Ran updates, LabVIEW & MAX will no longer recognize my cDAQ?

As stated, I ran updates yesterday through NI Update Service... it suggested SP1, and a couple of others. Ran them, and today my computer doesn't see my cDAQ (9174).
Running...
Win7 Pro 64bit
LabVIEW Professional Ver. 12.0.1f2 (32-bit)
MAX Ver. 5.4.0f0
Tried to run my VI I was working on day before... obviously, if it's not seeing the cDAQ then it can't get data... ran MAX and it still shows up on the list, but doesn't' register as being hooked up. I tried powering it down and back up, rebooted computer, restarted LabVIEW, unhooked the unit from the hub it's normally hooked to and retried everything above with it plugged directly into my laptop.... nada.
I'm at a bit of a loss here. Anyone have any suggestions? I'm going to take the laptop over to my other systems and see if it recognizes any of them.
Thanks!
Chad

Kyle,
Yes, I have taken the hub out of the equation. Correct, I have plugged this laptop into my other control pannels that are running cDAQ's and they are not recognized either.
Other computers question... I have two laptops that I use in lab, the one currently in question (call it laptop1) was working fine until I ran the suggested updates on it... SP1, and some others and that brings us to where we are now. My other laptop (laptop2) was working fine until I started running the suggested updates on it, and now it's doing the same thing.
FYI, I have a support ticket open with NI, (Ref#-7383377).... Leah, has had me uninstall the DAQmx drivers and install the newer drivers... still no recognition in MAX and now my computer doesn't chime when I plug in the unit directly.
Nor does the cDAQ show up in the device manager anywhere.
Tried something....
I have a spare cDAQ that hasn't been used yet.. I plugged it in and it seem to recognize it until I ran MAX and it doesn't show up in there either. It did chime when I plugged it in, and it told me it was installing drivers.... Seemed to work for a second, but now it's telling me that it's an "Unknown Device" under the Universal Serial Buss controllers.
Still no joy in the device manager with my original cDAQ. I plugged in the spare, it did it's thing... I unplugged it, and plugged the original back in, I got a chime, but no recognition... after that, no more chimes and doesn't show up in the Device Mngr at all.
Other ideas?
Thanks!
Chad

Similar Messages

HP Photosmart 8250 will no longer recognize photos downloaded from Facebook. Any ideas?

I used to download and print photos from Facebook, but the HP Photosmart 8250 will no longer recognize these files on the SD card. I believe Facebook recently updated it's photo format (incidentally, older images on Facebook still work fine). Any ideas?
I'm running Windows XP, and have not changed anything on my setup.

The troubleshooting steps in this document may help resolve the issue of black not printing. If not see the post here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

MacBook Pro will no longer recognize new SSD via USB

I just received a brand-new 512 GB Samsung 840 Pro SSD from Newegg this morning.
I own a 15-inch MacBook Pro (Mid-2012) with 16 GB of RAM and a 2.3 GHz Core i7 running Mavericks (10.9.1).
Earlier today, I plugged in the SSD via a third-party USB-to-SATA adapter that I also purchased from Newegg at about the same time. The machine recognized the new drive, and I opened up Disk Utility to format the drive as Mac OS Extended (Journaled).
Once that finished, I used Carbon Copy Cloner to clone my existing HDD to the SSD. Before it began, the program asked me to create the Recovery HD, so I enabled that option. The rest of the process proceeded smoothly. I quit CCC, ejected the drive, and put it away for the rest of the workday.
When I arrived home tonight, I plugged the SSD back into the Mac in hopes of test-booting it externally. Unfortunately, the machine will no longer recognize that anything is plugged into the Mac. I find it highly unlikely that the USB adapter could be malfunctioning; I unboxed it this morning and it's been mere hours since the successful clone attempt. I also find it hard to believe that the SSD could be broken, either.
I tried to disable rEFIt and manually invoke the boot selection screen, but even when that happens, the drive fails to mount. For the same reason, I can't erase the drive to start over, either. I've tried both USB ports, as well as rebooting with the SSD connected and unconnected.
My research tells me that people often have problems trying to get SSDs to boot when they've been installed in the drive bay, but nothing I've seen suggests anyone's had a problem booting from the external SSD after a successful clone attempt. What am I missing?

I'd start by resetting the SMC. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964
I have no experience with Samsung SSD's, but I've read a number of posts here of people having problems with some of them. That could be a possibility.
The other thing you could try at this point is to swap the drives. If it's cloned already and the drive is good, it should boot. That would indicate the enclosure failed after the copy.

