Random I/O errors (hdd) and failing to boot, Windows not affected

Question

I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
Partition layout:
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs System Reserved D8B40750B4073094
├─sda2 ntfs 00EA107FEA107360
└─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
sr0
All three are primary partitions. Using ext4 yields the exact same result.
The problem is easy to reproduce:
Install Windows 7 to first half of HDD and Arch on the second half
At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
Windows seems to work just fine
Dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
[ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x9FB7C000 000040
[ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1668MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
[ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
[ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
[ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
[ 0.000000] On node 0 totalpages: 649053
[ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3337 pages used for memmap
[ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 5234680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1630000 - 0xc16be000 ( 568 kB)
.data : 0xc146853a - 0xc162ec80 (1817 kB)
.text : 0xc1000000 - 0xc146853a (4513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1896.408 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20140424
[ 0.009582] ACPI: All ACPI Tables successfully acquired
[ 0.015209] Security Framework initialized
[ 0.015217] Yama: becoming mindful.
[ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015472] Initializing cgroup subsys memory
[ 0.015491] Initializing cgroup subsys devices
[ 0.015498] Initializing cgroup subsys freezer
[ 0.015502] Initializing cgroup subsys net_cls
[ 0.015507] Initializing cgroup subsys blkio
[ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.015531] CPU: Physical Processor ID: 0
[ 0.015532] CPU: Processor Core ID: 0
[ 0.015536] mce: CPU supports 7 MCE banks
[ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
[ 0.016347] ftrace: allocating 19356 entries in 38 pages
[ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.162668] ... version: 0
[ 0.162670] ... bit width: 48
[ 0.162671] ... generic registers: 6
[ 0.162672] ... value mask: 0000ffffffffffff
[ 0.162674] ... max period: 00007fffffffffff
[ 0.162675] ... fixed-purpose events: 0
[ 0.162676] ... event mask: 000000000000003f
[ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
[ 0.186179] x86: Booting SMP configuration:
[ 0.186182] .... node #0, CPUs: #1
[ 0.218942] Initializing CPU#1
[ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
[ 0.226179] #2
[ 0.258736] Initializing CPU#2
[ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
[ 0.266180] #3
[ 0.276300] Initializing CPU#3
[ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.279379] x86: Booted up 1 node, 4 CPUs
[ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
[ 0.280484] devtmpfs: initialized
[ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[ 0.281973] pinctrl core: initialized pinctrl subsystem
[ 0.282053] RTC time: 22:28:26, date: 09/21/14
[ 0.282107] NET: Registered protocol family 16
[ 0.282225] cpuidle: using governor ladder
[ 0.282228] cpuidle: using governor menu
[ 0.282436] ACPI: bus type PCI registered
[ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.282558] PCI: Using MMCONFIG for extended config space
[ 0.282559] PCI: Using configuration type 1 for base access
[ 0.293370] ACPI: Added _OSI(Module Device)
[ 0.293374] ACPI: Added _OSI(Processor Device)
[ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.323484] ACPI: Interpreter enabled
[ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.323519] ACPI: (supports S0 S3 S4 S5)
[ 0.323522] ACPI: Using IOAPIC for interrupt routing
[ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.335971] PCI host bridge to bus 0000:00
[ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
[ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[ 0.336266] pci 0000:00:01.0: supports D1 D2
[ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[ 0.336417] pci 0000:00:01.1: supports D1 D2
[ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
[ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
[ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
[ 0.340177] pci 0000:00:12.2: supports D1 D2
[ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
[ 0.343004] pci 0000:00:13.2: supports D1 D2
[ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.344446] pci 0000:01:00.0: supports D1 D2
[ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
[ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.356487] pci 0000:03:00.0: supports D1 D2
[ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.363129] pci_bus 0000:00: on NUMA node 0
[ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367456] vgaarb: loaded
[ 0.367458] vgaarb: bridge control possible 0000:00:01.0
[ 0.367505] PCI: Using ACPI for IRQ routing
[ 0.369255] PCI: pci_cache_line_size set to 64 bytes
[ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
[ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
[ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
[ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.369516] NetLabel: Initializing
[ 0.369518] NetLabel: domain hash size = 128
[ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369532] NetLabel: unlabeled traffic allowed by default
[ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.371730] Switched to clocksource hpet
[ 0.378213] pnp: PnP ACPI init
[ 0.378231] ACPI: bus type PNP registered
[ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.378841] system 00:04: [io 0x04d6] has been reserved
[ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.378846] system 00:04: [io 0x077a] has been reserved
[ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.378850] system 00:04: [io 0x0c14] has been reserved
[ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.378855] system 00:04: [io 0x0c6c] has been reserved
[ 0.378857] system 00:04: [io 0x0c6f] has been reserved
[ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382206] pnp: PnP ACPI: found 6 devices
[ 0.382211] ACPI: bus type PNP unregistered
[ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
[ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
[ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420484] NET: Registered protocol family 2
[ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.420733] TCP: reno registered
[ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420798] NET: Registered protocol family 1
[ 0.420831] pci 0000:00:01.0: Boot video device
[ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.038759] PCI: CLS 64 bytes, default 64
[ 1.038818] Unpacking initramfs...
[ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
[ 1.112753] Simple Boot Flag at 0x44 set to 0x1
[ 1.113077] perf: AMD NB counters detected
[ 1.113122] LVT offset 0 assigned for vector 0x400
[ 1.113138] perf: AMD IBS detected (0x000000ff)
[ 1.113149] apm: BIOS not found.
[ 1.113200] Scanning for low memory corruption every 60 seconds
[ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.116388] zbud: loaded
[ 1.116669] VFS: Disk quotas dquot_6.5.2
[ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.116962] msgmni has been set to 1707
[ 1.117034] Key type big_key registered
[ 1.117325] bounce: pool size: 64 pages
[ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.117448] io scheduler noop registered
[ 1.117452] io scheduler deadline registered
[ 1.117524] io scheduler cfq registered (default)
[ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.118114] GHES: HEST is not enabled!
[ 1.118129] isapnp: Scanning for PnP cards...
[ 1.513691] isapnp: No Plug & Play device found
[ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514746] rtc_cmos 00:01: RTC can wake from S4
[ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.515246] TCP: cubic registered
[ 1.515386] NET: Registered protocol family 10
[ 1.515657] NET: Registered protocol family 17
[ 1.516096] Using IPI No-Shortcut mode
[ 1.516269] registered taskstats version 1
[ 1.516866] Magic number: 14:856:502
[ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
[ 1.517032] PM: Hibernation image not present or could not be loaded.
[ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
[ 1.517350] Write protecting the kernel text: 4516k
[ 1.517388] Write protecting the kernel read-only data: 1332k
[ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.529660] systemd-udevd[57]: starting version 216
[ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
[ 1.568048] ACPI: bus type USB registered
[ 1.568103] usbcore: registered new interface driver usbfs
[ 1.568141] usbcore: registered new interface driver hub
[ 1.568537] SCSI subsystem initialized
[ 1.574578] usbcore: registered new device driver usb
[ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594746] ehci-pci: EHCI PCI platform driver
[ 1.594935] QUIRK: Enable AMD PLL fix
[ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.595002] ehci-pci 0000:00:12.2: debug port 1
[ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
[ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595830] ohci-pci: OHCI PCI platform driver
[ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.602284] libata version 3.00 loaded.
