Random lock ups on iPod Touch 8GB

Out of the blue, my ipod screen will go almost completely black. You can barely see the screen that you were on and it becomes unresponsive. It will then show a black screen with the apple logo, but nothing more. I did a restore on it and removed all my extra apps, etc. It was good for almost a week, but tonight it did the same thing again! Please help!!! Any ideas? It is no longer under warranty.

In order to isolate the cause of these lock downs it is going to be necessary for you to backup your data first. Please let us know when this is done, and we can proceed?

Similar Messages

  • I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    The previous responses did not say how to place in recovery mode or DFU mode

  • New ipod touch 8gb. Freezing itunes

    I got a new 3rd gen ipod touch (8gb) just then.
    I plug it in to my computer go on itunes and go through the steps. Then I reach the last point which says: set up your ipod
    then it has name
    automatically sync songs to my ipod
    automatically sync photos to my ipod
    automatically sync applications.
    Then there is a done button.
    When I press the done button, itunes just freezes. I have to go task manager and kill the process.
    Can anyone help!?!?! How do I get past this stage!!
    My system specs:
    Core i5 750
    Gigabyte P55-UD4P (it is a P55 board)
    HD4850.
    The rest probably doesn't matter but if you need it just ask.

    OK, so I think I've got this problem solved, albeit it's not a very good solution.
    Firstly, I uninstalled every single piece of Apple related software on my PC.
    I then restored my iPod for the third time, although I don't think this will make much of a difference.
    I then tried doing the Setup Your iPod screen again where you name it, and it froze. So I thought, "Hey, let's try it on my girlfriend's iTunes." I did, and it worked. I then brought it back over to my PC and it was registered properly. I then tried to sync music and no issues whatsoever, but because it wasn't originally registered to this PC, it wasn't the best solution.
    So then I told iTunes to lock the iPod down to the iTunes on this PC (the one that wasn't working). It worked, but then when I tried to sync it froze up at the end of syncing, at the end of the very last song. I figured, let's try something random as a workaround: I add the songs manually to the iPod Touch but I cancel the sync at the very last song - it works! This means that it will be a bit of a pain to sync songs (I will probably have to make a few fake song files so that it will be able to sync my whole library) but this is much better than it not working at all, or having to use the iTunes program on my gf's laptop and have a second library and login there, while using files off of the network which will add to syncing time/be a hassle.
    So, it's not the best solution, but it works. Please let me know how it works for you.

  • Como puedo hacer para que la informacion del ipod touch 8GB en tre a mi PC por fafor ayuden me

    Como puedo Hacer para que la informacion del ipod touch 8Gb entre a mi PC ayudenme gracias.

    Google translate:
    Buy an iPod touch 5G in best buy last week in NY, when he returns to Argentina, the iPod is linked to an ID (d. ... @ yahoo.com) I do not know, so when I want to start using it, I ask for a 4 digit passcode tengo.y nor ultimately remains locked.
    Try to unlock it in various ways but always come back to be immobilized on the same screen asking me the key ID do not know.
    Nor can I activate it from the itunes because I associated the ipod back to that ID not know. Is there any way to unlock your ipod?
    From already thank you very much!
    Contact the personel with that email addess and ask then for the password so you can unlock the iPod.
    That is a new feature added by iOS 7.
    See:
    iCloud: Find My iPhone Activation Lock in iOS 7

  • Blue Screen when I plug my Ipod Touch 8GB(Late 2009)

