RAM upgrade on Satellite L300-20D

I was wondering if the laptop L300 - 20D.
Can get a ram upgrade. It has 1024 MB RAM 800MHZ. And i need 1500 MB .

Your notebooks RAM can be upgraded up to 4 GB.
For upgrade you can use follow RAM modules:
512MB DDR2-667 - PA3511U-1M51
1GB DDR2-667 - PA3512U-1M1G
1GB DDR2-800 - PA3668U-1M1G
2GB DDR2-667 - PA3513U-1M2G
2GB DDR2-800 - PA3669U-1M2G
Bye

Similar Messages

  • Does Satellite L300-20D supports SATA or IDE HDD controller?

    Hello,
    I am trying to find out if my laptop hard drive is SATA OR IDE Connection, as I am buying a docking station for it Here are all the details.
    If someone can help me please, thankyou
    Model - Satellite L300 - 20D
    Part - PART NUMBER: PSLB8E-0CK00YEN
    Thankyou so much in advanced! xx

    Of course Im sure
    If you dont believe, install some kind of hardware diagnostic software like Everest Home Edit or Sandra SiSoft. Both would show you that the notebook supports SATA

  • Memory upgrade on Satellite L300

    I purchased a satellite L300 in august 08 in Australia. It came with a single 1Gb memory module which is now inadequate.
    I obtained 2 x 2Gb modules but cannot get it to work with both fitted. Bios reports 4Gb fitted but Vista reboots the first time then blue screens. Ubuntu Linux hangs after loading HAL.
    If only one module fitted it works OK and it does not matter which module is used.
    Any info on this would be most appreciated.

    Hi
    Either the chipset is not able to handle 4GB RAM or there is a compatibility issues between both modules.
    This is nothing unusual and happens very often that both modules cannot work together.
    In your case I recommend testing other modules.
    PS: Be sure that BIOS is up to date... if it's not up to date, then update it and then test both modules again...

  • Re: RAM upgrade on Satellite 1800-700

    I would like to upgrade my Satellite 1800-700 memory to 1024 RAM. My operating system is Windows XP. I currently have 512 RAM and the BIOS 2.20 TRAD.
    However, it would allow me to install 2x512 RAM.
    Please can anyone help?
    Thank you kindly.
    Lee

    I have found your laptop specifications:
    Satellite 1800-700 Memory Specifications
    Standard Memory 128 MB (removable)
    Maximum Memory 512 MB
    Memory Expansion 2 sockets
    Memory Comments PC133 SDRAM SODIMMs
    CPU Type 850MHz Intel Mobile Pentium III
    Model Comments 100MHz FSB
    So, as you see, the maximum supported memory is 512 mb

  • Is graphic card upgrade on Satellite L300-21W possible?

    Hi!
    I`m thinking to buy Toshiba Satellite L300-21W but i wat to play some games on it like Cod2 but I think that her serial graphic card is weak so my question is:
    " CAN I REPLACE GRAPHIC CARD WITH BETTER ONE OR NOT( and with which one if you know)!?!?!??!"
    Thank you!

    As far as I know graphic card on mobile computers cannot be upgraded. This is also described in follow document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
    So if you want to play different games with your notebook pick up info about models with better graphic cards.
    I can recommend you to check Satellite A300/A350 notebook models.
    Talk with your local dealer.

  • Processor upgrade on Satellite L300-1BV

    I've already upgraded the laptop from a T1600 (Celeron), to a T3200 (Pentium Dual Core). But does anyone know how far I can upgrade in the 478 P range of processors?
    If so, could you supply the processor numbers?
    +Message was edited: Model number changed in subject+

    Its a Satellite L300-1BV and NOT Satellite L300D-1BV
    This is big difference!
    However, the Intel GL40 Express chipset supports these CPUs:
    Intel Celeron Processor 575 (1M Cache, 2.00 GHz, 667 MHz FSB)
    Intel Celeron Processor 585 (1M Cache, 2.16 GHz, 667 MHz FSB)
    Intel Celeron Processor T1700 (1M Cache, 1.83 GHz, 667 MHz FSB)
    Intel Celeron Processor T3100 (1M Cache, 1.90 GHz, 800 MHz FSB)
    Intel Celeron Processor T1600 (1M Cache, 1.66 GHz, 667 MHz FSB)
    Intel Celeron Processor T3000 (1M Cache, 1.80 GHz, 800 MHz FSB)
    Intel Celeron Processor 900 (1M Cache, 2.20 GHz, 800 MHz FSB)
    Intel Celeron Processor T3500 (1M Cache, 2.10 GHz, 800 MHz FSB)
    Intel Celeron Processor T3300 (1M Cache, 2.00 GHz, 800 MHz FSB)
    Intel Celeron Processor 925 (1M Cache, 2.30 GHz, 800 MHz FSB)
    Source: http://ark.intel.com/products/35501/Intel-82GL40-Graphics-and-Memory-Controller-Hub

  • Satellite L300-20D is not starting up fully

    Please can someone help me out. I have a L300 20D toshiba and it has just stopped starting up fully. It goes to a black screen with the cursor arrow on or it just shows the launch windows (recommended repair) when i click this it does nothing. I have tried to restore using factory settings by pressing the zero key and then pressing power at same time to try and get the repair menu but still this isnt working.
    Please if any suggestions then would be greatly appreciated.
    Thanks

    Hello
    Before you spend hours and hours searching some repair options I recommend you to do the HDD recovery installation. After doing this you will have out of box state again and everything will work properly again.
    How to start HDD recovery installation you can on this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
    If you have more questions please let us know.