[ 1.602306] hub 1-0:1.0: USB hub found
[ 1.602325] hub 1-0:1.0: 5 ports detected
[ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.602912] ehci-pci 0000:00:13.2: debug port 1
[ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
[ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.612308] hub 2-0:1.0: USB hub found
[ 1.612317] hub 2-0:1.0: 5 ports detected
[ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.613374] hub 3-0:1.0: USB hub found
[ 1.613388] hub 3-0:1.0: 2 ports detected
[ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.616754] hub 4-0:1.0: USB hub found
[ 1.616768] hub 4-0:1.0: 2 ports detected
[ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
[ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.673072] hub 5-0:1.0: USB hub found
[ 1.673098] hub 5-0:1.0: 5 ports detected
[ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
[ 1.729803] hub 6-0:1.0: USB hub found
[ 1.729831] hub 6-0:1.0: 5 ports detected
[ 1.730166] ahci 0000:00:11.0: version 3.0
[ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.731131] scsi0 : ahci
[ 1.731321] scsi1 : ahci
[ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
[ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
[ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
[ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
[ 2.218438] ata2.00: configured for UDMA/133
[ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.318651] ata1.00: configured for UDMA/133
[ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
[ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.338885] sda: sda1 sda2 sda3
[ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 2.438989] ata1.00: irq_stat 0x40000008
[ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
[ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 2.439127] ata1.00: status: { DRDY ERR }
[ 2.439166] ata1.00: error: { ICRC ABRT }
[ 2.439207] ata1: hard resetting link
[ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586950] usbcore: registered new interface driver usbhid
[ 2.586953] usbhid: USB HID core driver
[ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
[ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
[ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
[ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
[ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.039928] ata1.00: configured for UDMA/133
[ 3.039955] ata1: EH complete
[ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
[ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
[ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
[ 3.089128] ata1.00: irq_stat 0x40000008
[ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
[ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.089265] ata1.00: status: { DRDY ERR }
[ 3.089304] ata1.00: error: { ICRC ABRT }
[ 3.089346] ata1: hard resetting link
[ 3.115583] Switched to clocksource tsc
[ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.694602] ata1.00: configured for UDMA/133
[ 3.694621] ata1: EH complete
[ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
[ 3.809168] ata1.00: irq_stat 0x40000008
[ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
[ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.809305] ata1.00: status: { DRDY ERR }
[ 3.809343] ata1.00: error: { ICRC ABRT }
[ 3.809385] ata1: hard resetting link
[ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.404835] ata1.00: configured for UDMA/133
[ 4.404858] ata1: EH complete
[ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
[ 4.453760] ata1.00: irq_stat 0x40000008
[ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
[ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
[ 4.453894] ata1.00: status: { DRDY ERR }
[ 4.453932] ata1.00: error: { UNC }
[ 4.637639] ata1.00: configured for UDMA/133
[ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
[ 4.637691] sd 0:0:0:0: [sda]
[ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
[ 4.637695] sd 0:0:0:0: [sda]
[ 4.637697] Sense Key : 0x3 [current] [descriptor]
[ 4.637700] Descriptor sense data with sense descriptors (in hex):
[ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 4.637710] 00 00 09 b8
[ 4.637714] sd 0:0:0:0: [sda]
[ 4.637716] ASC=0x11 ASCQ=0x4
[ 4.637718] sd 0:0:0:0: [sda] CDB:
[ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
[ 4.637727] end_request: I/O error, dev sda, sector 2488
[ 4.637786] Buffer I/O error on device sda1, logical block 55
[ 4.637826] Buffer I/O error on device sda1, logical block 56
[ 4.637866] Buffer I/O error on device sda1, logical block 57
[ 4.637905] Buffer I/O error on device sda1, logical block 58
[ 4.637945] Buffer I/O error on device sda1, logical block 59
[ 4.637984] Buffer I/O error on device sda1, logical block 60
[ 4.638024] Buffer I/O error on device sda1, logical block 61
[ 4.638063] Buffer I/O error on device sda1, logical block 62
[ 4.638105] Buffer I/O error on device sda1, logical block 63
[ 4.638188] ata1: EH complete
[ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
[ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
