Random???? CPU idle temps boot dependent
Does anybody have any idea why CPU idle temps can vary by 3 or 4 deg. C on different boot-ups?
Is it a bug of some form in bios?
For some strange reason my idle temps seem to fluctuate between either 32/33 deg. C or 35/36 deg. C. That temp stays fairly constant and will remain until next boot which may or may not have the lower or higher idle temp readings in both corecenter & NVIDIA MonitorView.
The boot temp also seems to affect the "under Load" temp higher limit by the same amounts (38/39 deg. C vice 41 deg. C).
The reason why I'm worrying about it at all is that I'm wondering if the board is reporting correct temps or if it's just making it up as it goes along.....
Thanks in advance for any thoughts you might have.
I agree here, i dont know what CPU you are running or the MOBO you have since you didnt post it. Your temps seem fine from what you say, as for your fluxuation i would say that maybe your room temp has something to do with it, or maybe its a certain time of the day that the sun shines in your room and rases the temp a little bit. I dont think that your computer just makes it up as it goes...if it says the temp...its most likley the temp. I can simithise with you on wanting to know about temp, im constantly monitoring mine, but i have to say like abouve its not broke...dont fix it, or you might be fixing your whole computer.
GL
Similar Messages
-
AMD Athlon 64 3000 Idle temp and Fan Speed needed.
Does anybody out there know what the CPU idle temp and fan speed should be? My Core Center shows 28C and 3308 rpm. Not sure if this is correct.
I'd be dancing on top of whatever if I got a 28C idle....
-
Hello guys,
I recently installed Arch to my GF's laptop because she wanted to learn some stuff about how to use it, how it works etc... Unfortunately, there are some (seems like) random kernel panics at boot, I haven't found if it's related to some event or not because I've been trying to reboot it 10x in a row or after a whole day of usage etc. to find out if it's caused by some action but it still seems to be random during the boot. Inspecting the stack trace confused me even more because it doesn't look same with each panic. I captured 3 of them for example (sorry, haven't found a way to get them in text format since they are not stored on disk :-/ ):
https://drive.google.com/file/d/0BxrD17 … sp=sharing
https://drive.google.com/file/d/0BxrD17 … sp=sharing
https://drive.google.com/file/d/0BxrD17 … sp=sharing
Reinstalling the system didn't helped (tried it like 3x), current system is fresh fully updated arch that I installed 2 days ago, There's only basic system with KDE, opensource ati drivers, cpufreq and blacklisted modules (pcspkr, bluetooth, toshiba_bluetooth), I made no other modifications (hopefully) which may affect the system boot.
Here is the system info:
uname -a
Linux RadkaPC 3.15.2-1-ARCH #1 SMP PREEMPT Fri Jun 27 07:41:19 CEST 2014 x86_64 GNU/Linux
lsmod
Module Size Used by
nls_utf8 1384 0
fuse 84337 1
btrfs 873944 0
raid6_pq 91142 1 btrfs
xor 11984 1 btrfs
ufs 69790 0
hfsplus 96553 0
hfs 46753 0
minix 29055 0
ntfs 193169 0
vfat 10631 0
msdos 7726 0
fat 53688 2 vfat,msdos
jfs 174901 0
xfs 837555 0
crc32c_generic 1736 2
libcrc32c 1002 1 xfs
reiserfs 239754 0
dm_mod 85322 0
ctr 3927 1
ccm 8278 1
arc4 2064 2
ath9k 89838 0
uvcvideo 74919 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
videobuf2_core 30407 1 uvcvideo
videodev 123032 2 uvcvideo,videobuf2_core
ath9k_common 8550 1 ath9k
ath9k_hw 397498 2 ath9k_common,ath9k
ath 19483 3 ath9k_common,ath9k,ath9k_hw
coretemp 6388 0
intel_powerclamp 9442 0
microcode 17157 0
psmouse 94790 0
serio_raw 5073 0
ums_realtek 7711 0
uas 17010 0
media 12611 2 uvcvideo,videodev
evdev 11784 14
mousedev 10912 0
joydev 10367 0
mac_hid 3273 0
toshiba_acpi 21184 0
radeon 1361605 2
sparse_keymap 3242 1 toshiba_acpi
i2c_i801 11364 0
led_class 3611 2 ath9k,toshiba_acpi
ttm 67215 1 radeon
drm_kms_helper 39643 1 radeon
snd_hda_codec_realtek 54803 1
mac80211 495361 1 ath9k
r8169 59191 0
drm 244782 5 ttm,drm_kms_helper,radeon
hwmon 3346 2 coretemp,radeon
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
i2c_algo_bit 5480 1 radeon
wmi 8539 1 toshiba_acpi
ene_ir 14302 0
i2c_core 41648 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,radeon,videodev
snd_hda_intel 22270 2
snd_hda_controller 22911 1 snd_hda_intel
cfg80211 437959 4 ath,ath9k_common,ath9k,mac80211
snd_hda_codec 104665 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 6652 1 snd_hda_codec
snd_pcm 83207 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
rfkill 15971 3 cfg80211,toshiba_acpi
mii 4251 1 r8169
rc_core 18661 1 ene_ir
battery 7885 0
ac 3595 0
video 12057 0
button 4765 0
shpchp 25706 0
acpi_cpufreq 10170 1
mei_me 10096 0
snd_timer 19294 1 snd_pcm
processor 25153 1 acpi_cpufreq
intel_agp 11504 0
intel_gtt 12856 1 intel_agp
snd 61276 11 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
mei 66784 1 mei_me
soundcore 5551 2 snd,snd_hda_codec
ext4 494228 2
crc16 1359 1 ext4
mbcache 9155 1 ext4
jbd2 82948 1 ext4
hid_generic 1217 0
usbhid 41250 0
hid 93052 3 hid_generic,usbhid
sd_mod 37426 3
sr_mod 15026 0
cdrom 35191 1 sr_mod
crc_t10dif 1135 1 sd_mod
crct10dif_common 1436 1 crc_t10dif
usb_storage 50263 2 uas,ums_realtek
atkbd 17006 0
libps2 4571 2 atkbd,psmouse
ahci 24299 2
libahci 21772 1 ahci
libata 174089 2 ahci,libahci
scsi_mod 138333 5 uas,usb_storage,libata,sd_mod,sr_mod
i8042 13666 2 toshiba_acpi,libps2
serio 11018 6 serio_raw,atkbd,i8042,psmouse
ehci_pci 4152 0
ehci_hcd 64619 1 ehci_pci
usbcore 188381 7 uas,uvcvideo,ums_realtek,usb_storage,ehci_hcd,ehci_pci,usbhid
usb_common 1712 1 usbcore
lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
07:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
lspci -v
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: intel_agp
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d2200000-d22fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: [88] Subsystem: Toshiba America Info Systems Device fd3c
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at d2305000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d2308000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at d2300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d1a00000-d21fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d08fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Toshiba America Info Systems Device fd3c
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1100000-d19fffff
Prefetchable memory behind bridge: 00000000d0900000-00000000d10fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Toshiba America Info Systems Device fd3c
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d2307000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32
Capabilities: [50] Subsystem: Toshiba America Info Systems Device fd3c
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
I/O ports at 6048 [size=8]
I/O ports at 6054 [size=4]
I/O ports at 6040 [size=8]
I/O ports at 6050 [size=4]
I/O ports at 6020 [size=32]
Memory at d2308800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
Subsystem: Toshiba America Info Systems Device fd3c
Flags: medium devsel, IRQ 18
Memory at d2304000 (64-bit, non-prefetchable) [size=256]
I/O ports at efa0 [size=32]
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d2200000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 5000 [size=256]
Expansion ROM at d2220000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon
Kernel modules: radeon
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Toshiba America Info Systems Device fd3c
Flags: bus master, fast devsel, latency 0, IRQ 44
I/O ports at 3000 [size=256]
Memory at d0004000 (64-bit, prefetchable) [size=4K]
Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 8b-00-00-00-36-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
07:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Askey Computer Corp. Device 7173
