Random memory errors and resetting

Hello folks
I've got a KT4V motherboard and an Athatlon 1800 XP. The problem is that I keep getting occasional memory errors or the machine will just reset. (';(')
The problems don't occur with any perticular program or after any perticualr period of time. It can be running all day on full load and then pop, it resets or gives me a memory error
My system temperature under full load is 45 C. With the system temperature around 30 C. So it's not an overheating problem. I've reinstalled win2k twice with no effect. I've installed the registry patch from the AMD website for systems using XP processors and AGP cards. My powerpack is 350W but it says pentium 4 ready so I guess it should work with my systms power requirements. I Have a heatsink for XP 2000+ and above as well as two extractor fans on the case. But they don't add much load.
Any Ideas

Hello
My specs
MSI KT4V
AMD 1800+
Dlink DE 528 PCI (cable modem)
Maxtor 10GB HD (don't know model off top of my head)
ASUS V8170 Magic GeForce 4
I've reinstalled windows for the nth time and this time I've taken APIC off in the bios. (That's not the power management thing)
So far it hasn't reset. Although given the nature of the problem It'll be a couple of days testing before I can be absolutly sure.
As for the powerpack. It gives a combined rating on the side and it's 200W for the 5 and 3.3V rails.

Similar Messages

RoboHelp 9 gives an out of memory error and crashes when I try to import or link a Frame 10 file or

I have Tech Suite 3. If I start a new RoboHelp project and try to import or link Frame files, RoboHelp tries for a while, then I get an Out of Memory error and the program crashes.
I opened one of the sample projects and was able to link to one of my frame files without any problem, so it seems to be an issue with creating something new.
Any suggestions?

It happens when I create a new project and then try to import or link frame docs to make up the content. It starts scanning, then crashes. I did get it to the conversion setting page once, but no further.
It does not happen if I open one of the supplied example projects and link a file. But then it doesn't let me choose, during import, any style mapping. And I can't delete the sample project fold
Twice now it has told me when I tried to import (not link, but import) that my .fm file could not be opened, and told me to verify that Frame is installed (it is) and that the file is a valid frame file (it is).
The docs and project are in separate folders on my C: drive.

Added ram to mac pro, get ecc memory error and 4mem/9/40000006: B:0 C:0 R:0

I recently purchased a 2.8 8 core Mac pro (early '08 model). It came shipped with 2gigs of ram (one gig on riser card a, one gig on riser b).
I purchased 2 1gig sticks from ramjet, i followed a apple tutorial and installed the 2 original sticks in riser card A (slots 1 and 2), and the 2 new Ramjet sticks in riser card B (slots 1 and 2) for a total of 4gigs.
When I powered on the computer everything was fine, clicked the black apple logo to view "about this mac" and the 4gigs total memory showed up. However when i clicked "more info" then "memory"... it showed the status on one of the new ramjet sticks as "ecc error"
I rebooted the computer and the error message was gone, all sticks showed a status of "ok"
a few days went by and i was constantly checking the system profiler and the status would always show the sticks as "ok" and the computer acts totally normal, i run pro tools, logic pro, photoshop and it would run flawlessly.
The fact it showed an error a few days prior was still bugging me so i decided to call the applecare protection and consult with them... they said to remove and re-install the memory, reboot holding down the "option + command + R + P" to reset memory, then to reboot again holding down the "D" to do a Apple hardware Test.
the first test showed pass, i checked the extended test and that showed a 4mem/9/40000006: B:0 C:0 R:0 error, the second and 3rd tests froze and i had to push the power button to reboot.
I contacted Applecare once again and they said that since my computer was not acting funny nor freezing during apps or showing any errors that it should be fine, as long as the status said "ok" in system profiler and all four gigs registered in "about this mac" that no harm is going to happen.
when i asked what that long error code was she said it did not come up in her computer but she thinks its because its not official apple memory.
I tried searching online in forums to solve this but i cant find anything on that specific error code.
sorry for the long post but i wanted to be as detailed as possible to get the best advice
thanks and any help would be much appreciated.
and by the way i did contact ramjet and they are willing to replace my memory but there advice was also not to worry that its only giving that error due to the memory not being "official" apple memory, but if it registers and the computer acts totally normal to just leave it be.
thanks again,
David
Message was edited by: priv510
Message was edited by: priv510

