Rampreview skips over parts of my timeline of my work area
Computer specs:
AMD a4-3400 APU processor
Radeon(tm) hd graphics 2.70 ghz
4.00 gb RAM
64 bit
Adobe After Effects CC (12.2)
First off I'd like to say i'm a call of duty editor and i've never had this problem before in any projects in after effects.
Recently, I have been having an issue with adjustment layers hindering my ram preview ability sometimes.
Occasionally If I add an adjustment layer, my ram preview yields to preview that section that is encompassed by the adjustment layer (below) and sometimes it even fails to preview anything after.
http://gyazo.com/df5806e1478acbacdb8e8ce30137570a
During the ram preview, my video will play but it will end where this adjustment starts, and it will repeat from the beginning like any ram preview does.
this is the only picture I have because it's really all this problem consists of.
I have tried purging my cache, yet the same ordeal happens when I repeat the ram preview.
This hasn't ever happened to me up until about a week ago in which this first started happening in my last project I worked on. I really have no idea as to what I should do next, and I'd greatly appreciate any help or solutions.
UPDATE:
Now whenever I try to open the project. It says: " after effects error: crash occurred while invoking effect plug-in " and it continues to list every plug in I used in my top adjustment layer that consisted of my color correction. I really have no idea what's going on in my after effects
Similar Messages
-
Play a specific part of a timeline
I found this topic which is really close:
Play a specific part of a timeline
I have 4 objects sitting in a circle. Similar to a compass. When I click on one of the objects, it should move in a circular path to the topmost position (north). It can go clockwise or counter-clockwise (whichever is closer) in order to get to the north position.
I was using labels and can use play("symbol_name") to start at the right time. but if I follow that command with stop(X) where X is a point on the timeline, it immediately jumps to that point instead of traveling the timeline to get there. It basically ignores the circular animation and jumps to the final destination.
I can't put stop() on the timeline as a trigger because an object may need to pass over it. For example, I want to move object 1 from point A to D (skipping B and C). If I had stop() triggers at B and C, I could never get the animation to play from A-D.
BTW the objects are grouped together as a symbol and so when I click one of the objects, I am actually rotating the parent and then rotating its children the same amount in the opposite direction.
Any suggestions? Thanks.Thanks Vivekuma,
I have uploaded the project here:
edge3.zip - Google Drive
Only the clock, people and the monitor icons have click behaviors now. As a reminder, the goal is that when I click on an icon, I want it to rotate to the north position (choosing clockwise or counter-clockwise depending on which is the shortest route).
It's working on the first click with the monitor icon (by first click I mean after a screen refresh). But on first click with the clock where I am using playReverse, it plays to the next trigger and then and then does a play (not reverse). I think that is because it gets to the trigger and then I am issuing a play command instead of continuing the existing playReverse command. So instead of a play command at each trigger, I guess what I need is a "continue" action that just allows it to keep going. Is there such a thing?
Also, notice this: refresh, click the monitor and then click the monitor again. The first click should take it to the north position. Clicking again should just stay there but instead it goes to the home position.
Lastly, is there a way to render a type string on the page that just shows the current position (time and label)? Thanks,
Mat -
I got this laptop refurbished from Apple in July. It was originally released in October 2011. I have watched DVD's on it previously, but lately, in the past 3 weeks, it's been pooping up the "skipping over damaged area" message. I put in a brand new DVD and half way through, it did it again, and I can't get past it. Any thoughts on what the problem may be?
You can just open Terminal (in Utilities) and run the rm command (make sure you type it exactly) and then reboot. With /.AppleSetupDone gone the system will think it is the the second part of an installation, i.e., after it installs and reboots and starts the Setup Assistant. You will see the Welcome and music all over again and then you can go through the setup prompts again, this time specifying a password.
