Random missing text in brochure

I am new to this discussion board but am so happy to have found it.
I am working in XI. I have two brochures that are missing some text on a few page and is fine on all others. The brochures were created in InDesign. I have opened one of the updated bochures from last year and it is fine. It is also fine when I view from Acrobat. Any suggestions on what the issue is or how to fix?
Thank you for any help you can offer.

No missing text in Safe Mode.
First time unchecking hardware acceleration fixed it. I decided to check if it was really that by checking it again and seeing if it disappeared again. It did. Then when I tried to uncheck it again, the text was still missing and I couldn't fix it again. But after some back and forth of switching from safe mode to normal and vice versa with the hardware acceleration unchecked, the text reappeared again. So I decided to leave it since its fixed for now. Thank you so much for your help.

Similar Messages

Randomly Missing Text in PDF Created from FrameMaker

This problem relates to a structured FM document, but I suspect it might be a general issue and have posted it here in the general forum for that reason.
I am generating PDFs that are missing text somewhat randomly throughout. I tried searching the forum for solutions, but none of the suggested fixes worked and none of the posts specifically addressed the issue I am experiencing.
I am working in structured FM. The templates we use were originally created for FM8. We use both FM8 and FM10 in our work group. We are able to duplicate the same problem in both versions and on multiple computers.
I thought I had narrowed the problem down to certain paragraph formatting, since it only ocurs in three or four paragraph formats (a bullet list, table text, etc.) Garden variety formatting. But in most places in the document, these formats appear perfectly. The strangest occurence is a single intance where the page number is missing from the footer.
I thought it might be a font issue, as I've had similar issues in the past. I had a missing font warning in the console, but I am pretty sure that this has nothing to do with it, since they are fonts we are not using and all the other text from the same formats appears.
I tried turning off "Remember Missing Font Names" in preferences. No help.
I checked that the fonts are in the local directory and appear as embedded subsets in the PDF.
I also tried checking and unchecking the "Rely on system fonts only; do not use document fonts" option in the PDF output settings. Also no help.
The randomness of the missing fonts bewilders me and I've exhausted my own troubleshooting abilities. I would be happy to share a source file if anyone thinks they could help me that way.
Thanks in advance,
Douglas

There is a known bug in Windows XP that causes random dropped text in
PDF. The hotfix is here, though the link does not seem to be working at
the moment:
http://support.microsoft.com/?id=952909
However, the above link directs you to a download link that is here:
http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us <http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us

PDF has missing text when created from FM 9

My Software:
Windows XP Professional Version 2002 SP 3
FrameMaker 9.0p255
Adobe Acrobat 9 Pro Version 9.4.1
When generating a PDF document from FrameMaker, the PDF document has random missing text, including whole paragraphs, sentences and some text in tables. We have several FrameMaker books and they are all having the same issues. These books were fine when we last published updates within the last month and we have not made any changes to fonts.
When generating a PDF from FrameMaker, we always print the book to a postscript file first following these steps:
- Go to File > Print Book.
- Select the Adobe PDF printer.
- Select the Print to File option and specify a .ps filename.
- Select the Generate Acrobat Data option.
- Use Acrobat Distiller to convert the PS file to PDF.
Note that I also tried File > Save As PDF and got the same results.

Did you reboot after the hotfix? fwiw, other users on the forum have had difficulty with the hotfix not being installed correctly the first time around.
once you download the hotfix from MS you have to run the .exe, and then when it’s finished you have to reboot. Then check the Add or Remove programs in Control panel, and click the “show updates” button, then scroll way down to see the hotfixes, to be sure that #952909 is shown.
What fonts are you using in your documents? Specific type (PS, TT, OTF) and any other info you have (foundry, etc).
Do the "gaps" seem to occur when there are font changes in the document, e.g. when words in a sentence are bold or when a paragraph in a different weight (e.g. bold italic) follows, say, a "regular" text weight paragraph? As another test, can you highlight a segment of good+bad+good text in the PDF, do Control+c to copy it to the clipboard, then Control+v to paste it into a different file (Word, text editor, even another new FM document). Do the words of the "missing" text segments show up?
edit: the hotfix download process is a bit confusing; if I remember correctly it has to be requested, then MS sends a link to the download webpage, then the downloaded .exe has to be run.

Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

Also there seems to be no obvious way to report Office bugs. This is leaving little room for improvement. Not sure if there has been any planning on this front???
For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead). But how do I communicate this to the Office team without knowing at least one of the team personally (which I
don't)???

Hi,
Do you have this issue when pasting in other programs?
If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
Regards,
Melon Chen
TechNet Community Support

Randomly missing group text messages

I am in a group text message and will randomly miss a message or receive them in the wrong order. My husband and I are the only ones in the group that this happens to. The others are on ATT. Is this the reason? The missing texts are from both Iphone and other users.

Hello MOlive13,
Group messaging has really become a fun way to interact with a group of friends at once. In order to participate in group messaging, the devices participating would need to be compatible and have group messaging enabled. This feature may not be available with every device, which may cause problems with receiving messages. One step you can take to ensure your device is set up for group messaging would be going to Settings>Messages and from this screen enable MMS Messaging and Group Messaging.
AndreaS_VZW
Follow us on Twitter @VZWSupport

What is WRONG with Acrobat (Randomly Drops Text)

I'm at the end of my rope
with Acrobat CS3. It randomly distills my contract documents with whole para
graphs missing here and there. Sometimes I can reboot and get the whole document to print, but again today, I have a contract that
didn't print completely even after a full system reboot.
Trying to distill from Word 2003. Short documents of a page are usually okay, though I have been having problems with some lines of text missing on invoices I print out of Excel. But this 5-page contract is giving me headaches.. I'll have to resort to either printing and scanning the doc back in and distilling it as a graphic to PDF, or copying and pasting the whole thing into QuarkXpress, which has a PDF distiller that is 100% reliable. I wish I could use THAT distiller with Word! I can't stand this. Why can't Acrobat distiller reliably distill documents? A contract is a serious thing.. missing paragraphs can mean serious legal trouble!!
I need an alternative, unless there is a fix for this problem.

Hmmm, I hadn't thought of converting it to Postscript first.. I
can print to Postscript printers without this missing text. It's only when I print to Acrobat that text, headers and footers are missing after the first page.
As I am not having trouble printing to Postscript devices, I doubt the hotfix would help. Anyway, there's no clickable download link, and when I request support, they only have a hotfix for Vista and XP SP4. I'm on SP2.
I can print to Postscript driver and then import the PS into Quark and print it out that way. I think that works, as Quark's PDF writer always works flawlessly and with no delays. The Acrobat distiller takes about 2 minutes to create my file, 90 seconds of which, it appears to be frozen still. Quark takes 3 seconds to do the same thing and the resulting PDF has no missing elements.

Missing text in many programs - Rox, Thunar, Deluge, etc [SOLVED]

Hi all,
I'm having a very confusing problem. Basically, text is just missing from certain programs. Here are a few quick examples:
Thunar:
Rox:
Deluge:
It's very strange. First of all, this just started happening recently, and I don't think after an update or anything. But I know "it just randomly started happening" is a dumb thing to say.
Here is the info I think could be useful:
-I have the ttf-freefont package and the xorg-font family of packages
-I have updated and restarted since this happened; nothing has changed
-The filenames look perfect if I just list them in the terminal (no newlines or anything)
-The filenames that have disappeared aren't anything special, it's seemingly random (no weird characters in them)
-The icons are totally fine
-All the things with missing text are still totally functional if I use them
-I thought this was a file manager issue, but it happening in Deluge too, so nope
-I downloaded and tried Nautilus, same deal, but some files had random words from their name appear. Just as bad basically though
-I also downloaded and tried Midnight Commander (a text based file manager) and everything is perfectly fine in it
Any suggestions? This is very mysterious, and driving me nuts.
Thanks!!
Edit: To clarify, in the Thunar and Rox pictures I just took screenshots of a small portion of a folder. In the Deluge pictures, in the first one those 3 blank looking buttons in that menu should have more words (like "Remove Torrent"), and in the second one, those + and - buttons should also have text.
Last edited by Declan (2012-05-10 00:41:48)

Cairo 1.12 was just moved into [extra], so chances are this bug will reappear the next time you -Syu. If you're running Nouveau drivers, then the underlying cause of your issue might be this bug:
https://bugs.archlinux.org/task/29495
If this is indeed your issue, then you need to install the xf86-video-nouveau-0.0.16_git20120512-1 package from [testing]. If you re-enable [testing] and do an -Syu, it should automatically install this package.

