RAM Upgrade for 17" MacBook Pro (2.4 GHz, Core 2 Duo)

I am looking to upgrade and max out the RAM slots on my 17" MacBook Pro (2.4 GHz, Core 2 Duo). Will the CORSAIR 4 GB (2 x 2 GB) DDR 667 (PC2 5300)? The item I am looking at can be found here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2153340551%201328023 882%201327924738%201328123897&name=DDR2%20667%20%28PC2%205300%29.
Thanks!

Here's a better deal than NewEgg.
http://dealmac.com/Corsair-4-GB-2-x2-GB-PC2-5300-Laptop-RAM-Kit-for-20-after-reb ate-6-s-h/262711.html

Similar Messages

Internal hard drive upgrade for 15" MacBook Pro (2.4 GHz Core 2 Duo) late 2008.

I need to upgrade my internal hard drive to something larger (it is currently 250 gb). What hard drive will be compatabile? I will really appreciate any help with this. Thank you!
Specifications:
Model Name:
MacBook Pro
Model Identifier:
MacBookPro5,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
2 GB
Bus Speed:
1.07 GHz

The largest HDD that can be installed in a MBP has a 1 Tb capacity. I suggest you go to the OWC website and examine the choices available there. Any of the 2.5" HDDs will work. They cater specifically to the Mac market and and have an excellent reputation.
Ciao.

Hard Drive Upgrade on 17" MacBook Pro, 2.4 GHz Core 2 Duo

I have a 17" MacBook Pro, 2.4 GHz Core 2 Duo, with a 160 GB hard drive. I am looking to upgrade the hard drive. Will a WD Scorpio Black, 320 GB SATA, notebook hard drive fit into my MacBook Pro?

Hi MJMP1: You aren't really missing any Hard Drive space, check out this Apple article for more info.
http://support.apple.com/kb/TS2419?viewlocale=en_US
Stedman

Stock RAM Configuration for 15" MacBook Pro 2.4GHz Intel Core 2 Duo

Hello,
I have a new 15" MacBook Pro 2.4GHz Intel Core 2 Duo on it's way to me and I need to order a RAM upgrade. I know the specifications of what I need, but am getting conflicting information from the retailer on how the stock models are configured for RAM. The total amount is 2GHz. Does anyone know if this amount is provided by one or two RAM modules?
"Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
Dr. Z.
Message was edited by: Dr. Z.
Message was edited by: Dr. Z.

You'll find the RAM is in a 2 x 1GB configuration. Unfortunately they both need to come out for you to upgrade to 4GB RAM in a 2 x 2GB configuration. Still cheaper than going with Apple which makes it a little softer.

What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?

Hello
I have a macbook pro 2.33 ghz intel core 2 duo with
2 GB 667 MHZ DDR2 SDRAM
What is the RAM limit i can install? 3GB or 4GB?, how do i know that? I dont have the manual.
thank you
Leo.

What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?
3GB. You can install 4GB. The computer will only utilize approximately 3.3GB though.
http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2 .33-15-specs.html
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo without the original CD?

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo with snow leopard without the original CD?

Hi,
apart from the MacBook Air this feature is of no use for other Macs right now.
Simply ingnore it (click "I already have the Drivers...) and continue with the installation.
Sorry to say but you need the OSX Install DVD for the BootCamp Driver installation.
The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
Later updates (3.1 and 3.2) can be downloaded from Apples Support website.
Call Apple and ask for a replacement and they usually send you one for a small fee.
And have the Serial-Number of your Mac at hand when calling.
And since the OSX Install DVD can also be vital for maintenance and repair it is best to have one.
The needed BootCamp Drivers are on the OSX Install DVD 1 that came with your Mac.
Insert that disc while in Windows after the Windows installation to install the drivers.
Regards
Stefan

Macbook Pro 2.2 GHz Core 2 Duo initiates spontaneous start up from shut down

Peculiar behavior from a "new to me" Macbook Pro 2.2 GHz Core 2 Duo . Having purchased this from a local chap , I have begun to personalise the device , naturally . I have come across this profoundly unreasonable behavior , if it can be called anything a "Spontanious Start Up" will do for now . Occurring after employing a software shutdown , being previously removed from a power source , this has now twice resulted in indirectly observing that the computer spontaniously started up while I was away from it . This is about the extent of individualistic behavior exercised by the device that I am aware of in its less than one week of welcome into the house .
There is a cat whose legerdemain lies in eating , sleeping , biting , shedding fur , and occasionally reminding mice who is the predator . Smokies interests though vital have not been , aside from attractively swinging , feckless wires , directed towards learning about computers .
If there is an explanation I would certainly be edified in entertaining a cause as none , practically , are apparent to me . Aside from evil malware commanding the computer to do its bidding I have no plausible idea .
That this seems quite contrary to ordinary domestic electronic device behaviors , with no results in an identical google search . This issue strikes me as presenting a possible unfriendly , specifically unwanted , idiosyncracies .
Thank you for taking the time to read this . FRP

