Ram upgrade for imac 7,1

Okay I have an imac that I would like to upgrade the RAM on from 2gig to 4gig. I was wondering if this will RAM will work or not?
G.Skill
F2-5300CL5D-4GBSA
DDRII2GB     PC2-5300
CL5-5-5-15     SO-DIMM
Here is my current system
iMac
iMac7,1
Intel Core 2 Duo
2.4 GHz
1
2
4MB
2 GB
800 MHz
IM71.007A.B03
1.20f4
I have a set of http://www.gskill.com/products.php?index=195 and was wondering if this will work or not. I didn't want to go out and buy new RAM when I received this from work.
Thanks, and I did look into OWC, but figured why pay when my IT guy at work hooked me up with new RAM already.

Visit this link, I have used this memory in various mac and windows computers. If you do not wish to use this manufacture the scanner they provide will still tell you the memory you need.
http://www.crucial.com/uk/systemscanner/MacOS.aspx

Similar Messages

  • Cost/benefit of RAM upgrade for iMac G5 2 GHz from 1.5 to 2.0 GB

    Equipment: iMac 20" 2.0 GHz, 250 GB HD, originally 500 MB RAM upgraded to 1.5 GB: (1) 500 MB and (1) 1 GB DDR SDRAM, PC3200U-30330.
    Not understanding the subtleties of memory upgrades, I bought this off the shelf with 500 MB RAM. When the processor board was replaced, I added a 1 GB RAM and can't say I noticed any change in performance. It does reduce the need for page outs.
    After this, I read something about needing to have the DIMMs matched for there to be a performance gain. Or maybe this related to 64 bit operation? I read elsewhere in the Discussions that 64 bit operation would actually consume more memory and reduce performance.
    If I upgraded to 2.0 GB, would there be any improvement in performance? In general or only in certain situations?
    If I upgrade RAM, I'll have (2) useless 500 MB DIMMs. Is there any value in these? Where is the best place to sell them or do they have value as trade-ins?
    Or is the best use of the money to put towards an Intel Mac that can support 10.6+ ?(...or a share or two of Apple stock.)
    Please convey your wisdom. Thanks.
    P.S. I know the stock is the best use of my money, so just consider the hardware options.

    I happened to find this answer while looking for something else.
    iMac G5 and iMac G5 (Ambient Light Sensor): Benefit of using matching memory modules (RAM) http://support.apple.com/kb/HT2708
    Condensed version:
    Applies only to original iMac G5 and iMac G5 (Ambient Light Sensor).
    *If it has matching DIMMS it operates with a 128-bit data path, otherwise it uses a 64-bit data path.* A 128-bit data path allows greater throughput than a 64-bit data path. This allows faster manipulation of large files. With a 128-bit bus, you would see better performance when you have multiple applications open at the same time. Also, some enhanced gaming performance.
    According to this, I was getting better performance before I added the 1 GB of RAM, except that degraded performance due to stuffing RAM to the gills has to be weighed against that. Seems like trading up to a full 2 GB would have some unquantified benefits. The only ways to find out are to find another iMac to compare with or to put in the RAM and see what happens.

  • Where is the cheapest place to buy 8gb ram upgrade for my early 2009 iMac?

    Where is the cheapest place to buy 8gb ram upgrade for my early 2009 iMac, I have bought before but current upgrade is causing mac to crash randomly!? Need to know a place I can buy Ram which is confirmed to work my my mac model, the current upgrade is working but Mac is very unstable.

    I meant more reasonable priced than apple
    That'll be almost anywhere else then!
    Yes, if it is made by Crucial and confirmed as suitable for your model of mac you will be fine. You can also buy direct from Crucial:
    http://www.crucial.com/eu/?cpe=pd_msn_uk
    which is what I would do (did).

  • Where can I find a 16gb or 32 gb ram upgrade for my 13" Mid-2012 Macbook Pro?

    I bought a 8gb ram upgrade for my macbook pro and it isnt getting the job done (I'm trying to run Protools 10).
    Where can I find a 16gb or 32 gb upgrade that is compatible with my macbook?
    I'm currently running:
    Macbook Pro
    13" Mid-2012
    2.5 GHz Intel Core i5

    Crucial RAM for the 2012 MBP is around $129 at NewEgg and Amazon for 16GB.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148609

  • Ram upgrade for mac Book Pro mid 2009

    Hi, I just bought 2x Kingston 4GB ram upgrades for mid-2009 MacBook Pro. First I don't notice any difference in speed. Second, the computer (in about this mac, activity monitor) doesn't seem to acknowledge it now has 8gb of ram not 4gb. Why would these be so?

    You should be able to install 8GB I would check to make sure it has a secure connection. Maybe one of the RAM sticks is bad, or the port itself is bad.
    13-Inch Mid 2009: http://support.apple.com/kb/sp541
    15-Inch Mid 2009: http://support.apple.com/kb/sp544
    They both state that they can support up to 8GB of RAM.

