Random and Continues Rebooting

Hello, I've had a BB 8220 for 6 months but for the last 2 o 3 weeks it reboot several times during the day sometimes in cycles that last for several hours. When it started it had the original OS and no 3d party applications. So far I've tried the following without results:
1) Use another battery
2) wipe the OS and instal the updated version
3) taking out the media card and even the SIM card
4) Checking the memory (is ok, the hidden log was wiped too)
Please let me know if there is anything else I could try or I should just give up and get another phone even when I have no warranty =( .
Thank you

If your device is under warranty consider the device replacement.
There is something wrong with the device.
If device is not under warranty take it to service center for diagnostics.

Similar Messages

Random and frequent reboots

Hi, I pre-ordered a N900 two months ago. I finally got it yesterday, and since then I've been experiencing random and frequent reboots of the device. I don't have to do anything fancy, it simply reboots from time to time without warning. It's a real pain.
This is being discuss in the maemo website [1] and there's two bugs [2] & [3] open on this issue. I'd like to know if I should return the device as many are doing or if I should wait for a prompt firmware upgrade. I don't want to wait another two months for a replacement (I think the supplies are a bit short due to high demand) but I don't want to stick to a possible erratic hardware.
Please Nokia, give me some advice. Thanks.
[1] http://talk.maemo.org/showthread.php?t=35055
[2] https://bugs.maemo.org/show_bug.cgi?id=6334
[3] https://bugs.maemo.org/show_bug.cgi?id=6350

I have N900 for almost a month, and rebooted me once. I started installing an application, canceled, when i tried to install it again rebooted. After reboot i tried to install same application, worked fine.
I'm using firmware version 1.2009.42-11 atm, works better with multitasking then previous version. Even with previous firmware, NEVER froze and rebooted once (i think thats pretty awsome for a brand new OS). It has amazing stability, and trust me, i use it A LOT, and 80% of the time i have it online.
Rodolfo Rangel

Kinect extremely laggy and continually reboots until I run Kinect Studio 2.0 in the background.

I'm relatively new to developing with the Kinect v2 sensor. I'm having a problem where the sensor is extremely laggy (1 frame per 5-10 seconds) and will continually reboot every 10-15 seconds. It's doing this in the ControlsBasics-XAML project that came
with the SDK as well as any other Kinect app.
I found a strange workaround that makes it run extremely smooth. If I just open up the Kinect Studio v2 application (comes with the SDK) and leave it running in the background, then it makes any other Kinect app run smoothly.
I have the latest nVidia drivers, running Windows 8.1 and DirectX 11. Any ideas what the problem could be?
Thanks,
Mario Suau

Your system is running in low power state and you need to ensure that the CPU has fully power to run the Kinect. Check the troubleshooting guide sticky(last post) on the main forum page:
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
Carmine Sirignano - MSFT

Random and Frequent Rebooting

Oddly enough my Curve 8530 is constantly rebooting....like several times a day. Does it randomly if I'm on a call (it kills the call) or entering a text or calendar entry. Sometimes it can't even re-boot until I take the battery out and let it sit for a few minutes. Upon finally rebooting all the battery is gone.
I've done a security wipe and the issue still is occurring. Possibly an application that is causing this ? If so, how does one identify the culprit ?
Thanks for any suggestions.

It could be a damaged cable. If it came bundled with something else, some cables are only designed to charge or work with a specific device.
Check firewall and any security software installed on your system
Beyond that, you will need to take it to Apple

IMac G5 (no iSight) random yet continuous reboots

Hello,
I've purchased in 2005 the new iMac G5 through the Apple Store.
At first everything was doing great. I was using it only for my personal usage, since I had been given a PC laptop for work.
I started using it less & less (no time, too much work) until about a couple of years ago.
But, since then, I've noticed it has a wierd behavior: it keeps rebooting (sometimes during startup, sometimes just after the desktop appears, sometimes 5 to 20mn later - there's no rule).
It just seems to reboot less often once it is warmed up...
It might be linked to the repair extension campaing that Apple set up but also closed in 2008.
I am surprised I have never been warned nor contacted by Apple despite purchasing the iMac directly from them and, furthermore, along with an AppleCare 3 years contract...
Could someone let me know if:
1) this problem could be linked to this known problem (so far, I've read that the main consequence of the power supply problem was that the iMac wouldn't start up at all);
2) if there's a way I could still get the iMac repaired through this repair program although it is now closed
TIA,
Manu

