Random midi notes playing and midi playback transposing on it's own.
hi,
i wonder if anybody can help with this..... i am using 10.5.5 and logic 8. when i play something using midi, after a few playbacks normal it suddenly pushes all the notes so that they play back different, its like it transposes all the notes up a tone or down a tone when i hit record it often records long notes very high up in the scale that i never played. it's driving me crazy.
hope you can help
This will better explain the scrubber bar, sorry, sometimes I think too quick without realizing it. In the 3.0 version, from the playback display for a podcast, tapping the screen brings up a set of expert controls: a button to email a link to the podcast's page on iTunes; a 30-second "What's that, now?" instant rewind button; and a playback speed control to give you 1/2 speed, normal or 2x "FedEx mode" playback. The scrubber bar itself has been given a charge, even though it doesn't look any different until you tap it; it displays the relative playback position within the episode being played. Dragging horizontally gives you high-speed scrubbing (previously known as "just plain old scrubbing"), but if you keep your finger on the screen and drag down, your scrub rate lowers step by step through half-speed, quarter-speed and 'fine scrubbing.' This detail control makes it a lot easier to cue up a particular spot in a long show or book chapter.
Check & see where yours"might be set".
If its not this, then try & restore from backup & see if that fixes the problem.
Similar Messages
-
Captivate 7 saved project randomly does not play slide audio in preview project.
I created a training project with over 100 slides. Each slide has an audio track that I recorded, When I preview each slide it sounds fine. When you preview the entire project, some slides randomly do not play the audio track. Try it again and other slides randomly don't play. How can I fix this and prevent it from happening?
I concur, but do not have the device with me today, and was wondering if this is a common discrepancy. Has anyone tested Captivate output with slide audio into DPS? Does it work?
-
Voice memos not playing and not synced
some of my voice memos are not playing and are not being synced to itunes, what can I do?
- Try reetting theiPod. Nothing will be lost
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If you synced since you recorded the memos you can restore from backup. -
When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
-
My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it
If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.
-
Had to have my hard drive rebuilt in my PC (not a Mac). When I reinstalled my music library from itunes, some of the songs did not properly download. They appear in light colored ink, but will not play and will not synch with my iPod. How can I get all of my songs back?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
downloaded songs from itunes and the internet went down and they will not play and also caused other songs already downloaded not to play what can i do
You can try a couple of different things. First - restart the iPod and see if the songs will play.
Restart the iPod by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't help - delete the songs and then download them again. You can download purchased music again at no charge as long as you use the same Apple ID that you bought them with originally and as long as you live in one of these countries.
Previously purchased music is only available through iTunes in the Cloud in Argentina, Australia, Belgium, Bolivia, Brazil, Canada, Chile, Colombia, Costa Rica, Cyprus, Czech Republic, Dominican Republic, Ecuador, El Salvador, France, Germany, Guatemala, Honduras, Ireland, Luxembourg, Malta, Mexico, New Zealand, Nicaragua, Panama, Paraguay, Peru, Slovakia, Spain, Switzerland, the United Kingdom, United States, and Venezuela.
If you are running iOS 5 on the iPod - You can delete songs by swiping across the song in list view to bring up a red delete button. Tap the button to delete the songs. Download the songs again in the purchased tab in iTunes.
Downloading Past Purchases -
My rental movie is not playing, and I have 24 hours to watch it, and I did want to watch it tonight, can I get reimbursed?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
my iPhon 5 s iOS 8.1.2 since 2days when i am receiving videos through watsapp it did not play and a letter appear said videos are not included in the iCloud backup how to make it included ?
You can recover Your music but not with original names.
1. Go to Your iPod hard disk
2. You must to see hidden files (if you don't see them go to in system explorer to Tools > Folder Options > View > and mark Show Hidden Files)
3. Go to folder named iPod_Control
4. Copy folder Music - this is Your music but not with originally names
I'm must to say sorry - my English is not very good - I'm still learning
I hope it helps -
I have the volume control symbol in the enter of my iPad all of the time. My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level. Thanks
Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.
-
computer crashed had to factory recover OS and can not play the 2 movies i purchased prior to computer crashing can not play and can not locate! How do I recover them?
You definitely need to resurrect the old password associated with the Apple ID you used to purchase the music.
Go here: https://iforgot.apple.com
An email will be sent to the email address associated with that account with instructions regarding resetting that Apple ID's password.
If you no longer have access to that email, the resolution to this problem becomes considerably more difficult. In that event you would need to contact iTunes Support and explain your dilemma. -
I have installed mountain lion on my early 2009 macbook (not unibody) and it is terrible, it's like owning a windows pc again (almost) What can I do? I paid for mountain lion, is there any way of giving it back and getting a refund? obvisoulsy after unintalling it. I couldn't see any reason why it would be bad for my particular macbook, and it downloaded without a problem.
In what way is it terrible? Mountain Lion is pretty stable. If you are having problems, most likely they are unique to your particular system and can be fixed. If you don't like some of the new features, that does not constitute reason for a refund.
If that does not suit you, you will have to discuss a refund with Apple, as they are the only ones who can say. Note that the App Store terms do say that all sales are final, so you are not guaranteed a refund, especially since whatever problems you had are not due to defective software. -
I bought itunes match over a year ago and didn't really like it so I removed it from my phone/itunes library altogether but I still have like 12 songs that are stuck on the phone and will not play because my itunes match has now expired, they can't be removed either apparently. I've tried all the regular ways so please somebody come up with something original way to get rid of them. They have no cover art and are really starting to bother me.
Make sure you don't have updates yet for oldify etc if not , Do reset. On whole phone. Updates will come for oldify.
-
About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased.
I had to restore through my iTunes but then I could not load my music back on.
I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
Of course, my 1 Year Warranty was up about a week before the first incident.....
I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
Does anyone know what is going on with this thing??? I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this!
Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
Thanks.When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day!
Maybe you are looking for
-
[JS/CS4/CS5] Catching a selection event in a ScriptUI interface.
I've got this ScriptUI interface (javascript based), and now I wonder if it would be possible to change one of its button captions depending on whether anything is selected or not, in the active document (would also have to be updated if the user sel
-
How to get the user active stauts in jspdynpro
How to get the user active status in jspdynpro. I want check weather a user is active or not (Collaboration Launch Pad functionality) in jspdynpage. Thank's in advance, Mr.Chowdary
-
Any Function in T-SQL thats similar to GREATEST() IN Orcl.
Is there any Function in T-SQL thats similar to GREATEST() IN Orcl? Iam trying to find the greatest of two DATETIME datatype Fields in my 'select's. If there is no in built function, Whats the best approach?
-
Regarding mutiple delivery adress in PO
Hi everybody, 1010 and 1020 plants are there in company code 1000. I have a scienario like, i am doing a PO in 1010 plant having purchasing org 1010. i want, the goods to be deliver by vendor to different plant 1020 not the adress of 1010. but in ite
-
SCE Collection Manager prunetable.sh
I am trying to use the command prunetable.sh but it doesn't work. The command is the following: -bash-3.2$ ./prunetable.sh 85 INI_VALUES Are you sure you want to prune table INI_VALUES ? (yes/no): yes Periodic delete not created. Use user guide to cr