Ram to my KT Ultra VIA KT33 (MS-6380E) ATX

I wan't to expand my memmory on my komputer to 3GB. What kind of memmory would you sugest? (what will be the best kind?)
VIA KT333 Chipset Based
KT ULTRA (MS-6380E)
RAM TECH FROM MANUAL:
Supports six memory banks using three 184-pin DDR DIMMs.
Supports a maximum size up to 3GB.
Supports 2.5V DDR SDRAM DIMM.
Have a nize day!

i dont ever recall seeing a post by any one using 3 gb in that
i would suggest you try the crucial memmory selector
at least if they say they will work and dont they have a good rma policy

Similar Messages

  • Sata Raid problems with MSI KT4 Ultra Via kt400 chipset

    ok i am having major problems setting up my sata raid in my brothers msi KT4 Ultra via KT 400 chipset
    it comes up with my irq settings are wrong
    my hard drives are WD 120 GB 7200rpms SATA - sold my mobo asus A7N8X - Delux and used my bros mobo above but just cant get them to work if ne one has ne idea on how to fix it (bios is still factory default do i have too flash it to get it too work etc)
    would help lots thanx

    you dont need multiple threads on the same thing

  • MSI K8N Neo2 Platinum, Socket 939, nVIDIA nForce3 Ultra Chipset w/ 8X AGP (ATX)

    MSI K8N Neo2 Platinum, Socket 939, nVIDIA® nForce3 Ultra Chipset w/ 8X AGP (ATX)
    and a 3500 90 nm amd 64.........is this a god combo ......Im swicthing mine for this(just the cpu and mobo)  opions?..........any help is welcome...Its in the name of gamging...

    Quote from: duffyone on 31-March-05, 11:54:15
    Now... don't LOL, but there is a reason I picked the 3200+ instead of the 3000+, but I can't remember why???
    Probably because the 3000+ only has a 9x maximum multiplier, whereas the 3200+ will go to 10x.
    2600MHz at 9x means a FSB of 289MHz and ram at 289MHz for best performance.  Will your ram do 289MHz?  Of course you *can* run your memory and fsb async, but I prefer not to.
    Chip

  • Ultra 40  - Power supply Connector ATX?

    Does the power supply on the Ultra 40 use a standard ATX motherboard connector? (Among the three connectors)

    The Ultra 40 handbook shows a system board diagram and a left open view image of the system, this shows the power connectors to the system board, you can access this informtion by using your support contract to login to the system handbook.

  • Ram burned msi kt333 ultra

    Hi all
    I flashed my k7t266 MSI board with the wrong bios yesterday, so off course i had to get a new MSI board being the kt333 ultra. Today when playing CS the machine suddently switched itself off, not being able to reboot AT ALL. 3 long beeps occured. I found out that this was caused by fault i ram and i reinserted them which caused smoke to appear from the socket, upon trying one more time in another socket a spark appeared.
    Could this be caused by me setting "optimal performance" in the bios with my 9 months old Kingston "2100 /266 mhz. ddr ram"?  If that is the case do you think the whole board is broken or "just" my ram?.
    ...I suppose theres not any warranty covering this...
    When i power on the board now (without any ram) i keep getting the 3 long beeps.
    Thanks for any thoughts...
    /Towli

    It sounds awfully much like you tried inserting the ram with power applied. You have to rememeber that modern ATX PSUs still supply some power to the board when it is swithed off. It is always safer to unplug the PC before removing or inserting anything.

  • What RAM works with KT3 Ultra (Orig) ????

