Random Shut downs & Firmware update

I got my macbook the first week it was released. Was a charm - no problems at all, until I installed the firmware update. Same day I installed it, random shutdowns started.
I sent it back for repair on Friday, and got it back today (5 days later - Very impressed) with a note saying: Motherboard & Heatsink replaced.
Looks fine so far.
After being connected to the internet for a couple of hours, I got a pop-up asking me to install the firmware update.
Wasn't that supposed to be already installed in the new Motherboard?
Should I install it again?
Any ideas of what's going on?
thanks,
George

Yes, I had the same "Shutdown" problem with my MacBook after purchasing it about a month ago.
At first, I looked at the Discussion Boards to see if there were any similar problems; there were. Many were discussing symptoms of shutdowns after cold startups, rarely are "random". Many said PRAM and PMU resets were no use, and that the "holding down the power button for 5 seconds during startup" was only a Temporary Fix. The shutdowns became more frequent as you left the computer alone.
I then called up AppleCare and told them the problem. They told me to take it into the Apple Store and have it looked at. When I took it, I told the Genius the problem, and the "Genius" tried it himself, and like usual, it shutdown within a minute. Right away, he told me it needed to be repaired and they took it in. When I looked at the Order Form, it said he orded a new Logic Board and a Heat Sink so I'm guessing Apple knows the problem and the solution.
Since I'm in Canada, I was told that they did the repairs in-store instead of sending it in to the factory. After 2 business days, I received a call and they told me the repair was finished, so now I wait until I pick it up, to see if the problem is really fixed.

Similar Messages

  • Itunes randomly shuts down while updating ipod

    After i plug in my Video Ipod to my computer, Itunes recognizes it and begins to Update. After around 20-30 seconds of "updating" A window pops up saying..
    " iTunes has encoutered a problem and needs to close. We are sorry for the inconcenience.
    If you were in the middle of something, the information you were working on might be lost"...and so on
    At first i thought there was a problem with iTunes, so i tried updating my Nano..and THAT WORKED!
    So then once again i kept trying to update my Video ipod..but the same problem kept happening ( iTunes would shut down )..I thought if i restored my Video Ipod then it would work. However when i restored it and tried to Update it, iTunes would shut down again while its updating.
    now, all the songs on my video ipod are deleted and i can not get the songs back on it.

    I ended up just redownloading iTunes 6 and it works now. No word on how to actually solve my problem via iTunes 7.

  • MacBook randomly shuts down while watching streaming video

    I've been having a problem lately with my MacBook randomly shutting down. I initially thought it was due to overheating which was logical considering I was using my MacBook in bed and the computer was very hot when it would shut off, but I've recently started using a TV-Table top for it to sit on when I'm using it in bed. My MacBook continues to shut down and the computer isn't nearly as hot as it was prior to using the TV-Table top, it is just warm. It's definitely not a battery issue because this happens when I'm using the power source as well. *I think I've noticed that this only happens when I'm in Firefox watching online streaming video on sites such as YouTube.* I never use Safari so I'm not sure if the problem would occur in Safari or not. I tried installing the MacBook SMC Firmware Update v1.1 but it said my computer didn't need it.

    I have the same problem, every once in a not-so-blue moon my macbook pro shuts down while streaming video. It only happens when streaming video. Just watched some of the new south park episode, and it shut down on me! It really ticks me off!!!!!

  • 27-inch / 27" iMac Random Shut down

    SPECS:____________________________________________________________________________
    • 27" 2.8 GHz Intel Core i7 / 8gig / 1TB
    • OS 10.6.3 (about to update to 10.6.4)
    • All firmware updates have been applied according to software update
    • 3 external drives: 1-320 gig 800fw / 1-TB USB 2.0 / 1-500gig USB 2.0
    INFORMATION:____________________________________________________________________
    I've been running with this configuration ( 3 extra drives) since approximately December with no issues. Out of the blue... only running Aperture and Safari - my iMac JUST SHUTS off- WITHOUTwarning. It acted as though I was running a MacBook and the battery going dead/asleep. That's how random and sudden it shut down - NO WARNING. I did have the iMac asleep for about three hours before coming back to it to start working again when it shut down, but it should have even been cool.
    I only started reading around on the web to see of other incidents after this random shut down this evening, but I can't find anything specific. I've found A LOT of similar things - all seemingly related to "HEAT."
    And heat seems to be a certain issue recently - in the last day or two. Today I noticed my top back side to be hot, which isn't uncommon, however, it became so hot I really wasn't able to keep my hand on the top back. I've also noticed A LOT of spinning beach balls, and lots of processor delay! Heat??
    There are NO energy saver pref's set to automatically shut it down. The power was and is firmly set. There are no network settings, nor access to the iMac to have it shut down. It is not shared with anyone on the network.
    SUMMARY:___________________________________________________________________________
    • Today, I grabbed a couple temp / monitor widgets and am trying to watch the data. All components seem to be at/around/below 140 degrees F with ambient air at 77 degrees. I don't know numbers, but that all seems reasonable.
    • Going to update to OS 10.6.4 (doubt that's it!!)
    • I'm going to run the hardware test from my disc to see if ANYTHING. 8-p
    • AND... I'm going to call Apple to set up a case. It's still full under warranty, and I have 2 more years of AppleCare on it. But there's been too many things pointing to hardware to call this a software issue.
    I've dodged all the display issues with my iMac, but now.. I'm a bit hacked knowing how much I spent on this thing, with the initial DELAYS I went through, ordering it before it had even been released!
    ?? QUESTION ??_____________________________________________________________________
    So, has anyone else been having this issue, heard of a solution, seen anything on Apple's website of known issues ??
    Barry
    ( Grumbling bout my Mac)

