Random freeze or stop on export to tape

I have an i7 2.93 GHz with 3GB DDR-3 RAM. I have a Zotac TX295 video card. The system is a dual boot with Vista Ultimate 32 bit/XP Pro 32 bit. I am primarily using Vista. I have 2TB between2 RAID pairs, 750GB OS drive and a separate 750GB data drive.
Windows, Adobe hardware firmware, etc. is all up to date.
4 weeks ago (6/6) I successfully exported over 8 hours of DV footage to a DVCAM and a mini-DV camera. Now i keep having a tape export problem. One of two things happens:
1. The tape will not record the full length of the project, not report any dropped frames but say it was successful. It's random. It can be a minute into the project or 30 minutes into it when it happens. When this happens you see the camera viewfinder flicker to a blue screen real quick before returning to the video and stop recording.
2. The video hits a random frame and continues recording but frozen on that frame with the sound stuttering on the sound of a single frame.
As of tonight now, I have an additional issue where once you try to export Premiere slows down dramatically. But, if I turn off or disconnect the camera from the computer everything suddenly speeds back up.
All the while Premiere still reports I have about 1.2GB of free memory. I even set the Page File to min. of 3 GB and a max of 6 GB.
Here's what I have tried but have still had no success:
1. I brought the project into a new one and deleted the render files and then re-rendered.
2. I exported the project out as a new AVI, brought that into a new project.
3. I exported the project out as a new AVI, switched to the XP OS, brought it into a new project in different scratch disk folders on a different hard drive.
4. I held down Shift while Premiere started to clear the plug-in cache.
Now the only recent changes that I'm aware of in the last 4 weeks are as follows (I listed what I did to try to resolve the issue):
1. I updated my RAID controller card so I moved the files to a non-RAID drive thinking the firmware update created a problem.
2. I updated the video card drivers so I rolled them back to the version they were 4 weeks ago.
3. I saw that there was a .Net Framework 3.5 Service Pack 1 update. According to Microsoft this only provided a security patch for Firefox.
I can't figure out what's going on. I can't export this project yet 2 projects that are from 4 weeks ago or older seem to export to tape fine. And the weird thing is if I take the exported clip of this project that won't export to tape and bring it to my friend's computer who has Premiere Pro 2.0 it exports to tape successfully every time.
I don't trust the stability of the software now. I even had a few weird instances that when mono clips were imported Premiere randomly saw them as stero clips.
Any ideas? I have another major project to start and the instability is really worrying me. Please contact me at [email protected]. Thanks.

One other thing...
I tried to different cameras, firewires and the firewire connection on my firewire card and coming off the motheboard.

Similar Messages

Export to tape stops unexpectedly

Hello,
I am trying to Export to Tape from CS4 to a Sony DSR-1500AP deck. It starts fine, but after about 5 minutes (a different point on each occasion) everything just stops.
This happens in DV and DVCAM projects.
I would be extremely grateful for any assistance!
Thanks
Robin

We have the same deck but had a similar issue with our DSR-11 on show site. Our export would stop recording "Export to Tape" at the exact place (as indicated by the CTI) every time. Very frustrating. It turned out in our case that the problem related to an NTSC Widescreen *.avi file that was created on a Mac using Boot Camp. Are there any suspect files in your project? I solved the issue on an earlier version of Premiere (not CS4) by bringing this file (where the tape stopped) into an new project and exporting it as a Microsoft AVI as opposed to a DV AVI. Once I replaced the file on the timeline with my new exported version, the export to tape went without a hitch.

