Ran "Verify Disk", and gave me an error i don't know how to fix
Here is the error message that comes back after I do the Verify Disk.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Illegal name
Checking multi-linked files.
g Catalog hierarchy.",0)
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Checking volume information.
id volume free block count",0)
(It should be 39891409 instead of 39891403)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
It says i need to repair, but it won't let me hit the repair disk option. Any help for a Mac loving noob?
Hi, H.
It sounds like you ran Live Verification, i.e. used Verify Disk against your startup disk while booted from such. One can Verify, but not Repair, the current startup disk.
Run the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
If Disk Utility still fails to repair the disk, see the "Disk Utility cannot repair the disk" section of that same FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Similar Messages
-
Has anyone ever had the icons on the menu magnify? My phone slipped onto the floor in my car and icons are now hugh. Don't know how to fix it.
Double tap the screen with 3 fingers.
Stedman -
Error #1009 - don't know how to fix
Hi everyone,
I'm new to flash and specially to AS3 and I'm getting this error message:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at VIDEO_FINAL_02_fla::MainTimeline/frame1334()
And strangely enough it works in mw SWF&FLV Player and in Safari or Firefox!!! The button just doesn't work with flash player - and I need it to work in this player.
It's a simple educational video - it starts with a movie, then it stops and you have to click in a button that leeds you in to some text about a subject. then you click 'continue' and you continue watching tnhe second video - and so on (7 buttons and vídeos). - It's very linear.
Here goes the the code of this frame:
stop ();
myLIVRO_BOTAO.addEventListener(MouseEvent.CLICK, livroPressz);
function livroPressz(e:MouseEvent):void {
gotoAndPlay("LIVROa");
I can't understand... I gave this button (LIVRO_BOTAO) an instance name (myLIVRO_BOTAO) on the properties tab.Forget it..
I just found the answer in another website.
You shouldn't have movieclips inside buttons - and that was the problem...
I've just tried and it worked!
You just have to include a line before the rest of the code:
myButton = SimpleButton(getChildByName(myButton))
myButton - name of your button.
Thank you anyway. -
Error I don't know how to fix myMessage.text
Hi,
I am getting an error on the below piece of code, the error is showing on the myMessage.text:@"hello xcode";
can anyone see where I'm going wrong?, I am following a self teach manual. Thanks in advace.
UILabel *myMessage;
myMessage=[[UILabel alloc]
initWithFrame:CGRectMake(25.0, 225.0, 300.0, 50.0)
myMessage.text:@"hello xcode";
myMessage.font=[UIFont systemFontOfSize:48];
[_window addSubview:myMessage];
[_window makeKeyAndVisible];
return YES;I have no errors now but am getting a white screen on the simulator, can anyone help out?
UILabel *myMessage;
myMessage=[[UILabel alloc] initWithFrame:CGRectMake(25.0, 225.0, 300.0, 50.0)];
myMessage.text=@"Hello Xcode";
myMessage.font=[UIFont systemFontOfSize:48];
[_window addSubview:myMessage];
[myMessage release];
[_window makeKeyAndVisible];
return YES; -
In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message
This helped me.
Go to Start -- Accessories -- Command Prompt, make right click and choose run as administrator
Type this command : netsh winsock reset
then restart your computer, everything should be ok after this. Good Luck. -
Disteller error 5 and i don't know how to fix. can anyone provide guidance?
disteller error 5 and i don't know how to fix. can anyone provide guidance?
What version of Distiller Server do you run? Or is this the regular Distiller, on a server? What triggers the error?
-
I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694 -
hello,i have a macbook pro and i just recently downloaded facetime, and now i cant use it, it says An internal FaceTime error occurred,i dont know how to fix it, please help.
If your webcam is powered by USB, make sure it is attached directly to your Mac and not a USB hub. In my case, I had my Rocketfish webcam attached to a peripheral USB hub and it wasn't drawing enough power to operate at capacity. Therefore, Facetime was quitting on me and giving me that exact error message. Once I attached the webcam directly to my Mac USB port, problem solved. Hope that helps.
-
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am trying to update my iPhone 4s to IOS 1.6.3 but everyone I update it it says error but I don't know how to fix this error!! HELP!!!
That sounds like a possible security software issue on the computer you are using, or are you trying to do the update via the phone OTA?
If you are trying to do it OTA, you might want to connect the phone to the computer and iTunes and attempt the update from there.
BTW, the update is iOS 6.1.3. -
Hello,
I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?I found this solution http://objcsharp.wordpress.com/2014/09/21/how-to-get-back-the-ios-7-sdk-after-up grading-to-xcode-6/
-
I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.
Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess. -
My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .
T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Maybe you are looking for
-
when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP. Also when i take th
-
Weblogic 11 works with JVM 1.7?
Hello everybody Anyone know if it supports installing weblogic 11 with the ibm jvm 1.7? Thanks.
-
Wifi (Airport) problems with 1.67Ghz Powerbook
My Powerbook gives me problems on wireless networks. It starts off with a full signal which starts dropping after about 3 - 5 minutes, and then suddenly shoots up again to full and sometimes cuts out completely and then comes back to full signal. The
-
Hi, Just wondering , is there a way to create a fillable PDF form using Crystal report 2008? Thanks
-
hello all, While taking Stores Inventory we have found the material with 0.003 stock and Value 90000000.00. We want to remove this stock from System and system not allow us to remove the stock