RAM upgrade on HP EliteBook 8730w

Hi, I just bought two new hynix 4GB SODIMMs (4GB 2Rx8 PC2-6400S-666-12) and tried to install them into my laptop without luck. The computer starts with black screen and after a second or two the numlock and caps lock indicator LEDs starts to flash in blocks of three. The computer won't boot past this. From what I can gather 8GB RAM upgrade is possible and the mentioned RAM should be the correct one. Could either or both RAM sticks be faulty? Any help is greatly appreciated!

Hi,
Generally, it's best to upgrade memory with matching modules so a suitable upgrade can be seen on the following link.
http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv6-3225dx&Cat=RAM
If your notebook already has 1 x 4Gb Module and you just wish to purchase an additional one, use an application such as CPU-Z to match the specifications to your existing memory ( check the Memory and Spd tabs ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Elitebook 9470m shuts down after Ram Upgrade

Hey guys
I bought 2 Kingston 8GB Ram for my HP Elitebook Folio 9470m (Windows 8 Pro) to upgrade it from 8GB to 16GB. According to Kingstons' "Memory Search" the RAM I bought should work with my laptop:
8GB Module - DDR3 1600MHz
Artikelnummer: KTH-X3C/8G
Herst.-Artikelnummer: 689374-001; B4U40AA; H2P65AA
Techn. Daten: DDR3, 1600MHz, Non-ECC, CL11, 1.5V, Unbuffered, SODIMM, 204-pin
I installed the two Kingston Rams and removed the one from HP because I read that the ram should be from the same brand.
After the proper installation of the two Rams the Laptop shuts down during startup or the repair modus comes up with no result.
If I install the HP Ram and one Kingston Ram, everything works fine, but i can't install both Kingston rams without the mentioned problem. Why?? :-)
Thanks in advance for your help guys!
This question was solved.
View Solution.

Yes it should work. I checked the Kingston site and this memory is specifically recommended for your model. I would try each Kingston module separately with the HP module and run a memtest extended test on it.
http://memtest86.com/download.htm
Make a bootable cd or usb stick with memtest and run it on each module. I suspect you got a bad stick of RAM. At the least if it does not work Kingston is very reputable and they will refund your money. Here is the memory suggested by Crucial:
http://www.crucial.com/search/searchresults.aspx?keywords=Elitebook%209470m
If this is the Answer you need, please click Accept as Solution so that others can find it down the road.

HP elitebook 8730w FN778AV upgrade

I have an ELITEBOOK 8730w. Is it possible and useful to upgrade its Q9300 processor and/or its graphic card?

Hi,
The following link shows supported CPU's and also a list of GPU's supported:
https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/05/FN778AV.htm
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??

What memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??
Max RAM? Vista? Windows 7?

I can't find a dv5-1198de but I did find a dv5-1198er which should be similiar. It states up to 8 gb of ram. HERE
I would try www.Crucial.com for suggested memory ,you can use their Scanner Tool to let it detect what you have and what you can upgrade/replace with.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

RAM upgrade on Satellite L300-20D

I was wondering if the laptop L300 - 20D.
Can get a ram upgrade. It has 1024 MB RAM 800MHZ. And i need 1500 MB .

Your notebooks RAM can be upgraded up to 4 GB.
For upgrade you can use follow RAM modules:
512MB DDR2-667 - PA3511U-1M51
1GB DDR2-667 - PA3512U-1M1G
1GB DDR2-800 - PA3668U-1M1G
2GB DDR2-667 - PA3513U-1M2G
2GB DDR2-800 - PA3669U-1M2G
Bye