JSlider randomly missing tick labels

Hello everyone,
I am having a problem with JSliders. I have an application that has several JSliders throughout. They are vertical, min=100 and max=1000, with major ticks every 100, and minor ticks every 25, and the ticks and labels are painted.
I have noticed that out of say 10 such sliders in my application, perhaps one or two sliders are randomly missing some ticks. For example, the labels will read 100, 200, 300, 400, 500, 600, 700, 900, 1000 (with the 800 just missing). The space for the text is there, but no text.
As I mentioned, this doesn't always occur. It occurs perhaps on one or two sliders out of 10 every time I start the application. So this would seem to me to be related to a threading issue.
Here is the constructor that creates the panel that has the JSlider in it:
 try{
 SwingUtilities.invokeAndWait( new Runnable(){ public void run(){
 // INIT GUI & CUSTOM INIT
 initComponents();
 depthJSlider.putClientProperty("JSlider.isFilled", Boolean.TRUE);
 catch(Exception e){ Util.handleExceptionNoRestart("Error building Log Table", e); }
Here is initComponents() which actually does the work:
 private void initComponents() {
 depthJSlider = new javax.swing.JSlider();
 depthJSlider.setMajorTickSpacing(100);
 depthJSlider.setMaximum(1000);
 depthJSlider.setMinimum(100);
 depthJSlider.setMinorTickSpacing(25);
 depthJSlider.setOrientation(javax.swing.JSlider.VERTICAL);
 depthJSlider.setPaintLabels(true);
 depthJSlider.setPaintTicks(true);
 depthJSlider.setSnapToTicks(true);
 depthJSlider.setToolTipText("<html>\nEvent Log Depth Slider \nThis slider allows you to specify the maximum number of visible\
events \nwhen the \"Refresh Log\" or \"Start Auto-refresh\" buttons are pressed.</html>");
 depthJSlider.setMaximumSize(null);
 depthJSlider.setMinimumSize(null);
 depthJSlider.setPreferredSize(null);
 gridBagConstraints = new java.awt.GridBagConstraints();
 gridBagConstraints.gridx = 0;
 gridBagConstraints.gridy = 0;
 gridBagConstraints.fill = java.awt.GridBagConstraints.VERTICAL;
 gridBagConstraints.weighty = 1.0;
 gridBagConstraints.insets = new java.awt.Insets(5, 5, 5, 10);
 tableJPanel.add(depthJSlider, gridBagConstraints);
 }Does anyone have any ideas at all why some of the labels might be missing?
(Please drop a line to [email protected] if you have any thoughts!)
Sincerely,
Ian

No problems in j2se 1.5.0
import java.awt.*;
import javax.swing.*;
public class SliderTest {
 private JSlider getSlider() {
 JSlider slider = new javax.swing.JSlider();
 slider.setMajorTickSpacing(100);
 slider.setMaximum(1000);
 slider.setMinimum(100);
 slider.setMinorTickSpacing(25);
 slider.setOrientation(javax.swing.JSlider.VERTICAL);
 slider.setPaintLabels(true);
 slider.setPaintTicks(true);
 slider.setSnapToTicks(true);
 slider.setToolTipText("<html>Event Log Depth Slider" +
 " This slider allows you to specify the maximum " +
 "number of visible events when the \"Refresh Log\" " +
 "or \"Start Auto-refresh\" buttons are pressed.</html>");
 slider.setMaximumSize(null);
 slider.setMinimumSize(null);
 slider.setPreferredSize(null);
 return slider;
 private JPanel getPanel() {
 JPanel panel = new JPanel(new GridBagLayout());
 GridBagConstraints gridBagConstraints = new java.awt.GridBagConstraints();
 gridBagConstraints.fill = java.awt.GridBagConstraints.VERTICAL;
 gridBagConstraints.weighty = 1.0;
 gridBagConstraints.weightx = 1.0;
 gridBagConstraints.insets = new java.awt.Insets(5, 5, 5, 10);
 for(int j = 0; j < 10; j++)
 panel.add(getSlider(), gridBagConstraints);
 return panel;
 public static void main(String[] args) {
 SliderTest test = new SliderTest();
 JFrame f = new JFrame();
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 f.getContentPane().add(test.getPanel());
 f.setSize(800,400);
 f.setLocationRelativeTo(null);
 f.setVisible(true);
}