    Hey there,
    SORRY BIGDADDY.  Come to find out a new board
    did not fix the prob I am having probs with the OS. Not
    only that but several other programs don't work
    like burning software, drivers, and the new DX won't
    even install right.  I figured NEW CPU...but as you can
    see I need NEW RAM.  So instead of buying PC133 for
    almost the same price I figure get some DDR 2100 for
    about $10-20 more and the KT3 is $10 more.  Do the
    math here and I could substantially increase my comp
    considerably. :D
    Foreveryone out there I need to know what ram works
    with the KT3 Ultra.  I know this board is very picking
    about ram since the AMI bios is the issue.  
    I am looking at these:
    1) Kingston PC2100
    2) Crucial PC2100
    3) Micron PC2100
    Thanks in advance for any replies
    SladeZero980
    I also got a XP 1600 + for $66 from NEWEGG

    OK I found a few minidumps in the event log
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
    Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
    Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
    Hope these help

  • KT3 Ultra VIA VT8233A chipset problem

    I bought a KT3 Ultra mainboard with VIA chipset VT8233A.
    I tried to Install the Audio Drivers and nothing happends. I used 3 types of drivers two via and one Realtek.
    The Audio Codec 97 in bios is Enable.
    Help!
    [email protected]

    Quote
    Originally posted by Bas
    Hi,
    Are you sure the motherboard is mounted correctly in the case?
    All stand-off's removed that are not needed?
    Did you try to put the MSI cdrom in there and wait upto 2 minutes until the menu appears?
    Well I use to have a CreativeLive sound card from the begining so at the begining the sound on  board was disable. But now I have a second computer and I put the creative on that one and I want to enable the sound, this is the point when the big surprise show up.
    I have 2 MSI cd's one from this motherbordand one from an older one. When I lunch this cd on the driver section of the autorun I have only a Realtek Network adapter (which I have one already instaled), but if I browse the CD I can find a sound/via/4****? directory with a setup file. If I lanch the install it says "you don't have a Via Cipset" well it's a preaty BIG via on it. If I use the old cd I have 3 options one via cipset drivers 1 realtek network and one Via Audio Drivers but bought via drivers are disable like they are already instaled. If I lanch the Via Audio Drivers says "The VIA chipset is disable please run BIOS and Enable it" or somthing like that, so as I see it it's a BIG problem with the BIOS or the Hardware.
    sorry for this to long story

  • RAM problems with KT3 Ultra 2 causing STOP errors in XP

    I've run the NEC ncramtst program on my PC and its coming up with an error in the extended memory at adddress 1B8EE01C which probably explains the stop errors and problems I've been having in XP...
    I've tried reseating the RAM and tried a different slot but it still returns the same error.
    The PC is only 2 months old and I have only experienced stop errors in the last 2 weeks or so and usually are at random - and occur more often when copying files - or putting load on the PC.. any ideas why the RAM is only now causing errors and what the problem is?
    Are the problems definatly being caused by RAM or could it be the motherboard?
    Thanks in advance
    Ben
    MSI KT3 Ultra 2
    AMD AlthonXP 2400+
    512Mb PC2700 DDR RAM (with errors)
    80Gb Hard drive
    Geforce Ti4400 Graphics card
    Modem
    LAN

    OK I found a few minidumps in the event log
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
    Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
    Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
    Hope these help

  • Ram Problem With KT3 Ultra

    Hi Guys,
    I have posted on here before.
    I have a kt3 ultra mobo.
    The problem i have is when playing games the system locks up and i have to hard restart.
    I have followed advice from this board the the faq ant mobo bios set up which sadly has not solved the problem.
    Very strange but in the pc i have two x 256 meg ddr ram.
    If i take either stick out the pc plays games perfectly. This is frustrating as both sticks work fine on their own but not together.
    ANY IDEAS ? ;(

    Hi,
    Sometimes it happens that sticks just won't work together....
    You might want to swap one of the sticks with a friend to see if the problem is gone...