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at d1100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 27 07:41:19 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ecc688e7-48e8-4dc4-a2ba-ff236d653fc8 rw quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb30efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb30f000-0x00000000bb66dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb66e000-0x00000000bb67bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb67c000-0x00000000bb67efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb67f000-0x00000000bb681fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb682000-0x00000000bb6acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb6ad000-0x00000000bb6ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6cd000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb70ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb710000-0x00000000bb714fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb715000-0x00000000bb718fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb719000-0x00000000bb719fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71a000-0x00000000bb71afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb71b000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed16000-0x00000000fed16fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: TOSHIBA SATELLITE C660/PWWAA, BIOS 2.00 05/09/12
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb000000-0xbb1fffff]
[ 0.000000] [mem 0xbb000000-0xbb1fffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb8000000-0xbaffffff]
[ 0.000000] [mem 0xb8000000-0xbaffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xb7ffffff]
[ 0.000000] [mem 0x80000000-0xb7ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbb200000-0xbb30efff]
[ 0.000000] [mem 0xbb200000-0xbb30efff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] [mem 0xbb7ff000-0xbb7fffff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379e8000-0x37cebfff]
[ 0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 TOSCPL)
[ 0.000000] ACPI: XSDT 0x00000000BB7FE120 000074 (v01 TOSCPL TOSCPL00 00000074 01000013)
[ 0.000000] ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 TOSCPL TOSCPL00 00000074 LOHR 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000BB7E7000 010F89 (v02 TOSCPL CALPELLA 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000BB71A000 000040
[ 0.000000] ACPI: HPET 0x00000000BB7FB000 000038 (v01 TOSCPL TOSCPL00 00000001 LOHR 0000005F)
[ 0.000000] ACPI: APIC 0x00000000BB7FA000 000098 (v01 TOSCPL TOSCPL00 00000001 LOHR 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000BB7F9000 00003C (v01 TOSCPL TOSCPL00 00000001 LOHR 0000005F)
[ 0.000000] ACPI: ASF! 0x00000000BB7F8000 0000A5 (v32 TOSCPL TOSCPL00 00000001 LOHR 0000005F)
[ 0.000000] ACPI: SLIC 0x00000000BB7E4000 000176 (v01 TOSCPL TOSCPL00 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB7E3000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: UEFI 0x00000000BB7E2000 00003E (v01 PTL PTLBUF?I 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000BB7E1000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000BB7E0000 0000DA (v01 PTL PTLSWI 00000001 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bb7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbb7fffff]
[ 0.000000] NODE_DATA [mem 0xbb30a000-0xbb30efff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800b7800000-ffff8800ba7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb30efff]
[ 0.000000] node 0: [mem 0xbb7ff000-0xbb7fffff]
[ 0.000000] On node 0 totalpages: 766636
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11936 pages used for memmap
[ 0.000000] DMA32 zone: 762640 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb30f000-0xbb66dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb66e000-0xbb67bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb67c000-0xbb67efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb67f000-0xbb681fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb682000-0xbb6acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6ad000-0xbb6ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6cd000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb70f000-0xbb70ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb710000-0xbb714fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb715000-0xbb718fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb719000-0xbb719fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb71a000-0xbb71afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb71b000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb71f000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] e820: [mem 0xbc000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800bae00000 s87168 r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 754615
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ecc688e7-48e8-4dc4-a2ba-ff236d653fc8 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3001480K/3066544K available (5222K kernel code, 885K rwdata, 1644K rodata, 1116K init, 1284K bss, 65064K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2128.090 MHz processor
[ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.52 BogoMIPS (lpj=7093633)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20140214
[ 0.011763] ACPI: All ACPI Tables successfully acquired
[ 0.031192] Security Framework initialized
[ 0.031200] Yama: becoming mindful.
[ 0.031522] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.033135] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.033854] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033861] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.034136] Initializing cgroup subsys memory
[ 0.034142] Initializing cgroup subsys devices
[ 0.034144] Initializing cgroup subsys freezer
[ 0.034146] Initializing cgroup subsys net_cls
[ 0.034148] Initializing cgroup subsys blkio
[ 0.034169] Disabled fast string operations
[ 0.034172] CPU: Physical Processor ID: 0
[ 0.034173] CPU: Processor Core ID: 0
[ 0.034179] mce: CPU supports 9 MCE banks
[ 0.034189] CPU0: Thermal monitoring handled by SMI
[ 0.034201] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.034276] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.035185] ftrace: allocating 20223 entries in 79 pages
[ 0.047258] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080252] smpboot: CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz (fam: 06, model: 25, stepping: 05)
[ 0.185018] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.185025] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.185028] ... version: 3
[ 0.185028] ... bit width: 48
[ 0.185029] ... generic registers: 4
[ 0.185030] ... value mask: 0000ffffffffffff
[ 0.185031] ... max period: 000000007fffffff
[ 0.185032] ... fixed-purpose events: 3
[ 0.185033] ... event mask: 000000070000000f
[ 0.211766] x86: Booting SMP configuration:
[ 0.211768] .... node #0, CPUs: #1
[ 0.222905] Disabled fast string operations
[ 0.222920] CPU1: Thermal monitoring handled by SMI
[ 0.225166] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.225183] x86: Booted up 1 node, 2 CPUs
[ 0.225186] smpboot: Total of 2 processors activated (8515.04 BogoMIPS)
[ 0.226518] devtmpfs: initialized
[ 0.229243] PM: Registering ACPI NVS region [mem 0xbb66e000-0xbb67bfff] (57344 bytes)
[ 0.229246] PM: Registering ACPI NVS region [mem 0xbb67f000-0xbb681fff] (12288 bytes)
[ 0.229248] PM: Registering ACPI NVS region [mem 0xbb6ad000-0xbb6ccfff] (131072 bytes)
[ 0.229250] PM: Registering ACPI NVS region [mem 0xbb70f000-0xbb70ffff] (4096 bytes)
[ 0.229251] PM: Registering ACPI NVS region [mem 0xbb715000-0xbb718fff] (16384 bytes)
[ 0.229252] PM: Registering ACPI NVS region [mem 0xbb71a000-0xbb71afff] (4096 bytes)
[ 0.229254] PM: Registering ACPI NVS region [mem 0xbb71f000-0xbb79efff] (524288 bytes)
[ 0.230260] pinctrl core: initialized pinctrl subsystem
[ 0.230313] RTC time: 22:39:59, date: 07/01/14
[ 0.230357] NET: Registered protocol family 16
[ 0.230462] cpuidle: using governor ladder
[ 0.230464] cpuidle: using governor menu
[ 0.230480] ACPI: bus type PCI registered
[ 0.230482] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.230555] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.230558] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.255508] PCI: Using configuration type 1 for base access
[ 0.255633] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.255635] mtrr: probably your BIOS does not setup all CPUs.
[ 0.255636] mtrr: corrected configuration.
