Random performance problems
Hello,
We have a medium sized internet application which is experiencing random performance problems. The applications data is stored in xml which is read/saved every page hit to a clob. The table which holds the clob has the cacheing option enabled and the clob is stored out of line (clob sizes range from 14k - 1mb)
THE PROBLEM - Normally the read/write takes 5-10 seconds. We have been experiencing times of up to 350+ seconds. This is not a locking issue. When writing the clob to the database, we do not chunk, we simply pass the entire xml string at one time.
Any ideas how you would debug this problem? Has anyone ran into any other similar problems?
Joshua,
Have you checked out LOB performance guidelines at http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96591/adl09bes.htm#120857? What release (9.2?), configuration (JDBC OCI or thin?), storage options (tablespaces, extent sizes, etc.) are you using? Do you have connection pooling in place? There are many possib
If you have a customer ID, you can also file a TAR at http://metalink.oracle.com to someone help track down what the problem might be.
Regards,
Geoff
Similar Messages
-
Performance problems with Leopard 10.5.1
Hello,
I use an iMac 24 Alu 2,8Ghz and upgraded to Leopard. There are some major performance problems and bugs in the recent version of Leopard:
1. While accessing USB devices, the display speed, windows moving, animations etc. slow down
2. Adobe CS3 Photoshop 10.01 and Flash CS3 are sometimes extremly slow. I tried the recent demo packages from Adobe:
2.1. The Photoshop dialogue "save for web" slows down the system completly, and this problem stays when quitting Photoshop. A restart is neccessary then.
2.2. Flash CS3 movie preview is very slow and stuttering. It's so slow you cannot imagine how the real movie flow will be.
2.3. Recent Flash Player 9,0,115,0 with hardware acceleration enabled doesn't really work with QuartzGL enabled Leopard: The movies slow down a lot. Try www.neave.tv for example.
3. Safari, Mail and other bundled software hang sometimes. You have to force quit them then. It doesn't matter whether QuartzGL is enabled or not. This especially happens to my system if it is online for some hours.
4. A lot of Apple applications doesn't seem to work with 2dextreme enabled. Why this? Apple supporters told me in Leopard there will be a much better 2dextreme support. Also Quartz2dExtreme in OSX 10.4 worked with all applications and i guess it's the same feature like "QuartzGL" in Leopard. So Leopard isn't finished here. It would be nice if Apple could make it's own software QuartzGL compatible.
5. Very often the desktop slows down or lags. This is the main reason I often still witch to Windows XP PC to do work in a faster, less annoying way.
6. Safari crashes randomly sometimes. It is unstable still. Also it crashes more often if you resize/move the window a lot, so I guess it is a graphics extension-related problem.
I hope you people from Apple will fix these annoying points and optimize your new system in the next update release.
Best regardsThanks for you answer. I repaired in the way as described above. There were some errors, some file index was wrong (don't remember exactly the phrase), now the DU reports the partition was successfully repaired / the volume appears to be ok.
The crashes in Safari are gone, but all other described problems still exist. Adobe CS3 is not really usable for me.
By the way, in iMacSoftwareUpdate 1.3, which was replaced by OSX 10.5.1 update, there is one extension called AppleVADriver.kext that does not exist in the OSX 10.5.1 update. Is it an important extension? -
Hi all,
I'm having some performance problems and i have generated an AWR of a day and i have seen this following things:
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time Wait Class
CPU time 50,318 41.7
db file sequential read 6,688,472 32,711 5 27.1 User I/O
Backup: sbtwrite2 1,068,309 7,903 7 6.6 Administra
db file scattered read 1,012,065 6,999 7 5.8 User I/O
PX Deq Credit: send blkd 231,401 4,989 22 4.1 Other
Operating System Statistics DB/Inst: CAPDB14P/capdb14p1 Snaps: 15710-15778
Statistic Total
AVG_BUSY_TIME 3,221,704
AVG_IDLE_TIME 4,923,831
AVG_IOWAIT_TIME 2,302,776
AVG_SYS_TIME 537,429
AVG_USER_TIME 2,682,900
BUSY_TIME 6,446,121
IDLE_TIME 9,850,381
IOWAIT_TIME 4,608,322
SYS_TIME 1,077,598
USER_TIME 5,368,523
LOAD 0
OS_CPU_WAIT_TIME 1,999,898,469,700
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 12,201,893,888
VM_OUT_BYTES 476,655,616
PHYSICAL_MEMORY_BYTES 8,568,512,512
NUM_CPUS 2
NUM_CPU_SOCKETS 2
###########################3
I think that we are having CPU problems here !!
All my memory caches are good, 99% hit.
Anybody agree with me???
Tks,
PauloI have problems on some queries that have another wait event related to RAC.
"gc cs multi block request" is taking a lot of time on some queries. These queries run very fast at another databas that isn't a RAC database.
Example:
1-Tables has the same number of rows!!!!!
2-Both tables and indexes are analyzed using the same tool (DBMA_STATS)
####RAC DATABASE####
SELECT 1 from dual
WHERE NOT EXISTS (SELECT 1
FROM mensalidade a
WHERE data_vencimento >= CHAR_TO_DATE('20070201'));
----Explain
SELECT STATEMENT, GOAL = ALL_ROWS 4 1
FILTER
FAST DUAL 2 1
PX COORDINATOR FORCED SERIAL
PX SEND QC (RANDOM) SYS :TQ10000 2 1 7
PX BLOCK ITERATOR 2 1 7
INDEX FAST FULL SCAN BRCAPDB2 IMENSALIDADE1 2 1 7
----It takes more than 500 seconds to run
####STANDALONE DATABASE####
SELECT 1 from dual
WHERE NOT EXISTS (SELECT 1
FROM mensalidade a
WHERE data_vencimento >= CHAR_TO_DATE('20070201'));
----Explain
SELECT STATEMENT, GOAL = ALL_ROWS 4 1
FILTER
FAST DUAL 2 1
PX COORDINATOR FORCED SERIAL
PX SEND QC (RANDOM) SYS :TQ10000 2 2 16
PX BLOCK ITERATOR 2 2 16
TABLE ACCESS FULL BRCAPDB2 MENSALIDADE 2 2 16
----It takes 0.1 seconds to run -
Performance problem on wait event PX Deq: Execute Reply
Hi everybody
I encounter some performance problem, I've made a tkprof on a select statement and I saw that more than 95% of the elapsed time is due to event PX Deq: Execute Reply.
This request is not CPU or paging consuming. What is this event and how could I reduce it ? Could it be a disk problem ?
