Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Similar Messages

Kt3 ultra/ gf3 ti200 random reset with 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200, with 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Kt3 ultra and 9600xt fast write

Amd Barton 2500
dr. thermal ti-77n
Kt3 Ultra standard mobo w/5.7bios
Antec performance II sx835II case w/350 psu
Corsair 512 2100 x3
Ati 9600xt
Audigy ZS gamer
as some of u may be aware the 9600 family of cards are very picky about fast writes. In order to run games without lock ups/crashes i must enable fast writes. The problem is that when i do, i get corrupt text, lines around my cursors, video lag etc etc. I recently switch to a barton 2500 that is running a 1.87ghz at 133fsb, before i ran an 1800 that did not have any of these problems with fast write enabled. bios and xp recognixed it as a 2500+ and i have the ratio set to auto and memory set to HCLK. I tried varios drivers for the gfx card and all produced the same results. Also tried all combinations of bios fast write on gfx control panel off, on etc. any ideas?
TIA
-leo
pic of lines/box around cursor

fast write disabled = game willl lock, the 9600 family of cards are notorious for this, i was able to fix my corrupt text and cursor problem by moving the slider under troubleshooting in the ati panel down a notch. in game im still seeing some problems though, hopefully the game specific forums can give me some help. thiis is really annoying because the dam game ran fine with my 1800 i went to the 5.09 drivers on the reccomendation from another forumite.
screeny to show in game problem for those that care
www.theoldschoolers.com/Forums/uploads/post-11-1134154170.jpg
anyways this is more specific game related matter now, but i figured id post up a follow up for u guys anyways

KT3 ULTRA and memory

?( I have KT3 Ultra with 512meg 2x 256 in Sockets 1 and 2.
XP home and Athlon XP1800 I am trying to increase the RAM with another 256 in socket 3.
When there is a module in the 3rd socket the machine will crash. I have tried 3 different memory modules and even taken out the existing memory and swapped modules around but it will still crash. Sometimes it takes a couple of hours to crash and others it will happen on powering up. Today this is what the blue screen message said .
Problem with WIN32K.sys page fault in non paged area
It will crash during any software it doesnt seem fussy
Word, Photoshop IE6 whatever
Anybody have any ideas or advice where to go ?
TIA

are all 3 tottally identical maker revision etc
mixed never seem to work
try less agressive ram timmings
some times 3 just will not work is what ive seen
more ram draws more power is a possible reason

ITunes settings reset with every new version, and I get: "...the information on the iphone is synced with another user account"

Windows 7 64-bit with MS Outlook 2010. I've seen this now probably 10 times. When I first installed iTunes, I selected:
Preferences -> Devices -> "Prevent iPhonse, iPhones and iPads from syncing automatically".
and on my iPhone, I selected:
Info -> Sync Contacts with: Outlook.
Info -> Sync Calendars with: Outlook
Info -> Other -> Sync notes with: Outlook
This works great, and the settings stick. As soon as apple releases any new version (even minor) of iTunes and I install, I immediately receive: "...the information on the iphone is synced with another user account", and have to merge my calendar and contacts, but then once I get into iTunes, I find that ALL of the above settings (prevent syncing, sync calendar, contacts, notes) get reset and are turned off! I am running as a user account with Admin privaleges, but I don't right-click -> "Run as administrator" when I perform the iTunes update.
To reiterate, once I change the settings back, things work normally until the next iTunes update at which it gives me that sync error, and resets my sync options.
Any idea? Thanks!
-Brian

Is someone else using the PC and iTunes?
Create another user for the PC with your name, and try syncing that way.
This way it wont conflic with the other user.

Firefox crashes randomly even with all extensions disabled and new profile, but not in safe mode

Starting from about 2 weeks ago, Firefox has been crashing. The crashes is seemingly random, but normally happens when many pages/tabs are open. Also, all observed crashes happened in middle of some user operations. If I just leave it open(and loaded), it would never crash even after a long time.
Also, the crashes would still happen even after ALL extensions are disabled manually. However it doesn't seem to happen in Safe Mode.
After every crash, in the crash report dialog, the "Details" report would not respond. However I can open the reports using about:crashes.
Before the crash would happen, sometimes the following ill-behaviors could be observed:
* Firefox fails to render CJK characters, displaying them as square boxes instead
* CJK IME(Namely Google Pinyin, an IME for Simplified Chinese) could no longer be activated in Firefox, neither on a webpage element nor on UIs of Firefox itself(i.e. address bar or search bar)
The following has been tried but no luck:
* Disable ALL extensions manually
* Start a new profile
* Reset Firefox
* Uninstall/Reinstall Firefox
* Switch from FX 14 to 15, then to 16 beta

hello Rainarrow, some other users who have recently updated the graphics driver for their ati hardware (to ati catalyst version 12.8) have reported similar crashes. please try disabling hardware acceleration in firefox > options > advanced > general & see if this resolves the issue of frequent crashes for the moment.

