Random missing cd question

I have recently discovered a ton of music has just gone from my PC, most of it is some of my favorite music, so I wouldn't have deleted it from iTunes nor would I have purposefully deleted it from my PC. I may have deleted it from my PC when I assumed it was on iMatch, but I wouldn't have from iTunes. Can iTunes physically remove tracks without asking you? This is upwards of 600 cds or so, that are just gone. I don't see how I could just wipe them all out by accident. A good portion of my missing music I will admit have been on iTunes since the early days of the program, but then again, there are other things that are just as old that are still there. So what is going on here? I don't want to keep re adding music every time theres a new iTunes.

Hey there Manok,
I imagine that would be pretty frustrating, having hundreds of CDs suddenly go missing from iTunes. The article linked below has a lot of great information and troubleshooting tips that will solve most missing media issues.
iTunes: Finding lost media and downloads - Apple Support
I hope this helps,
-Jason

Similar Messages

MPEG2 randomly missing in AME CC 2014

Any idea why MPEG2 support is randomly missing from Adobe Media Encoder 2014? To get it back I have to uninstall and reinstall the product so the issue is serviceable, but with proper deadlines that 5-20 minutes can be a stressful wait. I work on a Win7 64bit system.
Thanks!

Thanks for the tip, sorry for not getting back to you sooner.
This seems to have helped, but not because I personally signed out. I also have an issue where CC2014 signs me out randomly and I have to sign back in. So these two wrongs have made a right. I won't question it anymore since I am able to get my work done.

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

JSlider randomly missing tick labels

Hello everyone,
I am having a problem with JSliders. I have an application that has several JSliders throughout. They are vertical, min=100 and max=1000, with major ticks every 100, and minor ticks every 25, and the ticks and labels are painted.
I have noticed that out of say 10 such sliders in my application, perhaps one or two sliders are randomly missing some ticks. For example, the labels will read 100, 200, 300, 400, 500, 600, 700, 900, 1000 (with the 800 just missing). The space for the text is there, but no text.
As I mentioned, this doesn't always occur. It occurs perhaps on one or two sliders out of 10 every time I start the application. So this would seem to me to be related to a threading issue.
Here is the constructor that creates the panel that has the JSlider in it:
 try{
 SwingUtilities.invokeAndWait( new Runnable(){ public void run(){
 // INIT GUI & CUSTOM INIT
 initComponents();
 depthJSlider.putClientProperty("JSlider.isFilled", Boolean.TRUE);
 catch(Exception e){ Util.handleExceptionNoRestart("Error building Log Table", e); }
Here is initComponents() which actually does the work:
 private void initComponents() {
 depthJSlider = new javax.swing.JSlider();
 depthJSlider.setMajorTickSpacing(100);
 depthJSlider.setMaximum(1000);
 depthJSlider.setMinimum(100);
 depthJSlider.setMinorTickSpacing(25);
 depthJSlider.setOrientation(javax.swing.JSlider.VERTICAL);
 depthJSlider.setPaintLabels(true);
 depthJSlider.setPaintTicks(true);
 depthJSlider.setSnapToTicks(true);
 depthJSlider.setToolTipText("<html>\nEvent Log Depth Slider \nThis slider allows you to specify the maximum number of visible\
events \nwhen the \"Refresh Log\" or \"Start Auto-refresh\" buttons are pressed.</html>");
 depthJSlider.setMaximumSize(null);
 depthJSlider.setMinimumSize(null);
 depthJSlider.setPreferredSize(null);
 gridBagConstraints = new java.awt.GridBagConstraints();
 gridBagConstraints.gridx = 0;
 gridBagConstraints.gridy = 0;
 gridBagConstraints.fill = java.awt.GridBagConstraints.VERTICAL;
 gridBagConstraints.weighty = 1.0;
 gridBagConstraints.insets = new java.awt.Insets(5, 5, 5, 10);
 tableJPanel.add(depthJSlider, gridBagConstraints);
 }Does anyone have any ideas at all why some of the labels might be missing?
(Please drop a line to [email protected] if you have any thoughts!)
Sincerely,
Ian

