Random audio corruption after running processes

I have an audio voiceover session I have run hiss reducer on. Everything is fine for a few minutes as I add silence where I need it and bounce out individual files. Then, all of a sudden, everything will become corrupted and full of loud static. I have to close out of the session and re-open it. I am moving between a spreadsheet and audition while I am bouncing files. But I don't see how that could be the problem. Any thoughts? What are my troubleshooting steps?

It does seem to happen when I leave Audition for an extended period of time
(to check email or something) and then come back. For instance, it will
probably be messed up when I go back after finishing this reply. I have to
have the spreadsheet open because it's where the file names are, and it
would be a huge pain and take way too long to hand type all the filenames
into Audition. So, I guess the answer is to limit the amount of time I
spend in other programs while I'm editing a session.
Any idea why this happens or if there is a way to fix it?

Similar Messages

PSI - Budget Field is not getting after running Process Update Summary Bal

Hi,
I have a project with Budget being created through Financial Plan types. After Baselining the budget and performing Actual Transactions, i run Process 'PRC: Update Project Summary Amounts for a Single Project' and 'PRC: Update Project Summary Amounts'. System updates Project Status Inquiry - PSI with Actual Transactions but Budget field is getting updated and it keeps on showing as Zero Budget.
Whereas when i create project with Budget Entry Method and not through Financial Plan Types, PSI is correctly updated after running these processes. Is PSI budget field intended for Budget Entry from Application Based Forms Only or there is something else i need to do get the PSI Bidger field updated.
Thoughts on this would be highly appreciable.
Zeeshan

Hi Dina
Thanks for your reply, please confirm what i have to do in order to populate the data to PSI from Financial Plan.
Zeeshan

Error in PSA after running process chain

Hello All,
I have ran a process chain, which came back with an error. I have checked the PSA and there is one line which has an error. How can I resolve it and reload the data into the cube succesfully? Is there away to delete the data from the PSA and reload it?
Thanks,
Nick.

Dear Nick,
I will add the step by step procedure to edit PSA data and update into target (request based).
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
Hope it helps you,Revert me back if you have any queries
Assign points if helpful
Regards
Bala

How can I navigate to a new page when after-submit process running proc

I have a long running procedure and would like to provide the users with an animated gif to indicate progress that updates a description line to indicate the current step in the process.
Currently I have a couple pages in this application in which a stored procedure in a package is called which performs a long-running process which updates progress in a table. These processes have a single parameter argument. In these cases I call the procedure via the Job Scheduler as part of my After-Submit process and the page navigation jumps to another page which shows a graphical representation of % complete based on the progress updates in the table and refreshes itself every 5 seconds until the job is complete. This works fine.
I am now running into an issue where I have a more complex set of processes, with a number of parameters. To resolve this I used the same process as above, however, I first check to see if the process exists in the Job Scheduler, if not I create it. I then set all of the parameters and tell the job scheduler to execute the procedure. This should work similar to the process I am running on the other pages, however, in this page where I have multiple parameters and send an execute command rather than an execute immediate on job creation, the system runs the entire job prior to running the page branch, as a result the end user is stuck on a hanging page with no user feedback for two minutes after pressing submit.
I am looking for how to call the procedure and have the branch execute so a progress screen can be viewed. I am not committed to the use of the job scheduler if there is a better way.
Any help is greatly appreciated.

