Random Crashes. How can I start to diagnose problem.
Just purely random and either the app just dissapears or the sys locks up, X don't respond at all and needs a reboot. Only thing is it's only when I'm runnin things todo with 3D-ness, Second Life, Eve Online etc.
all thats in dmesg | tail is this.
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT3 FS on sda1, internal journal
Adding 979924k swap on /dev/sda3. Priority:-1 extents:1 across:979924k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:03:00.0: putting AGP V3 device into 8x mode
/var/log/meggasges.log
an 24 16:19:19 archie ntfs-3g[4732]: Mount options: rw,nosuid,nodev,uhelper=devkit,silent,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096
Jan 24 16:19:19 archie ntfs-3g[4732]: Global ownership and permissions enforced
Jan 24 16:56:08 archie -- MARK --
Jan 24 17:16:08 archie -- MARK --
Jan 24 17:36:08 archie -- MARK --
Jan 24 17:56:08 archie -- MARK --
Jan 24 18:16:08 archie -- MARK --
Jan 24 18:36:08 archie -- MARK --
Jan 24 18:56:08 archie -- MARK --
Jan 24 19:16:09 archie -- MARK --
It's old hardware mostly. Shuttle SN45G, Barton XP 2500+, 1Gb RAM, 7600GS graphics card. Not got anythin clocked. I'm thinkin it's just unlucky with older hardware, but would like to find a log, confirm it etc.
Cheers
Jabb3r
Last edited by Jabb3r (2010-01-24 19:59:28)
This is the output. I aint scanned meself yet properly, just posted it
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
[jabb3r@archie ~]$ sudo cat /var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux archie 2.6.32-ARCH #1 SMP PREEMPT Sat Dec 26 08:26:17 UTC 2009 i686
Kernel command line: root=/dev/disk/by-uuid/2c0d1594-45e4-4f59-84df-c752dc944e05 ro noapic
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 24 16:18:56 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:3:0:0) 10de:02e1:0000:0000 nVidia Corporation G73 [GeForce 7600 GS] rev 162, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe5000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.53 Tue Dec 8 20:47:42 PST 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.53 Tue Dec 8 19:16:02 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Jan 24 16:18:57 NVIDIA(0): Enabling RENDER acceleration
(II) Jan 24 16:18:57 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Jan 24 16:18:57 NVIDIA(0): enabled.
(II) Jan 24 16:18:58 NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:3:0:0 (GPU-0)
(--) Jan 24 16:18:58 NVIDIA(0): Memory: 262144 kBytes
(--) Jan 24 16:18:58 NVIDIA(0): VideoBIOS: 05.73.22.33.52
(II) Jan 24 16:18:58 NVIDIA(0): Detected AGP rate: 8X
(--) Jan 24 16:18:58 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 24 16:18:58 NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:3:0:0:
(--) Jan 24 16:18:58 NVIDIA(0): DELL D2028TCO (CRT-1)
(--) Jan 24 16:18:58 NVIDIA(0): DELL D2028TCO (CRT-1): 400.0 MHz maximum pixel clock
(II) Jan 24 16:18:58 NVIDIA(0): Assigned Display Device: CRT-1
(II) Jan 24 16:18:58 NVIDIA(0): Validated modes:
(II) Jan 24 16:18:58 NVIDIA(0): "1600x1200"
(II) Jan 24 16:18:58 NVIDIA(0): "1280x1024"
(II) Jan 24 16:18:58 NVIDIA(0): "1024x768"
(II) Jan 24 16:18:58 NVIDIA(0): "800x600"
(II) Jan 24 16:18:58 NVIDIA(0): "640x480"
(II) Jan 24 16:18:58 NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) Jan 24 16:18:58 NVIDIA(0): DPI set to (104, 105); computed from "UseEdidDpi" X config
(--) Jan 24 16:18:58 NVIDIA(0): option
(==) Jan 24 16:18:58 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 24 16:18:58 NVIDIA(0): Initialized AGP GART.
(II) Jan 24 16:18:58 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Jan 24 16:18:58 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Jan 24 16:18:58 NVIDIA(0): configuration option may not be set correctly. When the
(II) Jan 24 16:18:58 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Jan 24 16:18:58 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Jan 24 16:18:58 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Jan 24 16:18:58 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Jan 24 16:18:58 NVIDIA(0): Config Options in the README.
(II) Jan 24 16:18:58 NVIDIA(0): Setting mode "1600x1200"
(II) Loading extension NV-GLX
(II) Jan 24 16:18:58 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jan 24 16:18:58 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Microsoft LifeChat LX-3000
(**) Microsoft LifeChat LX-3000: always reports core events
(**) Microsoft LifeChat LX-3000: Device: "/dev/input/event7"
(II) Microsoft LifeChat LX-3000: Found keys
(II) Microsoft LifeChat LX-3000: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft LifeChat LX-3000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event6"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Found relative axes
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found absolute axes
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) acceleration profile 0
(II) USB Optical Mouse: initialized for relative axes.
