mylenium

Lenovo A7000 S142 Firmware After Update Users Related Issues

Dear Lenovo Smartphone Technical Team , Lenovo A7000 New Firnware Update S142_150630 ( 46.45MB ) Recd.On 06.07.2015, After Update Users Related Issues some of Given Below. 1 ) Wi-Fi Connection not working after update.2 ) Battery drop down at 20% to 15% immediate.3 ) Messaging Issue ( Takes Times To Response )4 ) Back Key Responding Lags Now5 ) After Update Phone Getting Little Bit Lags Now.6 ) Gameloft Mod APK Issue.7 ) Heating Issue ( While Game Play, Charging Time, Downloading Time, Camera Using Video Mode )8 ) Camera Video Portrait Mode Shooting not seen proper view while landscape Mode Watching.9 ) Phone vibrates on call connect even this feature is not enabled.10 ) Led notification lights are not working11 ) Touch Response Issues & OTG Issues.12 ) Camera Day light photos & videos superb but night or low light photos & videos not good.Guys I Had Research on each of reviews related A7000 and noticable issues mentioned above, if there any issue left by myside please you can mention it in this forum. We all Lenovo A7000 users request to Lenovo technical team to resolve those issues and give satisfactory update as soon as poosible so every users can happy with this & feel proude to use Lenovo brand. Thanks & Regards, Bhavesh K. Patel

yes Bhavesh i am totally disopointed its very poor support lenovo people first two days iam happy 3 day starting struggle becouse i updated s142 update. i am great fan of asphalt 8 but gameloft mod apk was not istalling.what necessary about Octocore proccessor 2 gb ram not installing mod apps totally waste of money this is not a mobile just like iron box

Can we set up a forum for Security related issues?

I know many of us think security is a Windows related issue, but from time to time there are security issues that may come up. I had a question so I looked and couldn't find a forum, so I posted in one of the OS X 10.6 sub forums.
Thanks!

I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
I am not aware of any other forums that deal with OS X security issues
exclusively, so this forum could be a good place to bookmark and visit from time to time.

To everyone with IOS6 Sound related issues & Others

If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
I am on the phone with apple care now. They seem to not be aware of the problem at all.
While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

Many Sporadic Preview Related Issues

Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
Preview panel "preview" freezes indefinitely.
App very slow to load while creating new previews. (previews take forever to create and update)
Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
The official forum for reporting bugs and making feature requests is at the web link below.
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

Unicode related issue in 4.6c to ECC 6.0 upgrade

Hi
I am doing upgrade from 4.6c to ECC 6.
Here I am getting one unicode related issue.
"The data object A948 does not have a component called ZZMATWA.".
This type of issues , how can I resolve.
I am very new to upgrade, Plese do help me.
Regards
Sandeep Reddy.

Hi,
Can you give the error what you are coming across.
Regards,
Suhas

RAM Preview issue

Hi,
I'm wondering if anyone has seen this or can provide some direction for further investigation. This is on a new Mac Pro on which I have just installed FCS
In some projects the RAM preview has no effect on playback performance. After generating a RAM preview, the project will play at the same speed (say 2 fps) and as soon as I pause playing, the green progress bar that indicates project is loaded in RAM disappears or becomes fragmented - without modifying the project in any way. When this happens it also becomes nearly impossible to do additional editing as every simple task (as simple as resetting the play range) can result in the spinning beachball. There was a recent thread on RAM preview issues (http://discussions.apple.com/thread.jspa?messageID=12215113&#12215113) but it appears the problem there was due to a long HDV project. The projects I experience this on generally have a lot of particles or replicated elements, but are standard 720 x 486 resolution projects lasting less than 10 sec. System memory usage is relatively small, less than 4 GB.
These issues arise on a recently purchased MacPro (3.33 GHz 6-Core, 16 GB RAM, ATI 5870). The boot disc is an OWC SSD, and user folders, scratch, etc are on separate hard drives. I installed the operating system on the SSD using the installation disc, and have manually installed all my programs from their original discs. (I initially used migration assistant to bring over applications, but that failed with some applications, so I wiped clean and started over). There have also been some past threads on how different hardware configurations can affect performance, but I don't seem to be doing anything abnormal here.
What I have done:
Tested ram using memtestosx
Verified memory usage through activity monitor. The projects I have tested on use up less than 4 GB of system memory
Before each test or comparison I reset preferences.
I do not have this flakey behavior with an older MBP (17" 2.93 GHz Core 2 MBP with NVIDIA 9600) running the same OS (10.6.4) and motion version (4.0.3). Running the same project on the MBP will take longer for the RAM preview to complete, but when it does, the project plays at full frame rate.
The upgrade to a MacPro was mainly for other CPU and RAM intensive applications unrelated to video or graphics, but I expected motion to show a nice performance boost over the MBP on this new machine. Anyhow, any insight or direction for further investigation that I should pursue will be appreciated.
Thanks.