thanks for the reply Kappy,
yes they have heat sinks and ramjet states they are "apple grade"
i downloaded the istat widget (not sure how accurate that is) and it says the apple sticks on A run at 32 degrees and the ones on B run at 31 degrees
the comp is practically brand new and when i opened it for the ram install it still looked brand new (no dust) its only a few weeks old.
I am going to return the sticks for sure to be safe but where im lost is.... yes it did show ecc error once, never again, its been a week now still no ecc error. I ran tech tool deluxe and everything passes, i ran "Rember memory test" and it passes, system profiler registers all 4 gigs and shows status as ok, computer acts totally normal? but the apple hardware test fails i guess im lost to why the comp says the ram is ok nd passes most tests just not the AHT test.
Thanks for your help i hope the new sticks dont show any error
David
O and I forgot to mention i called applecare again and requested a different agent to help me and he said Ecc stands for error correcting? so if it came up once and not again it did what it was suppose to do... corrected itself (now that sounds like more b.s to me but i have no idea about computer stuff )
Message was edited by: priv510

Out of Memory Error and large video files

I created a simple page that links a few large video files (2.5 gig) total size. On Preview or FTP upload Mues crashes and gives a Out of Memory error. How should we handle very large files like this?

Upload the files to your host using an FTP client (i.e. Filezilla) and hyperlink to them from within your Muse site.
Muse is currently not designed to upload files this large. The upload functionality takes the simple approach of reading an entire linked file into RAM and then uploading it. Given Muse is currently a 32-bit application, it's limited to using 2Gb of RAM (or less) at any given time regardless of how much RAM you have physically installed. We should add a check to the "Link to File..." feature so it rejects files larger than a few hundred megs and puts up a explanation alert. (We're also hard at work on the move to being a 64-bit app, but that's not a small change.)
In general your site visitor will have a much better experience viewing such videos if you upload them to a service like YouTube or Vimeo rather than hosting them yourself. Video hosting services provide a huge amount of optimization of the delivery of video that's not present for a file hosted on standard hosting (i.e. automatic resizing of the video to the appropriate resolution for the visitor's device (rather than potentially downloading a huge amount of unneeded data), transcoding to the video format required by the visitor's browser (rather than either having to due so yourself or have some visitors unable to view your video), automatic distribution of a highly viewed video to multiple data centers for better performance in multiple geographies, and no doubt tons of other stuff I'm not thinking of or am ignorant of.

Iphone randomly shuts down and resets when using the music player

I have been listening to almost the same music list since i got the iphone 3gs at launch. When I upgraded to the latest iOS software, the phone now automatically shuts off and resets on certain playlists. I did a full restore, ddnt work. I even deleted and reloaded my cd's on there, but same issue and its getting very annoying to just have it reset every time some song plays. Anyone have an answer?? please help..

Hi there Julius Ita,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Memory errors and software detection

I have the 645EMax2 and admittedly, have a power supply issue in the process of resolution. However, I have two 512mb ddr 333mhz memory sticks from Seitec. I did a scan with DocMemory and Memtest86. Both gave errors at 485mb. I swapped them round and now have errors at 512+485 (ie 997mb) - showing it to be the stick and not the holder. Took it back to the supplier and they tested with GoldMemory (freeware I guess) and found no errors.
So, would the results depend on processor speed and or BIOS config. I agree this is not conclusive til I test with a new power supply but any ideas on the realtive merits of these software testers would be welcome. Any ideas in general would be welcome.
thanks

ps. not all ram (makes and models) will work with more that 1 stick of ram (ps. boot windows xp play game (battlefiled 1942(use lots of ram)
eg kinston 256 tiny big modulals (3x256 sticks) ok in 6547 (645) sis motherboard
apcer 512 stick one works / 2 stick fails to play game with out crashing at random.
make sure you set you timings to 2.5 safe(4) rate rame speed 333 etc

Help - Out of Memory error and intermittency problem in OIM

Hello to all.
I'm having some problems in my environment and I would drive to identify the real problem.
The environment I am using for the reconciliations is always the problem of out of memory, and often after this problem began to appear another problem of out of memory that is: java.lang.OutOfMemoryError: PermGen space
And when this problem started to appear also in the parallel User warned me of a problem he is going to happen in the following way, the User log in with your User OIM Web, but when we try to do any action, by clicking the users to search for example, the system of the message as if it had timed session, and it happens every time.
What has been there, when I looked in the log did not identify the cause of the problem, someone would tell me as a starting point, because I do not know what to do.
A doubt, we apply some patches that were described in doc.id 553266.1 (6685235, 5389650, 6454278, 6880142, 6808170),
patches that can be applied in a random or should be applied in order.
Sorry for my English, but my level is not very advanced.
Thanks,
Victor