[ 4.879364] ata1.00: irq_stat 0x40000008
[ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
[ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 4.879502] ata1.00: status: { DRDY ERR }
[ 4.879540] ata1.00: error: { ICRC ABRT }
[ 4.879583] ata1: hard resetting link
[ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 5.469816] ata1.00: configured for UDMA/133
[ 5.469845] ata1: EH complete
[ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 5.582859] ata1.00: irq_stat 0x40000008
[ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
[ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 5.582997] ata1.00: status: { DRDY ERR }
[ 5.583036] ata1.00: error: { ICRC ABRT }
[ 5.583078] ata1: hard resetting link
[ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.191135] ata1.00: configured for UDMA/133
[ 6.191166] ata1: EH complete
[ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
[ 6.256073] ata1.00: irq_stat 0x40000008
[ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
[ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.256212] ata1.00: status: { DRDY ERR }
[ 6.256250] ata1.00: error: { ICRC ABRT }
[ 6.256292] ata1: hard resetting link
[ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.845773] ata1.00: configured for UDMA/133
[ 6.845806] ata1: EH complete
[ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
[ 6.986223] ata1.00: irq_stat 0x40000008
[ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
[ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.986360] ata1.00: status: { DRDY ERR }
[ 6.986399] ata1.00: error: { ICRC ABRT }
[ 6.986440] ata1: hard resetting link
[ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.578097] ata1.00: configured for UDMA/133
[ 7.578124] ata1: EH complete
[ 7.587216] random: nonblocking pool is initialized
[ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
[ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[ 7.602850] ata1.00: irq_stat 0x40000008
[ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
[ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 7.602982] ata1.00: status: { DRDY ERR }
[ 7.603020] ata1.00: error: { ICRC ABRT }
[ 7.603061] ata1: hard resetting link
[ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.188490] ata1.00: configured for UDMA/133
[ 8.188517] ata1: EH complete
[ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
[ 8.216361] ata1.00: irq_stat 0x40000008
[ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
[ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.216500] ata1.00: status: { DRDY ERR }
[ 8.216539] ata1.00: error: { ICRC ABRT }
[ 8.216581] ata1: hard resetting link
[ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.809726] ata1.00: configured for UDMA/133
[ 8.809758] ata1: EH complete
[ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
[ 8.836295] ata1.00: irq_stat 0x40000008
[ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
[ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.836429] ata1.00: status: { DRDY ERR }
[ 8.836467] ata1.00: error: { ICRC ABRT }
[ 8.836507] ata1: hard resetting link
[ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.430994] ata1.00: configured for UDMA/133
[ 9.431018] ata1: EH complete
[ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 9.837542] ata1.00: irq_stat 0x40000008
[ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
[ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 9.837680] ata1.00: status: { DRDY ERR }
[ 9.837719] ata1.00: error: { ICRC ABRT }
[ 9.837761] ata1: hard resetting link
[ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.515900] ata1.00: configured for UDMA/133
[ 10.515972] sd 0:0:0:0: [sda]
[ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
[ 10.515978] sd 0:0:0:0: [sda]
[ 10.515979] Sense Key : 0xb [current] [descriptor]
[ 10.515983] Descriptor sense data with sense descriptors (in hex):
[ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 10.515992] 5e 89 08 20
[ 10.515997] sd 0:0:0:0: [sda]
[ 10.515998] ASC=0x47 ASCQ=0x0
[ 10.516001] sd 0:0:0:0: [sda] CDB:
[ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
[ 10.516010] end_request: I/O error, dev sda, sector 1586038816
[ 10.516148] ata1: EH complete
[ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
[ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
[ 10.529786] ata1.00: irq_stat 0x40000008
[ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
[ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 10.529924] ata1.00: status: { DRDY ERR }
[ 10.529962] ata1.00: error: { ICRC ABRT }
[ 10.530004] ata1: hard resetting link
[ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.139673] ata1.00: configured for UDMA/100
[ 11.139723] sd 0:0:0:0: [sda]
[ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
[ 11.139728] sd 0:0:0:0: [sda]
[ 11.139730] Sense Key : 0xb [current] [descriptor]
[ 11.139733] Descriptor sense data with sense descriptors (in hex):
[ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.139743] 5e 89 08 d4
[ 11.139747] sd 0:0:0:0: [sda]
