Ran update 10.6.8 outlook2011 problems

Ran my updates and now my outlook 2011 will not open. Anyone have this same issue? What did you do to fix the problem?

Though I am using and iMac 27 and not a macbook, I have the similar issues since the 10.6.8 update.
I too am using the adapter to connect to a Philips 42' LCD.
You can see my post here: (has a pic of what my TV image now looks like since update.)
https://discussions.apple.com/message/15488605#15488605
I ended up going back to 10.6.7, not a fix, but no other alternative..
I used to have this problem a year ago on a PC that happened to have the same ATi Graphics card. I just used the ATI control center and changed a setting to YBR component or something like that in some color settings. But unfortunately we don't have the ATI control panel for mac, least I don't think we have any kind of alternative, but would prolly fix it..

Similar Messages

Lenovo Drivers Insufficient for update to 8.1 - Driver problem - H430

Lenovo Drivers Insufficient for update to 8.1 - Driver problem (USB?) - H430
my lenovo H430 is about 6 months old - worked okay with preinstalled Windows 8
After update to Windows 8.1 computer no longer seemed to work well at all, although I am unable to provide hard evidence, but clearly it was not working as smoothly as in the previous 8 version with lots of irritating little problems - including sound.
One thing that very clearly was not functioning as it had in 8 version was the USB disconnect icon. In 8 you only had to click on icon and the USB selection window would open immediately. Additionally all USB connections would be shown - back and front USB. Select the USB to be disconnected and it would be disconnected immediately (providing not in use). After update to 8.1 this was no longer the case.
In 8.1 disconnect icon no longer worked as it had done in 8. After clicking on icon there was now always a lengthy pause, followed by the sound of the computer working (whirring sound) and then after a while the USB selection window would finally open. Sometimes it was necessary to click on icon a few times to get any reaction at all. A small MP3 player I had charged up on my computer every morning (front USB) in windows 8, was always in USB list, and disconnected without problem in 8. In 8.1 it was no longer in list and only charged sporadically (would stop charging, but if I clicked on USB icon it would start charging again - although still not shown in USB list).
After about two weeks of 8.1 my screen suddenly - but only briefly - went black twice. I ran a sfc /scannow. problems were found but could not be resolved. I did a Dism /Online/Clean-Image/RestoreHealth this was reported as being successful. About two days later my computer went into blue screen BSOD - "critical-services-failure" - from which I was unable to get out of. The only option open was the Lenovo restore option. Computer was returned to factory state with los of all data.
back to Windows 8 the computer once again worked okay - no problems - and USB icon once again worked correctly (including with MP3 player).
About 2 weeks later after receiving MS messages to update to 8.1 I called Lenovo support and asked about update to drivers for 8.1.
the following list was given:
Chipset: Intel chipset Driver for Windows 8.1 (64-bit) Version : 9.4.0.1022
Video: CPP2 AMD DISCRETE VGA CARD DRIVER for Windows 8.1 (64-bit) Version: 13.152
Audio: Realtek Audio Driver for Windows 8.1 (64-bit) Version: 6.0.1.7030
LAN: Realtek Lan Driver for Windows 8.1 (64-bit) Version: 8.018.0621.2013
STORAGE: Intel RST Driver for Windows 8.1 (64-bit) - Desktop Version: 12.8.0.1016
I updated to 8.1 and then updated all the above drivers (no USB driver update was available).
The same problems as the last update to 8.1 and USB was as bad as it was in last 8.1
Some days later my computer went into blue screen BSOD once again - although this time did not stay stuck there, and quickly restarted - due to speed of restart I did not get time to read all the text and discover the cause of BSOD.
Computer is still running badly - particularly the USB icon disconnect.
Called Lenovo support but they have been no help!!!!!!!!!!!!!!
Lenovo are failing us with the 8.1 update and the DRIVERS FOR 8.1
BSOD
all i could find was this: (probably refers to after BSOD - the restarting part after BSOD???)
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2013-12-20T08:12:33.642341400Z" />
<EventRecordID>9644</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>myleno</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">209</Data>
<Data Name="BugcheckParameter1">0xb8</Data>
<Data Name="BugcheckParameter2">0x2</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0xfffff8000020170a</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>

I have now seen the suggestion by Tomaspoko and Brillow at http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Windows-8-1-update-S440-ThinkPad-black-screen-wit...
Despite the AMD driver giving an error during install at the last stage of the suggested fix, this has now yielded a working switchable graphics for my S540 for the first time with Windows 8.1. Catalyst Control Center also works for the first time, so thank you to both the above-mentioned posters for a solution that does work.
Hopefully in time AMD will release a non-broken updated AMD driver and CCC package.
Thanks again for a nice solution from this forum - the problem was driving me nuts!

Software Update can't check for updates because of a network problem....after firmware update

I just bought a MBP w/Lion (10.7.4) and ran software update. The first two items I updated were firmware for SMC (ver 1.5) and EFI (ver 2.7) and now my MBP says: "Software Update can't check for updates because of a network problem." However, I can connect to the Internet to surf the web just fine. This is the only update I've made. Can firmware be uninstalled? If I reverted to the image on my external drive that I did with CCC prior to the update, would that fix it?