10.6 definitely won't stop random freezing on my MacBook 13"

Hello.
I have a MacBook white I bought two years ago.
When I bought it it already came with 10.5 installed.
A couple months after I bought it I upgraded its RAM from the original 1G to 4G, as well as changed its harddrive from the original 120G to a Seagate 500G.
Nothing stopped working, in fact I thought I had (or still have, hopefully) a very nice machine.
When apple released Snow Leopard I felt tempted to upgrade after looking through the neat new features. I went to the store and bought my copy of Snow Leopard and made an upgrade of my machine.
This is when I started experiencing ****!
From the moment I upgraded to 10.6 my once steady and consistent mac started random freezing and showing me that extremely obnoxious beach ball (a.k.a. beach ball of death).
From September 2009 (when I made the upgrade) until last month (March 2010) I kept trying and digging for solutions to this issue. I tried literally everything I could find in the forums, both apple discussion forums and other mac related forums. From resetting the SMC to doing a fresh 10.6 installation (yes, from scratch).
I'm very unfortunate to say that nothing, nothing worked. The random freezing kept happening on 10.6.
This was when I decided getting back to 10.5.
I even did a full RAM test using memtest (I left it running for a whole day on single user mode) and all tests passed.
10.5 is working nicely so far, I have been testing it full load for a couple of days and no freezes so far.
Now here's my question: why in the world 10.6 won't work for me? I really want it but I can't afford having a Vista like OS in my mac.
Anybody has any clues? Any probing suggestion I might have missed?
Thanks a lot!

Well, I only got to read your reply after exchanging the hard drives.
In any case I got 10.6 freezing with the old HD as well, which is sad!
Regarding the RAM I bought, I got it from a local electronics store and it is supposed to be a kingston module. I never verified the modules in the Kingston website though.
I'll get them off and try to verify the authenticity of the modules with Kingston, and will give a try with the old memory modules.
From the top of my head I can't figure what kind of incompatibility can there be with a working module that has the exact specifications of the macbook I own. In any case, it is worth the check.

Premiere will not export to tape - video freezes

     I'm sort of revisiting a problem I thought I solved. Initially I had issues with playback in my source and program monitors. I would hit play and it would roll the video for about two seconds then freeze (the audio would continue).
     I found that only when I had my DV device (sony PD-170 or Sony DSR-11) hooked up to the computer, it would do this. But when I pulled the firewire from my device it would no longer freeze and I could go on with my editing.
     I thought, okay, I'll just capture the footage then pull the device. That's worked up until I realized that it does the same thing if I want to export to tape. It will not play the video in the program monitor so my recording device records nothing at all.
     Any ideas on why this happens only when my DV device is hooked up to the computer?

I'm with Jim. Works for me.
Another alternate is CyberLink Power Director (not freeware), that also does a good job with all SD material to my Canons.
Sorry that I do not have a direct answer for you,
Hunt

Exporting to tape and capturing

I notice that premiere pro cs4 when i am capturing 2 hours video or exporting to tape, freeze often.
i open my task manager and i saw that memory is always increasing (consuming 3,4 gb, when exporting 1 hour and ten minutes) so i have only 2 gb of ram, when it passes the limit, it stop responding.
if it is a short clip and dont pass the 2 gb limit, it´s ok. I dont know where is the problem, in PP CS3 no problem...
I forgot...
My system is Core duo e 8200
2 hard drives 7.200 rpm
windows xp 32 bit
thanks

Actually, I think that it might be the other way around. We understand your post, but I do not think that you understand Harm's. What he has provided are several articles on troubleshooting, that will either fix your situation, or will rule out certain things as the likely causes. At the bottom of the article linked to, you have a list of questions. It is the answers to these, plus what you tried from the troubleshooting guides, and the results, that will help us understand your problem better. It's the "problem," and not the post, that we need an understanding of.
With 2GB of RAM, and you observing a "ceiling" on RAM use, the first thing that I'd do would be to go to 4GB. RAM is cheap. You will want to match your existing RAM in every aspect, to the new RAM. If this is not possible, because of availability, or how your MoBo's memory slots are configured, then just go with 4GB of new RAM. You will not quite be able to use 100% of that 4GB, but enough that it could make a difference.
Good luck, and please report back with the answers to the 16 questions, plus what helped, or did not help, from the troubleshooting articles.
Hunt

WSJ App Random Freezes

Recently the WSJ app in Newsstand will randomly freeze. The only fix is to close then reopen app. It happens at least once per reading session (day). Anyone else experience this w/ iOS7.1 + iPad Air w/ the latest update from last month?