-
DVD player say's it's skipping over damaged area when dvd is fine
I have a problem playing box sets from abc studios on my Macbook Pro. They play perfectly well through the trailers and set up but as soon as I select play all or select an episode, they stop and I either get the error message "skipping over damaged area" before they hang or they just hang straight away. This has happened with four different box sets so far. The DVDs are fine and undamaged.
We have had the same problem ever since we bought our machine 60 days ago... Here's where we are: DVDs, even brand new ones, skip - "skipping over damaged area" on our iMac while our MBP and MB play them flawlessly. There is no loss in the movie, only the pause in play.
Our software is up to date, we took it into Apple over three trips: 1.) had them clean our dvd drive, 2.) problem persisted so we replaced the dvd drive, 3.) problem persisted so we wiped out our entire hard drive and did a software re-install and update... and problem still persists! We are are packing it up for a fourth time and will take it into Apple to have them replace the machine or all the parts...
We're bummed, it's our 3rd Apple computer and the 'biggest' and yet it cannot do the simple things? We'll keep you posted as to what happens. -
IPod skips over purchased music
I have a weird problem with my iPod, and I was hoping someone here could help me with it.
Every couple of weeks, my iPod goes through this weird stage. It will not play any of the songs I purchased from iTunes. I can click on them normally, but then it just skips over all of them instead of playing even one second. It plays all the songs from CDs and songs I had on my computer before just fine, but NONE of the songs I've purchased from iTunes.
Another weird part is that whenever I hook the iPod up to the computer, the problem goes away. But this doesn't help much, because I'm going to be away from my computer for most of the summer, and I would like a working iPod. Most of my files are from iTunes, too.
I know this is a really weird problem...I couldn't find anything on the apple FAQ, etc, so I'm sure it's not common. If anyone could help me with it, though, I would reallllllly appreciate it. Can anyone tell me why it does this, or (most importantly!!!!!!!) how to prevent it?Welcome to Apple Discussions!
Make sure all the software on your computer and iPod is up to date...
iTunes
iPod Updater
Updating iPod's Software
Also, try the steps listed here...
http://docs.info.apple.com/article.html?artnum=303854
btabz -
Skipping over incompitable object - on Undeployment of Resource Adpater
Problem Statement: WLS6.1 SP2 on NT 4.0
** Single WLS Admin Server - NOT CLUSTERED****
1. Deployed Resource Adpater at JNDI IICF.
2. ManagedConnectionFactoryCreated.
3. Trying to Undeploy - Generates following errors.
After effects:
View JNDI has (access denied). Is JNDI corrput now?
The IiConnectionFactory is completely serializable. All members are String or
primitive int types. Only one transient member of PrintWrite.
Weblogic Log:
IiManagedConnectionFactory::createConnectionFactory(?):1
Skipping over incompatible object at name=IICF, className=IiConnectionFactory
javax.naming.CommunicationException. Root exception is java.rmi.UnmarshalExcept
ion: failed to unmarshal interface javax.naming.NamingEnumeration; nested except
ion is:
java.lang.ClassNotFoundException: IiConnectionFactory: This error could
indicate that a component was deployed on a cl
uster member but not other members of that cluster. Make sure that any component
deployed on a server that is part of a cluster is also deployed on all other
me
mbers of that cluster
java.lang.ClassNotFoundException: IiConnectionFactory: This error could indicate
that a component was deployed on a cluster me
mber but not other members of that cluster. Make sure that any component deploye
d on a server that is part of a cluster is also deployed on all other members
of
that cluster
at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:16
2)
at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:10
6)
at weblogic.common.internal.WLObjectInputStream.resolveClass(WLObjectInp
utStream.java:49)
at java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java
:918)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:366)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1186)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:386)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at weblogic.jndi.internal.BindingEnumeration.readExternal(BindingEnumera
tion.java:65)
at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1212)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:386)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at weblogic.rmi.internal.CBVInputStream.readObjectInternal(CBVInputStrea
m.java:191)
at weblogic.rmi.internal.CBVInputStream.readObject(CBVInputStream.java:1
82)
at weblogic.rmi.internal.CBVInputStream.readObject(CBVInputStream.java:1
69)
at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:56)
at weblogic.rmi.internal.BasicRemoteRef.unmarshalReturn(BasicRemoteRef.j
ava:232)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:263)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:229)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy49.listBindings(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:
309)
at javax.naming.InitialContext.listBindings(InitialContext.java:399)
at weblogic.management.console.webapp._jndi.__nav.printContext(__nav.jav
a:116)
at weblogic.management.console.webapp._jndi.__nav._jspService(__nav.java
:254)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispat
cherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112
at weblogic.management.console.actions.ForwardAction.perform(ForwardActi
on.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(A
ctionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doGet(Acti
onServlet.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Might sound funny but try adding the connectors compiled classes (or the
jar) in to WLS's classpath...