It might deteriorate until the button doesn't work at all, or it might not. It will just be annoying in the mean time.
As far as the console logs go, I've never been able to identify this particular issue by trawling through them. And I think the reason for that is that it just logs it as Power On / Shutdown.
Aside from that there really isn't anything I can think of that would help you diagnose this problem further.

RAM upgrade for 2010 Macbook Pro

I have the 13" Macbook Pro 2010 unibody model which I bought in May 2010. It has 4GB RAM installed when I bought it. I purchased two (4GB) RAM DDR3 204pin 1333Mhz. Will this be compatible? I want to upgrage the RAM to 8GB.

Hey boss I checked MacTracker and for the Early 2010 13" MBP (your model) it showed these specs:
2.0 or 4.0 GB PC3-8500 (1066 MHz) DDR3 SO-DIMMs
Max RAM 8.0 GB
For the late 2010 13" MBP it showed these specs:
2.0 or 4.0 GB PC3-8500 (1066 MHz) DDR3 SO-DIMMs
Max RAM 4.0 GB
To answer your question no you cannot install that memory you mentioned. It could cause damage to both the memory and to your macbook pro.
Download MacTracker it is a free app that shows specs for almost every Apple device made.
I hope this has helped you.

RAM Upgrade for Mid-2010 MBP 2.8 GHz Core i7

I ordered an 8 GB Memory upgrade kit from OWC. When I install the memory, the screen remains blank and I get 3 long tones, 3 short tones and 3 long tones. Article HT2538 says that should be a Firmware restoration from CD in process, but that's not the case. Software Update says everything is at the latest level. Bad Ram, or wrong specs the more likely culprit? What about Firmware?
Both the current system settings and the label on the new ram says DDR3 PC8500 1066MHz

Update: OWC Tech Support responded to try and clean the RAM contacts witha pencil eraser. This work for one module, but not the other. I will be returning the defective module.
Additionally, I was incorrect about the error code. The system replies with 3 short tones, 3 long tones, 3 short tones. This is opposite of the "Firmware upgrade" code I thought I was getting. I have not been able to ID this code (The RAM failed checksum code is just 3 short tones, not this sequence)

I cannot load Lion for my macbook pro - it needs a core 2etc

i cannot buy Lion for my macbook pro - it needs a core 2, Duo, Core i3, Corei5, Corei7, or Xeon processor!! now what!
What do I need to do?

laundry bleach wrote:
applefandan -
I have seen reports of people who have replaced the processor - putting a core 2 duo where there was a core cuo - and Lion still will not work. Be cautious about doing this.
Best of luck.
Oh thank you I was unaware of this. Yes please be cautius if you intend to replace your processor.

Is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009?

My questions is essentially, is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009? I'm aware there are two RAM slots in my machine, but in past experiences with other laptops/desktop computers (not Apple) there was a default maximum which couldn't be overidden despite how much RAM was inserted.

You can upgrade up to 8GB using 2 x 4GB 204-pin PC3-8500 (1066 MHz) DDR3 modules. That's the maximum (unlike 2011 and later models which Apple tells you can only hold 8GB but can actually run 16GB).
If you do order RAM, order from a Mac memory specialist - Crucial, OWC, Corsair, etc.
Good luck,
Clinton

Purchase RAM for Macbook Pro 2.26GHz Intel Core 2 Duo Mid-2009

Hello,
I need to upgrade the current memory(2 GB) of my Macbook pro (2.26GHz Intel Core 2 Duo Mid-2009) model..Can someone please suggest where I could purchase and what is the maximum and optimal that I could buy.
Also I reside in India, so should I get it online or from the apple store which is like 100 km (nearest) from my place .
Thanks
Shubham

You can buy them oniine if you wish to do so. Buying it from Apple is a good idea but would cost more, and since it's 100km away, after your gas = more money.
The maximum you can install is 8GB. Your RAM specs are 1333MHz - DDR3 - 204PIN SODIMM.
Check here for current prices online and compare to the price Apple sells them in your area.
If you're not in a big rush - then buying online is a good idea.
Good luck

Issues with sleep/wake feature after 16GB RAM upgrade in my MacBook Pro. Any thoughts?