Hello, Harry.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the second article below when experiencing this issue.
iOS: Using Newsstand
http://support.apple.com/kb/HT4943
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
If none of the steps resolve the issue I would recommend reaching out to the developer.
Contact the developer
If you see the issue again, contact the developer of the app for help:
Find the app in the App Store.
Tap the app and tap Reviews.
Tap App Support.
Cheers,
Jason H.

Lumia 620 randomly freezes and reboots

I knew a cheap windows phone is too good to be true. I've been getting random freezes and reboots without any reason at all. This is unacceptable, nokia should address this windows 8 issue afflicting wp 8 phones. Please don't tell be to do a soft or hard reset because we already know it won't fix the problem.

Hi, everyone. I've been having problems with random reboots ever since I bought my Lumia 620 and it was driving me crazy. It freezes up sporadically too, but I think I found a fix for rebooting issues.
When my cousin bought her Lumia 620 I immediately asked her if hers rebooted sporadically as well. She said it hadn't, not once. Then, one time her battery was dying so I gave her mine, and she left me with her battery and on charger while she went home. Anyway, hers started to reboot frequently, whilst mine was behaving ok.
When we replaced the batteries again, mine began rebooting again.
Finally, I checked both our batteries and found out mine was moving around the device more freely than hers. Hers was held firmly in place while mine danced around. Then I tried moderate, yet gentle tap on the side of my device and it rebooted EVERY TIME I tapped it. After I inserted a small, neatly folded piece of paper between the device and the battery, the battery clicked in place tightly and it couldn't move at all. Reboots stopped, no matter how strong I tapped the sides of the device.
This hasn't resolved any freezes, but at least it's not rebooting all the time. So check your battery, maybe it is a hairline thinner or smaller or whatnot from the rest of them and it can move around. A millisecond is enough for it to lose contact, half a millimeter of movement is enough to cause your phone to reboot. Hope this revelation of mine will help someone

Macbook Air 2011 11" - random freezes. Roaming wifi causing it?

I have MacBook Air 11" Mid-2011 (4GB RAM, 128GB SSD, i5). Ever since getting the machine I've experienced random freezes - spinning beachball, screen becomes unresponsive, holding the power button to force it to close being the only thing I can do. The console logs don't show anything that indicates a problem. They just stop logging anything until I restart. I took it to an Apple store Genius while still under warranty and they kept it in for a few days and ran a suite of tests and found nothing.
The problem was completely random and unreproducable. Sometimes it would happen a few times in a row, then nothing for weeks. Also, it was only happening when I was staying in a particular hotel during the week for work. It was Hilton hotel with the wifi being provided by BT Openzone. It would only happen there, never at home, family members house, Starbucks (which also use BT Openzone here in the UK, airports).
I recently made some changes to my home wifi setup and the problem has reappeared, but this time at home. Where previously I just had an Airport Extreme, I have now extended the network over ethernet powerline to a second wifi access point. The second wifi access point has the same SSID as the main network.
All my wireless devices should seamlessly switch between access points as I move them around the house. Our iPhones, iPads and Dell laptop seem to have no problem doing this. When I move away from one access point, once the signal strength drops to certain point, the device connects to the second access point. The MacBook Air also does this, but it seems to freeze if I am in an area where the signals are overlapping. This also describes the situation in the hotel. The BT Openzone hotspots were spread across the hotel. If my room was in an area where the signals from access points were overlapping I would be more likely to experience the freeze.
If I look in the Wifi logs I can see messages stating that some sort of threshold has been reached and the wifi is starting roaming. These messages are always present at the time of the freezes.
Has anyone else experienced this problem? Is it something Apple would fix eventhough I'm now out of warranty? If it could be a hardware problem, would replacing the wifi card myself help?
cheers.