[ 0.256365] ACPI: Added _OSI(Module Device)
[ 0.256368] ACPI: Added _OSI(Processor Device)
[ 0.256370] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.256371] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.275020] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.275406] ACPI: SSDT 0x00000000BB713C18 0003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.275854] ACPI: Dynamic OEM Table Load:
[ 0.275856] ACPI: SSDT 0x0000000000000000 0003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.275991] ACPI: SSDT 0x00000000BB711018 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.276600] ACPI: Dynamic OEM Table Load:
[ 0.276602] ACPI: SSDT 0x0000000000000000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.298578] ACPI: SSDT 0x00000000BB712A98 000303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.299079] ACPI: Dynamic OEM Table Load:
[ 0.299081] ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.311757] ACPI: SSDT 0x00000000BB710D98 000119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.312199] ACPI: Dynamic OEM Table Load:
[ 0.312201] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.332259] ACPI: Interpreter enabled
[ 0.332268] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.332273] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.332290] ACPI: (supports S0 S3 S4 S5)
[ 0.332291] ACPI: Using IOAPIC for interrupt routing
[ 0.332323] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.393846] ACPI: \_PR_.CPU2: failed to get CPU APIC ID.
[ 0.393851] ACPI: \_PR_.CPU3: failed to get CPU APIC ID.
[ 0.393855] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.393859] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.393863] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.393866] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.394229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.394235] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.394271] \_SB_.PCI0:_OSC invalid UUID
[ 0.394272] _OSC request data:1 1f 0
[ 0.394276] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.395158] PCI host bridge to bus 0000:00
[ 0.395162] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.395164] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.395166] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff]
[ 0.395168] pci_bus 0000:00: root bus resource [io 0xff28-0xff2b]
[ 0.395170] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.395171] pci_bus 0000:00: root bus resource [mem 0xbb800000-0xfeafffff]
[ 0.395180] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.395200] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.395292] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.395330] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.395453] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.395482] pci 0000:00:16.0: reg 0x10: [mem 0xd2305000-0xd230500f 64bit]
[ 0.395576] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.395689] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.395715] pci 0000:00:1a.0: reg 0x10: [mem 0xd2308000-0xd23083ff]
[ 0.395822] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.396245] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.396324] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.396349] pci 0000:00:1b.0: reg 0x10: [mem 0xd2300000-0xd2303fff 64bit]
[ 0.396457] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.396521] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.396571] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.396674] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.396778] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.396881] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.396997] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.397023] pci 0000:00:1d.0: reg 0x10: [mem 0xd2307000-0xd23073ff]
[ 0.397130] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.397550] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.397627] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.397783] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.397983] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.398011] pci 0000:00:1f.2: reg 0x10: [io 0x6048-0x604f]
[ 0.398022] pci 0000:00:1f.2: reg 0x14: [io 0x6054-0x6057]
[ 0.398032] pci 0000:00:1f.2: reg 0x18: [io 0x6040-0x6047]
[ 0.398043] pci 0000:00:1f.2: reg 0x1c: [io 0x6050-0x6053]
[ 0.398053] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
[ 0.398064] pci 0000:00:1f.2: reg 0x24: [mem 0xd2308800-0xd2308fff]
[ 0.398130] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.398229] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.398255] pci 0000:00:1f.3: reg 0x10: [mem 0xd2304000-0xd23040ff 64bit]
[ 0.398284] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.398446] pci 0000:01:00.0: [1002:68e0] type 00 class 0x030000
[ 0.398463] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.398473] pci 0000:01:00.0: reg 0x18: [mem 0xd2200000-0xd221ffff 64bit]
[ 0.398481] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff]
[ 0.398496] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.398532] pci 0000:01:00.0: supports D1 D2
[ 0.398592] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.398595] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.398598] pci 0000:00:01.0: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.398601] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.398760] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.398824] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.398937] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.399008] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.399329] pci 0000:02:00.0: supports D1 D2
[ 0.399331] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.399791] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.399922] pci 0000:00:1c.0: PCI bridge to [bus 02-06]
[ 0.399927] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.399932] pci 0000:00:1c.0: bridge window [mem 0xd1a00000-0xd21fffff]
[ 0.399939] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd08fffff 64bit pref]
[ 0.400057] pci 0000:07:00.0: [168c:002b] type 00 class 0x028000
[ 0.400100] pci 0000:07:00.0: reg 0x10: [mem 0xd1100000-0xd110ffff 64bit]
[ 0.400339] pci 0000:07:00.0: supports D1
[ 0.400341] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 0.400393] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.400465] pci 0000:00:1c.1: PCI bridge to [bus 07-0b]
[ 0.400470] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.400475] pci 0000:00:1c.1: bridge window [mem 0xd1100000-0xd19fffff]
[ 0.400483] pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd10fffff 64bit pref]
[ 0.400571] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[ 0.400584] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.400586] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.400588] pci 0000:00:1e.0: bridge window [io 0xff28-0xff2b] (subtractive decode)
[ 0.400589] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.400591] pci 0000:00:1e.0: bridge window [mem 0xbb800000-0xfeafffff] (subtractive decode)
[ 0.421768] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.421825] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.421878] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.421931] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.421985] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.422037] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.422091] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.422143] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.422257] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.422262] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.422266] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.422344] PCI host bridge to bus 0000:ff
[ 0.422347] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.422353] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.422406] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.422463] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.422513] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.422561] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.422610] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.422732] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.422778] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.422889] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.422891] vgaarb: loaded
[ 0.422892] vgaarb: bridge control possible 0000:01:00.0
[ 0.422918] PCI: Using ACPI for IRQ routing
[ 0.432874] PCI: pci_cache_line_size set to 64 bytes
[ 0.432935] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.432937] e820: reserve RAM buffer [mem 0xbb30f000-0xbbffffff]
[ 0.432939] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.433054] NetLabel: Initializing
[ 0.433056] NetLabel: domain hash size = 128
[ 0.433057] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.433070] NetLabel: unlabeled traffic allowed by default
[ 0.433096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.433101] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.435130] Switched to clocksource hpet
[ 0.440768] pnp: PnP ACPI init
[ 0.440796] ACPI: bus type PNP registered
[ 0.441592] pnp 00:00: [dma 4]
[ 0.441637] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.441742] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.441786] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.441880] system 00:03: [io 0x1000-0x1003] has been reserved
[ 0.441883] system 00:03: [io 0x1004-0x1013] has been reserved
[ 0.441885] system 00:03: [io 0xffff] has been reserved
[ 0.441888] system 00:03: [io 0x0400-0x047f] could not be reserved
[ 0.441890] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.441891] system 00:03: [io 0xfe00] has been reserved
[ 0.441893] system 00:03: [io 0xff2c-0xff7f] has been reserved
[ 0.441897] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441932] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.465231] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.465271] pnp 00:06: Plug and Play ACPI device, IDs TOS0100 SYN0700 SYN0002 PNP0f13 (active)
[ 0.465653] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.465656] system 00:07: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.465658] system 00:07: [mem 0xfed16000-0xfed16fff] has been reserved
[ 0.465660] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.465663] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.465665] system 00:07: [mem 0xd2306000-0xd2306fff] has been reserved
[ 0.465667] system 00:07: [mem 0xbc000000-0xbc000fff] has been reserved
[ 0.465672] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.465674] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.465678] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.465680] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.465682] system 00:07: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.465685] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.465889] pnp: PnP ACPI: found 8 devices
[ 0.465890] ACPI: bus type PNP unregistered
[ 0.472989] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.473030] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2220000-0xd223ffff pref]
[ 0.473034] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.473036] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.473040] pci 0000:00:01.0: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.473043] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.473047] pci 0000:00:1c.0: PCI bridge to [bus 02-06]
