RAM using higher after upgrade OS X 10.9

RAM using higher after upgrade the OS X 10.9 in MacBook Pro 13 (2011).
Still its using atleast 4GB RAM normally after the startup...!   then 2 -3 apps in use the it take more RAM 5.30Gb out of 8GB...!! 
But Still Mac working Faster..
Thanks

Now I'm testing...    These all apps as same time...  RAM using 7.98 Gb out of 8GB
But Mac Still FASTER>>>!!
Mail
Safari with 5 tabs
Firefox with 5tabs
Chrome with 5tabs
iTunes
iBooks
Maps
Calender
PhotoBooth
Preview
iMovie
iPhoto
Activity Monitor
uTorrent
Skype
Adobe Audition
Final Cut Pro
Awesome..!!

Similar Messages

  • Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

    I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

    I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
    You may get a better responce in the iDVD forum.
    https://discussions.apple.com/community/ilife/idvd
    regards

  • I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

    I can't open firefox after upgrading to 4.0
    I get the message over and over again that i have to restart my computer for upgrading to firefox.
    I tried new installation. But i got problems on all my accounts

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    Starting The Computer In Safe Mode;
    If running, turn your computer off.
    Remove any disks and thumb drives that are in your hard drives or ports.
    Now start your computer but also;
    '''Windows; '''Press the <F8> key repeatedly.
    '''Mac: '''Hold down the Shift key.
    '''Linux; '''Using the command line, Linux/Unix computers can be booted
    into various run levels that determine which resources are loaded.
    For example, "runlevel 1" is typically the equivalent to Windows and
    Mac safe modes.
    * Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
    When the '''Boot''' menu is displayed, release the key you were pressing.
    You must now choose what mode to use. The most used are;
    * Safe Mode; The computer runs with only a minimum set of programs.
    * Safe Mode '''With '''Networking; Same as above, but with internet access.

  • Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

    Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

    Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
    Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
    Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
    Enable iCloud syncing for Pages on your mobile device and launch the App.
    If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

  • Couldn't use Remote after upgrading OS

    Hi,
    I've just bought Apple TV Gen3, after connecting everything, I used my iPhone/iPad to control Apple TV throught "Remote app" from Apple Store, it's no problem (default version is OS5).
    But I knew that OS is old version so I upgraded that become OS6.0.2 and use, after upgrading, it has trouble:
    1. The airplay is too slow, I stream my video from iPhone/iPad but it run too slowly even my phone and Apple TV just 2m.
    2. If I choose Viet Nam language, I couldn't use "Remote app". My iPhone/iPad couldn't find out the Apple TV (but previous version ok).
    So I would like to know what is problem and how to solve that.
    Thanks.

    Try using the -v option to see if additional debugging information helps
    sftp -v remote.system.addr
    sftp -v -v remote.system.addr
    sftp -v -v -v remote.system.addr

  • Opera crashed when using gmail after upgraded

    After upgraded 3 days ago,I got the problem of opera crashed when I am using www.gmail.com.
    Don't know what's wrong.Does anyone have the same problem?

    I am  one of the men who moved form firefox to opera,because opera launch faster than firefox,so I will wait another version that fix the crash problem.
    Someone said the opera8.52 is faster than opera9,is that true?
    I don't like the bt in the opera,I have my bt client better than him.

  • Invalid server: while using wlan after upgraded to...

    After upgraded to the new firmware (520007). While connect using wlan my phone shows that Invalid server and some times not replying. I goggled my problem and found that most are facing the same problem; is there any solution for it?  Advance thaks.

    Try deleting your wlan settings and key in a new setting after rebooting the phone. It may help...
    blitZkid
    Nokia C7: Running on Nokia Belle
    "If I'm helpful in anyway, a click of appreciation on the star would be nice"

  • PSE 10 crashed using Photomerge after Upgrade WIN to 8.1

    Used PSE10 on WIN 8 64Bit CPU well.
    After upgrade WIN8.0 to 8.1 i allways get an Error (PSE 10 did not function properly. Program will be closed and you will be informed if there is a solution available   = in German: Adobe Photoshop Elements 10 funktioniert nicht mehr.  Das Programm wird geschlossen und sie werden benachrichtigt wenn eine Lösung verfügbar ist). Re-Installing PSE10 did not solve the Problem.