Thanks a lot, best regards
Greg
Here is a sample of my tkprof:
call count cpu elapsed disk query current rows
Parse 1 0.03 0.03 0 0 0 0
Execute 1 0.22 2.16 68 177 12 0
Fetch 2 0.17 511.97 38 40 0 1
total 4 0.42 514.16 106 217 12 1
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 38
Rows Row Source Operation
1 PX COORDINATOR (cr=202 pr=103 pw=0 time=513984636 us)
0 PX SEND QC (RANDOM) :TQ10003 (cr=0 pr=0 pw=0 time=0 us)
0 HASH GROUP BY (cr=0 pr=0 pw=0 time=0 us)
0 PX RECEIVE (cr=0 pr=0 pw=0 time=0 us)
0 PX SEND HASH :TQ10002 (cr=0 pr=0 pw=0 time=0 us)
0 HASH GROUP BY (cr=0 pr=0 pw=0 time=0 us)
0 HASH JOIN (cr=0 pr=0 pw=0 time=0 us)
0 BUFFER SORT (cr=0 pr=0 pw=0 time=0 us)
0 PX RECEIVE (cr=0 pr=0 pw=0 time=0 us)
0 PX SEND BROADCAST :TQ10000 (cr=0 pr=0 pw=0 time=0 us)
473 TABLE ACCESS FULL DIM_CALL_DISTANCE (cr=8 pr=7 pw=0 time=27259 us)
0 HASH JOIN (cr=0 pr=0 pw=0 time=0 us)
0 BUFFER SORT (cr=0 pr=0 pw=0 time=0 us)
0 PX RECEIVE (cr=0 pr=0 pw=0 time=0 us)
0 PX SEND BROADCAST :TQ10001 (cr=0 pr=0 pw=0 time=0 us)
4 TABLE ACCESS FULL DIM_AUDIT_CALL (cr=32 pr=31 pw=0 time=35037 us)
0 PX BLOCK ITERATOR PARTITION: 1 16 (cr=0 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL FACT_CALL PARTITION: 1 48 (cr=0 pr=0 pw=0 time=0 us)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 67 0.05 0.95
os thread startup 4 0.21 0.80
PX Deq: Join ACK 4 0.00 0.00
PX Deq: Parse Reply 3 0.13 0.17
SQL*Net message to client 2 0.00 0.00
PX Deq: Execute Reply 304 1.96 511.68
db file scattered read 6 0.01 0.03
PX qref latch 12 0.00 0.00
SQL*Net message from client 2 94.93 94.94
PX Deq: Signal ACK 6 0.10 0.11
enq: PS - contention 1 0.00 0.00
********************************************************************************PX Deq: Execute Reply is an idle event associated with Parallel Query. Are your tables partitioned or have a degree greater then 1?
The tables appear to be small in size. The overhead associated with parallel query generally hinders response time on queries involving small tables. -
Performance problem with sdn_nn - new 10g install
I am having a performance problem with sdn_nn after migrating to a new machine. The old Oracle version was 9.0.1.4. The new is 10g. The new machine is faster in general. Most (non-spatial) batch processes run in half the time. However, the below statement is radically slower. The below statement ran in 45 minutes before. On the new machine it hasn't finished after 10 hours. I am able to get a 5% sample of the customers to finish in 45 minutes.
Does anyone have any ideas on how to approach this problem? Any chance something isn't installed correctly on the new machine (the nth version of the query finishe, albeit 20 times slower)?
Appreciate any help. Thanks.
- Jack
create table nearest_store
as
select /*+ ordered */
a.customer_id,
b.store_id nearest_store,
round(mdsys.sdo_nn_distance(1),4) distance
from customers a,
stores b
where mdsys.sdo_nn(
b.geometry,
a.geometry,
'sdo_num_res=1, unit=mile',
1
) = 'TRUE'
;Dan,
customers 110,000 (involved in this query)
stores 28,000
Here is the execution plan on the current machine:
CREATE TABLE STATEMENT cost = 81947
LOAD AS SELECT
PX COORDINATOR
PX SEND QC (RANDOM) :TQ10000
ROW NESTED LOOPS
1 1 PX BLOCK ITERATOR
1 1ROW TABLE ACCESS FULL CUSTOMERS
1 3 PARTITION RANGE ALL
1 3 TABLE ACCESS BY LOCAL INDEX ROWID STORES
DOMAIN INDEX STORES_SIDX
I can't capture the execution plan on the old database. It is gone. I don't remember it being any different from the above (full scan customers, probe stores index once for each row in customers).
I am trying the query without the create table (just doing a count). I'll let you know on that one.
I am at 10.0.1.3.
Here is how I created the index:
create index stores_sidx
on stores(geometry)
indextype is mdsys.spatial_index LOCAL
Note that the stores table is partitioned by range on store type. There are three store types (each in its own partition). The query returns the nearest store of each type (three rows per customer). This is by design (based on the documented behavior of sdo_nn).
In addition to running the query without the CTAS, I am also going try running it on a different machine tonight. I let you know how that turns out.
The reason I ask about the install, is that the Database Quick Installation Guide for Solaris says this:
"If you intend to use Oracle JVM or Oracle interMedia, you must install the Oracle Database 10g Products installation type from the Companion CD. This installation optimizes the performance of those products on your system."
And, the Database Installlation Guide says:
"If you plan to use Oracle JVM or Oracle interMedia, Oracle strongly recommends that you install the natively compiled Java libraries (NCOMPs) used by those products from the Oracle Database 10g Companion CD. These libraries are required to improve the performance of the products on your platform."
Based on that, I am suspicious that maybe I have the product installed on the new machine, but not correctly (forgot to set fast=true).
Let me know if you think of anything else you'd like to see. Thanks.
- Jack -
Hi all,
We are experiencing an issue that makes no sense to me. We removed 4 drives from ASP2 and moved them to ASP1 two weekends ago. We had some random performance issues along with a seize lock on a journal (for XI). We thought the performance had gotten somewhat better after running the program to turn off dbmon on our 4.7 system. So we set the option to turn dbmon off the next time the system was restarted.
Last weekend we IPL'd to clear the seize lock on the XI Journal. Since then we have noticed that the % busy on one of the 4 drives we added was at 100% and the other 4 were very spikey but often sat at 100% also. They also appeared to have filled up to a higher percent full than the other 132 disks.
We have a pmr open and have set the option to prevent disks writing new data to the disks as recommended. We are also attempting to move the data off of these 4 disks. The move was going somewhat ok until they got to around 50% and now the percent busy is back to 100% on the one disk and only 1% of the data has moved off in the last 8 hours.
Performance has been like a roller coaster since sunday when the IPL took place. We'll move along fine for a few minutes then it's like the system stalls.
We're still going to continue working with IBM but I was wondering if anyone else has experienced anything like this? It goes against my understanding of how the iseries handles disk management. I'd also like to be sure we understand how to prevent this in the future and be able to explain it to our management. So in the unlikely event anyone else has experieinced this please fill me in.