[ 0.473050] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.473056] pci 0000:00:1c.0: bridge window [mem 0xd1a00000-0xd21fffff]
[ 0.473060] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd08fffff 64bit pref]
[ 0.473068] pci 0000:00:1c.1: PCI bridge to [bus 07-0b]
[ 0.473071] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.473077] pci 0000:00:1c.1: bridge window [mem 0xd1100000-0xd19fffff]
[ 0.473082] pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd10fffff 64bit pref]
[ 0.473090] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[ 0.473105] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.473107] pci_bus 0000:00: resource 5 [io 0x0d00-0xfdff]
[ 0.473108] pci_bus 0000:00: resource 6 [io 0xff28-0xff2b]
[ 0.473110] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.473112] pci_bus 0000:00: resource 8 [mem 0xbb800000-0xfeafffff]
[ 0.473114] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.473116] pci_bus 0000:01: resource 1 [mem 0xd2200000-0xd22fffff]
[ 0.473118] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.473120] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.473122] pci_bus 0000:02: resource 1 [mem 0xd1a00000-0xd21fffff]
[ 0.473124] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd08fffff 64bit pref]
[ 0.473126] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.473128] pci_bus 0000:07: resource 1 [mem 0xd1100000-0xd19fffff]
[ 0.473130] pci_bus 0000:07: resource 2 [mem 0xd0900000-0xd10fffff 64bit pref]
[ 0.473133] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.473134] pci_bus 0000:0c: resource 5 [io 0x0d00-0xfdff]
[ 0.473136] pci_bus 0000:0c: resource 6 [io 0xff28-0xff2b]
[ 0.473138] pci_bus 0000:0c: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.473140] pci_bus 0000:0c: resource 8 [mem 0xbb800000-0xfeafffff]
[ 0.473170] NET: Registered protocol family 2
[ 0.473368] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.473508] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.473701] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.473755] TCP: reno registered
[ 0.473764] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.473793] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.473865] NET: Registered protocol family 1
[ 0.498625] pci 0000:01:00.0: Boot video device
[ 0.498646] PCI: CLS 0 bytes, default 64
[ 0.498699] Unpacking initramfs...
[ 0.565206] Freeing initrd memory: 3088K (ffff8800379e8000 - ffff880037cec000)
[ 0.565388] Scanning for low memory corruption every 60 seconds
[ 0.565748] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.581291] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.582903] zbud: loaded
[ 0.583095] VFS: Disk quotas dquot_6.5.2
[ 0.583135] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.583262] msgmni has been set to 5868
[ 0.583326] Key type big_key registered
[ 0.583509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.583553] io scheduler noop registered
[ 0.583555] io scheduler deadline registered
[ 0.583589] io scheduler cfq registered (default)
[ 0.583841] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.584239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.584256] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.584288] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.584290] vesafb: scrolling: redraw
[ 0.584291] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.584628] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[ 0.692300] Console: switching to colour frame buffer device 128x48
[ 0.800473] fb0: VESA VGA frame buffer device
[ 0.800488] intel_idle: MWAIT substates: 0x120
[ 0.800490] intel_idle: v0.4 model 0x25
[ 0.800491] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.800610] GHES: HEST is not enabled!
[ 0.800675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.801507] Linux agpgart interface v0.103
[ 0.801576] rtc_cmos 00:04: RTC can wake from S4
[ 0.801827] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.801870] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.801893] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.802112] TCP: cubic registered
[ 0.802355] NET: Registered protocol family 10
[ 0.802792] NET: Registered protocol family 17
[ 0.803380] registered taskstats version 1
[ 0.804029] Magic number: 6:547:703
[ 0.804180] rtc_cmos 00:04: setting system clock to 2014-07-01 22:39:59 UTC (1404254399)
[ 0.804384] PM: Hibernation image not present or could not be loaded.
[ 0.806307] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.806311] Write protecting the kernel read-only data: 8192k
[ 0.812485] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.815129] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.825831] random: systemd-tmpfile urandom read with 69 bits of entropy available
[ 0.828485] systemd-udevd[47]: starting version 214
[ 0.847937] ACPI: bus type USB registered
[ 0.847970] usbcore: registered new interface driver usbfs
[ 0.847981] usbcore: registered new interface driver hub
[ 0.848252] usbcore: registered new device driver usb
[ 0.848643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.848772] ehci-pci: EHCI PCI platform driver
[ 0.848994] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.849003] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.849020] ehci-pci 0000:00:1a.0: debug port 2
[ 0.852944] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.852965] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd2308000
[ 0.858429] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.865064] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.865706] hub 1-0:1.0: USB hub found
[ 0.865718] hub 1-0:1.0: 2 ports detected
[ 0.866030] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.866038] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.866054] ehci-pci 0000:00:1d.0: debug port 2
[ 0.869965] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.869986] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd2307000
[ 0.873668] SCSI subsystem initialized
[ 0.877948] libata version 3.00 loaded.
[ 0.880017] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.880066] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.880260] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.880461] hub 2-0:1.0: USB hub found
[ 0.880470] hub 2-0:1.0: 2 ports detected
[ 0.880606] ahci 0000:00:1f.2: version 3.0
[ 0.880869] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.880926] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.880980] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 0.880987] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 0.893062] scsi0 : ahci
[ 0.894994] scsi1 : ahci
[ 0.895281] scsi2 : ahci
[ 0.898127] scsi3 : ahci
[ 0.898246] scsi4 : ahci
[ 0.898375] scsi5 : ahci
[ 0.898433] ata1: DUMMY
[ 0.898438] ata2: SATA max UDMA/133 abar m2048@0xd2308800 port 0xd2308980 irq 41
[ 0.898439] ata3: DUMMY
[ 0.898440] ata4: DUMMY
[ 0.898444] ata5: SATA max UDMA/133 abar m2048@0xd2308800 port 0xd2308b00 irq 41
[ 0.898447] ata6: SATA max UDMA/133 abar m2048@0xd2308800 port 0xd2308b80 irq 41
[ 0.912371] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.171591] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.218214] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.248281] ata2.00: ATA-8: ST9320310AS, 0001TSM1, max UDMA/133
[ 1.248288] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.291585] ata2.00: configured for UDMA/133
[ 1.291875] scsi 1:0:0:0: Direct-Access ATA ST9320310AS 0001 PQ: 0 ANSI: 5
[ 1.295817] hub 1-1:1.0: USB hub found
[ 1.296042] hub 1-1:1.0: 6 ports detected
[ 1.401430] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.525585] hub 2-1:1.0: USB hub found
[ 1.525771] hub 2-1:1.0: 8 ports detected
[ 1.568078] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[ 1.594882] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.611371] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.627978] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
[ 1.643823] ata5.00: configured for UDMA/100
[ 1.648130] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
[ 1.940369] usbcore: registered new interface driver usb-storage
[ 1.977879] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.983326] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.983387] sd 1:0:0:0: [sda] Write Protect is off
[ 1.983390] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.983414] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.000488] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.000495] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.000787] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.004700] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.056447] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.058157] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.187850] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 2.277175] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.280152] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input2
[ 2.280197] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 2.281639] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input3
[ 2.281749] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 2.281768] usbcore: registered new interface driver usbhid
[ 2.281770] usbhid: USB HID core driver
[ 2.512693] random: nonblocking pool is initialized
[ 2.567728] Switched to clocksource tsc
[ 3.431573] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.007101] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 6.283904] systemd-udevd[143]: starting version 214
[ 7.208321] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 7.240722] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.246825] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 7.246892] ACPI: Lid Switch [LID0]
[ 7.246955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 7.246959] ACPI: Power Button [PWRB]
[ 7.247015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 7.247018] ACPI: Power Button [PWRF]
[ 7.342206] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.346938] acpi device:02: registered as cooling_device2
[ 7.347008] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 7.507332] cfg80211: Calling CRDA to update world regulatory domain
[ 7.509857] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 7.541997] wmi: Mapper loaded
[ 7.644392] [drm] Initialized drm 1.1.0 20060810
[ 7.673389] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.673401] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.673686] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 7.673886] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc9001077e000, 1c:75:08:89:22:d0, XID 00900000 IRQ 44
[ 7.706894] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.706900] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.706902] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.706904] sound hdaudioC0D0: mono: mono_out=0x0
[ 7.706905] sound hdaudioC0D0: inputs:
[ 7.706908] sound hdaudioC0D0: Mic=0x18
[ 7.706910] sound hdaudioC0D0: Internal Mic=0x12
[ 7.715002] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 7.715143] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.715180] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.778845] ACPI: AC Adapter [ACAD] (on-line)
[ 7.820143] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 7.820152] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.863168] [drm] radeon kernel modesetting enabled.
