Random reboots K8T Neo2 and 3200+

I am still getting the random reboots. I have noticed the most reboots when having alot of windows open in my web browser, both firefox and maxthon. I have done full virus scan and run both adaware and spybot with no change. Right now I am using 1 windows with my browser and no problem. I can also play games that have high system requirements, AAO and BF2 neither causes any problems. Anyone have a answer or clue to what is happening? Core center says my cpu temp is running what I call wide 37-51 degrees. The fan speed changes alot also. Is there a way to lock the fan speed and still use core center? I don't remeber but think my Intel and 865PE Neo2 setup the fan speed stayed constant.
Thanks
Mickey

Bios  3.3
Cpuz info
CPU-Z Report
CPU-Z version 1.29.
CPU(s)   
Number of CPUs   1
Name   AMD Athlon 64 3200+
Code Name   Winchester
Specification   AMD Athlon(tm) 64 Processor 3200+
Family / Model / Stepping   F F 0
Extended Family / Model   F 1F
Brand ID   4
Package   Socket 939
Core Stepping   DH8-D0
Technology   0.09 µ
Supported Instructions Sets   MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2, x86-64
CPU Clock Speed   2000.1 MHz
Clock multiplier   x 10.0
HTT Bus Frequency   200.0 MHz
L1 Data Cache   64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache   64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache   512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed   2000.1 MHz (Full)
L2 Location   On Chip
L2 Data Prefetch Logic   yes
L2 Bus Width   128 bits
Mainboard and chipset   
Motherboard manufacturer   MSI
Motherboard model   MS-6702E, 1.0
BIOS vendor   American Megatrends Inc.
BIOS revision   Version 07.00T
BIOS release date   04/02/01
Chipset   VIA K8T800 Pro rev. 00
Southbridge   VIA VT8237 rev. 00
Sensor chip   Winbond W83627THF
Graphic Interface   AGP
AGP Status   enabled, rev. 3.0
AGP Data Transfer Rate   8x
AGP Max Rate   8x
AGP Side Band Addressing   supported, enabled
AGP Aperture Size   128 MBytes
Memory   
DRAM Type   DDR-SDRAM
DRAM Size   512 MBytes
DRAM Frequency   200.0 MHz
FSB:DRAM   CPU/10
CAS# Latency   2.5 clocks
RAS# to CAS#   3 clocks
RAS# Precharge   3 clocks
Cycle Time (TRAS)   7 clocks
Bank Cycle Time (TRC)   11 clocks
DRAM Idle Timer   16 clocks
# of memory modules   2
Module 0   Kingston DDR-SDRAM PC3500 - 256 MBytes
Module 1   Kingston DDR-SDRAM PC3500 - 256 MBytes
Software   
Windows version   Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX version   9.0c
Cell menu
Dram clock                  manual
Memory clock              DDR400
Cas latency                 2.5
Burst length               8Beat
Bank interleaving         Auto
Trcd                          3clk
Tras                           7clk
Trp                            3clk
Dram 1 timing              enabled
High performance mode     manual
cool n quiet                 disabled
HT frequency               1000mhz
Dynamic overclocking     disabled
Adjust cpu ratio            auto
Adjust fsb frequency     200mhz
Agp frequency             By default
HT voltage                  auto
memory voltage           2.6
Cpu voltage                  auto
Agp voltage                 auto
Spread spectrum          enabled
Curently using the 4n1 453 drivers  Had used newest version 500a from viaarena
Clean install again today currently using ati 5.2 video driver have used newest 5.7 and 5.8 when I had the newest via chipset drivers installed.
 