  • New MSI 6200 TD256 card in a KT4 Ultra (via) board,no boot, no page, help please

    Hello.
    just bought a new MSI Nvidia 6200 TD256  (http://www.newegg.com/Product/Product.asp?Item=N82E16814127186) and I put it in my KT4 Ultra board (via chipset).  I am using the newest bios (1.4) and Via 4in1 chipset drivers. 
    What happens is when I boot the machine, everything starts up, but I get no PAGE and the D-Bracket is hung at the "testing VGA bios this will print ..." (thats what it says in the manual).
    Now, I've done the best I can to research this issue, but best I can guess is this is a bad card and I should just return it for a replacement... the card does look fine, I see no physical damage and it seemed to be properly shipped. I did read that kt4 boards don't support 3.3v AGP cards... but I'm not really sure what that means.
    Anyways, if anyone has any insight on something I should try before I have to go through the return process that would be much appreciated.
    Thank you,
    -Cody

    Quote from: osnavi on 23-July-05, 09:34:35
    And did you uninstall old V.card before installing new ?
    if it doesnt get to windows, that doesnt matter.
    Quote from: Cazzynomo on 25-July-05, 10:36:30
    I'm using a good PSU 350w atm, and I did check it in another good system...turns out its a bad card.
    ok then its clear its a bad card.

  • KT3- Ultra aru board (ms-6380e series) processor question

    Ok i'm running a msi kt3 ultra aru motherboard with bios version 5.7
    looking at the cpu charts i'm slightly confused. What I'm wondering is can I run an athlon 3000 processor on this board? I know its going to raise the bus speed up but I'm running pc2700 ram right now so I dont see that being a problem.
    anyone either running a newer processor on this board, or who would know the answer, it would be appreciated....
    thx!

    You guys rock. Thanks for the feedback. haven't made the purchase yet, got a friend that manages a compusa thats supposed to be getting me a deal, we'll see I guess....
    THANKS AGAIN!!!

  • KT3-Ultra AUD 3 beep problem

    first things first
    MSI KT3-Ultra AUD
    AMD 1.4 ghz T-bird
    ATi Radeon 8500LE
    256 MB Muskin RAM
    I just thrw this computer together, the processor worked on my previous system.
    The D-LEDs on the back show the Memory to be the problem. Prior to sending the ram back, I want to see if anything else might be the culprit.
    The PSU puts out 180w on the +3 and +5 wires combined.

    steps I took:
    Cleared CMOS via Jumper
    Adjusted CPU FSB to 133
    set date and time to correct settings
    set boot sequence
    reboot
    Magical RGRR on the Dleds
    Cleared CMOS again
    Flashed BIOS
    Flashed BIOS again
    Reboot
    had to modify CMOS settings
    Modified CPU FSB ONLY
    Reboot
    RGRR on D-LED
    So we know the RAM works, we Know the Board works, we know the RAM + the Board do not always work.
    Contacting newegg right now, will go up to PC3000 Mushkin Ram whihc has shown to have no issues what so ever with the board.
    My recomendation is to trust Mushkin's website and not use thier 2700 Ram with the KT3-ULTRA-ARU.  Any helpful throughts or suggestions as I will not be able to mail the thing back to newegg until this weekend.
    Thank you to the board members for thier help. Thank you to MSI for a board that I hope to one day enjoy.  

  • KT4 Ultra, Video - Audio Conflict

    Doing an upgrade to a KT4 Ultra with VIA KT400 chipset and Athlon XP 1800. System will not boot past POST with the on-board audio enabled or on-board disabled and a PCI audio card installed.  After the card has been removed or on-board audio disabled it boots fine.  I've tried the PCI card in several locations as well as removed the old drivers.  Nothing seems to improve the situation.  Video is eVGA Geforce 4 AGP 4x card.  eVGA tech seems to think it was a problem with the VIA chipset.
    Any thoughts?
    Jim
    KT4 Ultra, VIA KT400, Athlon XP 1800, eVGA Gforce 4 MX440 64mb, (1) 256 Mb RAM, Win-ME

    Yeah. Check that sound card. What kind is it? I have three sound cards in my computer right now, in addition to the built in and one USB: Soundblaster Live! Value, SB Audigy Platinum EX and one Zoltrix Nightingale pro 6. No problem. So it's a fault, not a common behaviour. I actually have problems with a SCSI card on one KT4 but no problems with it on another one. So it might just be that the two cards does not like each other. I would have to say that computers are like women: We will never fully understand them, and sometimes they give you trouble for no apparent reason, but when they work as they should, they're hard to beat at what they do!  :D

  • Buying a new Macbook Pro for music recording, should I upgrade the RAM or Processor?