  • RAM Upgrade on Satellite L30-11D

    My brother has a Satellite L30-11D and he has bought an additional 2GB RAM to upgrade from 512MB.
    HE has sent me an email - extract below, but does not get regular access to Internet and therefore no time to post this.
    My laptop had 512 MB ram and I was told by Toshiba etc that it could be upgraded to 2 GB. I obtained 2 x 1 GB cards installed them.
    The problem is that if I remove the 512 MB card the laptop doesn't see the GB cards at all, so I put the 512 card back in and that was OK, then I put a 1GB card in and that worked OK, thinking it might be a dud card I triedthe other card plus the 512 and that works.
    Also if I put either one of the GB cards on their own in it works.
    According to Toshiba the computer can be upgraded to 2 GB RAM - so what am I doing wrong.
    Any ideas would be appreciated."

    Hi
    I googled and found this Satellite L30-11D specification page:
    http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new=Yes&PRODUCT_ID=128130
    According to this page the Sat L30-11D can be upgraded to 2GB RAM (2 x 1GB)
    You should use the 200pin DDR2 RAM (533 MHz) modules.
    I think the notebook does not recognize the 2GB RAM due to the compatibility issues You should try RAM modules from another manufacturer. Maybe Kingston would be ok.

  • RAM upgrade on Satellite L30 (PSL33L)

    I want to upgrade the RAM of this laptop, but went exceed 2gb which are 1gb+1gb of 667mHz the computer will booting normally and work like usuall but after that the computer turn blue screen and restart. Currently using XP Pro SP3 with the latest bios v3.01. In the event viewer the error is system error.
    Error code 1000008e, parameter1 c0000005, parameter2 bf097509, parameter3 a50d726c, parameter4 00000000.
    Category : 102
    Event ID : 1003
    Data in byte:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 31 30 30 30 30 30 38 1000008
    0020: 65 20 20 50 61 72 61 6d e Param
    0028: 65 74 65 72 73 20 63 30 eters c0
    0030: 30 30 30 30 30 35 2c 20 000005,
    0038: 62 66 30 39 37 35 30 39 bf097509
    0040: 2c 20 61 35 30 64 37 32 , a50d72
    0048: 36 63 2c 20 30 30 30 30 6c, 0000
    0050: 30 30 30 30 0000
    Data in word:
    0000: 74737953 45206d65 726f7272 72452020
    0010: 20726f72 65646f63 30303120 38303030
    0020: 50202065 6d617261 72657465 30632073
    0030: 30303030 202c3530 39306662 39303537
    0040: 3561202c 32376430 202c6336 30303030
    0050: 30303030

    Hi ,
    I have the same model L30-134 psl33l the max Ram suported is 2 GB i have upgraded my laptop this year works fine....
    PS:I have the same blue screen problem and freez problems after a new hdd upgrade...if you have any id pls. reply to my post.
    My 2GB memory module is the same to yours 667mhz and works fine.
    Message was edited by: mtolokan

  • Ram Upgrade on Satellite P500 - from 4GB to 6 GB

    I get the feeling that I'm asking a stupid question but here goes.
    Just bought a P500 with 4Gb memory and decided to go with the recommended 2Gb upgrade. Went to install the ram chip and could only find 2 slots both of which are occupied with the existing 2Gb chips.
    Is there another expansion slot that I'm missing or have I been sold a lemon in the form of the recommended 2Gb upgrade?
    Thanks and Happy New Year

    Hey,
    No, there is no hidden RAM slot because notebooks are equipped with 2 RAM slots only but usually its enough.
    So for an upgrade you have to buy a 4GB module and replace it with one 2GB module. The other 2GB module you can still use, then you an amount of 6GB. :)

  • Keyboard is not working on Satellite L300-20D

    My laptop is 3 years old and I have recently upgraded it to Windows 7 and everything worked fine. The keyboard has stopped working but I can log on and use an external keyboard.
    I have tried updating the driver and returning to a previous restore point but it's not made any difference.
    Any ideas please?

    I have a Tosh Sataleite L300-11v and have the exact same problem.
    I restored the Bios after a failure and ever since the internal keyboard won't work in either DOS or Windows..
    I have even tried a replacement keyboard but this not work either.
    External keyboard via USB works fine after booting into windows.
    Driving me crazy..
    Any ideas welcome.....