Similar Messages

  • K8T Neo2 and Promise FastTrak 579

    Hi,
    I have K8T Neo2 and AMD Athlon 64 3200+, rest is not important.
    By my procesor I must upgrade Bios to new version (3.2).
    After reboot I see row with choice: DEL - to Bios, F2 - load RAID bios, ......
    I go to  mainboard bios to load default. After reboot when is looking for HDD its shown, than on SATA 237 isn't HDD (it is true)
           on FAstTrak 579  is not bios!
    How I can install bios for FastTrak 579 controller?
    sorry for easy question, but I can't information about it.
    Thank for answer.
    Petr

    Hi,
    thanks.
    One idea goes by my head:
    Why when I firstly turn on (when I completed PC or after I upgrade motherboard bios) it show to me row: Press DEL to bios
                                                F2 to load bios (I mean than it is for Promise 579)
                                                F11 to ....
    and when I press F2 something runs and pass
    and after this how I restart PC after POST after detection HDD on Promise 579 it write only than HDD is not connected.
     Message BIOS NOT INSTALLED was not shown.
    When I upgrade bios I push DEL and I go to motherboard's setup and firstly I not push F2. By this I mean, than bios Promise 579 is not.
    When I push TAB when Power On I can go to BIOS VT8237
    When I push CTRL+F (it's go to bios Promise 579) - nothing reaction

  • [Athlon64] msi k8t neo2 and media center 2005

    installing mce 2005 and via driver 5.04A video doesn't display video on media center screen
    my configration is
    msi k8t neo2-f
    nvidia 5200fx
    2x 512mb  dual ram
    2x wintv pvr mce 150
    300 gb maxtor sata

    Quote
    video doesn't display video on media center screen
    what nvidia drivers are you using here? need 53.04 or later for MCE support
    does any video play, Live TV, DVD, other video? make sure you have a compatible MPEG2/DVD decoder installed (PowerDVD 6+, WinDVD 6+, Nvidia PureVideo Decoder etc)

  • Ratio only 10x with Neo2 and 3200+

    Heelp !
    I have a Winchester 3200+ with Neo2 board and the max CPU ratio value is 10 !
    Just upgraded from Bios 1.3 to Bios 1.36, with no prob, but the ratio problem persists ...
    please help,
    thx

    Isn't that the correct value? I have a 3000 and my max ratio is 9  
    10 x 200 = 2Ghz = 3200 PR rating

  • K8T Neo2 crashing and memory issues

    I bought myself a new PC in late december and have started experiencing some problems with it
    Brief system specs:
    MSI K8T Neo2
    Athlon64 3200
    512Mb Samsung PC3200 DDR400
    ATI All in wonder radeon 9800 pro
    LG DVD writer
    Windows XP SP-1
    Antec SLK3700BQE case, which came with what I think is an Antec smartpower SL350 PSU
    I had two sticks of memory (both the same type), but one of the sticks failed memtest badly so I sent it back and got a working replacement.  Both sticks would pass lengthy bouts of memtest on their own, but would fail occasionally if I put both in (It didn't seem to matter if it was in a DDR configuration or not, but I didn't test non DDR pairings as much).  I tried turning down the ram speed in the bios, but it didn't seem to help.  Any advice on getting this to work would be great.
    A much more serious problem I'm having is crashing - The system will ocassionally shut itself down leaving the monitor without a signal.  Sometimes I can reset the system, others I have to switch off the power before the system will respond at all again.  In the past there was sometimes graphical corruption before the failure, although lately it has just been a black screen.  This happens most frequently when working with games using 3D graphics, although infrequently will happen when web browsing.  The crashing seems to have become more frequent lately, particularly since a local heat wave.  The problem may have become more pronounced when I bought the DVD writer to replace a very old CD-ROM, although its hard to judge because I replaced the bad memory stick at the same time.
    According to core center the temperatures seem to run under 50 degrees, but the 12V volatage is listed at only 11.12 to 11.18.  Is my PSU the culprit here, or are these symptoms of a different problem?

    Your PSU could well be the cause. Can you post its amps at 3,3v / 5v / 12v here? Antec PSU's usually do not have high efficiency (most likely 60-70%), so if the amps are already low and efficiency is too, my guess would be your PSU. It could seriously damage your board, cpu or vid card by the way...
    Try solving the mem problem by raising the Vmem by 0.05v or by raising the latencies some (or both)....

  • Random reboots with 975x Platinum v2.1?