    As the title states, I'm looking into buying a new Macbook (15 inch) for music recording. Should I upgrade the processor or the RAM memory?

    Purchase it with the faster CPU.  RAM may be increased later via third party chips at much lower cost if and when required.
    Ciao.

  • White screen started appearing when in Logic? RAM issue?

    Hi there,
    Am a relatively knowledgable MBPro user. I've an old beauty from 2007 which has done me proud all these years. I recently upgraded the OS from the original Tiger ( ! ) to Snow Leopard and the last three months all has worked smoothly.
    Yesterday and today however when I've been working in Logic (still Pro8 - yes, I know!) the MBP starts performning verrry slooowwwwly (beachballs) and the white screen obliterates the arrange window. I've restarted a couple of times but the problem's still there when I open Logic and start running it.
    My ETreCheck details are below.
    Does anybody have any ideas as to how I mitigate this issue?
    Thanks!
    Adrian
    EtreCheck version: 1.9.15 (52)
    Report generated 2 October 2014 12:22:09 GMT+01:00
    Hardware Information: ?
        MacBook Pro (17-inch Core 2 Duo) (Verified)
        MacBook Pro - model: MacBookPro2,1
        1 2.33 GHz Intel Core 2 Duo CPU: 2 cores
        2 GB RAM
    Video Information: ?
        ATY,RadeonX1600 - VRAM: 256 MB
            Color LCD 1680 x 1050
            2367M 1920 x 1080 @ 60 Hz
    System Software: ?
        Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:8:58
    Disk Information: ?
        Hitachi HTS721010G9SA00 disk0 : (93.16 GB)
        S.M.A.R.T. Status: Verified
            - (disk0s1) <not mounted>: 200 MB
            Macintosh HD (disk0s2) / [Startup]: 92.84 GB (11.33 GB free) (Low!)
    USB Information: ?
        M-Audio Ozone
        Logitech USB Receiver
        Micron Built-in iSight
        BUFFALO HD-PCU2 465.76 GB
            S.M.A.R.T. Status: Verified
            - (disk1s1) <not mounted>: 200 MB
            BUFFALO BACKUP (disk1s2) /Volumes/BUFFALO BACKUP: 465.44 GB (48.83 GB free)
        Apple Computer Apple Internal Keyboard / Trackpad
        iLok iLok
        Apple Computer, Inc. IR Receiver
        Apple Inc. Bluetooth USB Host Controller
    Kernel Extensions: ?
        [not loaded]    com.Huawei.driver.HuaweiDataCardDriver (4.0.8) Support
        [not loaded]    com.digidesign.fwfamily.driver (7.4f1) Support
        [loaded]    com.digidesign.iokit.DigiDal (7.4f1) Support
        [loaded]    com.digidesign.iokit.DigiIO (7.4f1) Support
        [not loaded]    com.digidesign.mbox2.boot.driver (7.4f1) Support
        [not loaded]    com.digidesign.mbox2.driver (7.4f1) Support
        [not loaded]    com.m-audio.usb.midisupport.driver (1.1) Support
        [loaded]    com.maudio.usb.ozone.driver (1.8.1) Support
        [not loaded]    com.motu.driver.FireWireAudio (1.5 41560) Support
        [not loaded]    com.motu.driver.USBMidiKext (1.6 49190 - SDK 10.4) Support
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) Support
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) Support
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.3) Support
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) Support
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) Support
        [loaded]    tc.tctechnologies.driver.TCNear (3.5.6 11675) Support
    Startup Items: ?
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
        HWNetMgr: Path: /Library/StartupItems/HWNetMgr
        HWPortDetect: Path: /Library/StartupItems/HWPortDetect
        M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
        MAudioOzone: Path: /Library/StartupItems/MAudioOzone
        Qmaster: Path: /Library/StartupItems/Qmaster
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.bombich.ccc.plist Support