MacBook Pro 13' Early 2011: Still Slow After 16GB RAM Upgrade

Hi,
I have a MacBook Pro 13' Early 2011 running Yosemite. After the RAM upgrade to 16GB, the speed of the computer is still not satisfactory, having some lag times in launching softwares and startup. Please suggest me what to do. Below is the report. Thank you!
Problem description:
The computer is still running slow even after the RAM upgrade to 16GB.
EtreCheck version: 2.0.11 (98)
Report generated November 18, 2014 at 5:40:20 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:7:52
Disk Information: ℹ️
ST9320325ASG disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (156.62 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
[not loaded] com.wacom.kext.pentablet (5.3.0 - SDK 10.8) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.wacom.pentablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.rim.BBDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.5r635 Support
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 162.22 GB
Destinations:
LACIE SHARE [Local]
Total size: 350.07 GB
Total number of backups: 5
Oldest backup: 2012-07-17 01:12:57 +0000
Last backup: 2014-03-19 07:05:24 +0000
Size of backup disk: Too small
Backup size 350.07 GB < (Disk used 162.22 GB X 3)
Top Processes by CPU: ℹ️
      9% mds
      6% WindowServer
      1% BBLaunchAgent
      0% AppleSpell
      0% fontd
Top Processes by Memory: ℹ️
103 MB mds_stores
86 MB Dropbox
86 MB ocspd
69 MB com.apple.WebKit.WebContent
52 MB Safari
Virtual Memory Information: ℹ️
13.07 GB Free RAM
1.71 GB Active RAM
740 MB Inactive RAM
1.66 GB Wired RAM
1.31 GB Page-ins
0 B Page-outs

First go to the RIM web site and look to see if they have an uninstaller for the device you had. Some times a reinstall of the application and then running the uninstaller is required for complete removal.
If no uninstaller is available, then you will have to use Spotlight to find all items with 'Blackberry' and 'Rim' in the titles. I would also download EasyFind and use that to locate such files. Often it will locate items that Spotlight misses.
Ciao.

HP Envy 13 1030nr. Windows 7 64-bit. RAM upgrade help.

I just purchased a RAM upgrade for my Envy 13 and I was trying to figure out how exactly to access the memory module. I couldn't find a youtube video for the Envy 13 and reading the maintenance manual provides only partial instructions to access the memory module. It tells you what you need to do (Disconnect the TouchPad cable 2 from the low insertion force (LIF) connector on the system board) but not how to do it without damaging the computer. I don't want to permanently sever a cable or anything so I'm looking for help via a link to a video or more detailed instructions on exactly how to safely access the memory module.
I was under the impression that this would be a quick replacement, but the more I read the manual, the more I think that this is going to be a little more complicated than opening up the bottom and removing the current RAM chip and replacing it with the one I have. Any help would be appreciated. Thanks!

Here is the Manual:
Manual
Memory is indeed on the motherboard and getting there requires nearly complete disassembly. See Page 4-26. Not sure how this qualifies as "easy" and if you have not done this before you should get some help. And yes, keep careful track of those screws.

Hard Drive and RAM upgrades for latest 15" MBP

I'm minutes from ordering a new MBP. Only concerns are whether I get hte Apple upgrades or shop around.
I like this Hard Drive...
http://www.compu2000.com/index.php?l=product_detail&p=6433
And this RAM upgrade...
http://www.a-power.com/product-10937-311-4
If these are equivalent to the apple options I can save hundreds and get a 320 GB drive, which will make a great portable.
So, does my plan hold water?

You're on your own for support when you do your own upgrades like this, but generally speaking, it works fine.
Note that HDD is less risky than RAM. With RAM you run the risk of unstable behavior that is tougher to diagnose. That said, a quality RAM upgrade and some initial testing with any of many available tools is as good as a factory build.
HDD upgrades are less risky, and I've upgraded (well, replaced after HDD death) ones in my MBPs many many times. I crunch my hard drives more than normal and have to generally replace them about every year. Some of the MBPs don't make this easy, and prepare to get all sorts of cozy with little 0 and 1 sized Phillips screwdrivers and some T6 as well, but it is doable (just not quite for the truly faint of heart).
Again, you're on your own for support once you do this, so weigh that in your decision.

This is the regular status of the memory of my macbook pro. Do you think I need a RAM upgrade?

Hi there,
I'm hoping to seek the expert views of the community here.
I have a MacBook Pro, Late 2011, 17 inch. Running latest version of Mavericks. Speed seems to have slowed somewhat, perhaps since I upgraded to Mavericks, but not certain about that. Based on my research of the Apple communities, I suspect that I may benefit from a RAM upgrade.
Attached are a few screen shots to assist:
Based on what I have researched in the community, the fact that I have used 3.99GB of 4.00GB, and have used 5.63GB of Virtual memory, seems to suggest to me that I have well and truly maxed out my RAM. Also there is a high number of read ins/outs (but it had been a wheile since I last did a restart on the MBP (if that has any effect on these numbers here).
I have also read that my model of MacBook Pro is upgradeable to 16GB of RAM (2 x 8GB).
Thoughts and views from the community would be greatly appreciated. Will additional RAM help the speed and performance of my MacBook Pro?
Many thanks.