    As the title says, I have the MSI 975x Platinum v2.1. The system randomly reboots fairly, often, and I'm not sure what could be causing it.
    I had this setup for a few weeks, before it locked up overnight and destroyed my memory. Board would halt on the memory initialization during POST, so I sent it back for RMA and now have the replacement. While waiting for the RMA, I bought some memory from a local retailer so I would have something to use. The system would randomly reboot, sometimes in Windows, sometimes while browsing the BIOS menus. I figured the motherboard was damaged too and I sent it back to the retailer for a RMA replacement. I now have the LE version of the board. I also bought a new power supply because I now thought it fried my stuff. Everything put back together, I'm still having random reboots. Here's the system specs:
    # Intel Core 2 EE x6800
    # MSI 975x Platinum v2.1 LE (BIOS 7.4 official)
    # mushkin REDLINE 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1000
    # BFG Tech BFGR79256GTOCE GeForce 7900GT 256MB GDDR3
    # 1x NEC IDE DVDR, 1x Seagate 200GiB IDE, 1x Seagate 80GiB SATA2, 1x Seagate 400GiB SATA1, 1x Seagate 500GiB SATA2
    # Windows XP Pro SP2
    # Tagan TG-480-U22 ATX 480W, then mushkin HP-580AP ATX12V / EPS12V 580W
    Currently, the system can play games for a couple hours with dnetc running in the background. Yet when I leave it running a torrent (or whatever) overnight, I'll wake up and find it rebooted (after like 6 hours of uptime).  I've also gotten it to reboot while just browsing web pages for a few minutes. The northbridge heatsink/heatpipe does get pretty hot, and my room does get warm, so I'll try adding a spare fan tonight. Though, I find this unlikely as the system should be working fine at stock speeds/voltages. Other than that, anyone have any suggestions?

    I was actually using the Tagan in combined mode until I started having problems (ie, when the RAM died). By then, neither combined nor split appeared to have any helpful effect. I do not know if the Tagan was the cause of my problems, or if this is all something (???) else. I suppose I could try it again, but I'd rather not break my newly RMA'ed stuff. The mushkin power supply has 4x 20a 12v rails, but it appears to automatically determine whether they should be combined or split.
    Speaking of the 12v rails. I noticed that the BIOS reports varying values for the 12v. I've seen it at 12.3v, 13.0v, 13.7v, and 14.0v. However, the dualcorecenter software in Windows always reports 12.2v - 12.3v. I have no idea which is accurate.

  • K8T NEO2 BIOS 9.4 CPU support question

    hi i whas wondering if i upgraded to the newest bios version 9.4 if it would still support my athlon 64 3000+ winchester core?.i need to flash to a newer bios in a attempt to fix the dual channel support on the mb.i currently have bios 3.30.could i also switch to a older version for the dual channel to work?.

    hi glitch; i had the same dual channel problem...i also have the same board (the k8t neo2) and it is a winchester.  you are not supposed to flash to bios 9.4 with a winchester.  make 100% sure that you actually do have version 3.3 bios...because that is what fixed the dual channel problem for me.  I thought I had bios 3.3 because that's what my startup screen said...but the 3.3 was actually something completely different...wasn't even the bios version.  It took me forever to realize I actually had version 3.0.  Once I updated to version 3.3 the dual channel worked great!

  • Kingston HyperX 2x 512MB + MSI K8T Neo2 + 3200 Winchester = SERIOUS ISSUE

    OK, so thats the spec:
    Microstar K8T Neo2
    Kingston HyperX DDR 2x 512MB PC-400 (KHX3200ULK2/1G) CL2 (producer's timings : 2-2-2-5-1)
    AMD 64 3200 Winchester core CPU
    And here's the problem, watch out - its gonna get real wierd from now on :D
    First setup: Green Slot 1 + Purpule Slot 1 = system dead
    Second: Green 2 + Purp 2 = system dead
    Third: Green 2, only one dice installed and heres what happend: It booted (wow!) but.. the system recognizes it as a 256 dice !! I've triple chcecked, its a double sided 512 module! When I insert both modules into green1 and green2 the system sees only 512 megs while it obvioulsly should see 1 GB !
    I have totally NO IDEA whats going one. The memory modules had been chcecked on a dual channel Nforce2 with a Barton CPU and it works perfectly at peak timings with the proper memory ammount.
    I ask You, what the hell is going on ?