    My problem is when I plug my Ipod touch 8gb to my laptop(Acer Aspire 5632wlmi,intel core 2 duo processor T5200-1,60 GHz-533MHz L2 cache,1GBDDR 2,Up to 384MB NVIDIAGeForce GO7300 TurboCache,System: Microsoft XP Professional Version 2002 Service Pack 3,all required updates are done),the windows system detects problem and windows shuts down to prevent damage to my computer,this error message appears in blue screen with the technical information of :
    *Stop : 0x00000007E(0x0000005,0X00000000,0xF78FD7C8,0XF78FD4C4) .
    When the system goes down,I have to shut pc down from the power button and when I switch my laptop on I receive an error stating that "system has recovered from a serious error " which has signature of:
    BCCode : 1000007E BCP1:C000005 BCP2:00000000 BCP3:78FD7C8 BCP4:F78FD4C4 OSVer: 512600 Product:256_1
    And error report content is:
    C:\DOCUME~1FATIHF~1\LOCALS~1\Temp\WERffa3.dir00\Mini031610-02.dmp
    C:\DOCUME~1FATIHF~1\LOCALS~1\Temp\WERffa3.dir00\sysdata.xml
    What I have done regarding to try to solve the problem ,but not worked at all:
    1-I have uninstalled Itunes ultimate version(iTunes 9.0.3 for Windows XP,Vista or Windows 7) and other Apple related components on my Laptop(apple application support,Apple mobile device support,Apple Software Support,Quicktime etc.)
    2- a-I re-installed all components mentioned on step 1 and plugged my Ipod: It works when I plug for first time,then I sync with my audio,art-work folders.Then I unplug my Ipod to listen music and see my Art-work,when I plug my Ipod for 2nd time to my Laptop,it crashes and that same blue screen error occurs.
    b- I uninstalled all Apple components and plugged my Ipod to my Laptop,it charges the battery but no blue screen occurs.
    3- I reset my Ipod and meanwhile uninstall all Apple components again(exactly like in 1st step) in my laptop,then I re-install all components to my laptop, and follow the same steps as exactly in 2nd step.I plug my Ipod and it works for first time,than I do sync through Itunes again,than I unplug and use my Ipod,when I plug for 2nd time than the same blue screen error appears and laptop crashes.
    4- a- I reset my Ipod and Meanwhile uninstalled all Apple components,I re-installed iTunes 8.2.1 for Windows XP,Vista or Windows 7) but the same blue screen occurs.
    b- I uninstall iTunes and plugged my Ipod to my laptop,no blue screen occurs.
    5- I asked my colleague who has MacBook and plug my Ipod to her MacBook, than open Itunes,but Itunes(iTunes 9.0.3 for Mac OS x) can not see my Ipod as device and I am not able to do anything.
    6- I've searched in Apple official websites and Google and many Blogger sites,Fan sites and all other possible technical sites but could not find any solution.
    7- I've contacted(phone call) to the Local(Portugal) Support Apple Support Centre and explained all history of the problem clearly.But they could not help me,they advised the same possible solutions which I've already done and they said that they can not do more.And than they gave me a support mail address to contact.([email protected])
    8- I've sent an email to [email protected], 2 days later they've answered me with the information that they are phone based support therefore they not provide me support.
    Basically I am not able to import or export anything to/from my ipod,anyway all windows is going down.
    It is first time I buy Apple product.My friends who have Apple products were generally positive about them,and I was thinking to by a MacBook as well,but after this problem I got doubts and I am not satisfied and happy at all. Since days I am trying to find solutions and find the exact support contacts to get helped with this problem.But could not reach any information. Now I don't have any positive Idea about Apple products or support service.I went to the Techno-Market which I bought the Ipod to change with an Iphone or at least try to have my money back if not possible to swap it with Iphone,but they've told me that it has been more than 15 days and they can not swap it or refund it,even if it was possible they would not refund it because the very sensitive backside of Ipod has some small but visible scratches.
    Anyway I can see the difficulty of having Apple product,having support of product and finding the right contacts to communicate is not easy and I would really be very happy if anyone could change this idea of mine with helping me out to use my Ipod with peace and without any other problem.
    As you can see,I spent a lot of money to buy it and spent days to find solution to my problem and spent a lot of energy to find right Apple Support contacts to help me with my problem.And I am not able to use my product as I wish.
    Please advise me regarding to solve my problem. I hate to deal with courts and other legal ways to take action in those kind of cases. But if not of course it will be my last option to do it so.
    I am waiting an answer,please try to answer me as soon as you have an answer for me.
    Thanks In advance
    Best Regards
    PS:If you provide me an email address which I can send all print screens and full blue screen error message .txt I'll contact you soon after receiving your contact.
    Fatih
    [email protected]

    Have you tried the following document, kohida?
    [What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch|http://support.apple.com/kb/TS1502]

  • Random Lock ups

    I'm using K9N2-SLI plat with Bios 3.5, AMD64 X2 6400+ Black Ed., 4GB ram (2x2GB Cas 4-4-4-12 T2 matched set), XFX 8800GTS(92) 512, Corsair TX650, Artic Cooler Freezer64 CPU H/S running Vista64 Home Premium Sp2. I'm having random lock-ups during 3D games. Sometimes it locks up after 30 mins in game or sometimes it locks up after days of playing, I can't get it to reproduce the lock up at will. I have read alot of post about this motherboard and it seems it comes down to power supply. I had a New Apevia Beast 2 rail system but after reading the posts I returned it for new Corsair TX650. At full load CPU cores never go above 47c and Idles around 30-31. Ran mem test over night with no errors. Did notice in Mem Test it stated Ram was set at Cas 4-5-5-18 T2. I went to BIOS and set the mem for Volt 2.0 Cas 4-4-4-12 T2. This did reduce the lock-ups to the point I thought I had it fixed. Than today I locked up twice. When it locks up computer becomes unresponsive last sound repeats for few seconds and the only way to resume is to press restart button. I have tried with Cool n'quite on and off, DOT is never been on. Computer runs fine in 2d operations. It's only when I go into 3d games. Video Card has been tested in other machine and is working fine. My game sometime requires me to stay logged in over night to Sell goods. Every morning this last week computer has froze sometime during the night. Crysis plays fine for hours, It seems it happens in not so demanding games, Aion, Knight Online and Wow. All power plugs are plugged, fresh install of Vista, Newest drivers from web site, Bios update via the Forum USB key app. Would really like a reliable computer. What am I missing? Let me know if you need any other info.

