Random Pause before booting OS

I have a uMBP 13" that I picked up about a month or two ago. Last night when I turned it on the SuperDrive made the normal "zip-zeep" noise before booting, but the screen was black and the display standby LED was lit. After about 3-4 seconds it booted like normal. This has happened once before when I restarted my computer (at that time on Leopard). Currently I'm on Snow Leopard.
I'm not sure if this is normal or not, but I suspect the EFI 1.7 and it's screwy SATA goodness to be a culprit if there's an issue. Note that everything else has been fine, and I've had no glitches while actually operating the laptop.
Any help or explanation would be greatly appreciated.

PSU: ATX switching power supply
+5V 35A
-5V 0.5A
+12V 16A
-12V 0.8A
+3.3V 24A
+5 2A
Yes, that's pretty weak for modern machines. Go for better one.
Go for quality PSU single rail with 30A[or more] @ +12V
>>> PSU's---2 x 12v---The Dual Rail Myth <<<
>>> Is your problem caused by your PSU? <<<
More information: https://forum-en.msi.com/index.php?topic=112039.msg836246#msg836246

Similar Messages

  • Pause before boot sound, should I worry?

    Just yesterday I started noticing that whenever I power up my MacBook Pro it's taking around 15-20 seconds between the time I press the power button and when I hear the Apple bootup sound. During this time the screen is blank and I hear none of the usual startup noises. This only happens when cold booting, not when waking up from sleep. Should I be worried?

    Thanks. I guess what's bugging me is that this only seemed to show up in the last couple of days. Normally (meaning before now) the boot sound was almost instantaneous after I pressed the power button. But perhaps I'm just a little gunshy after reading all the problems other people have had with their MBPs. So far I've not had any (other than the fact that it's hot, but CoreDuoTemp tells me it's not to the point where I have to worry about damaging the processor).
    Week 10 MacBook Pro 2.0gHz Mac OS X (10.4.7) 2GB RAM

  • Random pauses during media playback with WH-920 He...

    Currently running Windows Phone 8.1 on a Lumia 925.
    Bought a pair of Purity WH-920 earbuds when my old Senheisers bit the dust (after 3 years), and loved them for about 3 months... Had the right channel die, and the replacement pair only lasted a month before they went down with the same problem. Currently just got my second replacement pair... fingers crossed.
    My question is related to playback after I got my first repalcement. I noticed that I was having a lot of problems with my music app and podcast app randomly pausing, requiring me to either wait 5-10 seconds before it would resume through the remote, or pulling the phone out to resume playback through the screen.
    This issue seems to be related to the phone being in my pocket. If I use it on my desk with headphones, it seems to be fine, but as soon as it goes into my pocket the pausing issue starts. I'm being very careful to not crimp the cord in my pocket, my phone sits in it vertically with the headphone cord coming straight up and out... Is this a known issue with this product? If so, is there a way to fix it via a setting on my phone? It defeats the purpose of having headphones if I can't move while listening to them... It I want to listen to music while sitting still at my desk, I have speakers for that.
    Thanks in advance!

    I have the same MB and CPU but I am using the onboard sound and have not had any problems with that.
    I can recommand that you bump up your memory voltage to 2.6~2.7 and loosen up your memory timings to something like 2.5-5-5-8-2T.
    Then remove all drivers from your Audigy, disable your onboard sound and remove those drivers, shut down and install your Audigy and boot up allowing Windows to find your new hardware and then install the drivers.

  • ITunes randomly pausing?

    Sometimes while iTunes is playing, it'll just randomly pause. I haven't pressed any buttons and I'm not even in the iTunes program window.

    I was using Vista32 and iT 7.5, since there were no drivers for iPhone for Vista64 and had no problems.
    After 7.6 came out, I made a clean installation of iTunes 7.6 and started having those random pauses. At first iT starts up and I cannot do anything for a while. Then it starts to work, but after a while it freezes again.
    I formatted my system and installed iT 7.6 right from the beginning before any other application. Same problem.
    Since 7.6 supports Vista64, and I have 4Gb installed, I decided to format with Vista64. Again, I installed iTunes without any other application installed.
    SAME PROBLEM!!!