[ 7.863222] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 7.863224] fb: switching to radeondrmfb from VESA VGA
[ 7.863250] Console: switching to colour dummy device 80x25
[ 7.863647] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1179:0xFD3C).
[ 7.863674] [drm] register mmio base: 0xD2200000
[ 7.863675] [drm] register mmio size: 131072
[ 7.863754] ATOM BIOS: Toshiba
[ 7.863827] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 7.863830] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 7.863831] [drm] Detected VRAM RAM=512M, BAR=256M
[ 7.863832] [drm] RAM width 64bits DDR
[ 7.863892] [TTM] Zone kernel: Available graphics memory: 1503510 kiB
[ 7.863894] [TTM] Initializing pool allocator
[ 7.863899] [TTM] Initializing DMA pool allocator
[ 7.863922] [drm] radeon: 512M of VRAM memory ready
[ 7.863923] [drm] radeon: 1024M of GTT memory ready.
[ 7.863934] [drm] Loading CEDAR Microcode
[ 7.890889] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.20
[ 7.890992] input: Toshiba input device as /devices/virtual/input/input11
[ 7.899897] toshiba_acpi: Accelerometer not supported
[ 7.907098] mousedev: PS/2 mouse device common for all mice
[ 7.928557] media: Linux media interface: v0.10
[ 7.942975] usbcore: registered new interface driver uas
[ 7.954872] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[ 7.973773] scsi6 : usb-storage 1-1.3:1.0
[ 7.973866] usbcore: registered new interface driver ums-realtek
[ 7.988934] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 7.988971] ACPI: Battery Slot [BAT1] (battery present)
[ 8.001248] [drm] Internal thermal controller with fan control
[ 8.020107] usb 1-1.3: USB disconnect, device number 3
[ 8.055319] [drm] radeon: dpm initialized
[ 8.075490] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 8.075518] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 8.075579] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 8.095637] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 8.103987] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 8.104136] radeon 0000:01:00.0: WB enabled
[ 8.104140] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800b069ec00
[ 8.104143] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800b069ec0c
[ 8.104888] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90011f9c418
[ 8.104890] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.104891] [drm] Driver supports precise vblank timestamp query.
[ 8.104919] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 8.104934] radeon 0000:01:00.0: radeon: using MSI.
[ 8.104964] [drm] radeon: irq initialized.
[ 8.122718] [drm] ring test on 0 succeeded in 1 usecs
[ 8.122778] [drm] ring test on 3 succeeded in 1 usecs
[ 8.145575] systemd-udevd[154]: renamed network interface eth0 to enp2s0
[ 8.289104] Linux video capture interface: v2.00
[ 8.303932] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[ 8.311705] [drm] ring test on 5 succeeded in 1 usecs
[ 8.311711] [drm] UVD initialized successfully.
[ 8.311858] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.311884] [drm] ib test on ring 3 succeeded in 0 usecs
[ 8.313622] input: CNF9055 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[ 8.313709] usbcore: registered new interface driver uvcvideo
[ 8.313711] USB Video Class driver (1.1.1)
[ 8.455980] ath: phy0: ASPM enabled: 0x43
[ 8.455985] ath: EEPROM regdomain: 0x65
[ 8.455987] ath: EEPROM indicates we should expect a direct regpair map
[ 8.455989] ath: Country alpha2 being used: 00
[ 8.455990] ath: Regpair used: 0x65
[ 8.463604] [drm] ib test on ring 5 succeeded
[ 8.511806] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.512064] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90012b20000, irq=17
[ 8.515186] [drm] radeon atom DIG backlight initialized
[ 8.515194] [drm] Radeon Display Connectors
[ 8.515197] [drm] Connector 0:
[ 8.515201] [drm] LVDS-1
[ 8.515208] [drm] DDC: 0x6560 0x6560 0x6564 0x6Try "isolcpus=1" in your kernel entry.
-
KM2M Combo - 16 degrees CPU idle?!
OK, I'm confused. Both BIOS and pcAlert 4 shows that I have an idle temp on about 16 degrees C. With the board just laying on the floor without a case (I want to test it thoroughly before I go to all the trouble it is to mount it in my custom built metal suitcase). The temp on the floor is around 20 degrees, so that CPU temp is impossible, right?
I got the mobo yesterday for MP3 use in my car (it will replace a Celeron 433, so it's a big step up...). On it I use a 1,2 duron and SDRAM, so you might call it underclocked. And there's a Cooler Master of the Hoover type (noisy, if you get my drift) But still, this is impossible. Or is it? If it's correct, I'm hysterical. Then I won't have to worry about overheating when it's in my car!
And talk about boot times! I'm down to about 10 seconds from hibernation and less than 30 from cold start, and this is on WinXP with networkdrivers! 8)THe Km2m doesnt have a little sensor inside the cpu socket to read the temps which can result that the motherboard can't display the temperature because theres no sensor to measure the temps from. If you had an XP processor then it would read temps just fine because it has a internal sensor.
-rob -
Idle Temp of 28C (82F) !!! ...but are the fans working?
Ok now that I have your attention :P
Seriously though here is my info, as no one has really posted everything about their MBP's when posting their temps.
CPU on Idle
- A cold boot (was off for few hours)
ambient (room) temp, 15C:
MBP feels like its been in the fridge and starts up with 8C cpu temp. It gets up to 15C, then 24C and stays in mid 30's after 5-10% cpu usage.
- Waking up from sleep
ambient temp, 17C:
MPB feels normal, idle temp of 28-38C.
- Has been on for several hours
ambient temp, 17C:
If I'm not running many apps it may idle at 38C/41C.
Other times (like now) 46C. MBP feels warm but not hot.
High CPU Usage
When running 'yes > /dev/null' in Terminal or ripping a CD cpu temp gets to around 75-80C. But will cool quickly once processor is idle again, to around 45-50C.