I has a similar problem...
"Chris R" <[email protected]> wrote in message
news:[email protected]...
>
> Problem Statement: WLS6.1 SP2 on NT 4.0
> ** Single WLS Admin Server - NOT CLUSTERED****
>
> 1. Deployed Resource Adpater at JNDI IICF.
> 2. ManagedConnectionFactoryCreated.
> 3. Trying to Undeploy - Generates following errors.
>
> After effects:
>
> View JNDI has (access denied). Is JNDI corrput now?
>
> The IiConnectionFactory is completely serializable. All members are String
or
> primitive int types. Only one transient member of PrintWrite.
>
>
> Weblogic Log:
>
> IiManagedConnectionFactory::createConnectionFactory(?):1
> Skipping over incompatible object at name=IICF,
className=IiConnectionFactory
> javax.naming.CommunicationException. Root exception is
java.rmi.UnmarshalExcept
> ion: failed to unmarshal interface javax.naming.NamingEnumeration; nested
except
> ion is:
> java.lang.ClassNotFoundException: IiConnectionFactory: This error
could
> indicate that a component was deployed on a cl
> uster member but not other members of that cluster. Make sure that any
component
> deployed on a server that is part of a cluster is also deployed on all
other
> me
> mbers of that cluster
> java.lang.ClassNotFoundException: IiConnectionFactory: This error could
indicate
> that a component was deployed on a cluster me
> mber but not other members of that cluster. Make sure that any component
deploye
> d on a server that is part of a cluster is also deployed on all other
members
> of
> that cluster
> at
weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:16
> 2)
> at
weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:10
> 6)
> at
weblogic.common.internal.WLObjectInputStream.resolveClass(WLObjectInp
> utStream.java:49)
> at
java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java
> :918)
> at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:366)
> at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
> at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1186)
> at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:386)
> at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
> at
weblogic.jndi.internal.BindingEnumeration.readExternal(BindingEnumera
> tion.java:65)
> at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1212)
> at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:386)
> at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
> at
weblogic.rmi.internal.CBVInputStream.readObjectInternal(CBVInputStrea
> m.java:191)
> at
weblogic.rmi.internal.CBVInputStream.readObject(CBVInputStream.java:1
> 82)
> at
weblogic.rmi.internal.CBVInputStream.readObject(CBVInputStream.java:1
> 69)
> at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:56)
> at
weblogic.rmi.internal.BasicRemoteRef.unmarshalReturn(BasicRemoteRef.j
> ava:232)
> at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
> ef.java:263)
> at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
> ef.java:229)
> at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
> at $Proxy49.listBindings(Unknown Source)
> at
weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:
> 309)
> at
javax.naming.InitialContext.listBindings(InitialContext.java:399)
> at
weblogic.management.console.webapp._jndi.__nav.printContext(__nav.jav
> a:116)
> at
weblogic.management.console.webapp._jndi.__nav._jspService(__nav.java
> :254)
> at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
> pl.java:265)
> at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
> pl.java:200)
> at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispat
> cherImpl.java:241)
> at
weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112
> )
> at
weblogic.management.console.actions.ForwardAction.perform(ForwardActi
> on.java:35)
> at
weblogic.management.console.actions.internal.ActionServlet.doAction(A
> ctionServlet.java:171)
> at
weblogic.management.console.actions.internal.ActionServlet.doGet(Acti
> onServlet.java:91)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
> pl.java:265)
> at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
> pl.java:200)
> at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
> rvletContext.java:2495)
> at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
> pl.java:2204)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
-
My iPod touch is skipping over certain songs it used to be able to play, help?