  • Processor Upgrade for iMac G3

    Hello, I didn't see any particular posts specifically pertaining to the slot loading iMac (Graphite)..I hope someone can help me out.
    I have a G3 Graphite iMac, upgraded RAM currently running Tiger. I used to use it but wiped it clean, re-installied the OS and created a separate account for my 8y/o son, so essentially there aren't many apps on there. For some reason it's running slower than it should, even with just Safari open. Is there a fix or possibly a processor upgrade for this model (I keep seeing that there isn't, but I want to be sure).
    It's either that or constantly hearing my son complain of the lagtime and ask for our laptops instead...

    According to Mactracker at one point there was a 700 MHz model available in Graphite & Snow. If you could find a 700 MHz G3 CRT iMac logic board on eBay it might be possible to upgrade the processor speed. You could also install a Matshita SR-8184 or SR-8186 DVD-ROM drive.
    There's firmware available for both drives that allow them to be flashed to RPC1 or region free meaning they can play DVDs from any region in the world. Normally the drive is restricted to being able to only play Region 3 DVDs from the US. If you order a Matshita SR-8184CD optical drive from www.welovemacs.com call their 800 number listed on their website & be sure to ask for Jessica or Faith since some of the optical drives they sell don't have RPC1 firmware available for them.

  • Hard Drive and RAM upgrades for latest 15" MBP

    I'm minutes from ordering a new MBP. Only concerns are whether I get hte Apple upgrades or shop around.
    I like this Hard Drive...
    http://www.compu2000.com/index.php?l=product_detail&p=6433
    And this RAM upgrade...
    http://www.a-power.com/product-10937-311-4
    If these are equivalent to the apple options I can save hundreds and get a 320 GB drive, which will make a great portable.
    So, does my plan hold water?

    You're on your own for support when you do your own upgrades like this, but generally speaking, it works fine.
    Note that HDD is less risky than RAM. With RAM you run the risk of unstable behavior that is tougher to diagnose. That said, a quality RAM upgrade and some initial testing with any of many available tools is as good as a factory build.
    HDD upgrades are less risky, and I've upgraded (well, replaced after HDD death) ones in my MBPs many many times. I crunch my hard drives more than normal and have to generally replace them about every year. Some of the MBPs don't make this easy, and prepare to get all sorts of cozy with little 0 and 1 sized Phillips screwdrivers and some T6 as well, but it is doable (just not quite for the truly faint of heart).
    Again, you're on your own for support once you do this, so weigh that in your decision.

  • RAM Upgrade for 17" MacBook Pro (2.4 GHz, Core 2 Duo)

    I am looking to upgrade and max out the RAM slots on my 17" MacBook Pro (2.4 GHz, Core 2 Duo). Will the CORSAIR 4 GB (2 x 2 GB) DDR 667 (PC2 5300)? The item I am looking at can be found here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2153340551%201328023 882%201327924738%201328123897&name=DDR2%20667%20%28PC2%205300%29.
    Thanks!

    Here's a better deal than NewEgg.
    http://dealmac.com/Corsair-4-GB-2-x2-GB-PC2-5300-Laptop-RAM-Kit-for-20-after-reb ate-6-s-h/262711.html

  • What's the best quality and cheapest 1GB RAM seller for iMac Intel?

    I am looking to buy a 1GB RAM chip for my iMac Intel. However, this can be very expensive when bought straight from Apple. Where else can I get 1GB of RAM for a cheap price that will give me the quality I am looking for?
    iMac Intel   Mac OS X (10.4.8)   Currently have 512 MB RAM on iMac

    Yes, you can successfully use a single 1Gb module. You can just as well add a second one that isn't matched. However, it should be very easy to match RAM modules without buying the second one from Apple. To be "matched" they must both be same speed, same size, same number of component chips on both sides.
    Size is easy, both 1GB. Speed is easy, both PC2-5300 667MHz. Component chips - little black square or rectangular chips attached to one or both sides of the board. Count the number on each side of the board and duplicate that configuration and the two modules, one from Apple and one from xyz company, will be "matching" RAM. If there are 4 on the front and 4 on the back, buy another like that. If there are 8 on one side, and none on the other, buy another like that.
    Message was edited by: myhighway

  • 802.11n upgrades for iMac & MacBook

    For any who have been waiting for upgrades for older intel machines Quickertek has new user installable 802.11n cards for iMacs & MacBooks.
    http://www.quickertek.com/80211N_upgrade.php
    2 GHz Power PC iMac G5   Mac OS X (10.4.9)  

    This has been said many times, but I'll say it again: Unless you're having them do the installation, the QuickerTek cards are a rip-off. You can save $100 by buying a Mac Pro Airport Extreme Upgrade card for $49. It's the same card that QuickerTek is selling for their MacBook, MacBook Pro, and iMac upgrades, which means they're getting about a 200% markup.