I have MacBook Air 11" Mid-2011 (4GB RAM, 128GB SSD, i5). Ever since getting the machine I've experienced random freezes - spinning beachball, screen becomes unresponsive, holding the power button to force it to close being the only thing I can do. The console logs don't show anything that indicates a problem. They just stop logging anything until I restart. I took it to an Apple store Genius while still under warranty and they kept it in for a few days and ran a suite of tests and found nothing.
The problem was completely random and unreproducable. Sometimes it would happen a few times in a row, then nothing for weeks. Also, it was only happening when I was staying in a particular hotel during the week for work. It was Hilton hotel with the wifi being provided by BT Openzone. It would only happen there, never at home, family members house, Starbucks (which also use BT Openzone here in the UK, airports).
I recently made some changes to my home wifi setup and the problem has reappeared, but this time at home. Where previously I just had an Airport Extreme, I have now extended the network over ethernet powerline to a second wifi access point. The second wifi access point has the same SSID as the main network.
All my wireless devices should seamlessly switch between access points as I move them around the house. Our iPhones, iPads and Dell laptop seem to have no problem doing this. When I move away from one access point, once the signal strength drops to certain point, the device connects to the second access point. The MacBook Air also does this, but it seems to freeze if I am in an area where the signals are overlapping. This also describes the situation in the hotel. The BT Openzone hotspots were spread across the hotel. If my room was in an area where the signals from access points were overlapping I would be more likely to experience the freeze.
If I look in the Wifi logs I can see messages stating that some sort of threshold has been reached and the wifi is starting roaming. These messages are always present at the time of the freezes.
Has anyone else experienced this problem? Is it something Apple would fix eventhough I'm now out of warranty? If it could be a hardware problem, would replacing the wifi card myself help?
cheers.

KT6 Delta - Random freezes and LAN Issues

Just built a new PC, installed Win XP, installed all the drivers etc.
I get random freezes - as in the machine will just stop responding totally. I could run for an hour before a freeze, other times its frozen before I've even logged in.
Also the LAN keeps dropping out too. The timing of this is also random, just to make things interesting. I could be downloading a 20MB file, get only 2MB into it, then it just sits there. The only way to get the LAN back up and running is to reboot. Once I've rebooted, its a case of just waiting for it to fail again
The specs are as follows:
KT6 Delta-FIS2R (Gigabit LAN etc.)
AMD 2800XP+
1GB Crucial (2 x 512)
ATI Radeon 9600 Pro
80 Maxtor HD
400W PSU
I've got the FSB set to 166 and also set the memory up correctly (333 and 2.5 cl) but to no avail.
I was running with a Soundblaster Audigy card, but took that out and still got the same. I even tried taking out one of the memory modules.
I don't think its a temperature issue as the CPU is currently running at about 47 Degrees and I've got the side off-of the case.
Please - anyone got any ideas???

I have a KT6 Delta LSR and am having probs with the onboard Broadcom 4401 as well.
After Initial boot of machine I have 2-5 minutes to surf the net or whatever. At that time I lose connection. Also if I linger on one page long enough to read, I lose connection. Or shutdown a net connected program, it loses connection.
When I play Tribes - the connection stays till I leave the server - then I have to reboot.
This is driving me nuts. I have disabled the Lan in bios and installed a Netgear 10/100. XP recognizes it but cannot get rid of "Cable not plugged in" message. So I reinstalled the 4401.
I have RR and am behind a Phoebe 4 port router. None of the other computers have a problem with the router, and I have tried changing plug in ports around among the computers.
I have the same version of driver for it as the latest at MSI. Flashed the latest bios lately as well, in desperation.
Any ideas? I sure would appreciate it.
Oso
KT6 Delta-LSR
XP SP1
Gig of DDR
400w power supply

Random freezes with kernel 2.6.34 and xorg 1.8

The other day I upgraded the kernel to version 2.6.34 and at the same time xorg-server to 1.8 (along with input drivers and video drivers). From that moment, I suffer from random freezes, the system is completely locked up; the screen doesn't blank, though. The system appears to be perfectly fine, but after some minutes it will freeze.
As far as I can remember, the freezes only occur when using a webbrowser. Chromium is my default browser, but also Firefox and Konqueror caused the system to freeze completely when I want to open a webpage. Other network programs such as irssi can run for hours and they didn't seem to cause any havoc.
At first I thought this might be caused by some instability in the latest xf86-video-ati driver, so I downgraded back to xorg-server 1.7. Still the same symptoms, so I am pretty sure now there's something in the kernel. So I went back to xorg-server 1.8 and downgraded the kernel to 2.6.33. So far, the system hasn't let me down, yet. Also, I uninstalled the madwifi packages on my system so I'm using the ath5 drivers shipped with the kernel. That change doesn't seem to make a difference.
I am not exactly sure what exactly could cause this, there's no trace in any log file to be found. My suspicion is that it's network related.
The hardware is a Thinkpad T42 with an ATI Radeon Mobility 9600 (r300) chip and an Atheros wireless card.
Anyone else with similar experiences with this hardware? I can't think of a way how to properly debug this. I know I can bisect, but that's time consuming and perhaps it's quicker to ask around first before I walk down that road. Any suggestions are welcome on how to track this down.