    OK I ran single stick and it locked up quicker. I went to BIOS used optimized defaults with only changing the volts to 2.0. and it locked up again. It's lockups seem longer if I change mem setting to 4-4-4-12 T2. I used CPU Z and noticed few things.
    The memory report from CPU-Z:
    DIMM #            1
       SMBus address      0x50
       Memory type      DDR2
       Module format      Regular UDIMM
       Manufacturer (ID)   A-Data Technology (7F7F7F7FCB000000)
       Size         2048 MBytes
       Max bandwidth      PC2-6400 (400 MHz)
       Part number      EXTREME DDR2 800+
       Number of banks      2
       Data width      64 bits
       Correction      None
       Nominal Voltage      1.80 Volts
       EPP         yes (2 profiles)
       XMP         no
    JEDEC timings table      CL-tRCD-tRP-tRAS-tRC @ frequency
       JEDEC #1      3.0-3-3-9-12 @ 200 MHz
       JEDEC #2      4.0-4-4-12-16 @ 266 MHz
       JEDEC #3      5.0-5-5-18-23 @ 400 MHz
    EPP timings table      CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
       EPP profile #1 (full)   4.0-4-4-12-22-2T @ 400 MHz (2.000 Volts)
       EPP profile #2 (full)   4.0-4-4-11-20-2T @ 400 MHz (2.000 Volts)
    since I was using EPP profile 1 I noticed that motherboard is running my memory at 4-4-4-12-24(EPP profile shows should be 22)-2T. Should I change to match memory? or should I try JEDEC #3 @ 400MHZ
    Next thing I noticed was The chipset is stated as 740a not the 750a
    Chipset
    Northbridge      NVIDIA nForce 740a SLI rev. A2
    Southbridge      NVIDIA nForce 740a SLI MCP rev. A2
    Graphic Interface      PCI-Express
    PCI-E Link Width      x16
    PCI-E Max Link Width   x16
    Memory Type      DDR2
    Memory Size      4096 MBytes
    Channels         Dual
    Memory Frequency              400.0 MHz (CPU/7)
    CAS# latency (CL)              4.0
    RAS# to CAS# delay (tRCD)   4
    RAS# Precharge (tRP)           4
    Cycle Time (tRAS)               12
    Bank Cycle Time (tRC)          24
    Command Rate (CR)             2T
    I've tried loser setting 5-5-5-18 and still locks up.

  • P6N-SLI-FI Random Lock-ups

    Hi,
    New build listed below.  Works great 99% of the time.  The only issue I have is infrequent random lock-ups.  The lock-ups occur either during windows start-up, or randomly while doing some non-stressing task (like web browsing or word processing).  Currently at 2.4GHz, but have had it higher.  I lowered it to 2.4 to see if it made any difference, but it seems about the same.
    Since "lock-up" can mean a lot of different things I will describe it.  The screen freezes totally.  Does not respond to any input (CTR-ALT-DEL) etc.  It often seems to occur in the middle of HDD access, and the HDD light stays on continuously.  Hard reset is required to fix.
    It has not locked up during a game, burning or transcoding a DVD or when running any stress tests.  It happens VERY INFREQUENTLY (I just had my first one in about a week) and is not repeatable.  The only other bit of info I can come up with is that is seems that it usually occurs during HDD access, and the HDD light is stuck on.
    I almost wish I had the problem more often.  If I had this problem regularly I would feel pretty comfortable troubleshooting, but as it is I could spend a lot of time changing things around and "think" I fixed it only to have it come back a week later.
    My thoughts are either a RAM issue or my PSU.  Thoughts?