More RAM is always a Prudent move...
Kerrod wrote:
Will additional RAM help the speed and performance of my MacBook Pro?
It will certainly help with Performance.
Macs can be very Fussy about RAM...
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
http://www.crucial.com
It is Important to get the Correct and Matching RAM
Those sites also have videos on how to Install RAM should you need it....

Video will not play on Canvas or NTSC after RAM upgrade

editing on a G5 v. 10.4.11, Dual 1.8 Ghz G5 with a recent upgrade to 4GB of ram. Have an AJA IO LA
After the RAM upgrade, FCP timeline will play but video is black in the canvas and image is frozen on the NTSC. Video WILL play in Viewer but no audio.
All cables have been checked to make sure they were put back correctly - will keep checking for errors in re-cabling computer.
Have tried refreshing displays and other tests with displays. Any info would be greatly appreciated.
Thanks!

pull the ram, problem goes away? - bad ram
you can pull 2 sticks at a time to isolate which chip it is.
did you get it from a good source - Crucial.com is my favorite, OWC is popular too - both have lifetime warranty

24" iMac (Primo 2009) strange RAM upgrade issue

I have a 24" iMac (Primo 2009) at work. I been granted a RAM upgrade by the IT department and have received 2 indentical 4 GB modules.
The 24" iMac (Primo 2009) uses 1066 MHz DDR3 modules and supports up to 8 GB RAM in 2 slots. I have purchased RAM from this source http://www.dustin.dk/product/5010642132/corsair-4gb-ddr3-1066mhz-1x4gb-so-dimm-i mac-macbook-macpro/#intcmp=searchProvider_SiteSeeker (Corsair Mac Memory so they SHOULD be fine.)
Here's the issue:
I had 2x 2GB modules. I have taken both out.
I have inserted the new 2x 4GB modules but the machine refuses to boot. It gives off 3 beeps-interval-3 beeps-interval (repeats).
I took out one of the 4GB modules from slot B. It boots.
I inserted the one I removed in slot B again so we're back at 8GB. same beeps. No boot.
I switched the 2 4GB modules from slot A+B around. Now beep-interval-beep-interval (repeats) No boot.
I inserted one 4 GB in slot 1, and one of the old 2 GB in slot 2. It boots with 6GB RAM.
I inerted only the one that won't boot when in slot B in slot A, beep-interval-beep-interval (repeats) No boot.
OK - so logical deduction tells me one of the new 4GB RAM modules is defective. No matter what configuration, booting fails with that specific module inserted, though there are different beeps. I also know tha both slots work since the machine works with 6 GB RAM (2+4).
So I called Dustin, and since we're a big customer they sent a new moduel for free. But, I have the same isssue with the new module!! What are the chances I have recived 1 working and 2 defective modules? not big right? So my iMac seems fine with the old 2GB modules and one of the new 4 GB modules, but says no to the 2 other 4GB modules.
YES - I have tried resetting PRAM and SMC to no avail. Any clue?

Switched the 2 modules around, so there's now a 2GB in slot A and a 4 GB in slot B. Still works fine
Model Name:
iMac
Model Identifier:
iMac9,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2,93 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
6 MB
Memory:
6 GB
Bus Speed:
1,07 GHz
Boot ROM Version:
IM91.008D.B08
SMC Version (system):
1.45f0