Problems with combo KT3 ARU and GeForce 4?

Have been using GeForce 2MX with driver 30.82 w/out problems. When istalling ASUS ;( V8440, a GeForce 4 with Ti 4400 my screen goes bananas. Gets strange patterns even at BIOS startup. Hangs in WinXP. Starts in Safe-mode but still with strange patterns.
Heard rumors ?( that the problem might lie in the combo VIA and nVidia?
Have given up on the GeForce 4 unless someone can give me a hint of what might be wrong.
KT3 ARU w/2100XP/256 RAM (PC2700)/350W Pwrsupp.

Quote
What drivers are you using for the GeForce 4? Quote
Using nVidia 30.82, and yes, the mascine runs in safe mode (occationally), but with patterns. Usually grouped like this:
__ __ __ __ __ etc...
A guy at a local PC-store said something about it when I explained my problem. He had no solution and might be wrong.
Bernt

I need to reset my security questions because it says the answers I provided are not correct. How can I reset with new security questions and answers

I need to reset my security questions and answers. But nit is saying my birthday for a verification is invaid. How can I reset all of this?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(99552)

Need help with my kt3 ultra (only 127gigs maximum supported)

Hi, I have a 163 gigs hd and it show 163 when i start my computer. but in windows its still show 127 gigs.
I installed sp1 and it didnt help,now i tried this http://support.microsoft.com/default.aspx?scid=kb;en-us;303013
and its not working.
If someones know what is the problem pls say it,i dont know if its my bios..because it supose to support 160gigs+, and when i start my computer it show 163 like I said.

According to the specs for that board it supports upto 160gb I dont know if that means they havent tested it with anything higher or that anything higher wont work.
As it shows the correct size when starting the computer I dont think its a problem with the board.
What version of the bios is it?
I'm not sure if the bois supports 48-bit LBA but i think it should as it can reciognise the correct amount on start-up.
Are you certain you did exactly what the support page asked.
Another option maybe to partition the hard drive not sure if it would work but its just a thought.
Cheers
Michael

160 gigs hd probleme with my kt3 ultra

hi, i bought a new hd 160 gigs maxtor 7200 , and when i start my computer it show 163 gigs so its ok, i formateed it and in windows it show 127 gigs (ntfs).
well i know we lose some space when format but neber 36 gigs on 163 !.
can someones help me pls? who had the same problem? thanks

For your new hard drive to be recognised correctly by Windows XP you need to have SP1 installed. For details here:- Link If your CD is pre SP1 and you are doing a fresh install on your new drive you could do a slipstreamed install with SP1 included if you have access to a CD writer. Details of how to create the CD are here:- Link

When i plugged my ipod into the computer it reset with the new update and all my music on the ipod disappeared but the library showed my playlists still. Now its showing it as currupt and i cant even bring itunes up. What can I do? HELP please

What can I do to fix this. I cant bring anything itunes related up without that popup telling me it is currupt, and that I have redue it. Everytimg i have tried, it does the same thing. It was working once so I dont understand what went wrong and where. This is the 5th time redoing itunes, I've even tried restoring old versions. Nothing seems to be working.

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. This makes 1 look and act more like previous versions. Also go to iTunes>Help>iTunes Help>Sync your iPod>Sync your device>Set up syncing>Sync device manually.
to make sure you are follwoing the right instructions for drag and dropping.
If the songs do not play in iTunes on the computer then y willhave to reimport them into iTunes. For iTunes purchases you can
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Max "benefit" with KT3 ultra 2 and XP 333 cpu?

