RAM type to be installed in a B&W G3

Hi all.
First of all excuse my english as I'm a french user, I used to work on macs for many years (my very first computer was the power mac 6200 sold in bundle with a printer years ago by apple, this machine I spent all my university free time on it!)
Here is my question : A friend of mine gave me few days ago his old blue and white G3... everything in it : HD, SCSI card, Video card...but memory less...
I would like to know what kind of Memory I can buy to install in it as the SDRAM PC100 is no more available. the oldest available to me are DDR 266 PC2100. Will these work, or any newer (PC3200..) ? and can I put only a single 1Go, or do I have to put 2 of them of 512 Mo ?
I would like to update it with a 10.3 panther system, will it be ok?
Well, any advise would be gratefull! thank you all in advance for your assistance.

the oldest available to me are DDR 266 PC2100. Will these work, or any newer (PC3200..) ? and can I put only a single 1Go, or do I have to put 2 of them of 512 Mo ?
No, DDR memory will NOT work.
You must use PC100 or PC133 memories, and they may be no larger than 256 MB each DIMM. If you use PC133 memories, they must be able to also run at PC100 speeds. The special ROM chips on each DIMM must be programmed correctly.
There are many different memory parameters that are important. You need to:
A) become an expert on all of these different parameters. -OR-
B) purchase memory from someone who IS an expert on memory for this Macintosh.
• Do not buy memory from a department store or an electronics store. Buy only from someone who sells memory for Macintosh.
• You should tell the seller what Macintosh you have, and the seller should send you the correct memory for your Macintosh, AND guarantee that it will work in your Macintosh or he will refund your money. (This encourages the seller to send you the right memory the first time.)
• The seller should guarantee that the memory will continue to work for a very long time, or he will exchange it for a new DIMM. (This encourages the seller to send you only high-quality memory.)

Similar Messages

My T61 only have 3GB usable ram, but I have installed Windows 8 pro 64-bit and two of 2GB rams

It was working fine with 4GB ram when it was installed Windows 7 64-bit. Is there any drivers I should download?

Hello,
Just to verify, when you view System Properties (WinKey+X and select System from the popup menu) it shows a "64-bit operating system, x64-based processor" in the System Type: field?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uni

Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?

I think you'd be much better off asking in the Acrobar forum, Acrobat

I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?

i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?

Yes, you can install 16GB in your new macbook pro.
Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
Good luck.

Does ram NEED to be installed in pairs

Hey guys, just purchased my Mac Pro about a week ago and I was looking to upgrade my ram. I ordered a 2 gig stick and it arrived yesterday but it won't install. I remember reading ram needed to be installed in pairs but I wasn't sure how true that was. Can anyone shed some light on this?
Thanks

http://docs.info.apple.com/article.html?artnum=304492
http://www.apple.com/macpro/expansion.html
http://manuals.info.apple.com/en/MacProMemoryDIMMDIY.pdf

Valid instance type for this instalation optiion are SCS, ER2, j2eedi, J2

Hello . I want to install a NW7.3 based BI system. I found reccomendation to start with ABAP instance an then start of Java central server installation
However I have checked option BI Java and additionaly I had EP, AS, EPC, and BASIC.
however on next screen I am asked about SAP system ID(I entered the ABAP installed one i.e. BI4)
However this gets recognized that BI4 is already existing after ABAP.
SAP system BI4 exists and is not suitable for this installation option. DIAGNOS: Valid instance type for this instalation optiion are SCS, ER2, j2eedi, J2eeci , but instance ASCS01 has different type
Solution: Choose a different SAP system ID or unistall the existing one
What to do?
Thank you in advace for help

Hello
Now when I have suceesfully installed both (java @abap systems) I wander how to connect them.
I red somewhere I should establish a JCO connection but I wander where
I found new netweawer administrator http://<host>:5<sysnr>00
JCO can be established via http://<host>:5<sysnr>00->configuration->infrastructure->JCO RFC provider.
But which programID to use and..
Is there somewhere some guide how to build BI out of this 2 (java @abap) systems. I only during java instalation entered users to get user communication between java@abap
Thank you in advance

NI Kontakt 3.5 Update: Use as much RAM as you have installed

Just got this e-mail and I know many people use samples. It's not about Logic, but you can use it with Logic.
KONTAKT has now reached version 3.5, adding several new
features and many optimizations. The new version delivers
64-bit capability for PC, while the newly-created Memory
Server for MAC bypasses the OS X's 4 GB limit and can
address as much RAM as you have installed - even in 32-bit
hosts such as Logic or Pro Tools.
KONTAKT 3.5 also offers improved performance thanks to a
revised sampling and DFD engine plus full compatibility
with the latest version of Pro Tools. KONTAKT 3.5 is now
truly the most advanced software sampler on the market.
Feature details:
http://www.native-instruments.com/kontakt35.info
Enjoy
~trevor

Good to see this update although I'd still like Logic to support the extended ram with ALL plugins instead of having to wait for each individual developer to do this hack.