Kernel Power error after Win 7 and RAM upgrade

Hello,
I posted earlier on the subject of win7 and ram upgrades. I did both and it seemed to go fine. I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb. A couple of days later the computer just shut itself down and restarted. Since then it has done it another 5 times, seemingly at random. Yesterday I decided to spend some time looking into it and found the 'event log'. All the shutdowns are recorded as 'critical'. A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
After I did the win update I did update almost every driver with ones from this site.
Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go. I rolled back the alps driver and that seems to have sorted the cursor issue.
So, details of the shutdown from the event log are as follows.
Log Name:      System
Source:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
There's more (I've shown it all below) but it's not that important. When I looked into it I found details of the problem on the microsoft knowledge base. Its described here http://support.microsoft.com/kb/2028504.
I believe I fit into scenario 3 for cause and resolution.
So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them. I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it. BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.
Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas. It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
The full 'detail' regarding the fault is below.
Bye for now.
Phil
Log Name:      SystemSource:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
    <EventID>41</EventID>
    <Version>2</Version>
    <Level>1</Level>
    <Task>63</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000002</Keywords>
    <TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
    <EventRecordID>194889</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="8" />
    <Channel>System</Channel>
    <Computer>Home_Laptop</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="BugcheckCode">0</Data>
    <Data Name="BugcheckParameter1">0x0</Data>
    <Data Name="BugcheckParameter2">0x0</Data>
    <Data Name="BugcheckParameter3">0x0</Data>
    <Data Name="BugcheckParameter4">0x0</Data>
    <Data Name="SleepInProgress">false</Data>
    <Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>

Hi DWeiland and Schwede,
Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
Thanks again!
Thank you,
Sasi

Mac pro 5,1 RAM Upgrade

I am planning to give my Mac Pro (Mid 2010) another RAM upgrade. As the official Kingston/Crucial DIMMs do not include 16GB DIMMs, I think of choosing Kingston Value RAM: ECC Registered (3x, 16GB, DDR3-1600, DIMM 240). Has anyone here in the forum tried these?
Thanks for your comments.

The biggest official Kingston part is KTA-MP1333/8g which is a single 8GB module.
For 16GB modules the main criteria are that
It must be registered memory - not buffered, this is more because there aren't any 16GB buffered DIMMS
You cannot mix registered and buffered so any other existing memory left fitted must also be registered, as it happens you are supposed to not mix 16GB with smaller sizes anyway
It should be 1333Mhz DDR3 although in theory 1066Mhz DDR3 would work, again I don't believe there are any 16GB 1066Mhz DIMMS
It should be ECC (error correcting)
CL9
The presence of a Thermal Sensor is apparently not compulsory, i.e. memory without it will work in a Mac Pro.
I have not used any 16GB DIMMS myself but other than OWC as per the link provided by Illaass, the following might be suitable
KVR13R9D4K4/64i - this is a kit of 4 x 16GB and this article has a post from someone who says they worked for them http://forums.macrumors.com/showthread.php?t=1493588
If you can find a kit of 2 x 16GB of the same type then logically they should also work, they would probably be KVR13R9D4K2/32i. As a reminder to do 64GB or more you need dual processors. The single processor model Mac Pro 2010 is limited to 48GB.
See http://www.kingston.com/datasheets/KVR13R9D4K2_32I.pdf

Display problem after RAM Upgrade to MS6712

Hi there,
after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

OK, here's the info on my PSU;
It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

Do I need a RAM upgrade

Hi- I've got a PB 1.67GHZ (aluminum) with 1GB RAM (2 512MB chips).
I tend to leave lots of apps open (around 10) for my workflow. I'm always having to jump between apps. None of them are particularly taxing though I do play one game that takes over the system (so I shut down other apps for that). My system definitely gets slower with lots of apps open.
Currently, my Activity Monitor shows page in/out as 307943/213848. I'm thinking that second number is not good and I ought to get some more RAM.
In addition to recommending a RAM upgrade, should I go for just an upgrade to 1.5GB or go for 2GB?

Currently, my Activity Monitor shows page in/out as
307943/213848. I'm thinking that second number is
not good and I ought to get some more RAM.
Your system is memory deprived. The general guideline is that page outs should be 10% or less of page ins. Yours are currently about 69%, meaning for every 10 page ins, your system is paging out roughly 7 pages. A page out is where the system has to move something out of memory to disk to make room for something else, and that impacts performance.
You can upgrade to 1.5gb by installing a 1gb RAM strip, and monitor your page ins/outs and performance/feel. For what you run, that may do it for you. However, if you don't see much improvement, then going to 2gb is available to you.
Recommend Crucial, Kingston (not their valueram line), or Samsung memory, which has proven reliable in our PB's. Crucial can be found at their website http://www.crucial.com , Kingston at http://www.kingston.com , and Samsung is available from a number of companies, of which OWC at http://www.macsales.com is one source.

RAM upgrade on HP EliteBook 8730w

Similar Messages

Maybe you are looking for