(WW) USB Optical Mouse: ignoring absolute axes.
(II) config/hal: Adding input device Chicony Saitek Eclipse II Keyboard
(**) Chicony Saitek Eclipse II Keyboard: always reports core events
(**) Chicony Saitek Eclipse II Keyboard: Device: "/dev/input/event5"
(II) Chicony Saitek Eclipse II Keyboard: Found 8 mouse buttons
(II) Chicony Saitek Eclipse II Keyboard: Found keys
(II) Chicony Saitek Eclipse II Keyboard: Configuring as mouse
(II) Chicony Saitek Eclipse II Keyboard: Configuring as keyboard
(**) Chicony Saitek Eclipse II Keyboard: YAxisMapping: buttons 4 and 5
(**) Chicony Saitek Eclipse II Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Chicony Saitek Eclipse II Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Chicony Saitek Eclipse II Keyboard
(**) Chicony Saitek Eclipse II Keyboard: always reports core events
(**) Chicony Saitek Eclipse II Keyboard: Device: "/dev/input/event4"
(II) Chicony Saitek Eclipse II Keyboard: Found keys
(II) Chicony Saitek Eclipse II Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony Saitek Eclipse II Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech Trackball
(**) Logitech Trackball: always reports core events
(**) Logitech Trackball: Device: "/dev/input/event3"
(II) Logitech Trackball: Found 3 mouse buttons
(II) Logitech Trackball: Found scroll wheel(s)
(II) Logitech Trackball: Found relative axes
(II) Logitech Trackball: Found x and y relative axes
(II) Logitech Trackball: Configuring as mouse
(**) Logitech Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
(**) Logitech Trackball: (accel) keeping acceleration scheme 1
(**) Logitech Trackball: (accel) acceleration profile 0
(II) Logitech Trackball: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Similar Messages
-
HT4623 I have the 1st ipad 3G wifi cell 64g and it keeps crashing how can I fix this problem
I have the 1st ipad 3G wifi cell 64g and it keeps crashing how can I fix this ?
I have restored network settings and cleared history etc ..Try closing all apps and reboot the iPad. Clear Safari again as well.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
The problem originated from Talktalk's Assist & Go software interfering with my browser settings. This caused Firefox to repeatedly crash with message (see below)I then got error "ssl_error_ssl_disabled" when trying to access my webmail- I followed the help instructions and deleted the cert8.db file whcih allowed Firefox to start & me to access my webmail.
But all the browsing history has disappeared, I had about 6 months prior to the crash, how can I recover it, is there a backup?The problem originated from Talktalk's Assist & Go software interfering with my browser settings. This caused Firefox to repeatedly crash with message (see below)I then got error "ssl_error_ssl_disabled" when trying to access my webmail- I followed the help instructions and deleted the cert8.db file whcih allowed Firefox to start & me to access my webmail.
But all the browsing history has disappeared, I had about 6 months prior to the crash, how can I recover it, is there a backup? -
My computor had been overly slow which was not normal when looking at processes running in task manager I found plugin-container.exe to be using alot of memory. I looked online and found that this was an update of firefox which was not essential, I then looked on my C:\ drive for the application and deleted it hoping this would solve the problem as I could not find it when looking at my firefox plugins. However now when I open firefox it quickly crashes, how can I reinstall this? Do I need to reinstall firefox completely or is there a more simple solution? I have done the firefox plugin check and it can find no problems.
Probably the easiest way is to download Firefox again from http://www.mozilla.com and re-install it.