  • Random pause bug?

    Hi all,
    I ordered a new iPod 2G Nano 8GB when they were announced. Generally I've been very pleased with it (my first iPod).
    One thing that is starting to drive me nuts is that sometimes it will pause while playing a track for no apparent reason.
    This can happen whether:
    - it is in 'hold'
    - using the supplied Apple ear-buds or third party ones
    - playing music or podcasts
    It doesn't seam to happen when the iPod is in the dock and I am listening through the dock's line-out.
    Some tracks almost always have the problem (particularly some enhanced podcasts), playing these it can pause five times in a 20 second section before I give up!
    Other times it can go hours without happening.
    Mostly I use my iPod while doing computer work at a desk (with the iPod lying on the desk) - so it doesn't get bashed around. I'm not using any case.
    Does this sound like a known bug? Is there anything that I can do - or should I return it as a lemon to Apple?
    Thanks in advance for any suggestions!
    2G iPod Nano 8GB   Windows XP  

    Same problem here with my 8gb nano. The ipod haves these seizures when the random pausing occurs, and sometimes there's no sign of this problem. In my experience it's not a problem in the headphone plug, because this happens when the ipod doesn't move at all. I think that the flipping the back cover upwards makes the pausing worse. But I'm not sure. Does it with the ipod -earplugs and my 3rd party ones. In my case there is no skipping forward in the songs. But when the ipod has these seizures, the pausing happens 5-10 second intervals. The 1.1.1 firmware didn't help either.
    I'm taking it to the local Apple repair shop tomorrow and let's see what they say. I hope I'll get a replacement right away, because I don't think that the problem is clear even to Apple.
    8gb 2nd Gen iPod Nano   Windows XP Pro  

  • Ipod nano keeps randomly pausing.

    Ipod nano keeps pausing mid song and it's not the headphones... I've tried different sets of headphones & even held them in so they were flush. Still keeps happening. Been listening with no issue for about 2 hours before it started happrning all of a sudden. sometimes it will play 10 second sometimes it will [lay a few minuts but it always eventually pauses itself. Any ideas?

    I just received my brand new 7th Gen iPod Nano today, ordered directly from the Apple website, and I am experiencing the exact same issue. I have tried several diffent pairs of headphones and regardless, the iPod randomly pauses. I also noticed that on occasion if I press play the iPod will indicate that it is playing music however no sound comes out of the headphones. It seems pretty clear to me the headphone jack is faulty... I suppose I'll need to get on the phone and deal with the highly inconvenient process of exchanging it. Very disappointed.

  • Ipod Randomly Pausing Songs

    hi all,
    Just before i went on holiday i bought the isound 2.1 sound dock system, and also updated my ipod touch to 1.1.5 update
    Since then, my ipod randomly pauses songs, regardless of the screen being on / off, the lock feature being on / off, using the dock speakers, 3.5 jack speakers, or earphones
    im really hoping its down to a firmware issue but i have no idea.
    Any suggestions?

    The iPod will pause if you pull the earbud jack out - this is a feature. Unfortunately sometimes a set of earbuds will have a jack this is just a bit loose and this will fool the iPod into pausing. Try using a different pair of buds. If the problem continues with a different set of earbuds, give Apple a call.

  • IPod Touch randomly pausing, starting, and fast forwarding?

    I have a 16 GB 2nd gen iPod touch and about 6 months ago I purchased Beats by Dr. Dre for them. They worked perfectly until the headband snapped. I then switched to using the earbuds that came with the iPod. A few days ago I purchased another set of Beats by Dr. Dre. They worked fine while using them the first time, but the second time using them any song I would listen to would randomly pause, start, and fast forward. I switched back to the earbuds that came with thr iPod and the problem didn't occur. I'm not sure what the cause of this is so if anyone could help it'd be much appreciated.