No problems in j2se 1.5.0
import java.awt.*;
import javax.swing.*;
public class SliderTest {
 private JSlider getSlider() {
 JSlider slider = new javax.swing.JSlider();
 slider.setMajorTickSpacing(100);
 slider.setMaximum(1000);
 slider.setMinimum(100);
 slider.setMinorTickSpacing(25);
 slider.setOrientation(javax.swing.JSlider.VERTICAL);
 slider.setPaintLabels(true);
 slider.setPaintTicks(true);
 slider.setSnapToTicks(true);
 slider.setToolTipText("<html>Event Log Depth Slider" +
 " This slider allows you to specify the maximum " +
 "number of visible events when the \"Refresh Log\" " +
 "or \"Start Auto-refresh\" buttons are pressed.</html>");
 slider.setMaximumSize(null);
 slider.setMinimumSize(null);
 slider.setPreferredSize(null);
 return slider;
 private JPanel getPanel() {
 JPanel panel = new JPanel(new GridBagLayout());
 GridBagConstraints gridBagConstraints = new java.awt.GridBagConstraints();
 gridBagConstraints.fill = java.awt.GridBagConstraints.VERTICAL;
 gridBagConstraints.weighty = 1.0;
 gridBagConstraints.weightx = 1.0;
 gridBagConstraints.insets = new java.awt.Insets(5, 5, 5, 10);
 for(int j = 0; j < 10; j++)
 panel.add(getSlider(), gridBagConstraints);
 return panel;
 public static void main(String[] args) {
 SliderTest test = new SliderTest();
 JFrame f = new JFrame();
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 f.getContentPane().add(test.getPanel());
 f.setSize(800,400);
 f.setLocationRelativeTo(null);
 f.setVisible(true);
}

Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

Also there seems to be no obvious way to report Office bugs. This is leaving little room for improvement. Not sure if there has been any planning on this front???
For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead). But how do I communicate this to the Office team without knowing at least one of the team personally (which I
don't)???

Hi,
Do you have this issue when pasting in other programs?
If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
Regards,
Melon Chen
TechNet Community Support

Random Missing/Modified Links

For the past couple of days I have been experiencing random missing/modified links showing up in preflight.
I am using CS4 on Windows 7... all of the graphics are stored on a shared network, but no one was using them when the issues started.
When I see the missing/modified links error, I relink them and go back to editing the document... within 15-20 min they are back. Until this afternoon, I go to relink them... and they fix themselves *scratches head*
Any ideas what could cause this type of behavior?
Thanks for any help you can offer.

Possibly a time synch problem.

Randomly missing calls

Hey all, last 4 weeks, randomly missing calls.Home, at work, everywhere.
Sometimes goes to voicemail,sometimes not,Do not disturb is not on.
SIM card replaced.Redid network settings.Sprint says it is tower problems
and I say B.S. Because my daughter has a 5 S and my wife 4 S
and they have no problems. Is this Apple or a Sprint problem.

There are instructions here
http://support.vzw.com/system_update/samsung_fascinate.html
If this does not work you will have to activate a different smartphone (to keep your data plan) and then reactivate your fascinate
and it will update for you
I know this is a lot of hassle to update your phone
This Phone has never been good about update's A lot of people have this problem

Randomly missing group text messages

I am in a group text message and will randomly miss a message or receive them in the wrong order. My husband and I are the only ones in the group that this happens to. The others are on ATT. Is this the reason? The missing texts are from both Iphone and other users.

Hello MOlive13,
Group messaging has really become a fun way to interact with a group of friends at once. In order to participate in group messaging, the devices participating would need to be compatible and have group messaging enabled. This feature may not be available with every device, which may cause problems with receiving messages. One step you can take to ensure your device is set up for group messaging would be going to Settings>Messages and from this screen enable MMS Messaging and Group Messaging.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Adobe Captivate 8 system variable "cpQuizInfoAnswerChoice" is empty for random multiple-choice questions.

Does anyone run into this problem when capturing the user answer for a random question slide? Adobe Captivate 8 system variable "cpQuizInfoAnswerChoice" is empty for random multiple-choice questions.