Hi! i hope i'm able to explain what i worked out and what worked for me. I had the same message coming up "no internet connection, run network/internet diagnosis" etc etc. Internet connection was fine. What i finally did:
Open airport, check internet, internet options ; with me, IPv6 was set as this (the letters are in german order and not in a english order, sorry...):
In system prefs, network/TCP/IP IPv6 was set to "automatic":
I did change the settings in Airport back to "Link Local" and Software Update worked immediately normal whithout restarting the computer.
No idea what changed the settings; however i did run permission repairs beforehand with no connection to any problems, just as a normal kind of 'maintenance routine'.
Hope this helps others, it worked for me.
Cheers
Csico

Security update fixed my last remaining problems!! Woo hoo!!

I ran the security update and now mysteriously all of my remaining issues I've had since updating to 10.4.9 went away. Great news indeed, just wondering if apple puts some system updates in with the security updates?
Here were the problems I was having still after massive amounts of troubleshooting after the 10.4.9 update. But hey, they are gone now!!!
• System freezing up several times a day
• Ichat continually loosing its connection
• certain apps crashing
I'm looking forward to 10.5, I know apple pushed it back, do they have a release date yet? Any word on Ilife 07 or are they skipping that one?
Brown.Recluse

10.5 - October. Don't know about iLife 07.
http://www.apple.com/macosx/leopard/ (bottom of page).
Steve

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

HT204152 I am unable to update my App store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc.

I am unable to update my App store Updations. the reason being billing problem asking to update payment method.Many a times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc....Using ! phone 6plus .IOS8.3

What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?

While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?

We can't help you if you don't even know what you are installing. Never install anything if you do not know what it is. Installings through Software Update always have explanations which you should be reading to see if you actually need and/or want them.
That being said, it appears you attempted to upgrade to Mavarick. Although I am not positive.
Sorry, I am going to back out of this because I nor you know what it was you installed. Hopefully, someone else will chime in here.
GOOD LUCK!

Ran updates, LabVIEW & MAX will no longer recognize my cDAQ?

As stated, I ran updates yesterday through NI Update Service... it suggested SP1, and a couple of others. Ran them, and today my computer doesn't see my cDAQ (9174).
Running...
Win7 Pro 64bit
LabVIEW Professional Ver. 12.0.1f2 (32-bit)
MAX Ver. 5.4.0f0
Tried to run my VI I was working on day before... obviously, if it's not seeing the cDAQ then it can't get data... ran MAX and it still shows up on the list, but doesn't' register as being hooked up. I tried powering it down and back up, rebooted computer, restarted LabVIEW, unhooked the unit from the hub it's normally hooked to and retried everything above with it plugged directly into my laptop.... nada.
I'm at a bit of a loss here. Anyone have any suggestions? I'm going to take the laptop over to my other systems and see if it recognizes any of them.
Thanks!
Chad

Kyle,
Yes, I have taken the hub out of the equation. Correct, I have plugged this laptop into my other control pannels that are running cDAQ's and they are not recognized either.
Other computers question... I have two laptops that I use in lab, the one currently in question (call it laptop1) was working fine until I ran the suggested updates on it... SP1, and some others and that brings us to where we are now. My other laptop (laptop2) was working fine until I started running the suggested updates on it, and now it's doing the same thing.
FYI, I have a support ticket open with NI, (Ref#-7383377).... Leah, has had me uninstall the DAQmx drivers and install the newer drivers... still no recognition in MAX and now my computer doesn't chime when I plug in the unit directly.
Nor does the cDAQ show up in the device manager anywhere.
Tried something....
I have a spare cDAQ that hasn't been used yet.. I plugged it in and it seem to recognize it until I ran MAX and it doesn't show up in there either. It did chime when I plugged it in, and it told me it was installing drivers.... Seemed to work for a second, but now it's telling me that it's an "Unknown Device" under the Universal Serial Buss controllers.
Still no joy in the device manager with my original cDAQ. I plugged in the spare, it did it's thing... I unplugged it, and plugged the original back in, I got a chime, but no recognition... after that, no more chimes and doesn't show up in the Device Mngr at all.
Other ideas?
Thanks!
Chad

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

IPad update Error- There was a problem downloading the software for the iPad .... network settings

"iPad update Error- There was a problem downloading the software for the iPad X you do not have enough access privileges for this operation. Make sure your network settings are correct and your connection is active, or try again." is the error. The rest of iTunes, sycning, and ipad operations work. I am on OSX 10.6.8. iTunes is the most recent addition.
I've been having this problem for a while but it has yet to go away. Any help please?

OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

TS1702 I did all of the above recommendations and still Biblexpress is not working. Should not the developer have an update to care for the problem?

I did all of the above recommendations and still Biblexpress is not working. Should not the developer have an update to care for the problem?

You should contact the developer directly to inform them of any issues.
There should be links in the App and if not, there should be links
to the developer's site and support in their presentation in the App Store.

HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.

Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.

Why won't 'Address and Search' from 'Customize Toolbar' box 'stick' when I drag it to my toolbar? I ran updates last night, and my Google searchbox disappeared and I can't get it back.

Why won't 'Address and Search' from 'Customize Toolbar' box 'stick' when I drag it to my toolbar? I ran updates last night, and my Google searchbox disappeared and I can't get it back.

Safari 6 ?
URL address bar and Google search field are combined together in Safari 6.
Apple calls it Smart Search field.
There is no way to separate them.

I always update my iPad without any problem , but this time for the iOS 7 , it is still downloading from yesterday more than 24 hours and as a result I can't open any email . So can you help me or tell me what went wrong

I always update my iPad without any problem , but this time it didn't work out . My iPad 4 is still downloading from yesterday and I can not meanwhile open any website or any mail . Can you tell me what went wrong ??

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Ran update 10.6.8 outlook2011 problems

Similar Messages

Maybe you are looking for