It started a little over a week ago. It was after I had downloaded the recent update, I was listening to music and skipped this one song when I noticed it skipped over two. Then I tried playing one song and it skipped over that one and the next completely. I skipped back and it wouldn't play the song I had orginially wanted, but did play the one after it that it had skipped over. I've tried turning it off and reseting it. I'm at a real loss here because I thoughted it would be just a glitch and go away, but at this point I'm really fed up. I have a feeling it has to do with the recent updates since it use to play the songs it skips over now just fine. The songs have almost nothing in common and so far I've found it's about a donzen or so it skips over.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Automator (or anything) to mass transfer one file at a time, or skip over corrupted files?
I'm currently recovering files (using Disk Warrior) from a failing hard drive, but when OS X hits a corrupted file ("Error -36"), it cancels the entire transfer, rather than skipping over it. Basically, I have to transfer one file at a time, which, on a 2TB hard drive, is going to be insanely tedious, so I was wondering if there's an automation that can transfer one file at a time, or some other way to transfer files that won't stop mid-process?
in my experience, people who know enough unix to understand what you suggested rarely ask questions about automator. Auto-mechanics don't generally need advice on choosing an auto repair shop.
Applescript is probably the easiest way to go with this. I don't know what the file structure of the recovered documents is, but in general you'd run something like this:
set sourceFolderPath to "/path/to/recovered items folder/"
set destinationFolderPath to "/path/to/destination folder/"
tell application "System Events"
set theFiles to files of folder sourceFolderPath
repeat with thisFile in theFiles
try
-- move files one-by-one in an error block
move thisFile to folder sourceFolderPath
on error
-- you can put something here to log the skipped files or display a dialog, if you like
end try
end repeat
end tell -
My ipad gets a black bar over part of the screen then freezes up, please help
Just today my 16gb ipad 2 ,bought in December 2011, started to get a black bar over part of the screen. Sometimes 3/4 of the screen sometimes 1/4 then it freezes up and will not do anything. If I try to reboot it I get a faint backlit only. Any help would be appreciated!
On the iPad tap Settings > iCloud
Toggle Documents & Data off then back on then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the box next to Documents & Data then reselect it then restart your iMac. -
I would like to know how to burn a dvd in such a way that each image can be skipped over by pressing the skip button? If anyone could help it would be greatly appreciated!
Here's how top get a slideshow that will let the viewer manually control the forward and backward movement of the slides with the forward and back buttons on the DVD remote.
1 - put the images you want to use in an iPhoto album.
2 - launch iDVD, select a theme and add a slideshow using the "+" button at the bottom:
3 - click on the Media button at the lower right hand corner of the window and then click on the Photos button.
4 - locate the iPhoto album containing your photos and drag it into the left hand pane:
5 - select Side Duration to Manual.
In order to get the maximum manual control of the slides you cannot have add any music to the slideshow. If you do add music the slideshow will continue you advance unless you pause the slideshow and/or use the advance/back buttons and then pause.
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?
it recognizes the iPOD but I can't get any of the new songs to import to the iPOD
are you getting an error message, Odessa? if so, what does it say? include error message numbers if you're getting any.
if you're not getting an error message, describe what happens when you try to transfer songs to the ipod as best you can. -
I had to wipe my hard drive clean and reload all my programs. After reloading Itunes, I noticed that some songs will not play, they are skipped over, or the songs plays for 1-2 secs then it skips on to next song. Any ideas what I did wrong? All songs played before and some of affected songs are bought, some are my old library I copied off of CDs
TimT wrote:
I had been thinking that the hard dri've is starting to fail on me but then I thought about the fact that, If I play an MP3 and the player freezes up or starts jumping through the mp3 file, Then I restart the player and start the same MP3 agian and this time it plays normally, Is it really a hard dri've problem?