  • Questions about ram upgrade of Satellite L100 (PSLA3L)

    I have the above laptop and a new stick of Ram, don't have a manual however are there instructions for upgrading this?
    I've opened the back and type of clip that holds the RAM is unfamiliar to me. I can see how it goes in but it doens't clip in easily which leads me to belive i'm missing somthing, either that or it requires an ungodly amount of force.
    Grateful for any assistance

    Why you dont take a look into the user manual???
    There is an detailed instruction placed ;)
    Simply remove the cover, lift one side of the insulator sheet and fit the modules connectors into the computers connectors at about 45 degree angles. Press the module careful to ensure a firm connection.
    Push the module down so it lies flat. Latches on either side will click into place to secure the module
    Thats all

  • BSOD after RAM upgrade on Satellite L350-14F

    Hi,
    I have a L350-14F and i upgraded my ram with 2x2GB PC5300- 667mHz
    When i start the laptop in the bios i see 4096 of ram but when i restart the laptop i have a bleu screen.
    PFN_LIST_CORRUPT
    STOP: 0x0000004E (0x0000008D, 0x00090ET2, 0x00000000, 0x00000000)
    windows vista 32 bit sp2 French
    bios 1.5

    According to http://support.microsoft.com/kb/291806/ (add fr to this link to read it in French) faulty memory module is one of possible source of such errors.
    Also it may be caused by driver. And this is the worst case, because any 32-bit (actually x86) windows can NOT operate with 4GBs of RAM due to its architecture (there are some "virtual disk drivers" that can do this by tricks).
    Memory addresses above 3GB (or 3.1-3.3 GBs) are reserved for hardware needs. This may interfere with OS memory management and causes BSOD. It is very hard to locate and fix it (at least remotely).
    1. Interchange modules with each other - bad contact may cause faults.
    2. Remove one module and test memory (memtest+ is the best tool for this), then replace it with the second one and test memory again. This may or MAY NOT show defective module.
    3. If modules seem to be OK after memory tests, you can try any live linux distro (e.g. Ubuntu). If it falls down you will be sure about faulty memory.
    If not - replace this pair with another model/brand. Doesn't matter whether or not modules are in "compatibility list" for your laptop - practical way is the only way.
    But this may be iterative.
    And first of all - check manual for memory configuration (2 GBs, 2+2GBS, 2+1GBs) and memory type (PC5300- 667mHz etc.).

  • After RAM upgrade on Satellite L30-10S only one RAM stick is recognized

    I just added an 1GB Crucial Ram stick into the L30-10S (PSL33E), but only the 1GB get recognized, the Hyundai stick (512MB), which was supplied with the laptop, isn't been used by the system anymore.
    I tried switch around, but I can only get 1 RAM stick to work at the time, either 1GB, when both rams are placed in the slots or if only the 1GB is installed or 512MB when I leave the 1GB out.
    Did anyone actually managed to get 2 Stick running simultaneously, on this system?
    BTW CPU-z did recognize both sticks and reports correctly 1536MB, the BIOS however only 1GB, actually less, since some is taking by the graphics card.
    The BIOS version on my system is V2.80, dated 03/05/2007 and both memory are the same speed PC2-4200.

    Did you really read all those topics???
    From http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22405:
    "I heard about a user how has Samsung 512mb and Kingmax 1gb ram in his L30 and everything is fine, he has no problem with it.
    I have two 512mb Samsung modules and have no problem."
    From http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23014:
    "You can use 667Mhz modules, but they'll work on 533 Mhz. I read in another forum about a guy, how has 533Mhz and 667Mhz RAM in his L30, and he has no problem."
    L30 series supports memory up to 2gb, and if you use memory from a reliable brand, you'll have no (compatibility) problem. Maybe Crucial ram is not the best choice. As I see all those guys have problem with Crucial ram. Something's wrong with it...
    And don't forget something: opening a new topic won't help you, if nobody can solve the problem in another topics...
    PS: Try Kingmax, Kingston, Samsung, Corsair modules. I never had problem with those brands.
    Message was edited by: Abe83

  • Satellite L300-20D CD-ROM DRIVE NOT WORKING

    WHEN A CD IS PLACED IN THE CD-ROM DRIVE SOFTWARE INSTALLATION MENU DOES NOT APPEAR.
    HOW CAN I GET IT WORKING .PLEASE ANY OFFERS

    >WHEN A CD IS PLACED IN THE CD-ROM DRIVE SOFTWARE INSTALLATION MENU DOES NOT APPEAR
    Go to My Computer and double click on CD/DVD drive. This should start the exe file on the disk.
    Otherwise click right and choose Open.
    Now you should see the content of the disk.
    Here you could choose setup.exe or installtion.exe

Maybe you are looking for