    Interestingly enough I have exactly the opposit issue.
    With BIOS 3.0 my system detected all the memory.  
    I updated to 3.2 and now it only detects 1/2 my memory.  I tried all the slot swaping same issue.
    I've downgraded to BIOS 3.0 and my system randomly shuts off.
    K8T Neo2
    AMD 64 3000+ Winchster
    SimpleTech Dual Channel PC3200 2x512mb DDR400 DoubleSided

  • Still K8n neo2 random reboots !

    few days ago had random reboots while using/quiting games!
    almost try everything like testing other ram, Vga etc...
    and face the trouble coming from voltage line drops (low 3.3v).
    So decide to swap for better Psu and bought a hiper 480w type R.
    but still have that fu..... reboot
    try a single(noname) 512 ddr stick and hadn't the prob   
    like to know why dual channels ddr(512TwinX3200c2) don't work ?
    In fact i bought k8n neo2 instead of k8n neo cause of the dual capability!!!!
    anyone could help?
    please help!!!

    I've seen that happen on my older P4 when I overclocked it.  Games push your computer to the limits so it might be an issue with overheating or having the errors due to overclocking. 

  • Cool and Quiet on K8T Neo2-F V2.0

    I have been playing a bit with a K8T Neo2-F V2.0 (s939) and a Winchester 3200+.
    There seem to be a problem with the CPU fan control while using Cool and Quiet.
    BIOS is v3.6, os WINXP SP3, latest AMD proc driver installed.
    CnQ enabled in BIOS, Minimal power management in power options.
    The C'nQ itself works fine, but the fan blowing full blast 3300rpm all times.
    Is this a known problem? CnQ work fine in kubuntu 64-bit as well but no fan slowdown.
    Corecenter does not support this board.
    Tried speedfan, but on a brief test could not get it control the fan, unless I did something wrong.

    This board has no option for Smartfan in BIOS.
    From the manual, whatever it means for this board(seem like its just copied from a more feature rich board manual):
    "If the mainboard has a System Hardware
    Monitor chipset on-board, you must use a specially designed fan with speed sensor to take
    advantage of the CPU fan control."
    Currently using the stock HS& fan. Need to find a working solution for fan control.

  • K8t neo2-FSR random restart problem

    Hi.
    Yesterday I bought k8t neo2-FSR and AMD64 3000+. System restarting randomly. I found that agp and lan controller sharing same IRQ. I disabled the LAN and onboard audio from bios. Update bios to 3.3. Now there is no IRQ conflict. But it is still restarting randomly. I've checked the voltages wth MSI CORE CENTER. there is no problem.
    Any ideas?
    Thanks for replies.
    MSI K8T NEO2-FSR (BIOS 3.3)
    AMD64 3000+
    AOPEN 300 W POWER
    2X512 KINGSTON DDR3200
    LEADTEK FX5600 VGA (A310 VIVO)
    80 GB ATA133 HDD
    AUDIGY ES SOUND CARD
    LG CDROM
    PHILIPS DVD-RW
    XP PRO (SP2)

    I've checked the memories with memtest and got too many errors. . I've moved DDR's to slots 2-4 froom 1-3. And checked again with memtest. Still errors. I've removed one module and test again still errors. I think my DDR's and Neo2 are not happy together.  RAM timings for Kingston KVR400X64c3a/512 is 3.3.3.8. Help need. 
    Connected USB devices; ADSL router, MS Joystick, MS Mouse
    Thanks for replies.