    I found the solution:
    It was a parsing bug in Oracle client, with the most recent version 9.2.0.7 it works.

  • Unable to login to gnome using gdm after upgrade to 3.6

    Hi to all,
    After the upgrade to gnome 3.6 I'm not able to access to gnome anymore. It appears gdm background but after a while it says that there was an error, it will disable all extensions, but after closing it reloads but the same error appears! I've checked similar posts but no luck, configuration files in my home directory have been purged but no luck again.
    Please help me, this is my xsession-errors:
    /etc/gdm/Xsession: Beginning session setup...
    localuser:marco being added to access control list
    /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    gnome-session[1570]: EggSMClient-WARNING: Desktop file '/home/marco/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
    GNOME_KEYRING_CONTROL=/home/marco/.cache/keyring-wxwmWf
    GNOME_KEYRING_CONTROL=/home/marco/.cache/keyring-wxwmWf
    SSH_AUTH_SOCK=/home/marco/.cache/keyring-wxwmWf/ssh
    GNOME_KEYRING_CONTROL=/home/marco/.cache/keyring-wxwmWf
    GNOME_KEYRING_CONTROL=/home/marco/.cache/keyring-wxwmWf
    SSH_AUTH_SOCK=/home/marco/.cache/keyring-wxwmWf/ssh
    GPG_AGENT_INFO=/home/marco/.cache/keyring-wxwmWf/gpg:0:1
    ** Message: applet now removed from the notification area
    Failed to play sound: File or data not found
    ** (gsynaptics-init:1664): WARNING **: Using synclient
    Initializing tracker-miner-fs...
    Initializing tracker-store...
    Tracker-Message: Setting up monitor for changes to config file:'/home/marco/.config/tracker/tracker-store.cfg'
    Tracker-Message: Setting up monitor for changes to config file:'/home/marco/.config/tracker/tracker-miner-fs.cfg'
    Initializing nautilus-dropbox 1.4.0
    Tracker-Message: Setting up monitor for changes to config file:'/home/marco/.config/tracker/tracker-store.cfg'
    Starting log:
    File:'/home/marco/.local/share/tracker/tracker-store.log'
    Starting log:
    File:'/home/marco/.local/share/tracker/tracker-miner-fs.log'
    ** Message: Stopping applet secret agent because GNOME Shell appeared
    failed to create drawable
    ** (nautilus:1655): WARNING **: Can not determine workarea, guessing at layout
    ** Message: applet now embedded in the notification area
    Avviso del window manager: CurrentTime used to choose focus window; focus window may not be correct.
    Avviso del window manager: Got a request to focus 0x1600004 (Scrivania) with a timestamp of 0. This shouldn't happen!
    Avviso del window manager: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
    (gnome-shell:1632): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
    Individuals will not be linked properly and creating new links between Personas will not work.
    The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
    (gnome-control-center:2782): datetime-cc-panel-WARNING **: could not get proxy for DateTimeMechanism: Errore nel chiamare StartServiceByName per org.freedesktop.timedate1: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 1
    (gnome-control-center:2782): datetime-cc-panel-WARNING **: Timezone '(null)' is unhandled, setting Europe/London as default
    /usr/bin/nautilus
    Avviso del window manager: Specificato un WM_TRANSIENT_FOR finestra 0x1c00004 non valido per 0x1c00002 (texmaker).
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00049 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00049 already in stack
    (gnome-screensaver:1670): GLib-GIO-WARNING **: Missing callback called fullpath = /usr/share/themes/Adwaita/backgrounds/adwaita-timed.xml
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00052 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00052 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c0005c already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c0005c already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00060 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00060 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00063 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00063 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00066 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00066 already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c00069 already in stack
    Avviso del window manager: Got a request to focus 0x1600004 (Scrivania) with a timestamp of 0. This shouldn't happen!
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c0017e already in stack
    Avviso del window manager: Log level 16: STACK_OP_ADD: window 0x1c0017e already in stack
    QProcess: Destroyed while process is still running.
    Avviso del window manager: CurrentTime used to choose focus window; focus window may not be correct.
    Avviso del window manager: Got a request to focus 0x1600004 (Scrivania) with a timestamp of 0. This shouldn't happen!
    (gnome-settings-daemon:1601): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1601): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    [1351670798,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
    Avviso del window manager: Log level 16: gnome-shell: Fatal IO error 0 (Successo) on X server :0.
    dropbox: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    (nm-applet:1654): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.
    (nautilus:1655): Gdk-WARNING **: nautilus: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.
    (gnome-screensaver:1670): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.
    guake: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.
    (gnome-shell-calendar-server:1713): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Received signal:15->'Terminato'
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Received signal:15->'Terminato'Tracker-Message: Closed sqlite3 database:'/home/marco/.cache/tracker/meta.db'
    Tracker-Message: Closed sqlite3 database:'/home/marco/.cache/tracker/meta.db'
    OK
    (tracker-miner-fs:1658): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: La connessione è chiusa
    (tracker-miner-fs:1658): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: La connessione è chiusa
    (tracker-miner-fs:1658): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: La connessione è chiusa
    OK