    Hello,
    I am having a similar problem with my 5th generation Nano (5 weeks old). It started about 1 1/2 weeks ago and paused in only 1 song. When I touched the right side of the screen, the song restarted and continued playing. It happened 2 more times on different days and in different songs. Tonight, it paused 7 times during 3 or 4 consecutive songs. I used the same procedure as above to restart each time. Tonite, after a few more songs played without pausing, I backed up to the first song that had paused and let the song sequence replay. No problems this time??? I have not noticed if there is any fast forwarding occurring, but some songs end abruptly before the end (a separate problem). I am thinking that there may be a glitch at a certain spot on the Nano hard drive causing songs to pause. Is that possible? When playing, my Nano sits on a desk top and nothing is touching it. Thanks in advance.

  • I am using iCloud email and my emails are randomly disappearing before I can read them. They are not in any folders on my iPhone and I am having to call apple to have the last 7 days of email sent to me in order to retrieve what is being lost.

    I am using an apple email account and my emails are randomly disappearing before I get a chance to read them. They are not anywhere on my device, not trash, junk etc. The only solution from apple has been to resend me the past 7 days of email in order for me to retrieve the missing emails. This has taken me hours on the phone with apple support with no solution. I just don't know what to do. They have gone over the settings with me and nothing has solved the problem. I don't know where to start since it is happening on all my devices.

    Control-click on the background of the view all pages window and select "Preview Calendar" from the contextual menu.
    You can also save the pdf as a file to compare to the printed calendar.  If the two names are visible in the pdf file then the printed copy should show them.  Contact Apple for a refund.  Apple Print Products - Apple Store (U.S.)

  • Ipod 160 classic random pause

    Ive read other people having a problem with their ipod 160classic randomly pausing for 2 secs then resuming play from where it left off. Ive also read this is probably an inherent design flaw with to small of a cache because it happens with larger files( i've only had it happen with my apple lossless files and wavs as opposed to my 256vbr mp3s). Is there any fix ive restored, my ipod defragged it, took off album art, and nothing helps. Nothings more annoying than having a random pause as your getting into the music then to have it continue where it left off. THe problem cannot be recreated its random if you rewind to where it occurred it wont repeat there but somewhere else. this happens 5 or more times per hour for me using the higher bit files.
    I bought the 160 for the purpose of storing lossless files yet cant do it without this annoying problem is there a fix or a downgrade. Heck id be happy with no other features or color just to have it not pause while playing music. Ive also read that rockbox is not coming out for the classic and was hoping that might fix the problem. Any soulutions would be appreciated thanks for your time, -Shane

    Hi Mitch, that is a really great point. I so rarely listen to the iPod undocked for extended periods, I decided to test it this morning.
    I have been listening to it now, undocked for around 4 hours and have heard no pauses at all. Yesterday, it was pausing about every 10 minutes or so while playing in the dock. Maybe this is significant to determining the issue...
    Thanks for asking the question, and leading me to a workaround..
    It certainly means I can enjoy the iPod again, even if it's plugged into my HiFi using the headphone jack, and running on battery power. Still sounds great.
    It would be nice if the device worked properly while docked, but I'm a lot happier now regardless.
    Cheers, Bill

  • Kernel must be loaded before booting

    Hi,
    Pls help me to solve this error "kernel must be loaded before booting".
    when i boot linux it comes to grub terminal and when i boot from grub terminal it shows the above error.
    I tried with the following commands to recover:
    1. find /boot/grub/stage1 :
    O/P: Error:15 file not found
    2. boot:
    O/P: kernel must be loaded before booting
    Thanks in Advance

    I think the issue is similar, if not the same, as in the following thread: Oracle enterprise linux installs OK, but opens up a grub command prompt ?