Type 1 fonts installed in windows 7 are unavailable in CS5

I'm using Windows 7 with Creative Suite Production Premium CS5.
My company recently updated the fonts in use on our website which we puchased and installed on our machines. The fonts are Type 1 fonts and as far as I can tell have been installed correctly with both components of the fonts being installed in the directory. The fonts are available in all other applications but Creative Suite. Both recomended methods of font installation have been tried to solve the problem. (Right click "install" and drag/drop .pfb/.pfm files to font directory) Other font types I have installed have worked fine in CS5.
Adobe help chat and Call In Customer support weren't able or willing to offer any help or support.
Can anyone help resolve this?
Thanks
Kristopher

You don't need .inf files for the .pfm/.pfb files combination to work properly in Windows 7. In fact, .inf files are not used in any way by Windows 7 Type 1 font handling.
I have plenty of Type 1 fonts installed in Windows 7 64-bit without any problems and certainly no .inf files. The normal means of installing Type 1 fonts in this environment is to navigate to the directory containing the .pfm/.pfb file pairs and right click on the icon(s) representing the .pfm files. You have a choice of either Install or Install as Shortcut. In the former case, Windows copies both the .pfm and the corresponding .pfb files to the Windows\fonts directory and makes the appropriate registry entries to effectively install the fonts. In the latter case, only a linkage is made to these files and the equivalent registry entries are made.
Perhaps the OP is not running with Administrator privileges or has registry problems on their system.
- Dov

Maximum amount of ram that can be installed

What is the maximum amount of ram that can be installed in MAC Book?

MacBook (Mid 2006) (Model ID 1,1): 2GB
MacBook (Late 2006) (Model ID 2,1): 3GB
MacBook (Mid 2007) (Model ID 2,1): 3GB
MacBook (Late 2007) (Model ID 3,1): 6GB
MacBook (Early 2008) (Model ID 4,1): 6GB
MacBook (Late 2008) (Model ID 4,1): 6GB
MacBook (Aluminium Late 2008) (Model ID 5,1): 8GB
MacBook (Early 2009) (Model ID 5,2): 6GB
MacBook (Mid 2009) (Model ID 5,2): 6GB
MacBook (Late 2009) (Model ID 6,1): 8GB
MacBook (Mid 2010) (Model ID 7,1): 16GB
Cheers,
Adam

How to find the of Oracle software types and versions installed

Hi,
How to find the of Oracle software types and versions installed on RedHat Linux AS machine and Sunsolaris10 machine?
Regards,
Mathew

I'm not sure about your point.
You can use "opatch" command-line
cd $ORACLE_HOME/OPatch
./opatch lsinventory -detail
PRODUCT NAME VERSION
============ =======
Advanced Queueing (AQ) API Patch 10.1.0.4.0
Advanced Queueing (AQ) API 10.1.0.2.0
Advanced Replication Patch 10.1.0.4.0
Advanced Replication 10.1.0.2.0
Agent Required Support Files Patch 10.1.0.4.0
Agent Required Support Files 10.1.0.2.0
Assistant Common Files Patch 10.1.0.4.0
Assistant Common Files 10.1.0.2.0
Authentication and Encryption Patch 10.1.0.4.0

RAM type, size and speed

Hi,
I have Pavillion dv6130us . Looking for RAM upgrade. Can I install pc2-6400 instead of pc2-5300 on this machine? .. What is the maximum size of RAM I can use on this machine?
Any help will be appreciated.
Thank You

HI,
touchworks wrote:
Hi,
I have Pavillion dv6130us . Looking for RAM upgrade. Can I install pc2-6400 instead of pc2-5300 on this machine? .. What is the maximum size of RAM I can use on this machine?
Any help will be appreciated.
Thank You
Crucial Ram upgrade
Can I install pc2-6400 instead of pc2-5300 on this machine? No. The BIOS is set to accept only PC5300.
2GB maximum DDR2 memory
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

RAM type to be installed in a B&W G3

Similar Messages

Maybe you are looking for