  • Boot and OS install issues with K8T Neo2 F

    Can anybody shed light on my difficulties?
    Assembled a new computer yesterday.  First power-on produced nothing except 3 (2,3,4) red leds on d-bracket.  After reading several postings, tried the following:
    Swapped around memory modules;
    Did repeated JBAT1 data clears (NB if you happen to get a board with the V1.0 user guide, note that the JBAT1 diagram appears upside down - pin one is closest to the SATA slots (page 2 - 24).  The MSI downloadable user guide (V1.2) has that error corrected (page 2-25)
    The only memory config that doesn’t produce three red leds is with one 512 stick installed in channel 3 (green).
    Can now get to the point where Windows XP boots to the point where install is about to start, and then advises me that it can’t find a hard disk!
    Have dis/reconnected the sata cable (using different cables) and checked the bios setup but can find nothing strange except that setup refers to the hard disk as BBS 0 (RAID) ST3120827AS - the reference to “RAID” worries me.

    Paul, there have been people here that have had to strip their  system down to the bare minimum hardware to get windows to complete the install, so try that. I had trouble completing my windows install as long as I was trying to install the RAID drivers at F6. So I ignored the prompt at F6 and windows installed fine. Then I installed my RAID drivers afterward.
    These things are extremely sensitive when it comes to memory. I had the same problem you are having. Mine was cured by a BIOS upgrade to ver. 3.3. The simplest way to do it is to use "Live Watch". It will locate BIOS ver 3.3 for you, and download it to a floppy along with the flash program, and make it bootable all in one easy step. Then all you have to do is boot from the floppy you just made, and follow the instructions. Very simple.
    I've read all these stickies and posts now going way back, and IMHO anyone who wants to use RAM thats not on the list should do so at their own risk. Interestingly enough, the recommended list from MSI is not the same as the list from AMD. And the memory manufacturers have their own lists of RAM that they say will work with this board. I'm using 2x 512 sticks of GEIL from the MSI recommended list.
    Check out these links to see what I mean. By the way, if you haven't noticed, most of the older posts about memory problems are with respect to the K8T Neo FIS2R which is a socket 754 single channel board, so although they are similar, they're not the same. My point is just because his K8TNeo FIS2R works fine with brand "X" RAM doesn't mean your K8T NEO2 FIR will.
     http://www.msi.com.tw/html/products/mainboard/testreport_pdf/6702E/memory.pdf
    http://www.crucial.com/store/listparts.asp?Mfr%2BProductline=MSI+%28Micro+Star%29%2B+Motherboards&mfr=MSI+%28Micro+Star%29&cat=RAM&model=MS-6702E+%28K8T+Neo2-FIR%29&submit=Go
    http://www.mushkin.com/epages/mushkin.storefront/EN/product/991140
    http://www.amd.com/us-en/assets/content_type/DownloadableAssets/Athlon_64_Unbuffered_DIMM_AVL.pdf
    http://www2.amd.com/us-en/Processors/TechnicalResources/1,,30_182_869_9460%5e9461,00.html?1094454813
    Good luck!

  • How many K8T Neo2 different versions? (and how to tell them apart)

    First of all, hello everyone ^_^ This is my first post so... I hope I won't be annoying anyone.
    My questions are: is there a way to tell (from the name/item-code/prod number) which version "K8T Neo2" (code 6702-E) has the Promise controller onboard, and which not?
    Are there different mainboards for each country?
    The (long...sorry... ) explanation to my question follows :
    I live in Italy, and I'm trying to find a "K8T Neo2-FIR" MSI Mainboard, but it seems this mb model has not yet shipped in my country (I can find K8T Neo-FIS2R easily, but not the Neo2).
    I visited some (german) online shops, but descriptions are often not clear enough (and images are often taken from the wrong board...): which "6702-E" mb versions have the Promise controller on board?
    Having visited MSI site in different languages, it seems to me that for the american market (http://www.msicomputer.com) there are the "FIR" and "F" versions of the MB , the second without the Promise. For the german market ( http://www.msi-technology.de, the nearest country where i found online shops) there is only one 6702-E version of this mb, and it seems it's without the promise controller. Now, for the italian site (http://www.msi-italia.com) ... the link "Mainboards" leads to the international "msi.com.tw" site, where I read that the promise controller is "OPTIONAL"... so this doesn't give me any info.
    If anyone has experience of this, or any info, please reply
    Thank you in advance

    Try the following online stores :-
    http://www.ebuyer.com/customer/products/index.html?action=UFNTaG93UmVzdWx0cw%3D%3D
    http://www.scan.co.uk/index.asp
    http://www.overclockers.co.uk/
    I'm sure they will all ship within the EEC.