Until it's resolved I'm not even positive that the way the disks are behaving is the problem but it seems like the most likely cause.
We're on V5R4M0 and all of the 136 disks are 70 GB drives.
Thanks,
CraigHello Craig,
I used to adjust the disk configuration only during downtime (restricted mode most of the time), start and Finish the ASP balancing before starting SAP.
I guess - What happened in your situation could be the case that i5/OS put most of the new objects (temporary objects, IFS files, DB pages, etc) on those 4 drives, which made them almost 100% from time to time, and rebalancing just add more requests before releasing the workload...
Typically IBM support on i5/OS is very knowledge and gives good solutions. Besides what you mentioned before, a full system save/restore should automatically balance the disks, from what I remember.
Best regards,
Victor -
I am facing a performance problem with my current application (PL/SQL packaged procedure)
My application takes data from 4 temporary tables, does a lot of validation and
puts them into permanent tables.(updates if present else inserts)
One of the temporary tables is parent table and can have 0 or more rows in
the other tables.
I have analyzed all my tables and indexes and checked all my SQLs
They all seem to be using the indexes correctly.
There are 1.6 million records combined in all 4 tables.
I am using Oracle 8i.
How do I determine what is causing the problem and which part is taking time.
Please help.
The skeleton of the code which we have written looks like this
MAIN LOOP ( 255308 records)-- Parent temporary table
-----lots of validation-----
update permanent_table1
if sql%rowcount = 0 then
insert into permanent_table1
Loop2 (0-5 records)-- child temporary table1
-----lots of validation-----
update permanent_table2
if sql%rowcount = 0 then
insert into permanent_table2
end loop2
Loop3 (0-5 records)-- child temporary table2
-----lots of validation-----
update permanent_table3
if sql%rowcount = 0 then
insert into permanent_table3
end loop3
Loop4 (0-5 records)-- child temporary table3
-----lots of validation-----
update permanent_table4
if sql%rowcount = 0 then
insert into permanent_table4
end loop4
-- COMMIT after every 3000 records
END MAIN LOOP
Thanks
Ashwin N.Do this intead of ditching the PL/SQL.
DECLARE
TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
pnums NumTab;
pnames NameTab;
t1 NUMBER(5);
t2 NUMBER(5);
t3 NUMBER(5);
BEGIN
FOR j IN 1..5000 LOOP -- load index-by tables
pnums(j) := j;
pnames(j) := 'Part No. ' || TO_CHAR(j);
END LOOP;
t1 := dbms_utility.get_time;
FOR i IN 1..5000 LOOP -- use FOR loop
INSERT INTO parts VALUES (pnums(i), pnames(i));
END LOOP;
t2 := dbms_utility.get_time;
FORALL i IN 1..5000 -- use FORALL statement
INSERT INTO parts VALUES (pnums(i), pnames(i));
get_time(t3);
dbms_output.put_line('Execution Time (secs)');
dbms_output.put_line('---------------------');
dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
END;
Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723 -
Performance problem in Zstick report...
Hi Experts,
I am facing performance problem in Custoom Stock report of Material Management.
In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
Is there any way out to increase the performance of this report, the output of the report is in ALV.
May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
Thanks
Rohit GharwarHello,
SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
Yours Sincerely
Dileep -
SQL report performance problem
I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
The summary:
In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695
In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551
What could be the cause of this?
I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
Only the explain plan doesn't show anything.
To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
So, Apex does do something different in the application compared to SQL Workshop.
Edited by: InoL on Aug 5, 2011 4:50 PM -
Performance problem with WPF Viewer CRVS2010
Hi,
We are using Crystal Reports 2010 and the new WPF Viewer. Last week when we set up a test machine to run our integration tests (several hundred) all report tests failed (about 30 tests) with a timeout exception.
The testmachine setup:
HP DL 580 G5
WMWare ESXi 4.0
Guest OS: Windows 7 Enterprise 64-bit
Memory (guest OS): 3GB
CPU: 1
Visual Studio 2010
Crystal Reports for Visual Studio 2010 with 64 bit runtime installed
Visual Studio 2008 installed
Microsoft Office 2010 installed
Macafee antivirus
There are about 10 other virtual machines on the same HW.
I think the performance problem is related to text obejcts on a report document viewed in a WPF Viewer. I made a simple WPF GUI with 2 buttons and the first button executes a very simple report that only has a text object with a few words in it and the other button is also a simple report with only 1 text object with approx. 100 words (about 800 charchters).
The first report executes and displays almost instantly and the second report executes instantantly but displays after approx. 1 min 30 sec.
And execute in this context means that all VB.Net code runs in the compiler without any exception or performance problem. The performance problem seems to come after viewer.Show() (in the code below) has executed.
I did another test on the second report and replaced the text obejct with a formula field with the same text as the text object and this test executed and displayed the report instantly.
So the performance problem seems to have something to do with rendering of textobjects in the WPF Viewer on a virtual machine with the above setup.
I've made several tests on local machines with Windows XP (32 bit) or Winows 7 (64 bit) installed and none of them have this performance problem. Its not a critical issue for us because our users will run this application on their local PCs with Windows 7 64-bit but its a bit problematic for our project not being able to run all of our integration tests but I will probably solve this by using a local PC instead.
Here is the VB.Net code Im using to View the reports:
Private Sub LightWeight_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeight.rpt")
' Initialize Viewer
Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
viewer.Owner = Me
viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
viewer.Show()
End Sub
Private Sub LightWeightSlow_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeightSlow.rpt")
' Initialize Viewer
Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
viewer.Owner = Me
viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
viewer.Show()
End Sub
The reports are 2 empty default reports with only 1 textobject on the details section.
// ThomasSee if the KB [
[1448013 - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
Also the following may not hurt to have a look at (if only for ideas):
[1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
[1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
[1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Hi.
Our reporting component used JRC 1.x before we upgraded to JRC 2.x. We got two issues after upgrading.
First issue I solved already with a workaround which I published on stackoverflow.com. (1) Does anyone knows where I will find the issue management system to report this issue?
Second issue occurs big performance problem within our project. We opened a report with 6 subreports (which includes 1 upto 3 tables) in 2-4 seconds using JRC 1. If we will open same report using JRC 2, we wait upto 60 seconds.
This methods requires more time with JRC 2 comparing to JRC 1:
ReportClientDocument#open(String, int);
SubreportController#setTableLocation(String, ITable, ITable)
DatabaseController#setTableLocation(ITable, ITable)
Each invocation of one of these methods requires 2-4 seconds.
Thank you in advance.