[ 11.139749] ASC=0x47 ASCQ=0x0
[ 11.139751] sd 0:0:0:0: [sda] CDB:
[ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
[ 11.139761] end_request: I/O error, dev sda, sector 1586038992
[ 11.139889] ata1: EH complete
[ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
[ 11.153169] ata1.00: irq_stat 0x40000008
[ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
[ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.153306] ata1.00: status: { DRDY ERR }
[ 11.153345] ata1.00: error: { ICRC ABRT }
[ 11.153386] ata1: hard resetting link
[ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.749884] ata1.00: configured for UDMA/100
[ 11.749918] sd 0:0:0:0: [sda]
[ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
[ 11.749923] sd 0:0:0:0: [sda]
[ 11.749925] Sense Key : 0xb [current] [descriptor]
[ 11.749928] Descriptor sense data with sense descriptors (in hex):
[ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.749938] 5e 89 08 28
[ 11.749942] sd 0:0:0:0: [sda]
[ 11.749944] ASC=0x47 ASCQ=0x0
[ 11.749946] sd 0:0:0:0: [sda] CDB:
[ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
[ 11.749956] end_request: I/O error, dev sda, sector 1586038824
[ 11.750093] ata1: EH complete
[ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 11.763206] ata1.00: irq_stat 0x40000008
[ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
[ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.763343] ata1.00: status: { DRDY ERR }
[ 11.763382] ata1.00: error: { ICRC ABRT }
[ 11.763424] ata1: hard resetting link
[ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.360321] ata1.00: configured for UDMA/100
[ 12.360370] sd 0:0:0:0: [sda]
[ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
[ 12.360375] sd 0:0:0:0: [sda]
[ 12.360377] Sense Key : 0xb [current] [descriptor]
[ 12.360380] Descriptor sense data with sense descriptors (in hex):
[ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.360390] 5e 89 08 c8
[ 12.360394] sd 0:0:0:0: [sda]
[ 12.360395] ASC=0x47 ASCQ=0x0
[ 12.360398] sd 0:0:0:0: [sda] CDB:
[ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
[ 12.360407] end_request: I/O error, dev sda, sector 1586038984
[ 12.360543] ata1: EH complete
[ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.370005] ata1.00: irq_stat 0x40000008
[ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
[ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.370143] ata1.00: status: { DRDY ERR }
[ 12.370182] ata1.00: error: { ICRC ABRT }
[ 12.370224] ata1: hard resetting link
[ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.959379] ata1.00: configured for UDMA/100
[ 12.959426] sd 0:0:0:0: [sda]
[ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
[ 12.959432] sd 0:0:0:0: [sda]
[ 12.959433] Sense Key : 0xb [current] [descriptor]
[ 12.959437] Descriptor sense data with sense descriptors (in hex):
[ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.959447] 63 89 08 3a
[ 12.959462] sd 0:0:0:0: [sda]
[ 12.959464] ASC=0x47 ASCQ=0x0
[ 12.959466] sd 0:0:0:0: [sda] CDB:
[ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
[ 12.959476] end_request: I/O error, dev sda, sector 1669924920
[ 12.959616] ata1: EH complete
[ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
[ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.973247] ata1.00: irq_stat 0x40000008
[ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
[ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.973384] ata1.00: status: { DRDY ERR }
[ 12.973423] ata1.00: error: { ICRC ABRT }
[ 12.973464] ata1: hard resetting link
[ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.569691] ata1.00: configured for UDMA/33
[ 13.569750] sd 0:0:0:0: [sda]
[ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
[ 13.569755] sd 0:0:0:0: [sda]
[ 13.569757] Sense Key : 0xb [current] [descriptor]
[ 13.569761] Descriptor sense data with sense descriptors (in hex):
[ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 13.569771] 5e 89 08 c0
[ 13.569775] sd 0:0:0:0: [sda]
[ 13.569777] ASC=0x47 ASCQ=0x0
[ 13.569779] sd 0:0:0:0: [sda] CDB:
[ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
[ 13.569789] end_request: I/O error, dev sda, sector 1586038976
[ 13.569933] ata1: EH complete
[ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
[ 13.583360] ata1.00: irq_stat 0x40000008
[ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
[ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 13.585478] ata1.00: status: { DRDY ERR }
[ 13.585516] ata1.00: error: { ICRC ABRT }
[ 13.585558] ata1: hard resetting link
[ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.180020] ata1.00: configured for UDMA/33
[ 14.180069] sd 0:0:0:0: [sda]
[ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
[ 14.180074] sd 0:0:0:0: [sda]
[ 14.180076] Sense Key : 0xb [current] [descriptor]
[ 14.180079] Descriptor sense data with sense descriptors (in hex):
[ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.180089] 63 89 08 30
[ 14.180094] sd 0:0:0:0: [sda]
[ 14.180095] ASC=0x47 ASCQ=0x0
[ 14.180098] sd 0:0:0:0: [sda] CDB:
[ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
[ 14.180108] end_request: I/O error, dev sda, sector 1669924912
[ 14.180245] ata1: EH complete
[ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
[ 14.190153] ata1.00: irq_stat 0x40000008
[ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
[ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.190290] ata1.00: status: { DRDY ERR }
[ 14.190328] ata1.00: error: { ICRC ABRT }
[ 14.190371] ata1: hard resetting link
[ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.779168] ata1.00: configured for UDMA/33
[ 14.779214] sd 0:0:0:0: [sda]
[ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
[ 14.779218] sd 0:0:0:0: [sda]
[ 14.779220] Sense Key : 0xb [current] [descriptor]
[ 14.779223] Descriptor sense data with sense descriptors (in hex):
[ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.779233] 63 89 08 80
[ 14.779237] sd 0:0:0:0: [sda]
[ 14.779239] ASC=0x47 ASCQ=0x0
[ 14.779241] sd 0:0:0:0: [sda] CDB:
[ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
[ 14.779251] end_request: I/O error, dev sda, sector 1669924976
[ 14.779391] ata1: EH complete
[ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
[ 14.793513] ata1.00: irq_stat 0x40000008
[ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
[ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.793651] ata1.00: status: { DRDY ERR }
[ 14.793690] ata1.00: error: { ICRC ABRT }
[ 14.793733] ata1: hard resetting link
[ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.378218] ata1.00: configured for UDMA/33
[ 15.378240] sd 0:0:0:0: [sda]
[ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
[ 15.378245] sd 0:0:0:0: [sda]
[ 15.378247] Sense Key : 0xb [current] [descriptor]
[ 15.378250] Descriptor sense data with sense descriptors (in hex):
[ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.378260] 63 89 08 28
[ 15.378264] sd 0:0:0:0: [sda]
[ 15.378266] ASC=0x47 ASCQ=0x0
[ 15.378268] sd 0:0:0:0: [sda] CDB:
[ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
[ 15.378277] end_request: I/O error, dev sda, sector 1669924904
[ 15.378427] ata1: EH complete
[ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
[ 15.390148] ata1.00: irq_stat 0x40000008
[ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
[ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.390285] ata1.00: status: { DRDY ERR }
[ 15.390324] ata1.00: error: { ICRC ABRT }
[ 15.390366] ata1: hard resetting link
[ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.977410] ata1.00: configured for UDMA/33
[ 15.977500] ata1: EH complete
[ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
[ 15.986916] ata1.00: irq_stat 0x40000008
[ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
[ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.987054] ata1.00: status: { DRDY ERR }
[ 15.987093] ata1.00: error: { ICRC ABRT }
[ 15.987135] ata1: hard resetting link
[ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.576437] ata1.00: configured for UDMA/33
[ 16.576509] sd 0:0:0:0: [sda]
[ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
[ 16.576514] sd 0:0:0:0: [sda]
[ 16.576516] Sense Key : 0xb [current] [descriptor]
[ 16.576519] Descriptor sense data with sense descriptors (in hex):
[ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 16.576529] 63 89 08 20
[ 16.576533] sd 0:0:0:0: [sda]
[ 16.576534] ASC=0x47 ASCQ=0x0
[ 16.576537] sd 0:0:0:0: [sda] CDB:
[ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
[ 16.576546] end_request: I/O error, dev sda, sector 1669924896
[ 16.576642] ata1: EH complete
[ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
[ 16.586847] ata1.00: irq_stat 0x40000008
[ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
[ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 16.586980] ata1.00: status: { DRDY ERR }
[ 16.587018] ata1.00: error: { ICRC ABRT }
[ 16.587058] ata1: hard resetting link
[ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.175907] ata1.00: configured for UDMA/33
[ 17.175963] sd 0:0:0:0: [sda]
[ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
[ 17.175968] sd 0:0:0:0: [sda]
[ 17.175970] Sense Key : 0xb [current] [descriptor]
[ 17.175973] Descriptor sense data with sense descriptors (in hex):
[ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 17.175983] 5e 89 08 54
[ 17.175987] sd

Answer 1

I have only Arch installed, 64 bit, UEFI boot.
The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
Sep 24 06:13:59 kernel: ata6: hard resetting link
Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:13:59 kernel: 00 00 0e 87
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
Sep 24 06:13:59 kernel: ata6: EH complete
Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6: hard resetting link
Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
and so on... It somehow booted, but now journalctl says:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
while the Error hasn't occured yet.
I think I wil take the emergency procedure, and start backing up my files and system ...
I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.