The process involves
(1) a detail table filled with phone usage data, approximately 175,000 records per month.
(2) a table that stores what various combinations of codes in the detail table translate to for types of calls or data transmissions
(3) a summary table for the months calls and billing
(4) the E-Business Suite.
(5) A GTT for temporary crossreference storage
(6) A GTT for reporting data
I have a parameter page where the user selects what data they are looking for and then submits it to generate the report.
The generation of data is a four step process.
(A) Retrieve the Code Combination ID's for the phone usage specified in the parameters from the summary billing table(1) into a GTT(5)
(B) Query the department and Account Code Block Details from E-Business Suite(3) (using dblink) for the CCID's in step one and add to the GTT(5)
(C) Run a query which uses the detail table(1), a function against the crossref table(2), and the crossreference GTT(5) to create the output in the report GTT(6)
(D) An ApEx page process that counts the output and returns to a page without Export to Excel for over 65000 records or with Export for under.
The parameter page is an ApEx page with some text fields, a couple date fields, and some checkboxes. An after submit process calls a packaged procedure which calls separate procedures for (A), (B), and (C), the page then branches to a page that shows an animated gif and current step of the process {this is what is not working right now}. Once the task completes this page branches as per (D) to a page that shows all the contents of the GTT report(6).
The process works successfully with the exception that instead of going to a page to show the process the system simply hangs on the parameter page after the submit is pressed until the processing is done and then goes to the processing page just long enough to branch to the report page.
I am beginning to think that I should alter the design to not use the GTT, but include the username as a field in the output table with a binary index on it for speed so that I can use the job scheduler to run a separate session and hence enable the processing page. The processing page is important as the query can take anywhere from 2 minutes to 2 hours to generate the report depending upon the parameters.

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

How to stop a process chain after the current running process

Hi experts,
I try to stop a running process chain, but only at the end of the current process load.
I try to unscheduled process chain : the job of the current process is killed and the process stop
I try to execute the programm rspc_process_finsh : same result.
Actually, I aim at waiting of the current process completion and stop the chain.
Thanks and regards,
Bobby

Hi all,
Thanks for answer.
If I resume the situation :
- Click on Unschedule process chain stop the current process. We have to change the status of the process in Yellow to Red.
- Go to sm37 to kill the job change the statut in red.
So there is no way to stop the running of a process chain only after the good or bad end of the last runnning process ?
Example :
My chain is running. The process which is running is a DTP loading process. There are 50 packages to load. I decide to click on Unschedule process chain when the package 18 is running.
If I do that, the loading of package 19 will not start right ?
So is there a way to wait that the 50 packages are loaded before that the system stop the chain ?
Thanks in advance,
Bobby.

When I try to apply update it tells me firefox is running and when I try to kill firefox it runs suddenly and mmediately after killig process help meeee

When I try to apply update it tells me firefox is running and when I try to kill firefox it runs suddenly and immediately after killing process help meeee

hello, in case firefox.exe is always running, this might be a sign of malware active on your pc.
[[Troubleshoot Firefox issues caused by malware]]
[[Firefox exe is always running]]

HT4972 After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process?

After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process? I am doing this on the latest iTunes, and a Windows XP computer.

After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process? I am doing this on the latest iTunes, and a Windows XP computer.

Random audio interruptions. I'm getting audio snippets, no more than a word or syllable, about 20 times per hour. Emanates from Mac internal speakers. Started after upgrading to OS 10.9.5. What is it? How can I stop it?

Random audio interruptions. I'm getting audio snippets, no more than a word or syllable, about 20 times per hour. Emanates from Mac internal speakers. Started after upgrading to OS 10.9.5. What is it? How can I stop it?

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Display region after one process has run

I am using htmldb2.0 and I want to display regions after one process in another region of the same page has run. There is type named as "when process in comma delimited list of Process IDs has run" in condition type of region edit. I tried it with putting my process name(also followed with comma) in expression 1 text area but it doesn't work. I am wondering if this doesn't work, how can I implement it in my application.
Thanks in advance,
Ke Lin

I do not get but....
If one process on page start...then page is not rerenderd until it is finished. If process if finished page is submited and then on refresh page process is not running.
So I do not understand how can two process be started on the same process together?
If this si so maye this could be the solution....
could you create autonomous transaction (it commits their data regarding transaction that it participate in!) to make some parameter in table to 1.
When other process starts it checks this value and if this param is 1 then it should not continue.
P.S.
Do not forget to put another autonomous transaction procedure which will set param to "0" after process finish.
Do this main proc with strong exception handling to ensure that param is allways set to 0.