Best regards
Thomas
(1) http://stackoverflow.com/questions/479405/replace-a-database-connection-for-subreports-with-jrchello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
String reportName = "report.rpt";
ReportClientDocument clientDoc = new ReportClientDocument();
clientDoc.open(reportName, 0);
String tableAlias = "Command";
clientDoc.getDatabaseController().setDataSource(myResult("SELECT * FROM table"), tableAlias,tableAlias);
CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
crystalReportPageViewer.processHttpRequest(request, response, application, null);
} catch (ReportSDKExceptionBase e) {
e.printStackTrace();
out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4---- Error code:-2147467259 Error code name:failed
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at org.apache.jsp.No_005f1.Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp._jspService(Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp.java:106)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4
at com.crystaldecisions.reports.queryengine.Connection.bf(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.z3(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.bL(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.zM(Unknown Source)
at com.crystaldecisions.reports.queryengine.Connection.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.try(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
at com.crystaldecisions.reports.datafoundation.DataFoundation.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(Unknown Source)
at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
at com.crystaldecisions.reports.common.Document.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(Unknown Source)
at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
at com.crystaldecisions.reports.common.Document.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
... 39 more
Please help me and tell me why.... -
Performance problem with S873,S691,S679,S716
Hi All,
I am using tables S873,S691,S679,S716 in my report. Since these have huge data its creating performance problem. Right now i am selecting data from tables as Select single.. in Loop.. endloop.
If i try to get it out and use FOR ALL ENTRIES, its taking longer time.
I dont have all keys with me and i m trying to use index whereever possible.
Any hints, comments are really appreciable.
My code goes like this.
This is not a full code... only a part where i am fetching data from 'S' tables.
loop at i_mvke.
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
SELECT SUM( zznslqty ) FROM s691 INTO
w_s691_net_bill_qty WHERE
Use index Z5
matnr EQ i_mvke-matnr AND
spmon EQ w_spmon AND
vrsio EQ p_versn AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr."
SELECT SUM( zznslqty ) SUM( zzninvnum ) FROM s873 INTO
(work01-zznslqty, work01-zzninvnum) WHERE
use index Z02
vkorg EQ i_mvke-vkorg AND
werks EQ p_werks AND
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vrsio EQ p_versn AND
kunnr IN s_kunnr.
SELECT zcrdotov FROM s716 INTO s716-zcrdotov WHERE
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr AND
werks = p_werks AND
vrsio EQ p_versn.
GET THE RECORD TOTAL
ADD 1 TO w_s716_total_count.
GET THE ONTIME TOTAL
IF s716-zcrdotov = 1.
ADD 1 TO w_s716_ontime_count.
ENDIF.
ENDSELECT.
PERFORM fill_output_table.
endloop. "i_mvke
Message was edited by: Agasti Kalehi
good
wrong->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
write->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO CORRESPONDING FIELDS OF TABLE I_MVKE
WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
do the changes accordingly in the below select statements. you have not post the detail report otherwise i could have help you in other select statements also.
thanks
mrutyun -
Performance problem in ABAP code
hai guys,
I created report using tables like bsis,t001 etc,( tax report).
I have performance problem in this report.
COuld you pls tell me how to analyse the report and find out the place where process is taking more memory etc.
i did abap trace and runtime analysis..but could not find out exact point.
how to do this..
i want to analysis each subroutine,internal table and query process.
could you pls give me some ideas.
ambichanThere is an excellent tool available in SAP - <b>Code Inspector.
</b>
Transaction is SCII
Try the following link and I am sure you will find a bunch of useful documents.
<a href="http://www.google.co.in/search?hl=en&safe=off&q=site%3Asdn.sap.comfiletype%3ApdfCode+Inspector&btnG=Search&meta=">ABAP Performance</a>
I use the Code Inspector to search for
a) All the select statements which are present within the loop
b) Nested Loops
c) Select query without providing criteria for primary keys, depending upon situation
d) Can the search be narrowed with extra conditions
e) Using READ .. BINARY SEARCH if internal table has lots of records.
The list is actually endless, but this is something to start with.
You can actually have a checklist, and depending upon it, go through your code. The more you adhere to checklist, you will find that, the performance would dramatically improve.
Also use <b>ST05</b> transaction, for SQL Trace and find out which select query is taking the maximum time for response.
Regards,
Subramanian V. -
Report program Performance problem
Hi All,
one object is taking 30hr for executing.some one develped this in 1998 but this time it is a big Performance problem.please some one helep what to do i am giving that code.
*--DOCUMENTATION--
Programe written by : 31.03.1998 .
Purpose : this programe updates the car status into the table zsdtab1
This programe is to be schedule in the backgroud periodically .
Querries can be fired on the table zsdtab1 to get the details of the
Car .
This programe looks at the changes made in the material master from
last updated date and the new entries in material master and updates
the tables zsdtab1 .
Changes in the Sales Order are not taken into account .
To get a fresh data set the value of zupddate in table ZSTATUS as
01.01.1998 . All the data will be refreshed from that date .
Program Changed on 23/7/2001 after version upgrade 46b by jyoti
Addition of New tables for Ibase
tables used -
tables : mara , " Material master
ausp , " Characteristics table .
zstatus , " Last updated status table .
zsdtab1 , " Central database table to be maintained .
vbap , " Sales order header table .
vbak , " Sales order item table .
kna1 , " Customer master .
vbrk ,
vbrp ,
bkpf ,
bseg ,
mseg ,
mkpf ,
vbpa ,
vbfa ,
t005t . " Country details tabe .
--NEW TABLES ADDEDFOR VERSION 4.6B--
tables : ibsymbol ,ibin , ibinvalues .
data : vatinn like ibsymbol-atinn , vatwrt like ibsymbol-atwrt ,
vatflv like ibsymbol-atflv .
*--types definition--
types : begin of mara_itab_type ,
matnr like mara-matnr ,
cuobf like mara-cuobf ,
end of mara_itab_type ,
begin of ausp_itab_type ,
atinn like ausp-atinn ,
atwrt like ausp-atwrt ,
atflv like ausp-atflv ,
end of ausp_itab_type .
data : mara_itab type mara_itab_type occurs 500 with header line ,
zsdtab1_itab like zsdtab1 occurs 500 with header line ,
ausp_itab type ausp_itab_type occurs 500 with header line ,
last_date type d ,
date type d .
data: length type i.
clear mara_itab . refresh mara_itab .
clear zsdtab1_itab . refresh zsdtab1_itab .
select single zupddate into last_date from zstatus
where programm = 'ZSDDET01' .
select matnr cuobf into (mara_itab-matnr , mara_itab-cuobf) from mara
where mtart eq 'FERT' or mtart = 'ZCBU'.
where MATNR IN MATERIA
and ERSDA IN C_Date
and MTART in M_TYP.
append mara_itab .
endselect .
loop at mara_itab.
clear zsdtab1_itab .
zsdtab1_itab-commno = mara_itab-matnr .
Get the detailed data into internal table ausp_itab .----------->>>
clear ausp_itab . refresh ausp_itab .