Medium CPU Usage
Let's say 20-50% cpu, this is rough guide, I get temp of mid 50's and sometimes above 60C.
(Note: I used Temperature Monitor for temps, and had usually an ambient temp of 17C, though it might be a little warmer. I also have the firmware update from factory).
Other info:
Boot ROM Version: MBP11.0055.B03
SMC Version: 1.2f10
And yes I do have a question ^_^;
Is the faint woosh on the left of the keyboard the HD fan or the CPU fan?? Many people are saying with the new firmware their fans run constantly. I initially thought this must be one of the fans.
MacBook Pro 15" 2GHz, 512MB, Week 28 Mac OS X (10.4.7) AMD Desktop 2.1GHz, 512MB, WinXP (SP1)Those are normal temperatures.
The left fan runs at low speed even when the CPU temps are low. The fans will ramp up, with the right fan running at higher CPU temps. Even with the CPUs running flat out the fans are pretty quiet, especially compared to my old TiBook. During the Hardware Test routines you can hear the fans come on for a short time.
If sensors fail or disconnect the fans will run at full speed constantly. Several people who did the "thermal grease fix" broke sensor connections and had that problem. Speaking of which, I'm glad that thermal grease topic seems to have come to a well-deserved end. -
G505 high idle temps and fan blowing cold air
Hello all,
I bought a Lenovo G505 (AMD A6-5200 model) yesterday which had been a display model for the past 3 months. Mostly it is working fine but I noticed the fan seemed to be running quite a bit even when doing nothing on the PC, what's more the air coming out of the laptop is cold.
I installed coretemp to monitor temperatures and it is showing idle CPU temps of around 50C, which seems too high to me and suggests the CPU heatsink is not correctly seated.
I have checked task manager to ensure that no processes are running the CPU up too much, and removed any that were, but the problem still remains.
Can anyone tell me what the idle temps of an A6-5200 should be, so that I can compare to what I am seeing?
I'm skilled enough with PC's and laptops to take it apart and try to re-seat the heatsink with some good thermal paste, however there is a Lenovo sticker over the screws so I guess that would invalidate the warranty if I did it?
ThanksJust to add - I ran the dust removal program for a good while just in case.
-
Random cpu spikes in 10.6.3 ??
i have a Mainstage session which runs smoothly and comfortably on my 15" Penryn 2.66GHz 10.5.8 Macbook Pro.
It also runs smoothly and comfortably on a unibody 10.5.8 13" 2.2GHz Macbook Pro.
But my brand new 15" 2.66GHz 10.6.3 Macbook Pro shows random CPU spikes when i run Mainstage.. and my session experiences audio and midi glitching.
Logic Studio is the only software installed on this new machine, aside from the bundled OS stuff.
the sessions were created in Mainstage 2.1
the new machine runs Mainstage 2.1.1
anyone else experiencing anything like this?Just putting in my voice... I am also getting the same CPU spikes. You are not alone.
I suspect any number of things are causing the spikes, even when everything is idle, from Mainstage itself, the TASCAM US-144 audio interface, Korg nano-series devices, 3rd party plugs (major companies or not).
I just started using Mainstage this week, but I've been using Logic for years.
I know how to set up an efficient channel strip. There is no reason for my CPU to spike. If I use the same series of instruments, fx plugs, sends, aux channels, etc in Logic 9, the CPU barely takes a hit. THe REAL drag here is that the purpose of using Mainstage instead of Logic is the Loopback feature, which is missing in Logic on its own.
At this point, besides Mainstage being the main culprit, I've narrowed it down to two other culprits: NI Guitar Rig 4, and (this one is odd) Audio Damage EOS. When I instantiate either one of these, the CPU dances or finally goes over the edge and "POP" is heard. Have to quit Mainstage to get sound again.
Buffer overload? Bad memory management/leaks?
I really don't care WHAT the issue is, just as long as I know WHEN Apple will address the problem and issue a fix soon.
~r -
Idle Temp on an MSI 7970 Twin Frozor III BE
What should the standard idle temp and under load temp be on this card?
This is after playing Far Cry 3 for 10 mins..
Everything is set at default out of the box settings and from reviews I am seeing talk of around 70c , but when ever I am playing any games the fan jumps up to very noisy levels and the temp hits 90c.I've spent a little time looking this thing over. I agree with flobelix, the fans on the top of the case should blow OUT not in. The CPU fans should blow OUT also.
I see that you can (or at least used to be able to) order a new door for that case that comes with a window OR a screen. It seems they send you both the window and the screen material and you choose which one you want to use. In your case, use the screen. The screen has mounts on it for four 120mm fans. I don't think you would have to use four, two might be enough. And they would be blowing air IN to the case preferably at (or as near as possible to) the graphics card. When I look at that case it seems to me there would be a air flow dead spot right around your graphics card in the area just above the power supply.
I was also thinking you might want to move your hard drive(s) from the cage that is blocking the 200mm fan in front, to the cage that is right next to your power supply. Then remove the cage that blocks the 200mm fan. If you want a fan cooling your hard drives you could still attach a fan to the side of the cage blowing towards the hard drives. This might improve airflow. -
CPU will not boot up. When the power button is pressed, either from a cold boot, power off or from a reset, the hard drive begins to operate, then you hear 4 beaps a pause of about 5 seconds and then the fan races.
You may have to repurchase some programs if you can't recover their registration codes, etc... Try though some of the data recovery techniques outlined on my backup FAQ*:
http://www.macmaps.com/backup.html
Also try replacing the clock battery.
- * Links to my pages may give me compensation. -
Hi all,
We are maintaining 10.1.0.4.0 database in Linux Server,4 processor CPU. Always I am getting CPU idle time near to 0%. In some times when the developers trying to connect to DB they are getting the error "Unable to allocate 27338m shared memory" and unable to connect to DB. Even if they connect to DB, they are getting slow response.
Please let me know what could be the problem, and how can i resolve this. From last 3 days developers are pinning me.
Thanks in advance
MahiHi Sudhir and Alok,
The below is the error message developers are getting--
ORA-04031: unable to allocate 23788 bytes of shared memory ("shared pool","unknown object","sga heap(1,0)","session parame")
Below are the some line from alert.log file
Errors in file /home/oracle/admin/orcl/udump/orcl_ora_7033.trc:
Tue Apr 3 15:24:17 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:18 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:19 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:19 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:20 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:20 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:20 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:21 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:21 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Please check these and help me.
Thanks in advance
Mahi -
Idle temps for MSI R7850 Twin Frozr 2GD5/OC?
Hello everyone,
I'm concerned about my idle temperatures for this card. I just received it and based on reviews, most people are idling around 30C. However, my card is idling above 55C (without OC). I have adequate cooling in my case, and I've even tested it without the side of the case attached. What could cause my idle temperature to be so high?
Thanks!Quote from: flobelix on 01-August-12, 04:00:22
Keep in mind you are using dual monitor. Even in idle the card will therefor consum far more power than a vga with just one display connected. Consuming more power means more heat so questionable if the idle temps of "most people" you refered to were also using dual monitor. What are your load temps?
The voltage difference between 2 monitors and 1 is 0.9V vs 0.825V. HOWEVER, I did notice that with a single monitor the GPU Memory clock drops (to 150MHz) during idle, but with dual monitor it stays at full speed when idle (Driver issue? I'm running 12.7 beta). A single monitor drops my idle temps down to around 44/46C. IF I force the GPU memory clock to be at the same idle speed when using a single monitor, the temperature for Dual Monitor during idle drops to 44/46C, the SAME as single monitor. That is at 1.075V. That is still a good 15C above what others are reporting. In this case, I'm not seeing a difference in temp between dual a single monitors when I force the GPU Mem Clock to the idle speed.