        [running]    com.bombich.ccc.scheduledtask.B5EE8738-6951-42B0-8CD7-BB586DD6B937.plist Support
        [running]    com.digidesign.fwfamily.helper.plist Support
        [running]    com.m-audio.usb.firmwareloader.plist Support
        [running]    com.paceap.eden.licensed.plist Support
        [running]    org.glimmerblocker.proxy.plist Support
        [loaded]    PACESupport.plist Support
    Launch Agents: ?
        [loaded]    com.hp.help.tocgenerator.plist Support
        [running]    com.motu.MOTULauncher.plist Support
        [loaded]    org.glimmerblocker.updater.plist Support
    User Launch Agents: ?
        [running]    com.bombich.ccc-user-agent.plist Support
        [loaded]    com.macpaw.CleanMyMac.helperTool.plist Support
        [loaded]    com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
        [loaded]    com.macpaw.CleanMyMac.volumeWatcher.plist Support
    User Login Items: ?
        System Events
        Activity Monitor
        Dropbox
        HPEventHandler
    Internet Plug-ins: ?
        Flip4Mac WMV Plugin: Version: 2.3.6.5 Support
        FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
        Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.6.6
        Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
        Google Earth Web Plug-in: Version: 7.1 Support
        iLokClientHelper: Version: 3.1 Support
        RealPlayer Plugin: Version: (null) Support
        AmazonMP3DownloaderPlugin101749: Version: Unknown
        iPhotoPhotocast: Version: 6.0
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.2
    3rd Party Preference Panes: ?
        DigidesignMbox2  Support
        Digidesign Mbox 2 Pro  Support
        Flash Player  Support
        Flip4Mac WMV  Support
        GlimmerBlocker  Support
        Growl  Support
        MAudioOzone  Support
    Time Machine: ?
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ?
             3%    activitymonitord
             2%    WindowServer
             1%    ps
             0%    fontd
             0%    firefox
    Top Processes by Memory: ?
        238 MB    firefox
        70 MB    Dropbox
        59 MB    WindowServer
        59 MB    GlimmerBlocker
        53 MB    WebProcess
    Virtual Memory Information: ?
        875 MB    Free RAM
        705 MB    Active RAM
        277 MB    Inactive RAM
        190 MB    Wired RAM
        229 MB    Page-ins
        0 B    Page-outs

    AdrianZag wrote:
    Now you have me worried, has CleanMyMac done 'damage' to my system?
    And is an unistall AND a reinstallation of Snow Leopard really necessary?
    I cannot say with certainty.  I would make certain that your data is backed up, erase the HDD,  install the OSX and then upgrade it to 10.6.8.  Then install the user data.  Any problems that may have been resident should be gone.
    RAM upgrade issue: I researched via the Apple site if my particualr MBPro could have extra memory installed. After much online reserach, it was inconclusive - so I called Apple up and a techie told me that my model was one of the last that couldn't have RAM added.  Are you sure he was incorrect?  Obviously adding 1GB would indeed make a huge difference.
    Do be suspicious and challenge advice you receive on these and any other forums.  Mistakes can be made and I have to admit I have done so, but not too often.    I have witnessed bad advice but I have never thought it was offered deliberately.
    Regarding RAM, you have been misinformed.  Your MBP will accept 3 GB RAM.  Look at these two links, one for OWC and the other Crucial:
    http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/
    http://www.crucial.com/usa/en/compatible-memory-for/Apple/macbook-pro-2*33ghz-in tel-core-2-duo-(17-inch)
    Read them carefully and you will see that both corroborate my position.
    Ciao.

Maybe you are looking for