--change starts--
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ausp
where objek = mara_itab-matnr .
append ausp_itab .
endselect .
clear ausp_itab .
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ibin as a inner join ibinvalues as b
on ain_recno = bin_recno
inner join ibsymbol as c
on bsymbol_id = csymbol_id
where a~instance = mara_itab-cuobf .
append ausp_itab .
endselect .
----CHANGE ENDS HERE -
sort ausp_itab by atwrt.
loop at ausp_itab .
clear date .
case ausp_itab-atinn .
when '0000000094' .
zsdtab1_itab-model = ausp_itab-atwrt . " model .
when '0000000101' .
zsdtab1_itab-drive = ausp_itab-atwrt . " drive
when '0000000095' .
zsdtab1_itab-converter = ausp_itab-atwrt . "converter
when '0000000096' .
zsdtab1_itab-transmssn = ausp_itab-atwrt . "transmission
when '0000000097' .
zsdtab1_itab-colour = ausp_itab-atwrt . "colour
when '0000000098' .
zsdtab1_itab-ztrim = ausp_itab-atwrt . "trim
when '0000000103' .
*=========Sujit 14-Mar-2006
IF AUSP_ITAB-ATWRT(3) EQ 'WDB' OR AUSP_ITAB-ATWRT(3) EQ 'WDD'
OR AUSP_ITAB-ATWRT(3) EQ 'WDC' OR AUSP_ITAB-ATWRT(3) EQ 'KPD'.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT+3(14).
ELSE.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT . "chassis no
ENDIF.
zsdtab1_itab-chassis_no = ausp_itab-atwrt . "chassis no
*=========14-Mar-2006
when '0000000166' .
----25.05.04
length = strlen( ausp_itab-atwrt ).
if length < 15. "***aded by patil
zsdtab1_itab-engine_no = ausp_itab-atwrt . "ENGINE NO
else.
zsdtab1_itab-engine_no = ausp_itab-atwrt+13(14)."Aded on 21.05.04 patil
endif.
----25.05.04
when '0000000104' .
zsdtab1_itab-body_no = ausp_itab-atwrt . "BODY NO
when '0000000173' . "21.06.98
zsdtab1_itab-cockpit = ausp_itab-atwrt . "COCKPIT NO . "21.06.98
when '0000000102' .
zsdtab1_itab-dest = ausp_itab-atwrt . "destination
when '0000000105' .
zsdtab1_itab-airbag = ausp_itab-atwrt . "AIRBAG
when '0000000110' .
zsdtab1_itab-trailer_no = ausp_itab-atwrt . "TRAILER_NO
when '0000000109' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-fininspdat = date . "FIN INSP DATE
when '0000000108' .
zsdtab1_itab-entrydate = ausp_itab-atwrt . "ENTRY DATE
when '0000000163' .
zsdtab1_itab-regist_no = ausp_itab-atwrt . "REGIST_NO
when '0000000164' .
zsdtab1_itab-mech_key = ausp_itab-atwrt . "MECH_KEY
when '0000000165' .
zsdtab1_itab-side_ab_rt = ausp_itab-atwrt . "SIDE_AB_RT
when '0000000171' .
zsdtab1_itab-side_ab_lt = ausp_itab-atwrt . "SIDE_AB_LT
when '0000000167' .
zsdtab1_itab-elect_key = ausp_itab-atwrt . "ELECT_KEY
when '0000000168' .
zsdtab1_itab-head_lamp = ausp_itab-atwrt . "HEAD_LAMP
when '0000000169' .
zsdtab1_itab-tail_lamp = ausp_itab-atwrt . "TAIL_LAMP
when '0000000170' .
zsdtab1_itab-vac_pump = ausp_itab-atwrt . "VAC_PUMP
when '0000000172' .
zsdtab1_itab-sd_ab_sn_l = ausp_itab-atwrt . "SD_AB_SN_L
when '0000000174' .
zsdtab1_itab-sd_ab_sn_r = ausp_itab-atwrt . "SD_AB_SN_R
when '0000000175' .
zsdtab1_itab-asrhydunit = ausp_itab-atwrt . "ASRHYDUNIT
when '0000000176' .
zsdtab1_itab-gearboxno = ausp_itab-atwrt . "GEARBOXNO
when '0000000177' .
zsdtab1_itab-battery = ausp_itab-atwrt . "BATTERY
when '0000000178' .
zsdtab1_itab-tyretype = ausp_itab-atwrt . "TYRETYPE
when '0000000179' .
zsdtab1_itab-tyremake = ausp_itab-atwrt . "TYREMAKE
when '0000000180' .
zsdtab1_itab-tyresize = ausp_itab-atwrt . "TYRESIZE
when '0000000181' .
zsdtab1_itab-rr_axle_no = ausp_itab-atwrt . "RR_AXLE_NO
when '0000000183' .
zsdtab1_itab-ff_axl_nor = ausp_itab-atwrt . "FF_AXLE_NO_rt
when '0000000182' .
zsdtab1_itab-ff_axl_nol = ausp_itab-atwrt . "FF_AXLE_NO_lt
when '0000000184' .
zsdtab1_itab-drivairbag = ausp_itab-atwrt . "DRIVAIRBAG
when '0000000185' .
zsdtab1_itab-st_box_no = ausp_itab-atwrt . "ST_BOX_NO
when '0000000186' .
zsdtab1_itab-transport = ausp_itab-atwrt . "TRANSPORT
when '0000000106' .
zsdtab1_itab-trackstage = ausp_itab-atwrt . " tracking stage
when '0000000111' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_1 = date . " tracking date for 1.
when '0000000112' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_5 = date . " tracking date for 5.