Hi,
We also used to have memory problems earlier. The root cause was the memory grantinted to the JVM. We can configure the memory parameters from the application server.
In JBoss, we do it in following way:
File: [SERVER_HOME]/bin/run.conf (Linux box)
Line: JAVA_OPTS="-XX:PermSize=128M -XX:MaxPermSize=256M -Xms1280m -Xmx1280m"
You could try increasing the MaxPermSize to say about 2 GB. This should reduce the Out Of Memory Exception.
N.B.: If you done have the JAVA_OPTS as mentioned above, then try using the the way I am using it. It might help.

Xorg goes blanc randomly - memory error?

Hey Forum.
I've bougth a couple of ASUS EEE B202 which I using for frontends for my MythTV setup.
But after updating Xorg I'm starting to get this problem.
Suuddenly when watching TV or anything else - the screen goes blanc - not black or anything else - just gettting a ligth blue colour.
I'm getting this in my Dmesg:
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
Xorg:4774 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4774 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4842 freeing invalid memtype d0000000-e0000000
Or
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
Xorg:4734 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4734 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4799 freeing invalid memtype d0000000-e0000000
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
Xorg:4734 freeing invalid memtype d0000000-e0000000
mtrr: no MTRR for d0000000,10000000 found
Xorg:5328 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:5328 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:5333 freeing invalid memtype d0000000-e0000000
Xorg:5328 freeing invalid memtype d0000000-e0000000
Xorg:5504 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:5504 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:5511 freeing invalid memtype d0000000-e0000000
The problem is afterwards there's nothing I can do - I've tryed restarting xorg - but It cannot go out of the blanc screen, and reboot is the only option I got. As the problem occours I can SSH'e to the machine, the system is actually working, I can hear I can change channels etc open TV, I can stop the process. But the screen stays blanc.
My latest lines of Xorg showes
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
(EE) intel(0): underrun on pipe A!
I've looked in the WIKI and found that EEE had a special Kernel for running on EEE - But this will not work on my machine. Keep saying that the file /boot/vmlinuzeee does not exist - eventhough it is there.
A little extra info:
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
03:00.0 Network controller: RaLink Device 0781
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
What can I do with this error.
I've have normally runned the standard packages and kernels - so could this be a problem, also when it had run for several months without problems ?
Last edited by peque (2008-12-11 07:32:36)

Ju8st bumping the question.
I have no clue of what's happening - I starting after getting the newest xorg - but can some one telle me what the error is???
Carse the screen just goes into black at once.
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
Xorg:4711 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4711 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4776 freeing invalid memtype d0000000-e0000000
Xorg:4711 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:4777 freeing invalid memtype d0000000-e0000000

Firefox presenting random ads, websites, and reset connection messages.

A few days ago, I was presented with a bunch of random ads that would pop up on google and random articles I had been reading. I have also been having trouble with the connection supposedly resetting on multiple occasions, very often.
If someone will tell me how to upload screenshots, I can show pictures of the problems I am having. Thanks!

I think it may be a malware or spyware that's troubling you. Try add-on named Ghostery, it might help.
Anyways, you can use the "Print screen" button on your key board and paste it in Paint or similar program.
1] Bring up the screen that you need screen shot of.
2] Just press "print screen" button.
3] Open "Paint" (if you are using windows, other OS I dont know whether it works!).
4] Select "Selection tool" in paint.
5] Press "Ctrl+V" in paint to paste the screen shot that you need.
6] Save as .jpg or .png file.