    I had a similar issue two hours ago. It was caused by some extensions i had installed. After i removed the directory ~/.local/share/gnome-shell, i managed to start gnome-shell.
    After that, i ran into some keyring-related issues that would block gnome-shell completely. I 'solved' it by removing all keyring-related config files and logging in again (i had to save all my passwords again, but i can live with that, now that it's back in the keyring).

  • Can't view pdf files using safari after upgrading 10.5.8 to  10.6.5

    I noticed that right after I upgraded from Leopard 10.5.8 to Snow Leopard 10.6.5, I no longer could view any pdf's I would click on unless I used "control click" option to download the file/pdf. Before upgrading all I had to do was click on a pdf link and it opened up automatically in a new window. Now all I get a black screen unless I "control click"
    I am thankful that I saw in the discussion area that I at least have a way to view it but do not understand why upgrading to 10.6.5 changed the way I use to be able to open/view pdf files.
    Thanks

    Hi keyag
    I suspect you've an adobe pdf viewer plugin that requires safari to run in 32 bit mode. Either remove it from HD/Library/Internet Plug-Ins/ & restart Safari; or select Safari in Applications, do a File-Get Info - and check the 32 bit box, again restarting Safari.
    ... do not understand why upgrading to 10.6.5 changed ...
    probably because 10.6.x runs Safari as a 64 bit process by default, and the plugin won't work that way. Maybe there's an update for it (assuming the plugin guess is correct )

  • N97mini cannot use GPS after upgrading

    hi there, just as mentioned, i bought n97mini and tried to use its gps function in UK. it worked perfectly before i upgraded
    but after i downladed the nokia ma loader and upgrade map in my mibilephone, navagtion , my location, maps.....all could not find even 1 gps signal...i tried online with internet(WIFI)/ WAP , but nothing happened....
    any solutions for it? thx