    Quote from: JoeFriday on 20-March-07, 12:18:23
    Hi,
    New build listed below.  Works great 99% of the time.  The only issue I have is infrequent random lock-ups.  The lock-ups occur either during windows start-up, or randomly while doing some non-stressing task (like web browsing or word processing).  Currently at 2.4GHz, but have had it higher.  I lowered it to 2.4 to see if it made any difference, but it seems about the same.
    Since "lock-up" can mean a lot of different things I will describe it.  The screen freezes totally.  Does not respond to any input (CTR-ALT-DEL) etc.  It often seems to occur in the middle of HDD access, and the HDD light stays on continuously.  Hard reset is required to fix.
    It has not locked up during a game, burning or transcoding a DVD or when running any stress tests.  It happens VERY INFREQUENTLY (I just had my first one in about a week) and is not repeatable.  The only other bit of info I can come up with is that is seems that it usually occurs during HDD access, and the HDD light is stuck on.
    I almost wish I had the problem more often.  If I had this problem regularly I would feel pretty comfortable troubleshooting, but as it is I could spend a lot of time changing things around and "think" I fixed it only to have it come back a week later.
    My thoughts are either a RAM issue or my PSU.  Thoughts?
    Do you have all the necessary options for overclocking disabled, C1E, EIST, all the spread spectrums. Also what are your cpu voltage and NB voltage set at...those two seem to have the most effect on system stability when ocing. Also what are your memory settings... I have your same memory and it refuses to work at anything but its advertised setting (800mhz at 4-4-4-15)

  • I forgot my passcode lock for the ipod touch 4th generation. How can i make a new one?

    I forgot my passcode lock for the ipod touch 4th generation. How can i make a new one?

    If you cannot remember the passcode, you will need to restore your device on the computer that you Usually Sync with...
    http://support.apple.com/kb/HT1808

  • My ipod touch 8gb won't turn on, recognize a charge and nothing will pull on up the computer. I have only had it for about 8 months.

    My ipod touch 8gb won't turn on, recognize a charge and when I plug everything in nothing comes p on the computer. I've had it for about 8 months and took really god care of it.

    Try:
    iOS: Not responding or does not turn on
    If not successful, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    OR use this method
    1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
    2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
    3.You may let go when you see the silver Applelogo.
    Thats all Folks!!

  • My Ipod touch 8GB cannot turn on

    My Ipod touch 8GB cannot turn on even when I press the home button and sleep/wake up button together as instructed. It keeps on showing the sign whereby need to connect to Itunes. However, we connected it but it still does not turn on and the home screen never came up! >_<

    Is it still charging? If yes, make sure it has been charged for at least 15min, then connect in recovery mode, explained in this article: iOS: Unable to update or restore

  • My ipod touch 8GB crashes my PC when trying to sync in itunes

    Start up computer, plug in ipod, itunes open up, begins to sync ipod touch 8GB then crashes PC without any warning - just turns it off, no restart.
    Any ideas how to rectify it?
    My daughter has 198 'saved' photos (screen shots) - would that have anything to do with it?
    Thanks for your help.

    crashes PC without any warning - just turns it off, no restart.
    Even though you're not getting a restart with this, have you worked throuh the followin document in the course of your troubleshooting to date?
    [What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch|http://support.apple.com/kb/TS1502]

  • My ipod touch 8gb has a blank white screen what do i do

    hello i need help with my ipod touch 8gb 3rd geniration i dont no how to spell gen. because the screen turned white when i did nothing i tried pushing the awake/sleep  button with the home menu buttton it did not work eny ideas

    Please don't use the over-sized bolded font.  It's annoying and, honestly, offensive.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

    I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings If yu can see the screen enough to do it)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have a ipod touch 8gb when i plug it in to charge it just blinks from the apple screen to the battery screen but will not charge what could be wrong it was fine yesterday?

    I have a ipod touch 8gb . When I plug it in to charge it just blinks from the apple screen to the battery screen what could be wrong?

    Maybe:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How can I install CE 7.1 on Win XP Home?

    Hello everyone, I am a newbie!! I have made several attempts to install CE 7.1 on my XP Home OS but each time I get this error which is frustrating: An error occurred while processing option SAP NetWeaver CE Developer Edition > Install SAP NetWeaver

  • What details do i fill in on my iphone 4 to get wifi when out

    how do i get wifi when out away from router

  • OraOps.dll

    I have installed the odp.net beta into a 9.2 Oracle home. However on testing the product with Visual Studio .net I get the error shown below. System.DllNotFoundException: Unable to load DLL (OraOps.dll). at Oracle.DataAccess.Client.OpsSql.AllocSqlVal

  • UCCX 10.0 Finesse Supervisor Calls in Queue

    I hope I'm missing something because this seems too easy.  How does the Supervisor see how many calls are waiting in queue in real time using Finesse?  I tried to use the Queue Gadget URL but I'm thinking this is only for UCCE and not UCCX. Thanks, D

  • Still can't install

    SB CS4 is here and I am still trying to install SB CS3. I actually gave up and tossed it on my desk and left it there. I downloaded Microsoft upgrades and fixes but I still can't install this. What a waste of money. The last time I asked about how to