Random Kernel Errors and need to repair disk

After trying to partition for Bootcamp, the computer locked into a Kernel error. I went to validate the disk and discovered that I need to repair the disk. I have tried booting from my OSX installation disk to access the repair disk functionality. I receive a kernel error each and every time I try to boot from disk. Details as follows - please advise.
Interval Since Last Panic Report: -1127922 sec
Panics Since Last Report: 1
Anonymous UUID: F32AB6E4-83EA-45BF-9186-E23B077676E9
Sun Mar 13 21:26:16 2011
panic(cpu 1 caller 0x2a6ac2): Kernel trap at 0x581571fc, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x19703000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x06f75004
CR2: 0x00000018, EBP: 0x5786bc78, ESI: 0x07f29c00, EDI: 0x07f29c00
EFL: 0x00010246, EIP: 0x581571fc, CS: 0x00000008, DS: 0x00290010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5786ba88 : 0x21acfa (0x5ce650 0x5786babc 0x223156 0x0)
0x5786bad8 : 0x2a6ac2 (0x590a50 0x581571fc 0xe 0x590c1a)
0x5786bbb8 : 0x29c968 (0x5786bbd0 0x7f16700 0x5786bc78 0x581571fc)
0x5786bbc8 : 0x581571fc (0xe 0x48 0x10 0x57860010)
0x5786bc78 : 0x580fbfb8 (0x0 0x7f16700 0x80deac0 0x810b140)
0x5786bc98 : 0x57d10189 (0x7f29c00 0x57d15304 0x80deac0 0x0)
0x5786bd08 : 0x57d0cb98 (0x7f29c00 0x5786bdcc 0x7501bb8 0x4a7632a3)
0x5786bd38 : 0x5330cf (0x7f29c00 0x7501bb8 0x7501bb8 0x0)
0x5786bd88 : 0x563a86 (0x7f29c00 0x7501bb8 0x7501bb8 0x0)
0x5786bde8 : 0x284883 (0x7f29c00 0x7501bb8 0x0 0x0)
0x5786be58 : 0x21d09c (0x6f00168 0x6f00284 0x6f0016c 0x6f001a4)
0x5786be98 : 0x210234 (0x6f00100 0x5786bedc 0x739bd74 0x5786bed0)
0x5786bef8 : 0x216497 (0x6f00100 0x0 0x0 0x0)
0x5786bf78 : 0x2922ba (0x74407e8 0x0 0x0 0x0)
0x5786bfc8 : 0x29d44d (0x74407e4 0x0 0x10 0x74407e4)
Kernel Extensions in backtrace (with dependencies):
com.apple.NVDAResman(6.0.0)@0x580f8000->0x5838bfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x50e3b000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x57cbd000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x57cff000
com.apple.iokit.IOGraphicsFamily(2.0)@0x57cff000->0x57d1cfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x50e3b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10A432
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 147336336486
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.InternalModemSupport 2.6.0
com.apple.driver.AppleTyMCEDriver 1.0.1d8
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.GeForce 6.0.0
com.apple.driver.DiskImages.SparseDiskImage 281
com.apple.driver.DiskImages.ReadWriteDiskImage 281
com.apple.driver.DiskImages.UDIFDiskImage 281
com.apple.driver.DiskImages.RAMBackingStore 281
com.apple.driver.DiskImages.HTTPBackingStore 281
com.apple.driver.DiskImages.FileBackingStore 281
com.apple.driver.AppleUSBTCButtons 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.5.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.nvenet 1.0.58
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleProfileReadCounterAction 17 - last loaded 147290710663
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.driver.AppleHDAPlatformDriver 1.7.4a1
com.apple.iokit.IOBluetoothSerialManager 2.2f18
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.4a1
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.AppleProfileFamily 40
com.apple.NVDAResman 6.0.0
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.DiskImages.KernelBacked 281
com.apple.driver.AppleUSBMultitouch 200.20
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2f18
com.apple.driver.AppleUSBBluetoothHCIController 2.2f18
com.apple.iokit.IOBluetoothFamily 2.2f18
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.0
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0

The installation DVD is from another Mac, but is also Mac OSX 10.6
Is it required that I use the exact disk that shipped with my computer? (Go figure, it's in Minneapolis, I'm in Atlanta...).
The DVD however is in no way scratched or dirty. I will run the hardware test and report back.
Thank you for the leads.

How can I access docs on a frozen Pages app? The Pages app froze up after attempted repair at the Genius bar last night. The IPAD was having significant memory errors, and staff backed it up to the ICloud, then wiped the IPAD clean and restored the apps.

How can I access documents on a frozen Pages app? The Pages app on my IPAD does not function after the IPAD was backed up on the ICloud, and then restored. I synced the IPAD, but this did not solve the problem. Other apps are working, just not Pages. Please help! These docs are badly needed for work. Thanks so much!