when '0000000113' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_10 = date . "tracking date for 10
when '0000000114' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_15 = date . "tracking date for 15
when '0000000115' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_20 = date . " tracking date for 20
when '0000000116' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_25 = date . " tracking date for 25
when '0000000117' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_30 = date . "tracking date for 30
when '0000000118' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_35 = date . "tracking date for 35
when '0000000119' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_40 = date . " tracking date for 40
when '0000000120' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_45 = date . " tracking date for 45
when '0000000121' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_50 = date . "tracking date for 50
when '0000000122' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_55 = date . "tracking date for 55
when '0000000123' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_60 = date . " tracking date for 60
when '0000000124' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_65 = date . " tracking date for 65
when '0000000125' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_70 = date . "tracking date for 70
when '0000000126' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_75 = date . "tracking date for 75
when '0000000127' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_78 = date . " tracking date for 78
when '0000000203' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_79 = date . " tracking date for 79
when '0000000128' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_80 = date . " tracking date for 80
when '0000000129' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_85 = date . "tracking date for 85
when '0000000130' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_90 = date . "tracking date for 90
when '0000000131' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_95 = date . "tracking date for 95
when '0000000132' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_100 = date . " tracking date for100
when '0000000133' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_110 = date . " tracking date for110
when '0000000134' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_115 = date . "tracking date for 115
when '0000000135' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_120 = date . "tracking date for 120
when '0000000136' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_105 = date . "tracking date for 105
when '0000000137' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_1 = date . "plan trk date for 1
when '0000000138' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_5 = date . "plan trk date for 5
when '0000000139' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_10 = date . "plan trk date for 10
when '0000000140' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_15 = date . "plan trk date for 15
when '0000000141' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_20 = date . "plan trk date for 20
when '0000000142' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_25 = date . "plan trk date for 25
when '0000000143' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_30 = date . "plan trk date for 30
when '0000000144' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_35 = date . "plan trk date for 35
when '0000000145' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_40 = date . "plan trk date for 40
when '0000000146' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_45 = date . "plan trk date for 45
when '0000000147' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_50 = date . "plan trk date for 50
when '0000000148' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_55 = date . "plan trk date for 55
when '0000000149' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_60 = date . "plan trk date for 60
when '0000000150' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_65 = date . "plan trk date for 65
when '0000000151' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_70 = date . "plan trk date for 70
when '0000000152' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_75 = date . "plan trk date for 75
when '0000000153' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_78 = date . "plan trk date for 78
when '0000000202' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_79 = date . "plan trk date for 79
when '0000000154' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_80 = date . "plan trk date for 80
when '0000000155' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_85 = date . "plan trk date for 85
when '0000000156' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_90 = date . "plan trk date for 90
when '0000000157' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_95 = date . "plan trk date for 95
when '0000000158' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_100 = date . "plan trk date for 100
when '0000000159' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_105 = date . "plan trk date for 105
when '0000000160' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_110 = date . "plan trk date for 110
when '0000000161' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_115 = date . "plan trk date for 115
when '0000000162' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_120 = date . "plan trk date for 120
********Additional fields / 24.05.98**********************************
when '0000000099' .
case ausp_itab-atwrt .
when '540' .
zsdtab1_itab-roll_blind = 'X' .
when '482' .
zsdtab1_itab-ground_clr = 'X' .
when '551' .
zsdtab1_itab-anti_theft = 'X' .
when '882' .
zsdtab1_itab-anti_tow = 'X' .
when '656' .
zsdtab1_itab-alloy_whel = 'X' .
when '265' .
zsdtab1_itab-del_class = 'X' .
when '280' .
zsdtab1_itab-str_wheel = 'X' .
when 'CDC' .
zsdtab1_itab-cd_changer = 'X' .
when '205' .
zsdtab1_itab-manual_eng = 'X' .
when '273' .
zsdtab1_itab-conn_handy = 'X' .
when '343' .
zsdtab1_itab-aircleaner = 'X' .
when '481' .
zsdtab1_itab-metal_sump = 'X' .
when '533' .
zsdtab1_itab-speaker = 'X' .
when '570' .
zsdtab1_itab-arm_rest = 'X' .
when '580' .
zsdtab1_itab-aircond = 'X' .
when '611' .
zsdtab1_itab-exit_light = 'X' .
when '613' .
zsdtab1_itab-headlamp = 'X' .
when '877' .
zsdtab1_itab-readlamp = 'X' .
when '808' .
zsdtab1_itab-code_ckd = 'X' .
when '708' .
zsdtab1_itab-del_prt_lc = 'X' .
when '593' .
zsdtab1_itab-ins_glass = 'X' .
when '955' .
zsdtab1_itab-zelcl = 'Elegance' .
when '593' .
zsdtab1_itab-zelcl = 'Classic' .
endcase .
endcase .
endloop .
*--Update the sales data .--