The last time I used arch was to do the updates, just got back to using it and crash!
Mine boots up to the point of the UDev events, but when I change the boot line to use /dev/sdxx instead of the /dev/disk/by-id/ xxxxxxxxxxxxxxxxx I go to the next step where the video mode changes, then it freezes. Half the other time it would stop at udev and either blank out totally or just stop. I don't even get a full bootup (standard or fallback). My other archs boot just fine.
Downgraded the kernel to the immediate previous kernel before .34 and booted upto the point of the window manager, so I think it's a problem with either the video driver or the xorg, because they were both updated at the same time, but the kernel may be a bit buggy also. (Of course, using the chroot and the arch install CD appropriate for my arch). Also, it only shows up on one screen on the dual headed setup, which makes obvious which one isn't working.
When the kernel calls the videomode (same one that can be called from kernel command line), that's when it is dying. The only machine I'm having trouble with is the same one that will be the only one to do any updates, maybe this will fix the problem.
The updates didn't make any difference. It still hangs at the videomode change. Was able to get a read out one time that one of the video cards had wrong ROM contents?
Have had to use the top level ftp.archlinux.org just to get the most recent updates, without having to fish through mirrors.
My presumption is that the kernel/video hardware is just not working in console mode or the graphics mode.
Strangely enough both of my hardwares, one is a mobile intel 945 and the other is a desktop 945. The mobile works without a hitch, and the desktop freezes.
Last edited by nomorewindows (2010-08-15 21:23:56)

Any 3rd Party Application(s) to export to tape?

Heya guys. Hope production has been treating you all well. I'm kind of in a jam here where for some reason both my sony dv decks have stopped working via firewire. I currently need a third party application(if one exists) that can export a ProRes file to DV Tape. I'm about to go through the pain of reinstalling FCS 7, but I've asked a friend to come by with his cam for me to export a program to tape. I reinstalled my OS as a last ditch effort to see if that was the problem, sadly, it wasn't. So I can only conclude that my decks are... swabed.

That's strange then Nick. Almost all my timelines are in a different codec setting. I just figured FCP just plays em back through DV signal which is why all these years I've been able to export my ProRes timeline to mini DV tapes. Premier Pro did it as well...H.264 is another story. Been trying to switch over to FCPX lately so I don't wanna have to reinstall FCP 7 if I don't have to... or Premier for that matter. I don't mind converting the clips to DV but the question still remains, do you guys have any apps to export to tape?

Opening PDF's in IE Browser randomly freeze - Adobe Reader Version 11.0.06

Hi,
We have an Intranet site which has a lot of PDF documents on it, when clicking on the hyperlink for documents the status dialog appears and will randomly freeze and not open the document. Turning the addon off for Adobe Reader so that they open in the Reader interface resolves the problem as does using Chrome or firefox also using Foxit reader resolves the issue.
Has anybody else come across the issue and resolved it? I have attached a screenshot of the status bar showing how it stops randomly at any point.