The KT3 ultra 2 board is based on the KT333 chipset and will support an XP 333Mhz(FSB) processor, but I'm a little confused about whether I can get the max performance out of an XP 333 chip with this mobo. I kind of remember seeing a discussion about this about a year ago when I bought my KT3 mobo and XP 1900+ 266(FSB) processor.
I guess my question basically is with a KT3 mobo and an XP chip with 333 FSB, which will be the "bottleneck"? Or are they really running at the same speed?
Thanks,
Chris

Quote
Originally posted by 1wingman
The KT3 ultra 2 board is based on the KT333 chipset and will support an XP 333Mhz(FSB) processor, but I'm a little confused about whether I can get the max performance out of an XP 333 chip with this mobo. I kind of remember seeing a discussion about this about a year ago when I bought my KT3 mobo and XP 1900+ 266(FSB) processor.
I guess my question basically is with a KT3 mobo and an XP chip with 333 FSB, which will be the "bottleneck"? Or are they really running at the same speed?
Thanks,
Chris
the benefit would be that you can run you cpu at 333 along with your ram at 333 no bottle neck!!!
but with the 266 fsb processors if you ran your ram at 333 and cpu at 266 the cpu is is the bottle neck!!!

What RAM works with KT3 Ultra (Orig) ????

Hey there,
SORRY BIGDADDY. Come to find out a new board
did not fix the prob I am having probs with the OS. Not
only that but several other programs don't work
like burning software, drivers, and the new DX won't
even install right. I figured NEW CPU...but as you can
see I need NEW RAM. So instead of buying PC133 for
almost the same price I figure get some DDR 2100 for
about $10-20 more and the KT3 is $10 more. Do the
math here and I could substantially increase my comp
considerably. :D
Foreveryone out there I need to know what ram works
with the KT3 Ultra. I know this board is very picking
about ram since the AMI bios is the issue.
I am looking at these:
1) Kingston PC2100
2) Crucial PC2100
3) Micron PC2100
Thanks in advance for any replies
SladeZero980
I also got a XP 1600 + for $66 from NEWEGG

OK I found a few minidumps in the event log
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
Hope these help

Big problem with KT3 Ultra (ms-6380e v1.0) after flashing the BIOS (de

Hello out there.
I have a real complicated matter with my Kt3 Ultra board.
Used to work fine, but after I flashed it with the latest BIOS (5.7), the board has this strange behaviour: when I clear the CMOS, the board boots up, when I change & save the settings, the board does not "come to life"(black screen & beeper silent).
It has also this weird problem: it shows garbage charaters on the voltage setting of the CPU. Instead of voltages (i.e. 1.750 etc. etc.) I have only "scrambled" strings.
I had MANY difficulties in upgrading the BIOS because the AMI-flashing utility kept telling me "bios protection enabled) (but there was NO bios-protect setting in the previous bios - I checked a zillion times)...but after trying with different revisions finally I made it.
I already tried everything (re-flashed older bios-es etc. etc.)and I'm starting to feel beat ... if you have any advice, please le me know.
It would be really SAD to put this great board in the garbage-dump....
Bye,
Wyk'03

im having problems with this board as well,
i had no problems with the flash,
i did this...
boot to win me floppy,
copy the flash files to ramdrive, flashed to latest bios..
now windows hangs when i have my ac97 audio enabled in bios...
I WANT MY AC97!
hmmm can you get to a dos prompt from a boot disk?
try re-flashing with 1.0 again and then disable the cmos virus protection thingy, and yes it was there it was in the 1.0 bios on the main screen.

Fan monitoring with KT3-Ultra 2 (ignore prev post)

Ok ppl, here's the deal,
just contacted MSI and apparently the KT3-Ultra and the K7T-266 Pro2A use the same PCB (different northbridge thoguh... not sure about soutbridge) and they do not support fan speed modification...
i'm still waiting on an answer for the KT3-Ultra 2-R
can anyone with this board verify if fan speed changin in windows works?
regs
kurt

No, my Ti4400 is not the Champ ed. The actual model number on it is 8871 ver-1.00. You can read about my problem's in the "Have you seen this?....." thread on this forum (page 7 now I think)
I haven't had a problem in the last couple days though. I removed some Reg tweaks (this is a DAW box) and ....dont luagh, turned up the heat in my house. I'm not sure if it was the Reg edit or Temp, but things are working ATM.
Nice to know I'm not alone though,
C

Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Similar Messages

Maybe you are looking for