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

After installing the most recent iTunes update/version iTunes will no longer run on my PC. I receive a window with the Microsoft error code R6034

After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

My Note 2 will no longer recognize my SD card after 4.3 android update

After the 4.3 update my phone recieved yesterday my SD card will no longer work. I have a 32 GB ScanDisk Ultra SD card. I will either get the error messages that it is blank..which it isnt I can view the files on my computer using an adaper. Or i will get a message after I insert my card saying it is preparing my SD and checking for errors and then another message will come up saving I can safely remove my SD card. In the storage settings it gives me the option to mount my sd card and when I select it my phone freezes and then crashes. Any advice? This is really starting to get irritating..especially when i know there is ntohing wrong with the card.!

see if this helps:
Re: S4 not reading the SD card after the Android 4.3 update?

Iphoto will no longer recognize my camera, says it does not recognize the format....they are jpegs? And now it will not even open when I plug my Canon Eos Camera in to download. I have checked everything on the camera and it is working perfectly....

Iphoto will no longer open when attaching my Canon Eos Camera. I have checked the camera and everything is working perfecty. When I open it myself, Iphoto is working perfectly too. But now when I attach the camera, Iphoto no longer opens at all. Yesterday it did open after a really long wait but it kept saying that it did not recognize the "format" of the images....they were jpegs??? Then it flashed on and off and if I hit download at just the right second they would download. But today it won't work at all. Any suggestions.
thanks

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

IPad2 update to iOS6 will no longer play UTube: All my favourites that were previously viewed and saved with my iPad2 will no longer play. They can't be played via Safari either SOLUTION PLEASE (buy iPad3 which solves the issue isn't an option)

IPad2 has been updated to iOS6 and will no longer play UTube favourites. These are favourites that have been previously viewed on iPad2 therefore I know the device is capable of playing them. This upgrade is no longer allowing me to use the device for the reason I bought it.
Apple, I'm feeling as though I've been conned.
My mates iPad3 on iOS6 plays all the stuff my 2 will no longer play.
UTube via safari won't play them, all Apps I've tried have the same problem, a red band stating this video can't be played on your device OR flash player required. Has anyone got a solution???? Please don't write stating you have the same problem, I just want solutions. Thanks

https://itunes.apple.com/us/app/jasmine-youtube-client/id554937050?mt=8
This app should solve your headache

How do I fix my 3gs after 6.1.3 update? It will no longer send / receive group messages and won't send pic text messages either.

Ever since I updated my 3gs (on ATT) to 6.1.3, it will no longer send or receive group texts, and it won't send picture messages
(though I seem to be able to receive picture texts). I've looked around on the boards, and here's what I've tried so far (to no avail):
1. Tried simply turning off / on
2. Tried hard reset
3. Tried having imessages off
4. Turned group messaging off / on (tried while it was off)
5. Turned off all messaging, turned phone off / on, turned all message settings back on
6. Reset network settings
Help! Argghh!!! I never had this much trouble when my previous phone was jailbroken! Here I am, trying to be good!

Thanks, Nick. Calling ATT is a last resort; it's a software issue, I'm sure, and I've also found other
people having the same issue, but none of the fixes work. I reset all my settings: nothing. I'm not sure what you mean by restrictions.

Itunes will no longer recognize my phone

I just bought the iPhone 5c. When I plugged it in to my old itunes it synced all of my old music. I wanted to start fresh so i made an icloud account and deleted all of those songs. I then signed on with my new account. After this, itunes will no longer display my phone as a device. I tried everything from reinstalling itunes to checking the Apple Mobile Device services and still nothing. Can someone please tell me what I did wrong so I can get some music?!

1-reinstall itunes(to last version)
2-reset all setting from settings(on iPhone)
3-change port of usb to your Computer
was it helpful?

TS1398 One IPOD will choose a network for wi-fi and the other IPOD will no longer recognize the same wi-fi in my home, why?

I have an IPOD touch that will no longer connect to my wireless router at home or anywhere else. The other IPOD touch is still using the router at home. The last time the IPOD was using a wi-fi was a week ago at a school to text a message.

- Does the iPod see the network?
- Is this your problem?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
- Any error messages?
- Reset the iPod . Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

I have an iPod touch 32gb 3rd gen (model A1318) and am unable to update it to iOS5. When I try, I have to update iTunes first, and when I do that, it will no longer recognize my iPod (so I can't update the iOS). Help?