Missing Text In Pages 08 Document

I'm having an issue with a Pages 08 document. I recently opened it and seemingly random chunks of text are missing. The document retains the original formatting, so it looks as if the "missing" text was turned to white. But, that is not the case. It is missing altogether. What's even stranger, the missing text shows up in Quick Preview. Can anyone help?

You have to make sure you have the latest update of Pages'08. The version is 3.0.3
Also validate your fonts in the Font book in you Application folder. Delete duplicates.
It is always wise to do Repair Permission when having done a major installation like the system update.
Starts with these advises. There are others thing that can be tried too.

Is there a solution to PDFs missing text?

Hi there,
I've been having a problem with PDFs generated from documents created in Frame 9 missing random blocks of text. From reading the forum, I see that this is a well known issue. I've tried both the MS hotfix and deleting the fntcache.dat file. Deleting the fntcache.dat file is the only thing that has worked. Has anyone else run the hotfix without any positive results? Am I doomed to deleting fntcache each time I want to create a PDF?
Any insight is much appreciated. Thanks!
Jeff

Arnis Gubins wrote:
Are you by any chance using any of the OTF Pro/W1G/COM type of fonts? Are you also using CMYK PDF generation? If so, then this is a known bug.
Well, the known bug with many of these fonts is: text is displayed with the TimesNewRoman font. I didn't have missing text blocks using them, and I'm not aware of anybody else who has.
The MS patch should definitely work. It does work here on all machines (all running Windows XP Pro SP2(!)). I know of some other font related problems with XP SP3.
If it still doesn't work: deleting the fntcache.dat is not necessary for each PDF, it's necessary once a day. The daily procedure in this case is:
- Start your PC
- Delete the fntcache.dat
- Reboot
Now PDF creation works as expected, until you reboot again. If you have to do this for whatever reason, delete the fntcache.dat again before rebooting.
Bernd

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

Pages 5.2 Table missing text when printed

I created a document with several tables. These tables contain algebra formulas with superscript. I read in another forum that the issue may be the use of the superscript. However their problem only occurred when printing the document as a PDF. I am having the problem printing from both Pages and as a PDF. Some superscript appears as it should. Not all missing text is superscript.
Any ideas? I hate to have to recreate this document in Word. I took me forever to create.
Mavericks 10.9.3
Pages 5.2

Known limitation with Pages v5.2. If you had Pages ’09 installed before the upgrade downgrade to Pages v5.2, it was moved to /Applications/iWork ’09.
You will need to export from Pages v5.2 as Pages ’09 in order to process your work in the older Pages version. You will also need to open the Pages ’09 document either through that Applications file chooser, or via the right-click, contextual menu Open with > Pages (4.3). Double-clicking with both Pages installed will default to using Pages v5.2.
LibreOffice is a free alternative to MS Word, and works better with Mavericks than does OpenOffice.

Missing texts in WEB with F4-help combined with variable input.

I've defined a characteristic with text : short text, medium length text and long text. The texts are language independent.
I've defined a variable for this characteristic and I've defined a BEX-report that provides a variable-filter for this characteristic in the filter area. I've also set the property Display as to text or Key and Text
When I start the report the prompt-window appears and then I can perform F4 on the input field for this characteristic. Then a selection box opens showing the key and all texts - short desription, medium descr. and long desc.
If I use this report in the web-Application designer or if I launch this report directly in the WebBrowser I'll also get a selection box but no texts appear.
What can I do to see these texts also in WEB ? Where can I influence the search help for the web (in BEX it works perfectly) ?
Additional information: By defining the info object there is a tab for Business Explorer settings. For general settings I've choosen Text for the property Display. What is really strange is that in Bex-Explorer the property Display as always shows Key as a default although I've entered Text in RSA1. I've also inspected other characteristics where there are no missing texts. Here I've found out that in the info object there is Text choosen as attribut for Display -> in the Bex itself Text is shown as a default too.
Message was edited by: Stefan Vogler
Message was edited by: Stefan Vogler