    Jim64,
    Thanks for your response, Jim. I had changed nothing on my handset so it SHOULD have continued working as it was.
    However, just to let you know I have the same criteria set as yourself (Server use - Auto, APN - Internet, but the server address I have set as supl.vodafone.com (whereas you have set as supl.Nokia.com. However, whilst the server would help as A-GPS (to establish a quicker fix), the GPS data is direct from the satellites as opposed to data received from the server.
    The other items you mention (positioning) I also have them set the same as yourself.
    Today I managed to actually obtain a fix (GPS that is!! :-)  ), but it took about 10 mins, whereas before it used to normally fix within about 30 secs, so I am now thinking it MAY???? have something to do with atmospherics - A "long shot" but I guess a possibility. Having said that, I tried with my N82 (which I've not used for about 6 months), and that obtained a fix within about 30secs, after it's initial positioning of about 15mins. Thereafter it (N82) fixed within about 30 secs. Mmmmm. interesting..
    Thanks once again for your help. It was much appreciated.
    Cheers
    N97MINI from 150310, after the N97 (number3) drove me mad!! Prev handset N82, 6230i, N80, 6600, 6310, 5110, 3210, 6300, and others :-)
    kevinx_98 on Skype

  • Can't use nano3rdg after upgrading its software

    I upgraded the nano software but then the I tunes wont recognise it as I don't have the latest i tunes software. (need version 7.6) Cant restore the nano as the I tunes won't recognise it (catch 22) Cant upgrade to I tunes 7.6 as this requires windows service pack 2 which I cant install because my puter is too old. Can't afford new 'puter. Any way to down grade my nano software so I can at least use it? Seriously, I can't buy a new 'puter just yet but I need to change the songs on the i pod.

    A little different, but also problem
    I have been updated ipod to 1.1.2 and after that white line appear at left side of the screen.
    How to step back to previous firmware?
    And one more, it seems like a lot of people have troubles with new firmware and Apple do nothing with it! Strange...

  • It prints higher after upgrade!!

    Did complete upgrade again after a few months. Everything but printing looks like it's running as before.
    I overlooked all settings, there is still A4 paper everywhere, nothing seems broken, but the system still tells the printer to start printing sooner! So now it printes some 1 cm higher on the paper and there is blank room on the bottom. Basicly everything is moved higher on the sheet. What happenned to it?

    Why don't you recalibrate your printer first?
    If that doesn't work you can start working your way through the backlog of upgrades .

  • No audio hear by 3rd party using carrier after upgrade ios5.1.1

    after i used iCloud upgrade the iOS5.1.1 and I found my iPhone4 got issues on carrier whereby 3rd party unable to hear me at all although I have done all the below before I restore my backup data.
    Reset all data and all setting
    manually restore iOS5.1.1
    reset all network setting
    I also tried to change my sim card from telco company and even we tested to place my sim card on other iPhone4 and proven it is working. Vice versa, we tested to use my friend's sim card on my iPhone and same issues occurred whereby 3rd party can't hear my voice but I can clearly hear them.
    Lastly, I've tested the app of skype and viber to make video call or call, it is working fine but it is not working when I use the carrier call (GSM) to 3rd party.
    I suspect it is iOS5.1.1 issues rather than hardware issues because tested the mice of my iPhone is working perfectly by using the talking toy app.
    Pls. advise who can help me?

    uncheck the "Wait for Far End" option. Also, check and see what codec is coming across on the local AND Remote phone (if possible...I know the remote is a station on the key system, so I don't exactly know how to check that unit...) and see if it is actually coming across as a G711 and NOT a G729, which needs a transcoder, as you know...
    I ran into this problem and did some manipulation with IOS transcoders through the call legs to get it to process correctly.

  • I can't use FaceTime after upgrading to Lion!

    Hi,
    Yesterday I upgraded my MacBook to Lion, and afther I upgraded FaceTime does not work. I used it prior to my upgrade, and it worked perfect.
    I have a neew macbook pro 13" 2,3ghz bought on sunday, so its brand new!!
    When I try to use FaceTime I log in fine, but when I´m calling out the call will not connect. It´s realy frustrating since i´m an exchange student fare away from home and want to call home!
    Have anyone a solution to my problem?
    Thanks!
    Annbjoerg

    I have the same problem between 2 iMac, 2 MacBookAirs and 2 iPhones (10.7 / 4.3.5). It just doesn't connect. For a while it helped to set the FaceTime app language to default English. I used LanguageSwitcher for that purpose. But it doesn't seem to be stable.

Maybe you are looking for