Could be a lot of things unfortunately, from corrupt firmware, corrupt format on the disk, a problem with the mainboard, or a problem with the hard disk.
I figure that if the hard dri've was damaged it would always freeze up on the same file at the exact same point in the music wouldn't it's
Not necessarily. It could be just an intermittent fault.
I want to Format my Zen Touch and reload the Firmware to start from scratch, but I first want to backup my 28 GBs of MP3 and WMA files. However I noticed that when I transfer the files to my hard dri've, all the ID3 Information is gone. Now adding ID3 info to 28GB of files will take days!
Strange. Did you edit the tag data on the player? If so what happens is the tag data changes are made in the Music Library but not in the files themselves. There's only one way to write the changes back and this involves getting a copy of MediaSource 3. You then transfer the files back to the PC Music Library, and use an update function to update the files (the PC Music Library will have the same tag data as the Music Library on the player). One problem is that MediaSource 3 is very large, and not available from Creative as a download. I can try and get a copy to you if you can't find it elsewhere. -
I have purchased two complete albums in the last three weeks, old Bob Seger and new Maroone 5, both have the same issue, only a few songs will play and will skip over the rest of the songs on IPod and on computer????
Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked. This seems to help with partial downloads...
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2 -
My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4
Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
Burned DVDs Skipping over damaged area
My C2D 1,83GHz Mac mini (10.5.2) has problems with burned DVD movies. Both DVD Player and VLC will crash or give an error at some point: *Skipping over damaged area*. VLC will just crash and DVD Player will hang, you can´t pause or rewind.
The movies will play just fine on a standalone DVD Player. Commercial DVDs (not copied) will work just fine also. I´ve been using Verbatim DVD-R dics and the same movies play just fine in my PowerBook G4 and my MacBook Pro. I just got a movie from a friend on a TDK disc and that disc did not cause any probelms on the mini. What could be the problem? Is there a problem with the drive? I´ve tried burning the discs on 3 different Macs but that doesn´t seem to make a difference.I can't help but wonder if this is an issue relating to whatever means has been used to burn the movies rather than the drive or the discs - particularly since commercial DVDs play properly.
It may be, for example, that the software used to rip or duplicate the originals has mis-read the original due to copy protection, and the disc is therefore not copied fully.
Maybe you are looking for
-
No privilages to restore file from time machine
After selecting a file to restore from time machine. it comes back with an error stating "You don't have privilages to access this file." I am the only user and setup Time Machine under my user. Any suggestions would be appreciated. Thanks
-
How to remove/uninstall custom installed perl modules?
Hello all. Yesterday I upgraded from 10.3.7 to 10.4.5, then started to reinstall a bundle of perl modules (via the Terminal and 'perl Makefile.PL -- make -- make test -- [sudo] make install'). As I saw too late, some of those modules I installed are
-
Has anyone had problems synching contacts from iPad?
I have a new iPad, wi-fi only, that I use at my office to add contacts, birthdays, reminders, notes, and calendar items. I do not have wi-fi at my office so I come home to wi-fi so that my day's work will synch to my iPhone and iCloud. Everything syn
-
Preview (or any PDF viewing application relying on Preview) crashes
I am experiencing a very annoying problem when I open a PDF file: most of the characters do not appear (only lines or text written in italic or special fonts appear). After a few seconds, Preview (or whatever application I use to display the PDF, be
-
hi, i have a requirement , While creating Quotation (in VA21 create with reference) in inquiry field (in F4 help) it should show only OPEN Inquiries. for this i have created a Z search help and added to VMVA search help. In my Z search help I have u