With load I get between 70C and 80C running Furmark.
One of the reasons I bought this card was because of its ability to overclock. If I'm already that far above in temp, then I feel like I'm going to hit a wall much sooner than I should. I feel like something weird is going on with my card. -
How do I limit the user creat new connect when CPU idle 5%?
my oracle database is 9.2.0.7,
I want to limited the new connection by created when the server (sun solars 5.9) cpu idle <5 % ?> I want to limited the new connection by created when the server (sun solars 5.9) cpu idle <5 % ?
This makes absolutely no sense at all. Not even borderline idiotic - it has invaded the land of idiots looking to conquer and become the biggest one of them all. :-)
But there is actually a very easy way to do it. Outside the database in a script, run uptime. It provides the system load averages for the past 1, 5, and 15 minutes. Use awk to extract these load numbers and use that to make the decision whether connectivity can be allowed or must be denied.
Next check if the Oracle Listener is up. If up and connectivity must be denied, shut it down. If down and connectivity must be allowed, start it. Else, leave it as is.
Then sleep for a few minutes and repeat.
To make this into a proper daemon, you can simply add it to /etc/inittab and have the kernel running it for you and respawning it when it runs into a problem and dies. -
CPU Idle Percentage Near 90 -- Beachball City.
{Sigh}
Slow, slow, slow.
Approximately one month ago I upgraded from Tiger to Snow Leopard. My iMac has been sluggish to slow since. The context/problems/actions
There are three accounts on the computer. A root, a system administrator, and a guest account. The problems are much more pronounced in the System Administrator account than in the Guest account. (In hopes of resolving a Snow Leopard install Filevault issue I deleted a System Administrator account and shortly thereafter recreated it, using its original name.)
Put short, the beachball is a frequent visitor whether using Safari, Text Edit, Finder et al. Additionally, logging out of an account takes much more time than it once did: approximately three minutes to log out.
As to Safari -- slow to launch, slow to load pages. Two-five minutes to visit one page.
What I have tried
1) Checked Activity Monitor --- Percentage CPU of Safari and others is often at less than one percent. The CPU idle percentage is often in 90% range.
2) Compared the DNS of the guest account and sys adm account --- Identical.
3) Uninstalled Flash Player.
4) Checked Disk Utility --- Verified disk. Errors found. Then through Snow Leopard Install Disk, repaired the Disk. Rechecked. No errors found.
Additional info if helpful --
1) The HD is size is 150 GB, only 30 GB in use.
2) Two GB of Ram; one GB is listed as Free.
Day to day tasks are almost impossible in the sys adm account. Please help.
Yours,
LxlocoThank you Lyssa, Pondini, and The hatter for taking an interest.
I took some time away from rooting against the Steelers to do some of the homework mentioned above.
1) File Vault file -- Isn't on this HD; hasn't been on this HD for a couple of weeks. Rather, the file (the sparse bundle) was saved on an external and then deleted from this iMac's HD
2) Smart Utility HD Check -- Results: "Failing;" what's more: "Pending Bad Sectors: 1." Continuing on, "Completed: read failure;" "Remaining 90%;" and "LBA of First Error: 101643935."
3) System Log --- "Insert-Hang-Detected." This untrained eye takes immediate note of that message. It is most frequently associated with Safari, Safari Webpage Preview Fetcher, and Mail. An occasional "Query-Hang-Detected" is also spotted.
4) System Preferences - Login Items --- Only one item reported: A Lexmark Printer that was removed several years ago.
Trying to help myself, elsewhere I read something about a "Performance Update 1.0" from October 2009 and how it could have ameliorated "Insert-Hang-Detected" problems. Yet, when I review the webpage for that Update I fail to see my iMac's model number listed.
http://support.apple.com/kb/HT3901
Lastly, I will attempt to copy and paste excerpts of the system log. I hope this works and offers insights.
*EXCERPT ONE*
Feb 6 01:39:33 lxlocos-computer com.apple.launchd.peruser.501[136] (com.apple.Kerberos.renew.plist[157]): Exited with exit code: 1
Feb 6 01:41:16 lxlocos-computer WDSmartWareD[45]: Daemon Start -- User registered
Feb 6 01:44:18 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x14014].se.coolbook.CPUTest[189]): Exited: Terminated
Feb 6 01:45:02 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x17017].se.coolbook.CPUTest[220]): Exited: Terminated
Feb 6 01:45:08 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x15015].com.apple.grapher[200]): Exited: Killed
Feb 6 01:45:22 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:4.366120, # of Inserts: 1, # of bytes written: 118598, Did shrink: NO
Feb 6 01:45:31 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:8.865640, # of Inserts: 5, # of bytes written: 156588, Did shrink: NO
Feb 6 01:45:34 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:3.200036, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 01:45:51 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:8.405790, # of Inserts: 23, # of bytes written: 245779, Did shrink: NO
Feb 6 01:45:57 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x11011].com.apple.TextEdit[173]): Exited: Killed
Feb 6 01:46:41 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:3.748904, # of Inserts: 26, # of bytes written: 244185, Did shrink: NO
Feb 6 01:48:16 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x1d01d].se.coolbook.CPUTest[242]): Exited: Terminated
Feb 6 01:49:33 lxlocos-computer /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[160]: No valid tickets, timing out
Feb 6 01:50:27 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x1e01e].com.apple.TextEdit[247]): Exited: Killed
Feb 6 01:51:15 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:6.215394, # of Inserts: 16, # of bytes written: 581694, Did shrink: NO
Feb 6 01:51:34 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.002433, # of Inserts: 15, # of bytes written: 153168, Did shrink: NO
Feb 6 01:51:41 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:4.232596, # of Inserts: 8, # of bytes written: 83235, Did shrink: NO
Feb 6 01:52:04 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:10.811223, # of Inserts: 2, # of bytes written: 115937, Did shrink: NO
Feb 6 01:52:14 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.694347, # of Inserts: 7, # of bytes written: 81588, Did shrink: NO
Feb 6 01:52:22 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.331573, # of Inserts: 2, # of bytes written: 2490, Did shrink: NO
Feb 6 01:52:25 lxlocos-computer Safari Webpage Preview Fetcher[264]: QUERY-HANG-DETECTED - time: 3.176528, DB size: 31385600
Feb 6 01:52:28 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.983146, # of Inserts: 2, # of bytes written: 589, Did shrink: NO
Feb 6 01:52:41 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:7.192635, # of Inserts: 10, # of bytes written: 201402, Did shrink: NO
Feb 6 01:52:50 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:9.396734, # of Inserts: 20, # of bytes written: 579885, Did shrink: NO
Feb 6 01:53:00 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:10.352105, # of Inserts: 11, # of bytes written: 127955, Did shrink: NO
Feb 6 01:53:05 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:4.025091, # of Inserts: 1, # of bytes written: 42, Did shrink: NO
Feb 6 01:53:14 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.343501, # of Inserts: 1, # of bytes written: 1191, Did shrink: NO
Feb 6 01:53:23 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:4.528598, # of Inserts: 1, # of bytes written: 13800, Did shrink: NO
Feb 6 01:53:37 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.819838, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 01:54:03 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:4.588173, # of Inserts: 7, # of bytes written: 80110, Did shrink: NO
Feb 6 01:54:17 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.210238, # of Inserts: 2, # of bytes written: 14358, Did shrink: NO
Feb 6 01:54:29 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.436849, # of Inserts: 6, # of bytes written: 205449, Did shrink: NO