perform get_sales_order using mara_itab-matnr .
perform get_cartype using mara_itab-matnr .
append zsdtab1_itab .
endloop.
<<<
loop at zsdtab1_itab .
if zsdtab1_itab-cartype <> 'W-203'
or zsdtab1_itab-cartype <> 'W-210'
or zsdtab1_itab-cartype <> 'W-211'.
clear zsdtab1_itab-zelcl.
endif.
SELECT SINGLE * FROM ZSDTAB1 WHERE COMMNO = MARA_ITAB-MATNR .
select single * from zsdtab1 where commno = zsdtab1_itab-commno.
if sy-subrc <> 0 .
insert into zsdtab1 values zsdtab1_itab .
else .
update zsdtab1 set :vbeln = zsdtab1_itab-vbeln
bill_doc = zsdtab1_itab-bill_doc
dest = zsdtab1_itab-dest
lgort = zsdtab1_itab-lgort
ship_tp = zsdtab1_itab-ship_tp
country = zsdtab1_itab-country
kunnr = zsdtab1_itab-kunnr
vkbur = zsdtab1_itab-vkbur
customer = zsdtab1_itab-customer
city = zsdtab1_itab-city
region = zsdtab1_itab-region
model = zsdtab1_itab-model
drive = zsdtab1_itab-drive
converter = zsdtab1_itab-converter
transmssn = zsdtab1_itab-transmssn
colour = zsdtab1_itab-colour
ztrim = zsdtab1_itab-ztrim
commno = zsdtab1_itab-commno
trackstage = zsdtab1_itab-trackstage
chassis_no = zsdtab1_itab-chassis_no
engine_no = zsdtab1_itab-engine_no
body_no = zsdtab1_itab-body_no
cockpit = zsdtab1_itab-cockpit
airbag = zsdtab1_itab-airbag
trailer_no = zsdtab1_itab-trailer_no
fininspdat = zsdtab1_itab-fininspdat
entrydate = zsdtab1_itab-entrydate
regist_no = zsdtab1_itab-regist_no
mech_key = zsdtab1_itab-mech_key
side_ab_rt = zsdtab1_itab-side_ab_rt
side_ab_lt = zsdtab1_itab-side_ab_lt
elect_key = zsdtab1_itab-elect_key
head_lamp = zsdtab1_itab-head_lamp
tail_lamp = zsdtab1_itab-tail_lamp
vac_pump = zsdtab1_itab-vac_pump
sd_ab_sn_l = zsdtab1_itab-sd_ab_sn_l
sd_ab_sn_r = zsdtab1_itab-sd_ab_sn_r
asrhydunit = zsdtab1_itab-asrhydunit
gearboxno = zsdtab1_itab-gearboxno
battery = zsdtab1_itab-battery
tyretype = zsdtab1_itab-tyretype
tyremake = zsdtab1_itab-tyremake
tyresize = zsdtab1_itab-tyresize
rr_axle_no = zsdtab1_itab-rr_axle_no
ff_axl_nor = zsdtab1_itab-ff_axl_nor
ff_axl_nol = zsdtab1_itab-ff_axl_nol
drivairbag = zsdtab1_itab-drivairbag
st_box_no = zsdtab1_itab-st_box_no
transport = zsdtab1_itab-transport
OPTIONS-
roll_blind = zsdtab1_itab-roll_blind
ground_clr = zsdtab1_itab-ground_clr
anti_theft = zsdtab1_itab-anti_theft
anti_tow = zsdtab1_itab-anti_tow
alloy_whel = zsdtab1_itab-alloy_whel
del_class = zsdtab1_itab-del_class
str_wheel = zsdtab1_itab-str_wheel
cd_changer = zsdtab1_itab-cd_changer
manual_eng = zsdtab1_itab-manual_eng
conn_handy = zsdtab1_itab-conn_handy
aircleaner = zsdtab1_itab-aircleaner
metal_sump = zsdtab1_itab-metal_sump
speaker = zsdtab1_itab-speaker
arm_rest = zsdtab1_itab-arm_rest
aircond = zsdtab1_itab-aircond
exit_light = zsdtab1_itab-exit_light
headlamp = zsdtab1_itab-headlamp
readlamp = zsdtab1_itab-readlamp
code_ckd = zsdtab1_itab-code_ckd
del_prt_lc = zsdtab1_itab-del_prt_lc
ins_glass = zsdtab1_itab-ins_glass
dat_trk_1 = zsdtab1_itab-dat_trk_1
dat_trk_5 = zsdtab1_itab-dat_trk_5
dat_trk_10 = zsdtab1_itab-dat_trk_10
dat_trk_15 = zsdtab1_itab-dat_trk_15
dat_trk_20 = zsdtab1_itab-dat_trk_20
dat_trk_25 = zsdtab1_itab-dat_trk_25
dat_trk_30 = zsdtab1_itab-dat_trk_30
dat_trk_35 = zsdtab1_itab-dat_trk_35
dat_trk_40 = zsdtab1_itab-dat_trk_40
dat_trk_45 = zsdtab1_itab-dat_trk_45
dat_trk_50 = zsdtab1_itab-dat_trk_50
dat_trk_55 = zsdtab1_itab-dat_trk_55
dat_trk_60 = zsdtab1_itab-dat_trk_60
dat_trk_65 = zsdtab1_itab-dat_trk_65
dat_trk_70 = zsdtab1_itab-dat_trk_70
dat_trk_75 = zsdtab1_itab-dat_trk_75
dat_trk_78 = zsdtab1_itab-dat_trk_78
dat_trk_79 = zsdtab1_itab-dat_trk_79
dat_trk_80 = zsdtab1_itab-dat_trk_80
dat_trk_85 = zsdtab1_itab-dat_trk_85
dat_trk_90 = zsdtab1_itab-dat_trk_90
dat_trk_95 = zsdtab1_itab-dat_trk_95
dattrk_100 = zsdtab1_itab-dattrk_100
dattrk_105 = zsdtab1_itab-dattrk_105
dattrk_110 = zsdtab1_itab-dattrk_110
dattrk_115 = zsdtab1_itab-dattrk_115
dattrk_120 = zsdtab1_itab-dattrk_120
pdt_tk_1 = zsdtab1_itab-pdt_tk_1
pdt_tk_5 = zsdtab1_itab-pdt_tk_5
pdt_tk_10 = zsdtab1_itab-pdt_tk_10
pdt_tk_15 = zsdtab1_itab-pdt_tk_15
pdt_tk_20 = zsdtab1_itab-pdt_tk_20
pdt_tk_25 = zsdtab1_itab-pdt_tk_25
pdt_tk_30 = zsdtab1_itab-pdt_tk_30
pdt_tk_35 = zsdtab1_itab-pdt_tk_35
pdt_tk_40 = zsdtab1_itab-pdt_tk_40
pdt_tk_45 = zsdtab1_itab-pdt_tk_45
pdt_tk_50 = zsdtab1_itab-pdt_tk_50
pdt_tk_55 = zsdtab1_itab-pdt_tk_55
pdt_tk_60 = zsdtab1_itab-pdt_tk_60
pdt_tk_65 = zsdtab1_itab-pdt_tk_65
pdt_tk_70 = zsdtab1_itab-pdt_tk_70
pdt_tk_75 = zsdtab1_itab-pdt_tk_75
pdt_tk_78 = zsdtab1_itab-pdt_tk_78
pdt_tk_79 = zsdtab1_itab-pdt_tk_79
pdt_tk_80 = zsdtab1_itab-pdt_tk_80
pdt_tk_85 = zsdtab1_itab-pdt_tk_85
pdt_tk_90 = zsdtab1_itab-pdt_tk_90
pdt_tk_95 = zsdtab1_itab-pdt_tk_95
pdt_tk_100 = zsdtab1_itab-pdt_tk_100
pdt_tk_105 = zsdtab1_itab-pdt_tk_105
pdt_tk_110 = zsdtab1_itab-pdt_tk_110
pdt_tk_115 = zsdtab1_itab-pdt_tk_115
pdt_tk_120 = zsdtab1_itab-pdt_tk_120
cartype = zsdtab1_itab-cartype
zelcl = zsdtab1_itab-zelcl
excise_no = zsdtab1_itab-excise_no
where commno = zsdtab1_itab-commno .
Update table .---------<<<
endif .
endloop .
perform update_excise_date .
perform update_post_goods_issue_date .
perform update_time.
*///////////////////// end of programe /////////////////////////////////
Get sales data -
form get_sales_order using matnr .
data : corr_vbeln like vbrk-vbeln .
ADDED BY ADITYA / 22.06.98 **************************************
perform get_order using matnr .
select single vbeln lgort into (zsdtab1_itab-vbeln , zsdtab1_itab-lgort)
from vbap where matnr = matnr . " C-22.06.98
from vbap where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
************Get the Excise No from Allocation Field*******************
select single * from zsdtab1 where commno = matnr .
if zsdtab1-excise_no = '' .
select * from vbrp where matnr = matnr .
select single vbeln into corr_vbeln from vbrk where
vbeln = vbrp-vbeln and vbtyp = 'M'.
if sy-subrc eq 0.
select single * from vbrk where vbtyp = 'N'
and sfakn = corr_vbeln. "cancelled doc.
if sy-subrc ne 0.
select single * from vbrk where vbeln = corr_vbeln.
if sy-subrc eq 0.
data : year(4) .
move sy-datum+0(4) to year .
select single * from bkpf where awtyp = 'VBRK' and awkey = vbrk-vbeln
and bukrs = 'MBIL' and gjahr = year .
if sy-subrc = 0 .
select single * from bseg where bukrs = 'MBIL' and belnr = bkpf-belnr
and gjahr = year and koart = 'D' and
shkzg = 'S' .
zsdtab1_itab-excise_no = bseg-zuonr .
endif .
endif.
endif.
endif.
endselect.
endif .
select single kunnr vkbur into (zsdtab1_itab-kunnr ,
zsdtab1_itab-vkbur) from vbak
where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
select single name1 ort01 regio into (zsdtab1_itab-customer ,
zsdtab1_itab-city , zsdtab1_itab-region) from kna1
where kunnr = zsdtab1_itab-kunnr .
endif.