Hi Shriyansh.
The reason I am interested in capturing the user answers in Submit All situation is that I know after I published the test using SCORM 2004, all the user responses were captured in "cmi.suspend_data" because my test can resume the test to the last exit question in the middle. However, when I looked at the suspend data value, I have a hard time to understand the pattern and pick out the meaningful user question responses data. I really need help from you to understand how the suspend data value was constructed and how to parse this data. Another area I thought it's easy to get the user question responses data is the interaction records, but I always got only one question (the last randomly sampled question) interaction record. See the following generated XML SCORM 2004 4th edition data. Could you help me figure out how to interpret the following suspend data to get the users responses to each test question? And why I only got one question interaction record? Thanks again for your help, Zhuoran.
<ArrayOfKeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.success_status</Key>
<Value>failed</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.completion_status</Key>
<Value>completed</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.exit</Key>
<Value>suspend</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.mode</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.suspend_data</Key>
<Value>M1A%24nP1A%24nP1FPool1B1FPool2A1FPool3A1FPool4B1FPool5B1FPool6B1FPool7A1FPool8B1FP ool9A1GPool10A1A%24nP000BB0100C11KCA%7E%24nU*9aAlO%7E%24nU*3eOlO1000B00AEAH0%3B1%3B2%3B3BA B0B0BBB0B0BCB0B1BDB1B0DB%7E%24nU*-EBlO%7E%24nU*YoOlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B1BC B0B0BDB1B0EC%7E%24nU*flBlO%7E%24nU*IyOlO1010B00KEAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B0BDB1B1FD %7E%24nU*nWMlO%7E%24nU*kRPlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B1BCB0B0BDB1B0GE%7E%24nU*kRP lO%7E%24nU*arPlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B1BDB1B0HF%7E%24nU*arPlO%7E%24nU*c HQlO1000B00AEAH0%3B1%3B2%3B3BAB0B1BBB0B0BCB0B0BDB1B0IG%7E%24nU*cHQlO%7E%24nU*kfQlO1010B00K EAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B0BDB1B1JH%7E%24nU*kfQlO%7E%24nU*74QlO1010B00KEAH0%3B1%3B2 %3B3BAB0B0BBB0B0BCB0B0BDB1B1KI%7E%24nU*74QlO%7E%24nU*IYRlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BB B0B1BCB0B0BDB1B0LJ%7E%24nU*IYRlO%7E%24nU*aHSlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B1BD B1B00PNvar_ToggleTOCBAPvar_ToggleAudioBAEv_S1BAEv_S2BAEv_S3BAEv_S4BASv_completionStatusBAP v_successStatusBAKv_locationBAFv_scoADls3NreturnMessageBAHv_scoreBAOv_scorePercentBAPv_cur rentChoiceBAPv_stringChoicesBA</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.entry</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.location</Key>
<Value>Posttest%20Results</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.launch_data</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.learner_name</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions._count</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.id</Key>
<Value>LSQ19C</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.type</Key>
<Value>choice</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.learner_response</Key>
<Value>The_vehicle_is_under_warranty_for_the_life_of_the_lease</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.result</Key>
<Value>incorrect</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.correct_responses.0.pattern</Key>
<Value>Genuine_Subaru_Accessories_can_be_residualized_as_a_part_of_the_lease</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.description</Key>
<Value>What is one feature of a Subaru Motors Finance lease?</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.weighting</Key>
<Value>10</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.latency</Key>
<Value>PT3S</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.objectives.0.id</Key>
<Value>Quiz_2014924125021</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.timestamp</Key>
<Value>2014-11-20T13:02:01.0-06</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.raw</Key>
<Value>30</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.max</Key>
<Value>100</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.min</Key>
<Value>0</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.scaled</Key>
<Value>0.3</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.session_time</Key>
<Value>PT31.99S</Value>
</KeyValueOfstringstring>
</ArrayOfKeyValueOfstringstring>

Randomly missing jobs from the collections

In decentralized setup, 11.5.10 source linked to ASCP 12.1.3.9.1, WIP
jobs are randomly not collected into planning tables. It seems the
disconnect is between the view MRP_AP_WIP_JOB_SUPPLIES_V and staging table
msc_st_supplies. Doesn't seem to be a Planning
Manger issue either as MPS_NET_QUANTITY = 1 for the problem records. One observation is that the last update date of the 'missing' WIP jobs
are around the same time the Refresh Collection Snapshot is running.

Is this issue resolved? If not can you throw some more information along the below questions.
Is the planning manager up and running? What about the firm planned flag? Is there any open quantity on job to be completed? Does this job show up on the view supply/demand screen on the txn instance?
Thanks,
Karthik

Hp LaserJet P3015 randomly miss prints random letters.