Just installed a 16GB RAM upgrade in my MacBook Pro and now it doesn't wake up on it's own when I open the lid. I have to press the power button. It works fine with a smaller RAM upgrade.
I've tried putting in just one of the 8GB modules and the sleep/wake feature works as normal so there isn't a problem with the RAM modules that I've bought (Crucial.com). I've also put in a combination of Apple's original RAM and the new ones to make 10GB (8GB + 2GB), and the sleep/wake feature works on that too. Put both 8GB modules back in and the MacBook doesn't wake up when I open the lid, I have to press the power button to wake it up. The MacBook itself works fine, super fast and the memory is recognised on 'About This Mac', the sleep/wake issue is the only problem I'm having with the 16GB RAM.
Any thoughts on this? Has anybody else had this sleep/wake issue like this when upgrading RAM?

I upgraded my early 2011 MBP to 16 gigs with Crucial. My machine would not sleep properly, because when I tried to wake it, it would wake from its hibernate image file. This is the issue I've seen here in this list.
I tried all the suggestions I saw on these groups. Nothing helped. I contacted Crucial, who suggested that if their RAM was defective, they'd replace it per their warranty process. I needed some proof it was their RAM causing the problem.
I put the original 8 gigs RAM back in the machine (2 4 gig sticks), and it behaved normally. I then put one stick of Crucial RAM in, all by itself. The machine behaved normally. I put the other stick of Crucial RAM back in, and took the first one out. The machine would not properly sleep and wake from sleep. This proved that one stick was causing the problem, and the other was not.
Defective RAM!
I then requested and received an RMA from Crucial to send the defective RAM back. They paid shipping. I got new sticks of RAM about a week later. These new sticks of RAM work properly. No sleep issues.
I'm surprised and disappointed to say that this is not the first time I've received defective RAM from Crucial. I've purchased from them for years, and had GREAT service and received high quality products. The past couple years my experience has been different.
I'm still pretty steamed about this, as I spent a great deal of time trying to diagnose the problem and fix it. I don't really have that kind of time to waste. My expectation was that their RAM was high quality, and unlikely to be at fault.
Perhaps this is just a bad batch of RAM. I get that. I can forgive them once. But this has happened twice in the past three years. I'll look elsewhere for my next memory purchase.
Keep in mind that their customer ratings are generally very high. My experience is probably isolated.

8GB RAM upgrade fails on Macbook Pro even though RAM is ok

I've bought two 4GB RAM sticks for my Macbook Pro (2.4 Intel i5 running 10.6.7) and they failed the Hardware Memory Test. I tested them individually and they passed and I retested my original RAM and it passed. I sent the RAM back and got replacements and the same thing happened. Both sticks in fail... put them in individually, they pass. Has anyone else experienced anything similar?

tbux wrote:
Do you see much performance improvement after the upgrade?
Hi t,
Although that question was asked in reply to my post, I suspect you're asking Paulos42 . . . .
One way to get an idea whether more RAM will help or not, is to check Page outs and Swap used. First, use your Mac as you normally would, the longer the better (checking this right after starting up isn’t likely to show you anything). After you’ve used your Mac for awhile (again, the longer the better), go to Applications > Utilities > open Activity Monitor > in the top menu at right, select All Processes in the drop down menu > near the bottom of the window click on System Memory. If Page outs is more that about 10% of Page ins, and/or Swap used is large, chances are good that adding RAM will help. http://support.apple.com/kb/HT1342

I have new iMac with Lion installed; can I get a free upgrade for my MacBook Pro?

Hello
I recently bought a 27" iMac with Lion installed. Should I be able to download the upgrade for my MacBook Pro without paying. If so what should I do. If I go to the App Store I'll end up paying £20.99
Any help gratefully received
margaret

Margaret,
No you will need to purchase the upgrade. However if you own other Macs you want to upgrade once you have purchased Lion then you can upgrade the additional machines. Of course the additional machines must be using the same Apple ID. As long as the additional machine's meet the minimum system requirements listed below you are all set.
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

RAM Upgrade for 17" MacBook Pro (2.4 GHz, Core 2 Duo)

Similar Messages

Maybe you are looking for