Feb 6 01:54:47 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.471765, # of Inserts: 37, # of bytes written: 279087, Did shrink: NO
Feb 6 01:54:56 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:7.150560, # of Inserts: 2, # of bytes written: 14807, Did shrink: NO
Feb 6 01:55:07 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:8.734574, # of Inserts: 13, # of bytes written: 166086, Did shrink: NO
Feb 6 01:55:13 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.456079, # of Inserts: 3, # of bytes written: 49535, Did shrink: NO
Feb 6 01:55:27 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.640008, # of Inserts: 1, # of bytes written: 15176, Did shrink: NO
*EXCERPT TWO*
Feb 6 14:29:44 lxlocos-computer com.apple.launchd.peruser.0[872] (com.apple.Kerberos.renew.plist[899]): Exited with exit code: 1
Feb 6 14:29:44 lxlocos-computer storeagent[903]: port created
Feb 6 14:29:50 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:12.314055, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 14:30:18 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:20.604123, # of Inserts: 1, # of bytes written: 1212620, Did shrink: NO
Feb 6 14:30:26 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:15.947163, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 14:30:41 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:6.006698, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 14:30:42 lxlocos-computer com.apple.fontd[887]: FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
Feb 6 14:30:54 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:8.966403, # of Inserts: 10, # of bytes written: 96834, Did shrink: NO
Feb 6 14:31:02 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:6.418564, # of Inserts: 4, # of bytes written: 27111, Did shrink: NO
Feb 6 14:31:20 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:20 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:20 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:31:20.557 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:29 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:23.337264, # of Inserts: 3, # of bytes written: 37225, Did shrink: NO
Feb 6 14:31:35 lxlocos-computer com.apple.fontd[887]: FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
Feb 6 14:31:39 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:3.584134, # of Inserts: 8, # of bytes written: 118906, Did shrink: NO
Feb 6 14:31:50 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:50 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:50 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:31:50.710 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:32:20 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:32:20 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713540.862623 318713540.864886) 1
Feb 6 14:32:20 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:32:20.865 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713540.862623 318713540.864886) 1
Feb 6 14:32:29 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:38.527892, # of Inserts: 16, # of bytes written: 147173, Did shrink: NO
Feb 6 14:32:39 lxlocos-computer /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Support/genatsdb[925]: GENATSDB FontObjects generated = 295
Feb 6 14:32:39 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:8.416577, # of Inserts: 2, # of bytes written: 32292, Did shrink: NO
Feb 6 14:32:44 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:3.905415, # of Inserts: 5, # of bytes written: 332034, Did shrink: NO
Feb 6 14:32:51 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713571.014017 318713571.016298) 1
Feb 6 14:32:51 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713571.016351 318713571.018601) 1
Feb 6 14:32:51 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:32:51.018 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713571.016351 318713571.018601) 1
Feb 6 14:33:07 lxlocos-computer iCalExternalSync[931]: Client state being vacuumed
Feb 6 14:33:20 lxlocos-computer DockSyncClient[944]: Client state being vacuumed
Feb 6 14:33:25 lxlocos-computer SoftwareUpdateCheck[885]: PackageKit: * Missing bundle identifier: /Library/Receipts/EKPD_fat.pkg
Feb 6 14:33:41 lxlocos-computer quicklookd[939]: [QL] 'Creating thumbnail - cancelled' timed out for '<QLThumbnailRequest <a class="jive-link-external-small" href="file://">file:///.file/id=6571367.4426212>' (Start date: 2011-02-06 14:33:36 -0500)
Feb 6 14:33:52 lxlocos-computer quicklookd[951]: INSERT-HANG-DETECTED: Tx time:10.756175, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Oddly enough, things are working better today. Perhaps my computer is a Packers fan?
Thanks again for care and insights.
Lxloco -
first of all, thanks for the really informative faq. i had a feeling that there was a temperature misreport when i first entered the bios and saw a 62 C idle!
but i still have some questions. i'm using a zalman AlCu7000 with AS5, with normal idle temps of ~64-66C, and load temps of ~72-74C. system temperature holds pretty constant around 35C. the zalman is spinning at around 2500RPM, and the four case fans (it's a cooler master praetorian) are around 2000RPM.
if i take into consideration an offset of, say, 20C, that's still an idle in the mid 40s. yet, when i touch the heatsink (at the fins or at the base), it's really quite cool. i can barely feel any warmth. should i be worried about this? i wonder if i'm not establishing good thermal contact between the two.
EDIT: here are the complete system specs:
MSI-K8N (duh)
A64 3000+ Clawhammer "CG"
2x512MB OCZ performance series pc3500 @ 2.5-3-3-7
thermaltake 480 purepower
zalman AlCu7000
thanks in advance!Quote
Originally posted by killedradiostar
Quote
Originally posted by ksarkisian
killedradiostar, did you take off the msi backplate and install the zalman backplate. I was getting weird temps because I was using the msi bracket instead of the zalman nipples and backplate. Let me know if you have questions.
no, i'm using the MSI backplate. i couldn't get the backplate off (no hairdryer available). i was able to get a nice, snug fit so i didn't think it was a problem. ugh, that makes me worry.
Man, you really need use the Zalman backplate with their coolers. Those nipples will stick up 1/8" higher than the Zalman plate and leave you with a really poor contact between the CNPS7000 and the chip.
I used the Zalman backplate (paper-side to mobo) as a place to lay my small screwdriver against when prying off the MSI plate. The leverage helps immensely and the other backplate will help protect the mobo in case of slippage. -
Average idle temp of new Macbooks?
I just got my first Mac, a Macbook 2.16. I downloaded Fan Control to check my fan speed and processor temperature. Now I know that the MBs run hot, but I'm wondering what the average idle temp is? Mines currently sitting at about 110F/43.5C, and I'm thinking this is a little high. I don't have a great baseline to compare against. I have a Dell 1.8 CoreDuo and a Dell Centrino 1.6, and the MB is significantly hotter than the CD. Is this temp abnormally high?
Hi,
Just looked at my Macbook 2.0GHz and at idle it is running 125F. Sounds like your unit is running a little cold!
John
Maybe you are looking for
-
How can I stream photos to 2 of 4 devices, have same apple ID?
Hi, my wife and I both have a IPhone and IPad. We use the same apple account for purchases. But I don't want to stream photos on all devices. Is there a way to stream photos from my phone to my iPad but not to my wife's and then have her devices sha
-
Hi, I'm new to this product and we're intended to migrate to it in near future. Can someone answer my questions below: - What is the difference between JServer & OAS? they seem to both support EJB. - How scalable is the JServer or OAS? What is curren
-
Hi, On last saturday in our production envirment L1 Backup was failed. due to these error. What could be the reason. sql statement: ALTER SYSTEM ARCHIVE LOG CURRENT released channel: ch1 released channel: ch2 RMAN-00571: =============================
-
I can't print e-mail but I can print PDF files or Word files. I was told by a computer pro that it may be a software problem. What can I do to correct this problem???
-
I accidentally trashed a page of Note on my iphone 4S. Can I recover it? It is not included in my last backup nor it's in icloud! thanks