Random problem with no ring tone or message alert.

I have a one week old iPhone 6 with iOS 8.1.2. Sometimes calls and messages produce no sound. In the case of calls, they kick over to voice mail after just one ring. This situation is intermittent only. After missing a few calls or messages, everything turns back to normal for a while. Then it comes back.

Use Do Not Disturb on your iPhone, iPad, or iPod touch - Apple Support

Similar Messages

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

N8 / Belle / Car BT Audio - random problem with au...

I updated my N8 to Belle when it was first released. Ever since, I've been experiencing random problems with audio volume and how it is being output from the phone.
I have paired my N8 with my car (2012 Subaru Legacy) which allows me to make phone calls via the car and stream music to the car via BT from the N8. Everything works fine most of the time, but there are some anomalies.
For example: In the morning on way to work, I used Music Player to listen to songs in the car. Later on during lunch break, I made two phone calls from the car.
After work, I turned on Music Player and started listening to songs, but realized that the audio is being played from N8's loudspeaker, and not the car speakers, even though the phone was paired with car BT.
I restarted the application but nothing changed. I then turned-off BT on phone, turned it on again, and this time the audio was still output via the loudspeaker, but I could now see the song details on the car stereo display and skip to next song using car controls.
Another example: I've also noticed that sometimes after using BT Audio in car, when I later play songs, the volume coming from N8's loudspeaker is maybe at 20% of what it should be and the volume buttons have to control over it. It seems almost as if the phone still thinks it is connected to car and is letting the car stereo do the amplification.
I tried different settings, but I can't pinpoint any specific cause of this behavior.
Has anyone experienced the same? Solutions?

For the song details to appear on the screen of car stereo you have to make sure your .MP3s have the ID3 info stored in them. You can do that with programs like Winamp/MediaMonkey/others. But I found that only works in my car when it wants to; it is never consistent, and most of the time it doesn't work. I blame the phone software for that.
As far as sound quality with my BT Audio I couldn't ask for better. It is very clear. I have most of my MP3s encoded at 192Kbps; I found the lower rates not to be very clear. I have not tested FM Transmitter in the Subaru (because BT works so good), but in my previous car it did not work well at all. It would only work in one spot (under dash in the foot area) and even then it wasn't very clear.

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please help

Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

How do I use a voice memo as a ring tone or an alert tone?

How do I use a voice memo as a ring tone or an alert tone?

Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
In iTunes the recorded voice is listed under Music as some_numbers.m4a.
Right click on the item and choose Create AAC version.
Drag the converted voice onto the desktop.
Delete the voice copy in iTunes. (important step)
On desktop, rename the some_number.m4a to something_more_intelligent.m4r
Drag it back to iTunes and you will find it under Tones.
Now select it (for sync) and connect your iPhone, do a sync.
If everything works out, it will be in Settings > Sounds > Ringtone.
Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
Hope this helps.

Different alerts for email and sms messages for a contact with custom ring tone

Hello,
I have a Curve 8530 with OS 5.0.0.395.
I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
Thanks.

Hello,
Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

N97 v2.0 Gallery problems and missing ringing tone...

Hi!
I had removed all of my photos an mp3 files from my phone before I updated it to v20.
Now I'm facing two problems:
1st:
It still shows me lots of photos in the gallery (which have been deleted from memory), unfortunately, I can't delete them there. And i can't force the gallery to refresh those items.How do I get them out of there? It's freaking me out to have more than 100 items in the gallery, which aren't there any more.
2nd:
I separated my contacts into four different groups. I'd like everyone of them to have a ringing tone of their own. So I copied four mp3 files to the internal mass memory. Unfortunately, two of the files appear only in the music player (which can play them without problems), but I can't choose them, when I'm in the contact group settings. Any ideas?
Greets,
patrese
6110-->8210-->6510-->6230-->6288-->N95-->N97-->E7

I updated to Firmware V2.0. It all seemed to go well and the N97 seemed to be fine afterwards (all the applications worked, etc.) It wasn't until I made a call that I realised there was a problem. I could no longer make or receive calls! If I dialled any number (from Contacts or using the Dialler) the phone said 'Not Allowed.' I tried reloading the firmware but it didn't cure the problem. Texting worked fine. I tried Restoring Factory Settings, a Soft Reset and then a Hard Reset but on all attempts the phone said 'End All Active Calls and Connections First.'
Same problem as you I think. Here's how I solved the problem:
Hard Reset *#7370# (it didn't work straight away as each time I tried I got the message 'End All active calls and Connections First'. This can be cured by removing all widgets from the Home Screen.
Having completed a Hard Reset I checked the firmware version on my phone *#0000# and found V2.0 was still installed.
I then restored my data to the phone from my Backup using Ovi Suite. Unfortunately this left me back at square one - unable to make or receive calls! The trick is not to restore everything.
Repeat the steps above until restoring from Backup. Check all items except 'device settings and applications' and carry out restore.
I did that and my phone is working perfectly. I have had to manually re-install my applications but everything is working fine.
Give it a try. Good luck!

Problem with attaching files to mail message

Hello,
I have problem with my mail app. I'm using spaces for better organization. When I wanna add some file to mail message I usually go to different desktop (space), where I have the file I wanna attach. I grab it move to right up corner to activate spaces, than move to desktop (space) with mail.app and press spacebar (it activates the desktop immediately). At that time it also start random app, which is in my dock.
You can see it in my youtube video.
How can avoid this strange thing happen?
http://www.youtube.com/watch?v=KUypUnPHZvc
I'm using MacBook Pro 15'', Snow Leopard - latest updates. I've reinstalled my mac two days ago, so no garbage should be in.

Thanks for quick reply.
I don't have selected "always..." so I also tried it with selected "always...".
Now I discovered that it has nothing to do with the mail. I've tried just move some file from one of spaces (desktop) to another using the spacebar for faster switching and it did the same. It opens random app from Dock.
So now this topic is in wrong discussion. I will post it to correct discussion...

HT4623 is anyone else having problems with receiving and sending text messages. most people in my contacts are not getting messages that i send to them.

is anyone else experiencing problems with (SMS) text messaging. Most all of my daily contacts dont receive my messages.

Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I am having a problem with email, when I delete messages from my Ipad, they come back into trash whether they are on my PC or not. The only way I can delete them is to to my providers site and delete everything there.

I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.

For IMAP mail only.
Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

Random problem with no ring tone or message alert.

Similar Messages

Maybe you are looking for