Lingering processes after running adstpall

Hi.
After running the adstpall script, all services stop as planned. Yet the following remains, and there are around 55 of them:
applprod 6401 2898 0 May16 ? 00:00:01 /usr/jdk1.6.0_16/bin/java -Xmx512M -classpath .:/apps/prod/prod
These are mostly from the last few days, but other from over a month ago.
What are these? (I realise they are Java processes - but why do they remain?). Can they be killed manually?
Thank

Hi,
Please see (Note: 374174.1 - One-to-One Fulfillment Server Processes Remain in Memory after being Shutdown).
You can kill those processes manually, but I believe the solution in the document referenced above would be more appropriate.
Thanks,
Hussein

SP3 Almost completes installation but freezes at the Finishing stage showing "Running processes after install"

I have an HP Pavilion zd7000 laptop with Windows XP & SP2 update installed. Processor is Intel Pentium 4. My system is clean with no rubbish software running. I have several anti-malware & anti-spyware systems installed but they are dormant & not running during the attempted installation. SP3 almost completes installation but freezes at "Finishing" stage showing "Running processes after install". Anti-virus is of course switched off. The system then hangs fore-ever with hard disc activity showing intermittently but nothing else happening. Luckily, by holding down the laptop on/off switch I can always eventually restore to previous settings & recover full use but without SP3! This is annoying & frustrating. I have seen a lot of threads about this problem but no real answers. Can anyone help please?

What is Shmrate.exe is not running?
This can be read two different ways
One well if you look at it like this
User>shmgrate>Operating system>drivers>computer. Result is denied!
If you have something like this
User > User Account Control >Operating system>drivers>computer. Result is denied again!
Note that an adminstrator is only a adminstrator and Computer Adminstrator can install Sp(s). Which I believe is tyour question. Which is my guess.
Which is the reason some people reccommend installing from the "Adminstrator" account Which generally is not a User account. Yes some people add and modify there account access by using Subinacl.exe and reset.cmd, which bumps the account from adminstrator to Computer Adminstrator. An alternative is to boot into safe mode. Pressing the *F8* key before the windows welcome screen starts up. And selecting safe mode. Which is why more people report success with using the .ISO install.
To add to your confusion. Windows Sp2 usually has windows installer 3.0, or windows installer 3.1
Table us types of accounts. I wish windows 200 documentation had made it completely into Xps documentation. They had an excellent table with tthe types of accounts
Limited user. Not able to run more then basic programs. Not able to ;install device drivers, not able to install progras, not able to install Sp(s)s
Power user Able to run more advanced programs. IE Defragger.
adminstrator. Mess with the operating system, back up things, able to install programs, add users.When Windows Xp is installed this is the type of user associated with adminstrator. NOT CA
Computer adminstrator. Able to Install of all things Sp(s).
Hopefully this helps you out. Of course there is the release notes, Xp solution center and of course things to do before installing Sp3.
Keith

OID resource goes to Disabled Status after running the post process event handler

Hi,
We have an event handler on post update operation. The event handler using the user manager API to do some modification. We are using the "Lock()" function of User Manager API to lock the user based on attribute value. After running the event handler though the user gets locked as expected, it also disables the OID resource after that. We have other resources along with OID but they are not affected with event handler. Only the OID user is triggering the disable operation on locking the user on event handler. We have used the OID 11g Connector for implementation.
If you manually lock the user in user interface it's not going to disable status.
How we can stop to disable the OID User Account.
Thanks

No.If you lock the user in Console it's not going disable status.
Thanks

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process:         iTunes [5092]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [111]
Date/Time:       2011-07-26 12:08:18.568 -0500
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          504736 sec
Crashes Since Last Report:           20
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

Random audio corruption after running processes

Similar Messages

Maybe you are looking for