Have you tried closing the Pages app completely and seeing if it works ok when you re-open it ? From the home screen (i.e. not with Pages 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Pages app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4623 I did the update to iOS 6.0.1 on my iPod Touch. Whenever it was finished downloading on my computer, I downloaded it onto my iPod. Then, my iPod said it had an error and reset itself to where the screen says, "connect to iTunes."

It won't pick up that my iPod is connected to iTunes whenever I plug it in.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer.

E71 keeps giving out of memory error; I can't find...

My Nokia E71 (it's black so it may be an E71x, I guess) keeps giving me out of memory errors. I use my phone for nothing but voice calls, text messages, and emails. I have cleared all call logs, deleted all emails except 5 (they have no attachments) and cleared deleted emails, and deleted all text messages. I went into file manager and made sure there are no images, videos, etc. on the phone. I set up options to use memory card for emails. I've turned the phone off, waited 15 or 20 seconds, and turned it back on.
I did all this a couple weeks ago. Ever since then. every couple days I get these out of memory errors, and the phone memory shows me 119 MB used and something like 300K free. I'm at the point where every few emails that come in, I have to delete all emails, erase all text messages, etc. or the phone is just too low on memory to operate.
What else can I try? I don't have any additional applications installed. I've even tried to delete built-in apps such as RealPlayer but it didn't seem like that was possible.
This is getting really annoying. Please help!

@EricHarmon
Although all user data would be deleted, have you tried resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user)?
Happy to have helped forum with a Support Ratio = 42.5

Insufficient memory error when loading a large Excel 2007 file

My Tx shows approximately 110 M free memory. I have the Documents To Go version 11 applications, as well as the 1.9 M spreadsheet on a 2Gb SD card. when I try to load the file, I get an insufficient memory error, and the device does a soft reset when I touch OK. I haven't tried moving the file to the device memory. Would that help? Is there anything else I can do to get the file to load?
Any suggestions would be appreciated
Post relates to: Palm TX

It means not enough dynamic memory, or the "RAM" portion of the memory. You have 110 MB of free program memory, which is where everything is stored, and is largely unrelated.
You could try buying UDMH, (palmpowerups.com) an app that expands the dynamic memory area.
A soft reset before opening the file may help too.
webosnation.com is another option for help.

Status:\t10.0000 SUPPLY MEMORY ERROR + cannot install printer

Hi I have an HP Laserjet P1102w printer. I changed my router, and changed my laptop and now am not able to install the printer on the new laptop and router.
I have tried installing from the HP smart install program via USB cable. When i do this I get an error message saying that the installation failed and advising me to turn off the printer, turn it on again and try again.
I have tried resetting the printer to the default settings, then printing a test page and using the supplied IP address to access the printer. An error message says:
Status: 10.0000 SUPPLY MEMORY ERROR
I have tried ignoring this and going to the HP Smart Install Tab and installing the printer that way. When i did this I get a similar error message to before saying that the installation failed and advising me to turn off the printer, turn it on again and try again.
Could someone please advise me on what to do? Should I focus on trying to get the printer installed, then try to fix the supply memory error or fix the supply memory error and then try to install the printer? I'm a bit loathed to buy a new toner cartridge, if after doing this the printer may still fail to install.
Thanks in advance,
Paul
This question was solved.
View Solution.

Very good information. Since this printer is having such a hard time reconnecting try resetting the printer first. I have provided a link on how to restore this printer to factory defaults. I had a similar problem with this printer until I installed a very recent firmware update. This is how I finally was able to get it to install and connect:
Clicked on the Software and Drivers tab at www.hp.com/support and typed in my printer name (Laserjet P1102w) and pressed the enter key. Next I selected my operating system (you will need to know if your computer's system type is 32 bit or 64 bit or I would provide a link).
Under the Driver and Product installation I installed the HP Laserjet Full Feature Software and Drivers and proceeded to install it using the USB to wireless configuration.
After the test page printed, the printer disconnected from the network so with the USB cord still attached, I went to the same download page and installed the most recent firmware update: Version 20130213 which went very well I might add.
Next, I went to the Start button and selected All Programs>>HP>>HP Laserjet Professional P1100 series>>Wireless Configuration and finished getting my printer connected back to my network.
I strongly suggest the firmware update. I hope this information helps you out. Try the steps above and if it doesn't work let me know. I will look at the error message once you are able to get it installed. It may be that when you restore the printer to factory defaults you will also want to reboot the computer in case you are running low on available memory, hence the error message.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Random memory errors and resetting

Similar Messages

Maybe you are looking for