All I can suggest is that you try a repair of Internet Explorer: http://support.microsoft.com/kb/318378

Xorg randomly freezes

I recently installed Arch Linux on this computer, which hasn't had Linux installed on it before, but Xorg randomly freezes after a hour or so for me, and won't let me switch out into a console, forcing me to use Magic SysRq. Oddly enough, the mouse still works and the cursor moves. The freezes tend to happen if I open a menu, click something on a window, move a slider, etc.
Using Google, I've found that other people had similar problems, using the specific driver that I use, but these posts were from months ago, and apparently is supposed to be fixed by now.
I use the Intel driver and Fluxbox. I tried the EXA, XXA, and UXA accelmethods, but none of them fixed the freezes.
Xorg configuration:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-70
VertRefresh 50-120
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Devic
e"
BusID "PCI:0:2:0"
Option "AccelMethod" "UXA"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection
I would appreciate it if someone helped me resolve this issue, since I like Arch Linux and would like to be able to continue using it.
Last edited by Mugendai (2009-08-22 00:33:40)

The xorglog doesn't seem to show anything new occuring when it freezes, syslog only has data on the system booting and shuting down, errorlog has nothing related.
I'll post the entire xorglog anyway, though I previously deleted it before running Xorg again:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux jadelazuli 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 14 August 2009 11:31:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 21 21:00:21 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xe40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2562:103c:2a00 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xe0000000/134217728, 0xe8100000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xE8100000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HWP", prod id 1259
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "HWP", prod id 1259
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (320, 240) mm
(**) intel(0): DPI set to (101, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x07ffefff: DRI memory manager (123008 kB)
(II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000000b43b000 physical
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007df000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x01000000-0x01004fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 320 x 240
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Optical Mouse
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x07ffefff: DRI memory manager (123008 kB)
(II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000000b43b000 physical
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007df000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x01000000-0x01004fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Optical Mouse: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
I use Xorg version 1.6.3, as shown in the log, Intel driver version 2.7.99.902-1, and kernel version 2.6.30-ARCH.
"Do you know this exactly or just a guessing ?"
A lot of people were talking about how a version of the Intel driver was released to stop the freezing, so I assume Arch Linux would have this version by now.
I have yet to install SSH to remote-login, so I haven't tried killing it, except with Magic SysRq.
The last time Xorg froze, I had just used the command "mmaker -vf Fluxbox" while Fluxbox was running, which made it freeze soon afterwards, so I now think it might be Menu Maker that somehow makes Fluxbox unstable. I was installing a lot of programs for my new installation, and ran it almost every time after I started X to add them to Fluxbox's menu.
Last edited by Mugendai (2009-08-22 19:55:38)

CS3 Exporting to tape HELP!

Hi! I am using Premiere CS3 on Windows XP. I have a Panasonic mini DV camcorder plugged in. I am trying desperately to work out how to export my project to tape. I have the settings okay. I set the 'Assemble at timecode' to 10 seconds. I had recorded 30 seconds of black onto the tape previously. When I click
on 'Record', the camcorder gets itself to 10 seconds, frame by frame, and then stops- and I get a message of 'Recording Failed'.
I've tried it having the camcorder playing and on pause, and also stopped, but on playback setting.
What am I doing wrong?!
PRIZE for anyone who can fix this for me!!!

nope. sorry. to be honest I sorta think I recall that exporting to tape isnt a happening thing with premiere cs3...like it doesnt actually do that...but my memory is not so great as I am losing brain cell function on a regular basis.
is lemonbaden in any way related to baden baden ?.. a great great grandfather came from there ( baden baden ).
though I can't imagine what lemons might have to do with badens.

Only Audio Is Exporting to Tape????

Hi
I am trying to export a sequence to a minidv tape on FCP, using my dvx100a as a deck. I've been able to do this before...only this time, only the audio is exporting to the tape, and the video shows up as just black. When I stop the exporting process, the frame which I exit on shows up on the camera's viewfinder but is not recorded.
Any suggestions on how I can get both video and audio to export to the tape?
Thanks in advance!

Neither of theses suggestions solved my problem...
...maybe somebody could tell me what my ideal A/V Setting should be if i am trying to a simple print to video with a miniDV camera (firewire)...and why only black shows up for video?
the best ive gotten so far is being able to play the video on the timeline and have it show up on the camera...i can hear the audio, but on the camera screen, all that shows up is the 1st frame and it holds as the audio plays.
What is going on!?!?
im really stuck
Thanks!

Random freeze or stop on export to tape

Similar Messages

Maybe you are looking for