  • Help for N900 that randomly reboot and that have s...

    DISCLAIMER
    A moderator deleted an entire thread with details that have helped many many users with N900 phones that are rebooting because they believed we were discussing debranding N900s.. 
    Firstly, the N900 is not branded..
    Secondly, we were discussing changing settings on the device to stop the devices from randomly rebooting.. Something SUGGESTED BY NOKIA on the bugs.maemo.org bug tracker website.
    Nothing in this thread will invalidate your warranty and all information is condensed from official Maemo websites.
    If your device is randomly rebooting:
    RESTART YOUR DEVICE AFTER A RANDOM REBOOT
    There is a counter inside your phone that increases by 3 every time it randomly reboots. If this counter reaches 50 (after 17 random reboots in a row) your device will probably stop booting ALL TOGETHER!
    To stop your device from completely locking, you must power off your device normally. Use the power button then select "switch off". When you power your device back on, the counter is reset. Remember, if you don't reset your device, it will stop booting.
    REPAIRING A DEVICE THAT NO LONGER BOOTS
    If your device was randomly rebooting but now fails to boot it may have reached its count limit. When you turn on your device it may stop at the 5 dots loading screen and freeze.
    Here's a method for getting your device working again.
    Download flasher-3.5:
    For Nokia forums staff this is an OFFICIAL PUBLIC NOKIA TOOL. USING THIS TOOL DOES NOT AFFECT THE DEVICE WARRANTY. PLEASE DO NOT DELETE THIS POST AGAIN.
    Flasher can be obtained from the Nokia website:
    http://tablets-dev.nokia.com/maemo-dev-env-downloads.php
    Download and install flasher onto your computer. For more information on using flasher, you can see the maemo page here:
    http://wiki.maemo.org/Flasher
    Turn off your N900
    Remove the battery
    Insert the battery.. but leave it off
    Plug the USB cable into your computer.. This may not work in ALL ports on your computer. Sometimes ports at the back of the computer work better than those at the front.
    Open the keyboard on your N900, press and hold the 'u' button and plug the USB cable into the N900.. keep the u button pressed.
    The Nokia logo should appear on your device, a small USB icon should appear in the top right of the N900 screen. The backlight may not light up leaving the screen dark. You can release the u button now
    NOW ENABLE R&D MODE TO START THE DEVICE
    Use flasher application. On windows 7 this may mean running in windows xp mode
    Open a cmd window (start run cmd) then enter these commands:
    cd "\program files\maemo\flasher-3.5"
    flasher-3.5.exe --enable-rd-mode
    Flasher should run for a few seconds then exit.. If it hangs "waiting for suitable device" Try another port on your computer. Try a different computer. Ask questions here. Flasher doesn't always work on all machines
    Remove the USB cable from your N900 and turn it on. It should boot up. Note that there is a small spanner icon under the Nokia logo
    If your device still does not boot:
    Check that the spanner icon is present when you turn the device on. If it is not, the device is not in R&D mode.. Start going through these instructions again
    If the spanner logo is present and the device still does not boot, stop.. this process may not help you
    Turn the N900 back off
    Press and hold the u button on the keyboard and plug the USB cable in. Keep the u button pressed
    The Nokia logo should appear on your device, a small USB icon should appear in the top right of the N900 screen. The backlight may not light up leaving the screen dark. You can release the u button now
    NOW DISABLE R&D MODE TO START THE DEVICE
    In the cmd window on your pc, re-run the flasher command with a different option:
    flasher-3.5 --disable-rd-mode
    Remove the USB cable and turn the phone back on
    CHANGE ENABLE_OFF_MODE TO STOP RANDOM REBOOTS
     I have written a tool to help stop the random reboots on N900 devices. This tool issues the following command
    echo 0 > /sys/power/enable_off_mode
    and updates the /etc/pmconfig file to make the change permanent
    To use the tool you will need to install the rootsh package:
     http://maemo.org/downloads/product/raw/Maemo5/rootsh/?get_installfile
     Now download the fixpm.sh file:
     http://chris.intrepid.cx/N900/fixpm.sh
     Open an x terminal and type the following command
    sudo gainroot
    sh MyDocs/.documents/fixpm.sh enable
    If you would like to disable the update, you can use the following commands:
    sudo gainroot
    sh MyDocs/.documents/fixpm.sh disable
     Please click the kudos button if you found this helpful and please let me know if you have problems with the instructions, need help with them or if they didn't work
    Message Edited by cpitchford on 28-Dec-2009 07:12 PM