  • I play Zuma Blitz on FB; Ever since I upgraded to Firefox 4 I can't play the game the darn frog pauses before shooting and it's a mess; you know it's what I enjoy doing and it needs to be fixed can you help me with this??? Thanks

    Question
    I play Zuma Blitz on FB; Ever since I upgraded to Firefox 4 I can't play the game the darn frog pauses before shooting and it's a mess; you know it's what I enjoy doing and it needs to be fixed can you help me with this??? I am super frustrated ith the situationThanks

    Upgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....

  • Randomly Pausing Audio Playback/Restoring Question

    My iPhone 3G will on it's own, randomly pause audio playback (Pandora, iPod) when a 3.5 mm jack is plugged in, this takes any-wear from 10 secs to 30 mins, and this never happens when I use Apple OEM iPhone headphones. I went to an Apple store and the proposed resolution was to restore my iPhone as new. So my first question is: if I restore my iPhone as new, load music and a few apps on it and this does not fix the problem, can I restore my iPhone to the current state that has all my apps and data? My other question is, does anyone else have this problem?
    Thanks!
    -Mike

    I don't have this problem.
    But your question about restoring your phone to it's current state, yes. When you plug your iPhone into iTunes, right click on the phone in the column on the left and select "backup phone". (That is if iTunes doesn't automatically start syncing/backing up.) After that you perform a restore which erases the phones and updates to the current version. At that point, iTunes should prompt you to install the backup.

  • An Apple genius pressed a few buttons before booting my computer then the screen changed to a database of parts of my computer and their status. How do i do this?

    An Apple genius pressed a few buttons before booting my computer then the screen changed to a database of parts of my computer and their status. How do i do this?

    Julianwerules wrote:
    then the screen changed to a database of parts of my computer and their status.
    can you elaborate more?   I'm not familiar with a database of parts..or I'm having a major brain ****.

  • PS not letting me edit some random commands before executing them...

    PS not letting me edit some random commands before executing them, including Duplicate, Fill, Print Preview, Stroke...possibly others I haven't discovered.  When I click the dropdown choice, an edit window used to let me tailor pixel widths, color, etc. (I know, [it's what] 'edit' means). Now, the little eyedropper icon replaces my cursor, all top menus are grey except 'View' and 'Window', I get that awful 'doont!' sound, and my only option is to just hit 'Enter' and it executes the command with whatever preferences I last set before this problem, usually of no present use to me. I have relaunched PS, restarted the computer with no other tasks and relaunched, and impotently shaken my fist at the screen to no avail. Please help me, and if you'd be so kind, just email me the answer 'proteus19m (at) yahoo (dot) com'. Thank you very much.

    Try resetting your preferences.  Start PS and hold down crtl alt shift keys (cmd option shirft on mac) immediately.  If fast enough you will get a reset window.

Maybe you are looking for

  • Error while executing in the DB adapter

    hi When i register some service in the ESB console. i get this error when the Db adpater try executing the stored procedure. stored procedure is not getting executed through the DB adapter, but when it is checked individually it works. but in the ESB

  • My iphone is eating up data quickly. Help

    I upgraded to iphone 4 on Thursday and in less than 48 hours I've managed to use nearly a 100mb of data. The only apps I've downloaded (downloaded from pc not directly off phone) are BBC news, facebook, live profile, met office. I've switched locatio

  • Importing and Organizing Thousands of Photos into IPhoto

    How can I import about 20 thousands photo into IPhotos and keep the logical organization? I just buy a Mac Mini and I start trying to move my photos. These are organized in directories by dates with a customize description for the occasion ( -/YEAR/Y

  • Missing external hard drive

    Hi. I've been using my external HD for the last few days but since this morning it doesn't show up on my macbook pro. Not on finder nor on the desktop. Neither on Disk Utility. It's not a problem of showing the hard drive, it's more like the computer

  • Generating Ruby Web Service Access Classes from a WSDL

    If you have tried to consume a web service from Ruby you surely have noticed how annoying is to write manually all the Ruby code just to invoke a service with complext input parameters' structure: - You have to know what do the input parameters, thei