Hi
I wonk as a It technician in a College environment. We have a computer lab with 40 Dell OptiPlex 390's connected via a local area network to a Hp Laser Jet P3015. The students have to use a water mark during exams as a way to identify on witch computers they wrote the exam. Now on random occasions Radom alphabetical characters are being miss printed for example all the "I's" or "T's" in the document won't simply print. To get the machine to print correctly I have to reboot the pc and printer and this can cause a lot of trouble during the exams. I have tried using different drivers (UPD PCL 6 and UPD PLC 5) but the miss prints still occur. Microsoft office 2010 and 2007 was running parallel on the computers, but I uninstalled 2010 due to the fact that our text books for 2010 will only be available next year. Please can anybody assist me.
System Information
Time of this report: 9/5/2013, 13:08:06
Machine name: STR-B122-01
Operating System: Windows 7 Professional 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: OptiPlex 390
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (4 CPUs), ~3.1GHz
Memory: 4096MB RAM
Available OS Memory: 3240MB RAM
Page File: 715MB used, 5764MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

The majority of the tools in the PCL Paraphernalia application generate print jobs; the Target menu allows the user to select the target (network-connected) printer, or to direct the output instead to a file.
However, four of the tools do not interact directly with a printer, and the Target menu is irrelevant for these tools; the PRN File Analyse tool is one of these, and with this tool, the file to be analysed is selected via the Open Print File ... button in the dialogue of that tool.
The Downloads page of the website provides a link to a Windows .chm Help file, which describes the application and each tool.
The TrueType Courier New display font is usually mapped to an equivalent printer-resident scalable Courier font on most LaserJet (and clone) printers - I don't have access to a LaserJet P3015, so I don't know for sure which printer-resident fonts are available - you could find out by printing out a PCL Typeface (Font) List from the printer.
Your captured mytest.prn file:
Shows that a font selection sequence for the printer-resident Courier font is present, but also downloads 11 different PCL soft fonts - 10 of these are in resolution-specified bitmap font format, the other one is in PCL Encapsulated TrueType (PCLETTO) format - without a lot of additional checking, I don't know which font is used for which bits of text in your print document.
Prints (2 pages), without any apparent problem, on my local LaserJet 1320n printer - there do not appear to be any missing characters, so either you have captured a sample which does not exhibit the fault, or the problem is within your own printer, not the driver-generated print stream.
I can't post the analysis output here, as this (Consumer) forum does not provide file upload facilities; the equivalent Business forum (see http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412 ), which is probably more relevant to your printer model and configuration, does provide this feature.

What do you do with a group of random pics + general questions

I am a potential new user of iPhoto 6 and Mac. I have been reading through the hundreds of threads for iPhoto. I have a collection of over 12000 images (some on a pc, some on cd, and others on floppy). I have yet to get the entire catalog organized to date even with several attempts. I hope the Mac would solve all my troubles so I am holding off any further cataloging.
On to my question - I usually take random photos of my kids or outdoors or otherwise, along with a full larger set of photos from a day outing. The first few wouldnt be album criteria in and of themselves, but the full set would (i.e. Day at the Museum). I wonder how this type of shooting is handled as far as organizing with the roll/album features in iPhoto6.
Also, isn't anyone really concerned about the lack of IPTC support in iPhoto? I currently use Elements 4.0 and the Organizer is fantastic (although hated by others). I personally find it very useful to have all my photos saved in folders by import date. I cant grasp the idea of how to get roll# from this to import into iPhoto.
I would hope to find a Mac program that supports the use of photo captions and keywords. It doesnt appear that iPhoto is it. Is it? Does it also support PSD files? I am trying to understand the process on how the file copies/moves/edits files upon import too. It is hard to imagine the process when I dont have it yet (but may within a couple months)!
I am sure I have many more questions to come, but I'll start with this if someone would be so kind to give me information. I have hunted for specifics and find only very simple how to steps.