Hello there,
I am having a similar problem but I have found this is due to either of two reasons.
1) The object is compounded
2) The compounded object is authorisation relavant and the security is stopping the masterdata being read properly.
Hope this helps narrow down your search.
Paul

Missing text in RoboHelp 7 when previewing/generating Frame files

This is a new issue for me. Until last week, it seemed to work fine. Now, though, whenever I import by reference my frame files I have noticed that, while they look fine in the Design view, when I click Preview it has missing text in parts. In one file, which was all text (no graphics), it was completely in Preview. Then, when I generated the help, that topic was still blank.
This doesn't always happen, though. Sometimes a topic is fine up to a point, then, all the text is gone, leaving only the screenshots. It generates that way also. On the other hand, some files come out fine, with no missing text. (This is only apparent in the Preview and generated help.)
I'm using TCS 1, that has RoboHelp 7, and I generate to WebHelp. I've applied an update that makes it 7.01.001. I've also applied the "missing space" fix that Peter Grainge suggested (it worked ).
Like I said, TCS worked fine up to last week, then I started seeing these missing chunks of text. I tried creating a new RH project and starting all over, importing only one small file that had all text and no screenshots/graphics. Both the preview and generated help came out blank, although I could see it plainly in the Design view before generating.
Has anyone else had this issue, or know what it might be?

Below is from one topic that didn't show any content at all for Preview or generated output, (taken from RH). That is, it showed nothing when I opened it in IE9, but in Firefox it displayed just fine. I tried replacing <head> with the one above (in the output), but it didn't seem to do anything. I'll keep trying, though!
dan
=============================================================================
<!doctype HTML public "-//W3C//DTD HTML 4.0 Frameset//EN">
<html><head>
<meta http-equiv=Content-Type content="text/html; charset=utf-8">
<meta name=Originator content=ImportMif>
<meta name=OriginalFile content="C:\CVS\doc\integrator\6.0.0.0\RoboHelp\CIS_RH\IDE\ide3.fm">
<meta name=generator content="Adobe RoboHelp - www.adobe.com">
<meta name=generator-major-version content=0.1>
<meta name=generator-minor-version content=1>
<meta name=filetype content=RoboHelp>
<meta name=filetype-version content=1>
<meta name=page-count content=1>
<meta name=layout-height content=6060>
<meta name=layout-width content=921>
<title>File_Transfer</title>
<link rel=stylesheet href=ide3.css>
</head>
<body>
<h1><a name=XREF_File_Transfer></a>File Transfer</h1>
The File Transfer dialog allows users of client-only
installations who are remotely connecting to the Host Server to manipulate
the files on the remote machine.
Use the File Transfer dialog to copy files to a fixed
directory on the server called shared_files.
This directory resides within the root. A status dialog opens during the
operation showing progress, and includes the file name and the percentage
of the operation that is complete/remaining.
The shared_files directory
is automatically created the first time File Transfer is used. 
<h2>Using the File Transfer</h2>
Select File>File Transfer
to open the File Transfer dialog.
<div style="text-align: center;" align=center>
<implicit_p><img id=15 src="ide300016.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
The shared_files folder is
the top-level folder from which users manage files and folders. 
<h2>Menu Bar Options</h2>
<h3>File Menu</h3>
New Folder 
Creates a new directory on the server within the user-selected folder.
Type the new folder name in the Create New Folder dialog and click OK. 
Transfer File 
Specifies a local file to transfer to the server. Once the file is selected,
the user can initiate the file transfer.
Move Folder/File 
Moves a file or directory from one location within the shared_files
hierarchy to another location.
Rename Folder/File 
Renames a directory or file within the shared_files
hierarchy. Type the new name in the Rename File/Folder dialog and click
OK. 
Delete Folder/File 
Removes a directory or file from the remote server. 
Properties 
Shows information about the selected remote file or directory, including
file size, modification time, and name.
Refresh 
Updates the screen to show the latest information.
Close 
Closes the dialog. 
NOTE: Right-clicking a folder or file
on the File Transfer dialog opens a pop-up menu with the same File menu
options (except Close).
<h2>Status dialog</h2>
To monitor the progress of the transfer, a status dialog
opens when a file transfer begins. 
<div style="text-align: center;" align=center>
<implicit_p><img id=16 src="ide300017.jpg" style="width: 314.249pt; height: 149.250pt;"
width=419 height=199 border=0>
</div>
 