    Congrats!!
    There are some steps you can follow to help stop your phone from rebooting...
    Follow the steps in the first post under the section:
    CHANGE ENABLE_OFF_MODE TO STOP RANDOM REBOOTS
    Open these links on your N900:
    Download and install the rootsh package:
    http://maemo.org/downloads/product/raw/Maemo5/rootsh/?get_installfile
    Download the fix script:
    http://chris.intrepid.cx/N900/fixpm.sh
    Save it in the Documents folder
    Open an X terminal and run these two commands
    sudo gainroot
    sh MyDocs/.documents/fixpm.sh enable
    Message Edited by cpitchford on 30-Dec-2009 11:57 AM

  • K8T Neo2 socket 939 and Sempron??

    I just got a K8T Neo2 board in my hands, it's a socket 939 board... You knew that..
    A sticker on the box says that it supports AMD Sempron CPU, my thought is HOW?  I've only seen Semprons with Socket A and Socket 754, never a 939.
    Any info at all on this?
    Anders.

    Quote
    Originally posted by Jocko
    Probably something to do with seeking corpoate sales, to  save upgrade costs to large organisations.
    Hmm.. No matter how I try to figure out that thought, I can't see the solution?  If I headed a large corp. and bought 200+ mobos to use with Sempron and I couldn't assemble them, I'd probably strangle the closest MSI representative..  The worst part is that I can't find ANYTHING about this, not inside the box, not on AMD's site and not on MSI's site.  Only that damned label on the mobo box..  
    Quote
    welcome to the Folding Team, you can get a label with your details at top of Red Pockets stickies, by Bas.
    Thanks! Which immideately makes my wonder what "Red Pockets stickies" are...    Remember, I'm not a natively speaking English person...  
    Later,
    Anders.

Maybe you are looking for

  • Emulex lp1150 in Solaris 10

    Hello, everybody. I have installed Solaris 10 version 08/07 onto system HP DL385G1 with Fibre Channel Card - Emulex LP1150 Is Emulex LP1150 supported in solaris 10 ? I saw Sun HCL and Emulex supoort, but didn't find drivers for Solaris 10 on this FC

  • Can you use ESB to insert multiple records into a Database

    We have an XML file that has a Parent/Child relationship. In situation 1 we have a single parent record in the xml file. We can insert the record into the database successfully. In situation 2 we have a parent and a an associated child record. By usi

  • Pie chart to display top 5

    I am using pie chart to display the top 5 countries based on the values. For this, i created an advanced option where on the change of is country with TopN being 5 including others and show values is Pth pecentile (P=50) of @value percent. The proble

  • Resolution is horrible on new ATV3

    So I picked up the new ATV3 on Friday and have it all hooked up to my Denon AVR2311 receiver using HDMI.  Everything seems to be working but all of the content looks horrible when I view it on my 55" TV.  I tried iTunes content and previews of 1080P

  • To Server or Not to Server?

    I plan on buying a Mac Mini once Lion is released and the Mini is refreshed.  I'm trying to decide if I should upgrade to Server or just use VPN/remote access.  A little context and more on my setup.  I know just enough to be dangerous but I really d