If you want to disable plugin-container, see the section on "Disabling crash protection" at http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins -
SAP dispatcher status is stopped in Console how can i start it
Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 21
intno 20020600
make: multithreaded, ASCII
pid 736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 21 successfully loaded
shared lib "dw_xtc.dll" version 21 successfully loaded
shared lib "dw_stl.dll" version 21 successfully loaded
shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c 12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Oct 02 07:03:48 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1500 Ended no 1 0 0
1 DIA 3796 Ended no 1 0 0
2 UPD 3548 Ended no 1 0 0
3 ENQ 1464 Ended no 1 0 0
4 BTC 3368 Ended no 1 0 0
5 BTC 3400 Ended no 1 0 0
6 SPO 2620 Ended no 1 0 0
7 UP2 380 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Oct 02 07:03:48 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c 8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 21
M intno 20020600
M make: multithreaded, ASCII
M pid 1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 02 12:32:59 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c 357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PMHi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Oct 03 11:02:36 2008 5494 0.005494
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005534
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.005560
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 33 0.005593
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 139566 0.145159
4 ETW000 [dev trc ,00000] using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000 22 0.145181
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 7 0.145188
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 13 0.145201
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000 2501 0.147702
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.147714
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 18 0.147732
4 ETW000 [dev trc ,00000] New connection 0 created 13 0.147745
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.147760
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 12391 0.160151
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.160163
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.160177
4 ETW000 [dev trc ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry 796 0.160973
4 ETW000 [dev trc ,00000] -->oci_initialize 400 0.161373
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000 34020 0.195393
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: TNS-name missing 11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE --- TWO_TASK = ''"
Thanks
Sudhakar A -
How can I start anew with Photos and clear the (minimal) stuff it has uploaded
I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary. -
How can i start Terminal in a specific folder
how can i start Terminal in a specific folder
From the menu bar, select
▹ System Preferences... ▹ Keyboard ▹ Keyboard Shortcuts ▹ Services ▹ New Terminal at Folder: On
Right-click or control-click a folder in the Finder and select that item from the contextual menu. -
My old computer crashed how can i get my songs from my phone into my new library?
my old computer crashed how can i get my songs from my phone into my new library?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
My hard drive crashed how can i get my old music from my itune account
my hard drive crashed how can i get my old music from my itune account
If you have the media on an iDevice then you should be able to get most of your non-iTunes purchases back as well. See this post from forum regular Zevoneer for options.
tt2 -
How can I start a new paragraph within the same table cell?
In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)? I'd like to enter a mini-list of several items of various lengths of data.
While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
With that box unchecked, Shift Return types a soft return (new line without a paragraph break). -
How can I start a second window of a second profile through the command line?
I have two profiles set up, 'default' and 'second'. If both are already running how can I start a second window of profile 'second'?
firefox -p 'second' : opens a new window of the default and,
firefox -p 'second' -no-remote : tells me that firefox is already running.I don't think that this is possible.<br />
You need to open this second instance (Firefox profile folder) with the -no-remote command line switch and that makes it impossible to open external links via the command line or via a double-click.<br />
You can only open a link in such an instance by dragging the link on the tab bar of that Firefox window. -
How can i start oracle databases? i am using Oracle 8.1.6 for linux.
when i run dbstart,it gives me following message:
Database "ora4cweb" warm started.
but when i use sqlplus,it says:
ORA-01034: ORACLE not available
i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.try it without the scripts...
login to linux as oracle
start server manager
svrmgrl
connect internal
startup
select sysdate from dual;if that works
exitcheck listener
lsnrctl
statif nothing running type
start
exitnull -
I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes
Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
how can i start my phone after it went on safe mode while i was updating it!! it says i need to connect with itunes but when i doo it tells me its an error !! i cant use my phone at all!!
modular747,
Had same problem, got answer from supprot community and it worked.
Hold down your power bar (on top) and your Home button (on face at bottom) for about 10 - 20 sec. and your phone will be restored - nothing lost or changed. Worked like a charm for me 20 sec ago.
Good luck -
My hard drive crashed. how can i reload dreamweaver on a new hard drive?
my hard drive crashed. how can i reload dreamweaver on a new hard drive?
You can per install Dreamweaver again the same way you installed previously. Do you get any error messages while installing? If yes please attach a screenshot(if possible) and provide more details abount the version/OS and the exact error message.
Thanks
Nikhil
Maybe you are looking for
-
Out of scope error while attaching the attribute set and the operating unit
Hi, Am getting the out of scope error when am trying to attach the attribute set "/oracle/apps/fnd/attributesets/HrOperatingUnits/OperatingUnitName_Transient" and the operating unit lov "/oracle/apps/fnd/multiorg/lov/webui/OperatingUnitsLovRN" from m
-
Can't get version based downloads to work
I am new to JNLP and trying to get version based downloads to work. I have read everything I can find, but I still seem to be missing something. My setup: Tomcat 4.1.18 (running in JDK 1.4.0) Java WebStart 1.2 Win 2k files in .war -launch.jnlp -+1.0
-
Can i expand the processor of mac pro w/ an acceleration card?
Can i expand the processor of mac pro w/ an acceleration card? If yes, what is compatible w' mac pro (2007) duo dual core? Thanks
-
Good afternoon, In my application I have a spinner that allows me to jump to a certain page and I am very successful with using xfa.host.currentPage = 2 for the PDF view. My question is how can I replicate this logic in HTML? Thank you, james
-
The below are my character set in my DB NLS_CHARACTERSET=WE8ISO8859P1 NLS_NCHAR_CHARACTERSET=UTF8 Correct Answer (If I use english language the result is correct) ========== select product(',','AB_BC ,DE') from dual; (AB_BC, DE,,,) After altering the