The following information is provided:
File 
Names the local file being copied.
Status 
Specifies the text status of the copy operation.
Copied To 
Specifies the destination file location on the server.
X of Y 
Specifies the number of bytes transferred out of the total number of bytes.

Progress Bar 
Provides a visual indicator of the copy operation’s progress.
<h2>Additional Information on the File Transfer</h2>
<h3>Concurrency and Synchronization</h3>
Only one file copy operation can occur at a time. Multiple
users can, however, transfer files to the server simultaneously and manage
separate folders on the server. 
<h3>Security</h3>
Users cannot manage files and folders outside of the
shared_files root. 
<h2>How to Transfer Data</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer
on the IDE. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
the shared_files subfolder in which to place
the transferred file.</li>
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>Transfer
File. This opens a file selection dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Specify
the local file to transfer to the selected shared_files
subfolder. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
Start on the status dialog.</li>
<div style="text-align: center;" align=center>
<implicit_p><img id=17 src="ide300018.jpg" style="width: 314.249pt; height: 149.250pt;"
width=419 height=199 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Click
Done when the transfer is completed.</li>
</ol>
<div style="text-align: center;" align=center>
<implicit_p><img id=18 src="ide300019.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
<h2>How to Create a New Directory</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer.
This opens the File Transfer dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
where to place the new folder.</li>
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>New Folder.
This opens the Create New Folder dialog. </li>
<div style="text-align: center;" align=center>
<implicit_p><img id=19 src="ide300020.jpg" style="width: 264.000pt; height: 94.499pt;"
width=352 height=126 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Type
the new folder name. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. The new directory folder appears in the
directory structure.</li>
</ol>
<div style="text-align: center;" align=center>
<implicit_p><img id=20 src="ide300021.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
<h2>How to Move a File or Directory</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer.
This opens the File Transfer dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
the file to move.</li>
<div style="text-align: center;" align=center>
<implicit_p><img id=21 src="ide300022.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>Move Folder/File.
This opens the Select Move Destination dialog. </li>
<div style="text-align: center;" align=center>
<implicit_p><img id=22 src="ide300023.jpg" style="width: 280.499pt; height: 214.500pt;"
width=374 height=286 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Highlight
where to move the file. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. </li>
</ol>
<h2>How to Rename a Directory or File</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer.
This opens the File Transfer dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
the file to rename.</li>
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>Rename Folder/File.
This opens the Rename File/Folder dialog.</li>
<div style="text-align: center;" align=center>
<implicit_p><img id=23 src="ide300024.jpg" style="width: 278.249pt; height: 94.499pt;"
width=371 height=126 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Type
the new name. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. </li>
</ol>
</body>
</html>

Missing text in PDF when I use Acrobat 9.2 and FM 9

I was able to PDF ok from FM9 using Acrobat 6, but when I upgraded to Acrobat 9.2,
I'm getting some missing text in the PDF. Some non-bold text is missing. The number
for Chapter 3 is missing in the TOC. Any suggestions?

I was able to PDF ok from FM9 using Acrobat 6, ...
What font name, format (TTF, PFB/PFM, OTF?) and vintage?
Did you upgrade the fonts when upgrading the apps?
Any chance you have multiple copies of the same typeface name installed? Historically, having both the TTF and PFM (Type 1) of the same name installed could have undesired results.
... but when I upgraded to Acrobat 9.2, I'm getting some missing text in the PDF. Some non-bold text is missing.
What is "some text"? Some entire typefaces (all text thereof), or just some characters of a typeface, like, say, the ligatures in Helvetica.
The number for Chapter 3 is missing in the TOC.
What font is Frame looking for?
Also, are you embedding the fonts during PDF creation?

Random missing text in brochure

Similar Messages

Maybe you are looking for