  • Happy to report (Ram upgrade for Mac mini))

    Hello All,
    I would like to share this info with you, just in case someone wanted to add more Ram to their Mac mini.
    I purchased 2X4GB Kingston DDR3 Ram and followed instructions that I found on YouTube and other sources to replac my 2GB Mac mini.
    The Kingston ram is very cheap KVR1066D3S7/4G but you should evaluate how much Ram you will need.
    If I knew that I will only need 4GB then I would have saved my money in a warmer place (my pocket).
    Anyway here is the info of my Mac mini after the RAM upgrade:
    Hardware Overview:
      Model Name:          Mac mini
      Model Identifier:          Macmini3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MM31.0081.B06
      SMC Version (system):          1.35f0

    I'm not sure what your point is here. How does one actually "evaluate" how much RAM you think you need?         I think most would agree that a RAM upgrade is one of the best performance boosters for the money and the simple rule is the more RAM the better. I have a new Mac Mini with 2.3 GHz i5 processors and upgraded to 8GB of RAM from Crucial.com (complete with instructions so you don't have to search YouTube) and noticed an immediate performance increase when working with multiple applications and while playing iTunes, etc. The Crucial upgrade was only $59.99 for 8GB kit and I think the 4GB kit was only $20 cheaper so it doesn't make sense to not get thte 8GB kit.

  • Maximum RAM upgrade for Mac Mini mid-2010?

    Hi,
    I have a Mac Mini mid-2010 (Model 4.1).   I purchased it with 4 Gb RAM, and I am now considering a RAM upgrade. 
    I currently am running OS 10.95 - and not particularly happy with the sluggish performance that has been the hallmark of my 'upgrade' to Mavericks on this machine. I figure that increasing RAM can only help what has become a sometimes teeth-gnashingly slow computer.
    In any case, the Apple tech specs document says that the maximum RAM for this machine is 8 Gb.  However, the macmemory.com web page for this model Mac Mini says it can handle 16 Gb so long as the OS is 10.7 or greater. 
    Is this true?  Anyone tried this?
    Thanks,
    HJ

    Memory capabilities:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • RAM upgrade for MBP 2.2 GHz Intel Core 2 Duo

    I have a MBP 2.2 GHz Intel Core 2 Duo currently with 2 GB of RAM and with all the work I do on it I would like to upgrade to 4 GB. Purchasing the RAM through Apple is out of the question because it so expensive.
    I would like to know what is the best brand to buy and on what website.. Is an upgrade to 4 GB possible for my MBP? It looks like I have my "Bank 0/DIMM0" filled with 1 GB DDR2 SDRAM 667 MHz and my "Bank 1/DIMM1" filled with the same thing. Does this mean that both of my RAM slots are full AND if I want to upgrade my RAM I'll have to purchase 2 sets of 2 GB RAM? Please help as I am new to all of the tech stuff...
    Another side note... I've noticed that some discussions have stated that some MBP are only upgradable to 3 GB of RAM, but I'm pretty sure that I can upgrade mine to 4 GB of RAM. Can anyone shed any light on this?
    Your help is much appreciated...

    yes, both of your RAM slots are full, so to get 4GB you will have to get 2 2GB sticks. Having the same model I can safely assure you that it will recognize all 4GB of the new Ram.
    as for brands, there have been many I have seen recommended on this board, but one name seems to pop up consistently is Kensington, I picked up my ram from the store I bought my laptop at, so I couldn't recommend a site, sorry

  • Ram upgrade for 2010 15" MBP

    What options do have to upgrade the RAM in a 2010 15" MBP?

    Check this link at Crucial.com. They have reliable/compatible RAM upgrades. It appears you can go as high as 8GB.

  • 8GB Ram Upgrade for 27" iMac (Not Quad Core)

    Hey guys, I have an iMac 27", not the quad core though. I want to know, what is the best UK retailer to buy 8GB of Ram for my iMac. I have 4GB at the moment, and I want to run FCP, and After Effects more efficiently, speed up Render time etc.
    Where can I buy some from a shop that could be found in the Trafford Centre, so Curries/PC World , The Apple Shop, Selfridges, etc.
    Any ideas about how much it would cost?
    Also how much more would 16GB of RAM be?
    Is it easy to install?
    Thanks guys
    -Bob

    Surf to http://eshop.macsales.com/shop/apple/memory/iMac and find the correct memory for your iMac.
    OWC ships worldwide.
    Good prices. Not the lowest, but their service is worth it.

Maybe you are looking for

  • How to avoid multiple copies of the same application in Web Start cache?

    We have an environment where there are several HTTP servers carrying the same Web Start application. Is there any way to prevent Web Start from installing another copy of the same application in a client machine's cache if the user hits an HTTP serve

  • Sum 2 columns in alv report (not separately)

    Hi, I have an alv report and I use do_sum = 'X' in order to sum separately 2 columns. The demand here is that at the end of the report there will also be a total of the 2 columns together. I tried to implement it but so far - no success. Mayby someon

  • ABAP QUERY - Adding a new field in the output

    Hello , I am creating a ABAP query in which i need to do a calculation and display it in the output. How do i do it? I have added the field PLAF-GSMNG and PLAF-AVMNG in the infoset. The calculation that i have to do is CALCULATEFIELDS = PLAF-GSMNG -

  • I want javax.mail package

    Hi all, Please tell me the location where I need to download the javax.mail package. Thanks Anand

  • How do I put a scale on an image display window?

    I am using a frame grabber and displaying an image. Is there any way I can put to left and bottom of the display like a axis or scale (I dont really know what to call it) that shows the pixel numbers along the x and y axis?