Hi Manu - I'm afraid the repair program ended years ago.
Try resetting the SMU:
   1. Shut down the computer.
   2. Unplug the computer's power cord.
   3. Press and hold the power button for 5 seconds.
   4. Release the power button.
   5. Attach the computers power cable.
   6. Press the power button to turn on the computer.
Then open the back of the Mac and check the caps (little soda cans) to see if they are leaking or if their tops are not perfectly flat.
Let us know how you make out,
Miriam

Has anyone else experienced blue screens and continuous reboots on 5S

I picked up my silver 5S 32 GB at the Verizon store Friday morning. Throughout the morning I noticed that I would hit the home button and it would be powered down. I loaded the .1 patch assuming maybe it was a glitch. I went through the rest of the day with a couple more home button/powered down situations. When I got I home, I plugged it in to iTunes to recover a backup and following the restore it went into blue screen reboot cycle. I performed the soft reset and restored the backup 3 times with the same results. The soft reset was the only means to stop the reboot cycle. I then tried 3 times doing a restore from the cloud with the exact same results. Finally I did a from scratch install thinking my backups were bad. It would stay up awhile but then eventually go into the blue screen and reboot. Sometimes the cycle wouldn't occur in that it would boot up to Home screen following the blue screen. I took the phone to the Apple store the next day, they looked it over, witnessed the blue screen and confirmed there was an issue. I then went to the Verizon store and swapped it for a Space Grey 32GB. I experienced the exact same cycle with the grey so I called Apple. I have spent 3+ hours working through this with a very helpful agent. Turns out a have 2 bad ones in a row! The way I can almost instantly get it to go to blue screen is clicking the Photos icon. Now I am waiting on a second replacement at the Apple store. We have done the soft reset, the hard reset, and the phone restore so we know now that the backup had nothing to do with it as I can do a restore and still have it blue screen after clicking Photos. Anyone seeing anything like this?

Searching for others who might have the same problem increases your chance of finding a solution. Common sense in troubleshooting devices dictates you look for others who might have the same problem in hopes someone already has a solution. Your comment is irrelevant and leads one to think you are spoiling for an argument. Why???

PT 880 neo shuts down randomly and wont reboot.

Hi I have a major problem here. My computer will randomly shut down and then try and re-boot, the only thing is that it wont... it wont even load the bios, it just sits there with a black screen. To make it boot again I have to take the Ram out or video card, push power turn it off and plug the ram or video card back in. Then it will boot up fine. That is untill it will do the same thing and just randomly shut down. Sometimes it will be days and somtimes its minuts between this procces. I have the latest 1.8 bios and My pc used to run perfect, that is before I upgraded it.
My pc ran fine for about a month and then I upgraded some parts. DDR 2300 2x512 upgraded to DDr 3200 2x512 a 9800pro upgraded to 6800GT and a 3.06 northwood P$ upgraded to 3.2 Prescott P4.
My PSU is 50watt my mobo is pt880neo lsr.
MY brain is fryed and I dont know what is wrong! do I need a new mobo? new ram?
what is wrong I have never heard of such a wierd problem.
btw my ram is Geil value ram (its on the suported list)
Sombody please help me I am loosing my hair.

So far so good about ram voltage, but please spec. 3,3 / 5 /12v + Brand/model ( read from PSU label ).
values from bios/software reading is not always what the psu give under stress.
You may also need to run memtest86, to secure that memorymodules are fine.
http://www.memtest86.com/#download1

AE Dropping all connections randomly and then rebooting.

The problem I am having is my Airport Express will randomly drop all incoming and outgoing connections. This usually happens when I am running AirPlay via my AppleTV and using the internet at the same time. I only have a 1Mbs/s speed. I was watching American Gangster yesterday and redownloading my music on itunes, and suddenly it drops and gives the "You need to be connected to home sharing" then it switches and says I am not longer connected to the internet, then a few moments later it connected again. This IS the AE right? It has to be if the internet is cutting out as well, it wouldn't be just the Mac's Airport card. Should I just get it replaced?

Here you go. Thank you
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
6.1 dB / 5.8 dB
Line attenuation (Down/Up)
27.5 dB / 13.5 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
11
Loss of Signal (Local)
1
Loss of Power (Local)
0
FEC Errors (Down/Up)
223864 / 0
CRC Errors (Down/Up)
6 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
15
I should also mention that I have already tried changing the channel using inssider to one not currently in use without success.
Cheers

AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly

I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
Audio breaks/stops and continue playing randomly when 'Ram Previewing'
It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
Steps to reproduce BUG / issue:
1. create a new composition with a length of for example 5 minutes.
2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
4. insert the wave file in the earlier created composition which contain the animated solid or video file.
5. Set the work area bar (preview range) for the whole composition.
'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
AE has to stop rendering because there is no more space available in RAM.
make sure 'from current time' checkbox is off.
6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
(less then the green cache indicator on the right side)
8. "Purge image caches" or "Purge All"
9. Ram preview the now smaller work area
10. listen to the audio. The audio breaks are gone! (***Workaround***)
Additional information:
I have the latest After Effects CS5 update installed (10.0.1.19)
This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver, ASIO DirectX Full Duplex Driver)
I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
Reducing the amount of RAM which After Effects can access didn't solve the problem!
System:
Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
I also turned off AVG Anitivirus and Windows firewall for testing without success.
AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
Any help would be nice!
Felix

Yep, I agree with craulmedia....
It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
I bumped up this post 2 times and thanks to craulmedia for the third time.
And now here is my fourth time *BUMP*
All I got so far is: "I saw your bug report it's in the queue"
Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
But it started out so good in the first time...
Last 2 things I want to add here:
1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max.

My Mac G4 came unplugged while running and now when I start it up all I get is a continuous reboot loop.

While sliding my Mac G4 tower out from under the desk it came unplugged. It was running at the time. After plugging it back in all I get is a continuous reboot loop. I have tried the Shift and the Command Option P R boots to no avail. What am I missing here? I have had no problems in the past with this system. I am running Panther.

I have tried the Shift and the Command Option P R boots to no avail.
Are you using an Apple keyboard or something else. It is rather common for non-Apple boards, especially those pulled from a PC, to not respond to the traditional Apple startup key command combos.
Take the computer off wall power again then press and hold the power button for about 20 seconds. Then restore power and try a normal start. That worked for me when I had a similar failure to start with my G4 MDD.
If you have never replaced the internal backup battery ("PRAM" battery) it is, by, now surely extremely dead and it could not preserve the needed start parameters when power was unexpectedly cut. If you get the computer going, consider installing a new PRAM battery so you won't replay today's issues. tomorrow. The batteries are cheap and replacing one is a three-minute at-home job:
NewerTech 3.6v Lithium 1/2 AA PRAM Computer Clock Battery

Continual reboot and device driver missing

Hi, I have a t400 installed with both win7 and ubuntu 11.04. The system suffers from continual reboot, basically when I shutdown the machine, it automatically and forcibly get rebooted.
I have followed some instructions on the web, and there is a device driver missing, which is PCI simple communication controller. I have tried download AMT package, which does not work for me. It gets stucked in a terminal saying that I need insert TN33, which I dont have. My t400 type is 7417. Any comments are appreciated.

hey tristartom,
continuous reboot occured after installing ubuntu yes ? could you remove ubuntu and have your unit on a mono-boot with windows and see if the same error occurs.
if it doesn't happen, then i suggest heading to Ubuntu forums or the Linux thread in this forum and check with other linux users if they have experience this same issue as you.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Audigy LS stops random and functions properly after reboot

:Audigy LS stops random and functions properly after rebootM I am on a P5P800 motherboard with a SB Audigy LS in PCI2, running Windows 7 Beta and using version 5.2..200 of the driver.
I had the same problem on Windows Vista (both before and afer SP):
? at irregular intervals the sound card stops working. Mediamonkey does not detect the SB speakers anymore and none of the other programs can get audio to play.
All it takes is a system-reboot.
I know there is a later version of the driver, at least drivermax tells me there is a newer version. Trying to install this newer version results in the blue screen.
Any ideas where to look for the solution: I am sure that the chipset drivers are fine and I also tried switching the sound-card in from PCI3 to PCI2.
Help is wellcome: it is annoying most to have no sound randomly !

Restart the computer.

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

I have the Iphone 5, and it shuts off randomly and the screen glitches. I have taken it into verizon and had it reset but the problem still continues. Is the only way to fix the problem to get a new phone?

I have the Iphone 5, and it shuts off randomly and the screen glitches. I have taken it into verizon and had it reset but the problem still continues. Is the only way to fix the problem to get a new phone? Also, why is it if I do need a new phone I can only get a refurbished one when I am paying insurance every month?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation.

HT5361 I can't shut down my computer because it says mail is open. It says to close mail and continue shut down. Problem is I can't open or close mail now. Can't shut down my computer at all. What can I do?

I can't shut down my computer because it says mail is open. It says to close mail and continue shut down. Problem is I can't open or close mail now. Can't shut down my computer at all. What can I do?

If you cannot get mail to quit/force quit, you can always remove power from your Mac.
NOTE: removing power is a bad idea, and can result in data loss, but sometimes it is the only thing left to do.
Press and hold the power button for 5 to 10 seconds, and the Mac will power off.
When you power back on, the Mac should reboot.

Random and Continues Rebooting

Similar Messages

Maybe you are looking for