I tried your project (nice, BTW), and yes, 20,000+ particles take some time to render. However, when I did a RAM Preview, I had no problems - after render it played at full speed.
UNTIL...
I selected the emitter. Then playback went to the pre-RAM-Preview speeds. As soon as I turned off overlays or made sure the emitter was not selected, the playback instantly sped back up to full speed. I believe this is because Motion needs to image the constantly changing outline of the emitter. This means it needs to be re-drawn every frame after Motion determines the extent/size of the 20,000 particles on their random journey.
I think this is backed up by the fact that near the end of your project, there are only a few particles to keep track of and the playback appropriately speeds up. Also, CPU usage vastly increases when I turn on the overlays.
Moral of the story? To ensure the quickest possible playback, turn off overlays (⌘/) or ensure that something like a particle emitter is not selected during playback.
Patrick

Hi, We are running domino application in windows server 2008r2 machine, we are facing High RAM utilization issue, but there is no such process are running.

Hi, We are running domino application in windows server 2008r2 standard virtual machine, we are facing High RAM utilization issue, but there is no such process are running. Machine is running in ESXI host, most of the time it shows high RAM utilization.
We upgraded the ram from 6 to 8 GB, but still facing the issue,
Where as other VMs working fine.
Need a help to find out the issue.

Hi Sathish sampath,
You can use Resource monitor and Task Manager->Performance to monitor the RAM memory utilization, I also recommend you to download the
RAMMap to get more detailed memory information.
For more detailed information to troubleshoot this issue, please also refer to this thread:
memory performance problem. Please help.
You can also choose to post your monitor picture to help us to troubleshoot.
I holp this helps.

How to add data in related issue field in issue tracking list sharepoint 2013

Hi,
I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

In PP Interface related issues the role of functional consultant

In PP Interface related issues what is the role of functional consultant . what is the approach steps to analyse and resolve the issues in XI, interface, idoc, etc.,

For issues relating to interfaces, a functional person would need to diagnose what is causing the issue & thereby informing the technical person where to fix it, if the issue is due to system setup.
As regards to the steps, I just wish there was a manual which read something like
10 steps on how to analyze....
unfortunately there is none that I have come across or even if one is ever written on those lines will be very specific, so not much of use for your need. A good approach would be to have a clear understanding of what the interface is supposed to do, which would assist you in fixing the issues.

How to Handle BARCODE related issues in WebDynpro ABAP

Hi All,
How to handle barcode related issues in WDA?
is it possible in WDA or not?
please provide information or any links related..
Thanks,
raj.

Hi ,
You just need to install the software comes with the barcode scanner in the local PC and while reading you have to put the cursor on the field like inputfield . a barcode when interpreted by scanner is nothing but alphanumeric words.
Regards
Yash

Performane related issue in Production Server

Hi,
when i deploy the whole application in development server (by remotely logging into client server through vpn) it works fine .
But when it is run at client side for system testing, user acceptance testing and
integration testing it becomes very slow .
Due to this performance related issue , we are not able to transfer the DCs to production server .
We are sure it is not coming from R3 side (BAPIs etc) . It is coming either from the Webdynpro or Portal side .
Can anybody help out regarding how to solve this issue .
Thanks .

Hi Narendra,
Please elaborate what is QAS customization and production customization.
TR has been done properly.
Let me give you an overview of the project.
In Organisational Assignment a Zprogram has been written which captures additional information like Grade Code, Designation Code & Pay Sheet Code
Its a govt. client. Combination of Grade Code & Designation Code is Pay Scale Grouping
e.g if Grade Code is A01 & Designation Code is A005
Pay Scale Grouping is A01-A005
If we put the values in 0001(Org Assignment) for Grade Code(A01) & Designation Code(A005), A01-A005 comes automatically in Pay Scale Grouping for a particular Pay Scale Structure.
But now the problem is Pay Scale Type doesn't come get defaulted in 0008 for a Personnel Area & Personnel Subarea.
I have maintained PST in Tariff & Check Assignment of Pay Scale Structure in Enterprise Structure.
But in 0008, We have to put PST manually. Since client is having only 1 Pay Scale Area for all Personnel Area & Personnel Subarea, so we don't have to bother for it
Please tell me where can be the error
Regards,
Usha

System relate issue

Hi friends,
im in guess of where to post system related issue, since this is my problem
run --> drivers --> host file,
i couldnt able to edit & save host file.
Tried below steps:
1. host --> properties --> Security --> add --> everyone --> given full control also.
2. Not able to do that in administrator account alsoWhich is the right place to post this question.
Regards,
Saro
Edited by: Saro on May 17, 2011 12:48 PM

Hi,
Probably in your OS provider support forum?
Regards,
Jari

RAM related issue...

Similar Messages

Maybe you are looking for