If it matters, I'm using a PC that's still running Windows XP, but this isn't my first rodeo, and I know both how to use the software and what applications are and aren't compatible with my computer.
I searched the web for answers, most of which amounted to a shrug and a "Meh." I called Apple support, who took a couple days to look into it, then had a supervisor call me back. His response, essentially, was a shrug and a "meh." So I'm kinda stuck. Any help you folks could give me would be much appreciated.
In addition, I've been reading a fair amount on how iOS 5 will cause a whole host of problems with the 32gb 3rd gen touch... is this true? And has Apple resolved it, or are they essentially force-retiring this model?

Dear Re_trace,
Don't you feel cheated and conned by this product. I am 50 years old and from what you write I can see you know a lot more about your computer than I do about mine. Additionally I live in southern Africa (in fact I live in one and work in another, neither of which appear on the drop down list when you start looking at asking Apple directly for help) and feel they shouldn't allow people to sell their products here (I bought it in a shop that sells i-Macs etc. - not off a guy on a street corner!)if they can't offer support.
I have just been going from error code to another, losing my music that took me hours and hours to install and catalogue/modify in the library etc. and now I've had enough of it.
Essentially it seems to me we have bought faulty products, and made Apple richer than Microsoft in the process.
I'm turningmy back on this bloody iPod Touch, giving it to my son to see if he has the ability and interest to get it working, and if he hasn't I'm just goinbg to have to sell it to a sucker who also wants to buy into the dream, until he wakes up to the reality of shoddy product. hours in front of a computer screen, a fortune in downloads (here I only have about 5 to 10 kb per second download speed), trawling the internet looking for people than have also suffered at the hands of an obviously fatally-flawed system.where every time Apple just recommends to install the latest version of iTunes.
I for one would rather have my money and my wasted time back............
I know I didn't help, but really I don't have any axe to grind against Apple, it's just that the hype in no way lives up to the reality. Look at all the people begging for anwers to their problems on this web-site! I know the shop in Mozambique won't give me my money back, but Apple should, and if Ford sold cars as reliable as these iPods, they'd be banned from selling them........
Or am I just too old to realie how exciting it is internettingf all over th eplace to try to fix what is actually an inferior Walkman........
Good luck solving your problem, and I hope you think that all the effort you are putting in (and which I have now given up putting in), is worth it.
Hope you solve ht eproblems!
Nick

IPhoto will no longer recognize my iPhone and auto download images since updates, help, I use this non stop for online business which has been halted

imac with latest updates / iphone 5 , worked previous to iphone recent update , had to rebuild the photo library first now it downloads nothing new when i plug in the phone to the imac

Try this possible fix:
Robin Johnson
This solved my questionRe: ios update problem - 7.1 11D167 iphoto not picking up new photos
Mar 20, 2014 7:15 AM (in response to JdinPa)
I figured out the fix for the Mac users having this problem. I connected my iPhone to my iMac and started iTunes. A dialogue came up in iTunes, I OK'd that and then OK'd the usual "Do you trust this Mac" that comes up on my iPhone.
Suddenly Image Capture launched itself and there were all my photos, ready to be downloaded.
As a workaround see if Image Capture can see and download your photos to a folder on the Desktop. They can be imported from there into iPhoto.
OT

Itunes will no longer recognize my 5th generation ipod

Itunes will not recognize my ipod (running Windows Vista. My sons' iphone does not have a problem so it is probably my ipod.
Out of date software on the ipod, perhaps?

Did this iPod previously work with this computer (and the current Windows installation), and it is no longer working for some reason? Or is this the first time you are connecting this iPod to this computer?
I would try doing a reset of the iPod while it is connected your computer.
http://support.apple.com/kb/HT1320
Even if the iPod's software is out-of-date, it should still be recognized by iTunes.

Update 1.0.1 no longer recognizes Apple Bluetooth headset

Interesting, after applying the update I now receive the following error message when connecting my new "Apple Bluetooth headset charging connector with the headset adaptor inserted into the charging port"
This accessory is not made to work with the iPhone
Would you like to turn on Airplane mode to reduce audio interference (you will not be able to make or receive calls)?
Also, the iPhone no longer indicates that the unit is charging the Apple Bluetooth headset.
Further, I am unable to use my Bluetooth headset. General settings indicates that it is paired but will not allow me to use my headset WHICH I ONLY RECEIVED YESTERDAY! Worked fine prior to the update.
Pitiful update release on Apples part. I am very concerned that Apples QA deployment is lack-luster.

AH HA!
I figured it out. I unplugged the cable from the usb port on my macbook pro and re-inserted it. voila! it now works.
despite removing the plug-end that goes into the iphone made no difference. removing the cable entirely from both the iPhone and macbook pro fixed the problem thus far.

Ran updates, LabVIEW & MAX will no longer recognize my cDAQ?

Similar Messages

Maybe you are looking for