Ram ugrade for compaq c700 ku150ea

i have presario c700 ku150ea laptop,i had 4 gb ram 2x2,there are 2 slots in laptop, when i put it, they doesnt work.... please help me

Hi,
Based on the following link, it can only handle 2Gb (1 + 1) max.
  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Presario+C700+Series/Presario+C700+CTO-upgrades.ht...
and here is your machine from HP:
  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Need Windows 7 WiFi driver for Compaq nx7010

    Were can i get Windows 7 WiFi driver for Compaq nx 7010

    Curt try here.
    http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=6&Level=5&Conn=4&DownTy...
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Compaq C700 Notebook Earphone jack pinout

    I need the Pinout of the Earphone or Mic Jack (they're interchangeable) for an HP G7000 or Compaq C700 Notebook.
    I'm repairing a C700 series (C714NR) that is suffering with punk rock damage. The Earphone jack is thoroughly gutted and it's shell shattered. Can anyone give me a part number or the Pin-Out of the earphone or mic jack (interchangeable) that was used in the Compaq C700 / HP G7000 series?  Any help would be GREATLY appreciated. Thank You.

  • Compaq C700 cooling fan's part number?

    Hi
    I wonder if the cooling fan 438528-001 can be used on Compaq C700?
    It does not show Compaq C700 is compatible with it on hp.com
    But when I searched on ebay, many compaq c7800 cooling fans for sale have part number 438528-001:
    http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=compaq+c700+fan&_sacat=See-All-Categor...
    FYI on C700's service manual, the part number is 454944-001.
    Could anyone pls clarify?
    Thanks.

    I had one of these units. It was a great machine but it was LOUD. The reason behind this was that the fans basically had one speed... FAST AND LOUD.
    The latter units had variable speed fans and were a little more quieter.
    It bothered me so much that I rigged the unit so the fans would only run at half the speed. It was useless though as the machine got pretty hot. Maybe if it was in an a/c data center it would be different.

  • Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

    Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

    Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
    Here is a page from CPU-World that gives the specs for your processor:
    http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
    You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

  • How much RAM needed for the DB box

    Hi,
    Can someone share with me the technical way to do calculation of how much of RAM needed for a new Linux box with estimation of 500 users. I hope this calculation can also allow me to breakdown how much MEMORY needed for each session.
    Please recommend any site that I can refer to if any. TQ.

    My project start with Oracle 9i R2 (9206) on Linux (not yet confirm on the platform and etc). Just assume I will use Linux Red Hat Adv Sever latest version.
    Hence how many GB of memory for the box is sufficient to handle 500 connections. Pls guide me the formula to derive the calculation. TQ

  • Is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009?

    My questions is essentially, is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009? I'm aware there are two RAM slots in my machine, but in past experiences with other laptops/desktop computers (not Apple) there was a default maximum which couldn't be overidden despite how much RAM was inserted.

    You can upgrade up to 8GB using 2 x 4GB 204-pin PC3-8500 (1066 MHz) DDR3 modules. That's the maximum (unlike 2011 and later models which Apple tells you can only hold 8GB but can actually run 16GB).
    If you do order RAM, order from a Mac memory specialist - Crucial, OWC, Corsair, etc.
    Good luck,
    Clinton

  • Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

    Hi All,
    Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
    u01/app/oracle/product/9.2.0/install/make.log
    - Linking Oracle
    rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
    cc  -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
    ld:
    load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
    Stop.
    *** Exit 1
    While checked the memory details in the machine its showing plenty of free virtual memory.
    # ps aux
    USER PID %CPU %MEM   VSZ  RSS TTY      S STARTED         TIME COMMAND
    oracle     1353 0.6 27.2  601M 555M pts/2    S N  09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
    root       3033 0.0  0.4 10.4M 7.7M pts/0    R  + 10:59:44 0:00.06 ps aux
    oracle     1351 0.0  0.0 2.46M 320K pts/2    I N  09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
    oracle     1277 0.0  0.0 2.48M 312K pts/2    I  + 09:02:44 0:00.04 -ksh (ksh)
    root       1269 0.0  0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
    root       1268 0.0  0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
    root 1  0.0  0.0  608K  96K ?? IL   08:45:31     0:00.08 /sbin/init -a
    root 0  0.0  3.9 2.52G  79M ?? R <  08:45:31     0:23.16 [kernel idle]
    And I have rebooted the machine still also getting the same error.
    Is there any way to resolve this issue??
    Regards
    prasanta

    Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
    HTH
    Srini

  • Best RAM configuration for Macbook (mid 2007)

    Hi, I have a Macbook (mid 2007) with 1 GB ram and I would like to upgrade. Currently I have 2x512MB, so both of my memory slots are taken. Is it a good idea to have one 512MB card and a 2GB card in the other slot? Otherwise, what is the best RAM configuration for a mid 2007 macbook?
    I am also looking into purchasing this memory card for my macbook, is this a good choice?
    http://www.amazon.com/Crucial-2x1GB-200-Pin-667Mhz-SODIMM/dp/B000FQ2JLW/ref=sr_1 _3?ie=UTF8&qid=1307335802&sr=8-3
    Any advice would be very much appreciated!

    Kappy wrote:
    In  these early models, Ronda, the benefit is very marginal.
    Yes, I read the figure 128 in regards to the benefit. Something about interleaving, maybe?
    In doing a Google search for that article I saw, I found this:
    http://www.mac-forums.com/forums/apple-notebooks/99215-4gb-ram-my-macbook.html
    the maximum amount of RAM your laptop can take is 3.3GB. So while you can physically insert 4GB of RAM, OS X will only be able to see 3.3GB of it.
    But I don't know how knowledgeable that poster is who says it can utilize 3.3 GB. I do know that the full 4 GB shows up in the System Profiler on my MacBook Core 2 Duo 2.16 GHz.

  • Is 4gb RAM enough for os x mavericks?

    I am on a limited budget and thinking of getting a macbook air 13 inch base model and wanted to know if 4gb ram is ok or does it run like crap.

    Are the RAM requirements for Mavericks significantly greater than that  for Mountain Lion?  If not, than I can probably upgrade to Mavericks (strange name this. Sounds like some sort of nightcap) with the RAM I have.
    My mid-2007 iMac can't be upgraded above its current 4GB - as far as I know.  It is working fine with ML as long as I don't have too many apps open.  I can still have three or four open at the moment depending on what they do and, interestingly, the pedigree of the company that originated the software.  By that I mean if the originator a Mac only developer (possibly with PC as a secondary line) I experience no problems.
    If the originator of the software is basically a PC developer with Macs catered for mainly as an afterthought I find apps from these developers tend to take up most, if not all, the available RAM I have even when nothing else is booted.  Stereomerger.app is a good example of this.

  • Where can I find a 16gb or 32 gb ram upgrade for my 13" Mid-2012 Macbook Pro?

    I bought a 8gb ram upgrade for my macbook pro and it isnt getting the job done (I'm trying to run Protools 10).
    Where can I find a 16gb or 32 gb upgrade that is compatible with my macbook?
    I'm currently running:
    Macbook Pro
    13" Mid-2012
    2.5 GHz Intel Core i5

    Crucial RAM for the 2012 MBP is around $129 at NewEgg and Amazon for 16GB.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148609

  • Is 2 gig of ram enough for a 2011 2,3 ghz mac mini for doing some games? Like GTA IV

    Is the standard 2GB of ram enough for a 2011 2,3GHz Mac Mini for doing games? Like GTA IV.
    Or do I even have to go for the faster 2,5GHz model?

    I have a MacMini Late 2011 with 2.3 GHz I5 and 4GB RAM and I use it as media center... It's enough to play FullHD movies but it uses 256 on 512 MB of (shared)RAM... I don't think that you can use a mini for hard gaming...
    But AngryBirds Space on a 60" FullHD TV looks great
    edit:
    welcome to discussions... i'm a newbie too

  • Is there Tux 7.1 for Compaq Tru64 Unix 5.1 version

    Help!
    please tell me if there is Tux 7.1 for Compaq Tru64 Unix 5.1 version.
    send it to my email: mailto:[email protected]
    Thanks.