Get Ship to Party **************************************************
select single * from vbpa where vbeln = zsdtab1_itab-vbeln and
parvw = 'WE' .
if sy-subrc = 0 .
zsdtab1_itab-ship_tp = vbpa-kunnr .
Get Destination Country of Ship to Party .************
select single * from kna1 where kunnr = vbpa-kunnr .
if sy-subrc = 0 .
select single * from t005t where land1 = kna1-land1
and spras = 'E' .
if sy-subrc = 0 .
zsdtab1_itab-country = t005t-landx .
endif .
endif .
endif .
endif .
endform. " GET_SALES
form update_time.
update zstatus set zupddate = sy-datum
uzeit = sy-uzeit
where programm = 'ZSDDET01' .
endform. " UPDATE_TIME
*& Form DATE_CONVERT
form date_convert using atflv changing date .
data : dt(8) , dat type i .
dat = atflv .
dt = dat .
date = dt .
endform. " DATE_CONVERT
*& Form UPDATE_POST_GOODS_ISSUE_DATE
form update_post_goods_issue_date .
types : begin of itab1_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab1_type .
data : itab1 type itab1_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-postdate = '00000000' .
refresh itab1 . clear itab1 .
select * from mseg where matnr = mara_itab-matnr and bwart = '601' .
itab1-mblnr = mseg-mblnr .
append itab1 .
endselect .
loop at itab1 .
select single * from mkpf where mblnr = itab1-mblnr .
if sy-subrc = 0 .
itab1-budat = mkpf-budat .
modify itab1 .
endif .
endloop .
sort itab1 by budat .
read table itab1 index 1 .
if sy-subrc = 0 .
update zsdtab1 set postdate = itab1-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_POST_GOODS_ISSUE_DATE
*& Form UPDATE_EXCISE_DATE
form update_excise_date.
types : begin of itab2_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab2_type .
data : itab2 type itab2_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-excise_dat = '00000000' .
refresh itab2 . clear itab2 .
select * from mseg where matnr = mara_itab-matnr and
( bwart = '601' or bwart = '311' ) .
itab2-mblnr = mseg-mblnr .
append itab2 .
endselect .
loop at itab2 .
select single * from mkpf where mblnr = itab2-mblnr .
if sy-subrc = 0 .
itab2-budat = mkpf-budat .
modify itab2 .
endif .
endloop .
sort itab2 by budat .
read table itab2 index 1 .
if sy-subrc = 0 .
update zsdtab1 set excise_dat = itab2-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_EXCISE_DATE
form get_order using matnr .
types : begin of itab_type ,
vbeln like vbap-vbeln ,
posnr like vbap-posnr ,
end of itab_type .
data : itab type itab_type occurs 10 with header line .
refresh itab . clear itab .
select * from vbap where matnr = mara_itab-matnr .
itab-vbeln = vbap-vbeln .
itab-posnr = vbap-posnr .
append itab .
endselect .
loop at itab .
select single * from vbak where vbeln = itab-vbeln .
if vbak-vbtyp <> 'C' .
delete itab .
endif .
endloop .
loop at itab .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'H' .
if sy-subrc = 0 .
delete itab .
endif .
endloop .
clear : zsdtab1_itab-vbeln , zsdtab1_itab-bill_doc .
loop at itab .
zsdtab1_itab-vbeln = itab-vbeln .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'M' .
if sy-subrc = 0 .
zsdtab1_itab-bill_doc = vbfa-vbeln .
endif .
endloop .
endform .
*& Form GET_CARTYPE
form get_cartype using matnr .
select single * from mara where matnr = matnr .
zsdtab1_itab-cartype = mara-satnr .
endform. " GET_CARTYPEHi,
I have analysed your program and i would like to share following points for better performance of this report :
(a) Use the field Names instead of Select * or Select Single * as if you use the field names it will consume less amount of resources inside the loop as well as you have lot many Select Single * and u r using very big tables like VBAP and many more.
(b) Trace on ST05 which particular query is mostly effecting your system or use ST12 in current mode to trace for less inputs which run the report for 20-30 min so that we get an idea which queries are effecting the system and taking a lot of time.
(c) In Case of internal tables sort the data properly and use binary search for getting the data.
I think this will help.
Thanks and Regards,
Harsh -
Report painter performance problem...
I have a client which runs a report group consists of 14 reports... When we run this program... It takes about 20 minutes to get results... I was assigned to optimize this report...
This is what I've done so far
(this is a SAP generated program)...
1. I've checked the tables that the program are using... (a customized table with more than 20,000 entries and many others)
2. I've created secondary indexes to the main customized table with (20,000) entries - It improves the performance a bit(results about 18 minutes)...
3. I divided the report group by 4... 3 reports each report group... It greatly improves the performance... (but this is not what the client wants)...
4. I've read an article about report group performance that it is a bug.
(sap support recognized the fact that we are dealing with a bug in the sap standard functionality)
http://it.toolbox.com/blogs/sap-on-db2/sap-report-painter-performance-problem-26000
Anyone have the same problem as mine?
Edited by: christopher mancuyas on Sep 8, 2008 9:32 AM
Edited by: christopher mancuyas on Sep 9, 2008 5:39 AMReport painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
Amit.
Maybe you are looking for
-
10.9.1: Mail 7.1 screws up Print layout / formatting
Mail 7.1 in Mac OS X 10.9.1 screws up the layout of Messages you try to Print. The two most common symptoms are that: 1) Blank space is inserted after the Headers and before the first line of the body of the message, so that the body of the message
-
Do I need a power converter to use my US based iPhone5 in the U.K.?
Do I need a power converter to charge my US based iPhone5 in the U.K.?
-
Purchase order Document date in AP Downpayment invoice PLD
Dear All, Is it possible to capture purchase order Document Date in AP Down payment invoice PLD.My client want like this.I have tried,but i am not able to capture this field in AP Down payment invoice PLD.please give me the solution for this,If it is
-
How can I sync ff bookmarks on old XP with bookmarks on new Win7?
Running FF32 on both devices. Properly logged on to both. Would like to know how to get bookmarks from device running on XT to newer one running Win 7. Carefully read instructions and looked at solutions to similar problems. Nothing has worked. Thank
-
HT4236 itunes menu no photo sync
The PHOTO label un the sync menu in iTunes doesn´t appear any more, what happened? I want to sync new photos to my iminiIpad and can´t find the way to do it, can someone help. THX Jorge