photobug:
Welcome to the Apple Discussions.
personally find it very useful to have all my photos saved in folders by import date.
iPhoto will create a roll for each folder imported and name that roll the same as the folder. However, the date on the roll may not match the capture date of your photos but instead reflect the latest modification date in the bunch. You can change the roll date so that it lists correctly chronologically.
iPhoto also supports Photoshop files, psd. You can also edit your photo from within iPhoto with PS. Just go into iPhoto's preferences General pane and select Photoshop in the Edit photo in: menu. Now when you double click on a photo PS will open it and you can edit. There is one caveat, however. If you edit a jpg file and create a layered image file or one that required the psd extension you must save it to the desktop and then import as a new file. Once imported as a psd file, you can edit it again without issue, layers or not.
If you're interested in maintaining your source files outside of iPhoto you can use iPhoto's alias method (see the Advanced section of iPhoto's preferences) and just have iPhoto use alias files instead of copying the full file into it's library folder system. This way you can have your source files on an external drive and only the library folder on your boot drive. I have 27G of photos on my second drive and a 1.7G library on my boot drive. If you have a laptop and want to take it traveling you'll be able to view thumbnails, create and delete albums, add comments and, with some aggravation, add keywords. You cannot do anything that will require the full image file, edit, slideshows, books, etc. Once the external HD is remounted the library will be fully functional again. I've create a Tutorial to assist users in converting over to the alias system. Good luck.

Randomly Missing Text in PDF Created from FrameMaker

This problem relates to a structured FM document, but I suspect it might be a general issue and have posted it here in the general forum for that reason.
I am generating PDFs that are missing text somewhat randomly throughout. I tried searching the forum for solutions, but none of the suggested fixes worked and none of the posts specifically addressed the issue I am experiencing.
I am working in structured FM. The templates we use were originally created for FM8. We use both FM8 and FM10 in our work group. We are able to duplicate the same problem in both versions and on multiple computers.
I thought I had narrowed the problem down to certain paragraph formatting, since it only ocurs in three or four paragraph formats (a bullet list, table text, etc.) Garden variety formatting. But in most places in the document, these formats appear perfectly. The strangest occurence is a single intance where the page number is missing from the footer.
I thought it might be a font issue, as I've had similar issues in the past. I had a missing font warning in the console, but I am pretty sure that this has nothing to do with it, since they are fonts we are not using and all the other text from the same formats appears.
I tried turning off "Remember Missing Font Names" in preferences. No help.
I checked that the fonts are in the local directory and appear as embedded subsets in the PDF.
I also tried checking and unchecking the "Rely on system fonts only; do not use document fonts" option in the PDF output settings. Also no help.
The randomness of the missing fonts bewilders me and I've exhausted my own troubleshooting abilities. I would be happy to share a source file if anyone thinks they could help me that way.
Thanks in advance,
Douglas

There is a known bug in Windows XP that causes random dropped text in
PDF. The hotfix is here, though the link does not seem to be working at
the moment:
http://support.microsoft.com/?id=952909
However, the above link directs you to a download link that is here:
http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us <http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us

HP Envy 14 (2020NR) - randomly missed keystrokes after wake from sleep (on battery power only)

While running on battery power, sometimes when I wake from sleep, keystrokes will randomly be missed. It doesn't always happen, and I need to do more experimentation to figure out just how often it occurs. To fix it, I just reboot the computer (while still on battery power), and the problem seems to be gone. It can also be fixed by simply plugging in to A/C power. I am using Windows 7 Home Premium 64-bit.
I have seen similar threads where people say that repeated keystrokes are missed, or rapid keystrokes are missed -- but so far those threads have remained unanswered, and my problem seems a little different in that no one else has mentioned a correlation with running on battery power. The problem never occurs otherwise, for me.

If you are still under warranty you need to return the laptop for service. If not I am afraid it is a motherboard issue requiring replacement. You have done all the diagnostics a professional would do. The fact that the battery works in another computer tells us it is not the battery.

Random-non-apple-question ADOBE LIGHT ROOM?

...a random question for anyone that uses adobe light room... when i go to import cannon raw files it imports as colour and then after they 'render preview' they turn black and white...
i's so fustrating!
no presets are on and i reset the settings...
no other format of picture does this.
it dosent matter how i import the files, it still turns black and white.
if anyone could help that would be awsome

lucas2 I would suggest you go to the Mac forum at Adobe.
lechtmmgg

Random missing cd question

Similar Messages

Maybe you are looking for