    I encountered matching problem while trying to use Tuxedo 6.5 from the
    original installation package. The best match for Compaq Tru64 UNIX 5.1
    from the available platforms on the cd was "Digital Unix 4.0d on DEC
    Alpha".
    However the simpapp failed to shut down, just like Yshyang has written
    below. After contacting BEA support, the support personnel asked if a
    patch has been applied (check if a $TUXDIR/udataobj/patchlev file
    exists). It didn't.
    The Tuxedo 6.x platform data sheet at
    http://www.bea.com/products/tuxedo/platforms_6.shtml
    shows that Tru64 UNIX 5.1 is supported, if Tru64 UNIX 4.0b binaries with
    patch level 160+ are used.
    We got a separate patch for the 4.0b binaries, but working Tuxedo 6.5
    installation binaries for Tru64 UNIX 5.0 are available for download at
    BEA web site.
    Juha Laitinen
    Yshyang wrote:
    I install Tux 7.1 in Tru65 Unix 5.1 and TruCluster Server 5.1
    when i configure simpapp.
    tmboot is ok,but tmshutdown can't work,the error is :
    CMDTUX_CAT:766:ERROR:must run on master node
    (In act I run in master node really,I have checked by uname -n).
    the other bizarrerie:
    tmadmin
    display :
    TMADMIN_CAT 202:ERROR:Can't find DBBL in master node or backup node.
    (In act my simpapp ubbconfig is:MODEL=SHM)
    maybe there is bug I guest.
    If it need some patch in the env.
    "Marcin Kasperski" <[email protected]> wrote in message
    news:[email protected]..
    yshyang wrote:
    Help!
    please tell me if there is Tux 7.1 for Compaq Tru64 Unix 5.1 version.
    The version for 'Digital Unix 4.0 sth' seems to be working on 5.1.

  • When I try to open large files that i have created (1.2 gb to 1.5 gb) the ram usage for Photoshop climbs to 4 gb and the file will not open.

    I am using PS 12.1 x64 on a Windows 7 64 bit pc.when I try to open large files that i have created (1.2 gb to 1.5 gb) the ram usage for Photoshop climbs to 4 gb and the file will not open

    Machine specs, please.  Totallinstalled RAM, scratch disk space, etc
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Looking for graphics adapter driver for Presario c700 video

    Looking for graphics adapter driver for Presario c700 video

    Please read the XP Downgrade Guide at the link below:
    http://h30434.www3.hp.com/t5/Notebook-Operating-sy​stems-and/General-XP-Downgrade-Guide-for-HP-Laptop​...
    The guidance for installing XP on your model series can be found under the section labeled 2. Moderate Models.

Maybe you are looking for

  • Simply delete all entries in a database.

    Hello, how do I simply delete all entries in a database (which must be thread safe, and most probably is)? For instance it is needed, as I'm developing a versioned open source XML/JSON database system, whereas I'm using a BerkeleyDB environment/datab

  • Purchase Default Settings

    Dear All               In the Create Purchase Order Screen, when i enter the Material, then by default i should get the: >Purchase Org., >Pur. Group, >Company Code And the >Vendor                 for the material entered. How to achieve this!!! Regar

  • Exporting to rtf issues

    i have a file that has tons of tables and when i export from indesign to rtf, a return is added at the end of every cell. how can i keep it from doing that?

  • Launching a VI Dynamically

    I'm attempting to launch a VI dynamically using VI server. The VI works fine when used within the LabVIEW developement environment (LV2010sp1) but throws an error 7 when built as an executable. I've included the VI to be launched within the "Always I

  • Print and open loop

    Hi programmers I have a list of images in this format ( ARCHIVAL\RASTER\TBB008\TB-P&S\image1.pdf, ARCHIVAL\RASTER\TBB008\TB-P&S\image2.pdf, ARCHIVAL\RASTER\TBB008\TB-P&S\image3.pdf ...etc) I like to print all of them at once, and also I want them ope