    First, a precautionary Note:
    Apple "Call Directors" are outsourced, and from what I experienced today are idiots and liars. When asking for Customer Relations the first guy represented himself as Customer Relations. I knew he wasn't. I said he was a liar and hung up on him. The next gal transferred me to CPU tech support, even though I specifically stated "Customer Relations." So just keep your guard, know you're calling and who you're speaking with.
    UPDATE #2:
    I still don't think Apple knows about this issue enough, or they're just not saying that they're seeing it more.
    I spoke with a senior tech support advisor who said he believed it was a heat issue. It could be because the number of periph's I have attached, and that I might try unplugging those one at at time. I personally don't think that's it since I've been running the same configuration for over six months.
    To his credit, the Sr. tech said he wasn't convince of that, nor did he think it was a software issue, although he also suggested as a trouble shooting step - was to do partition my drive and try running an OS from there. Both suggestions kind of defeats the purpose of being able use my Mac and applications. Since this issue has only happened twice, he said he would rather have me trouble shoot on my own some more, rather take in for service and then have repairs not be able to duplicate the issue.
    The last thing I did before contacting Apple today was to do a SMC update, and the Sr tech I spoke with said that that step very well could resolve the issue. I also think the same since I just did the SMC firmware update a little over a month ago, and this issue just started a week ago.
    SUMMARY:
    Sorry... that's all I got so far. I'm just hoping I don't have any more random shut downs, and hope the SMC reset does the trick. I am very interested if anyone else has any better, any more info, any better solutions they've heard or come accross?

  • Random shut down issues and more, apple recieved puter today, on hold

    Ok so i have all the signs of a bad logic board or messed up puter. Mooing, random shut downs, dies during screen saver, and dies when lid is closed. I sent unit in yesterday, they got it today. Website sai on hold for infomation. So I gave them a call. They said they reseated the ram and its working and what else was wrong. I told then the mac genius did this twice and did all the other reset, then i got it home and it died again. There gonna start running more tests on it, i told her to tell the tech of the terminal thing to do to cause shut downs. ANd i told her of this post. She was extreamly nice to me and said there going to take care of me. they have had it for one afternoon, so i cant yell yet. I did ask that they replace the unit and send me a new one, she said they will run a more tests and go from there. I pointed her towards this forum as im sure many of you have and she said there going to and have been checking it out. So I guess there ontop of the issue. My bigest fear was getting the unit back andhaveing same problems. But hey thats what customer service is for so ill give applecare there fair chance first. Ill keep ya updated.

    here another scientist.
    Firmware is reversible by reflashing it ... it just
    need another set of istruction in binary package.
    My ISSUE is related ONLY with firmware,
    mathematically.
    Actually that's only partially true. It's only reversible by reflashing if someone has released the "reflash" package, which Apple has not. And so long as the changes it made allow a rollback of sorts. Many firmware updates will very clearly state that they can not be removed or undone. So... in your case, the previous poster was correct... it is impossible, through software to reflash your MacBook firmware
    Go ahead and try to even reload the firmware, your MacBook knows it is already updated and will not allow the firmware to be reflashed.
    Please, put your energy towards some other project, the SMC Firmware update, no matter how "coincidental" the timing of your RSD was, is not the root cause of the RSD.
    BTW - I will echo the same comments about your experience with the so called Apple Genius, he's a tool
    Call Apple or go to the Store and speak with someone else, in fact ask the Apple Genius if he is familar with the MacBook Random Shutdown. If he is not, ask to speak with one that is. The Apple Genius I spoke with was indeed familar with the problem and was simply great in processing my repair. Every instance so far has been related to a hardware problem.
    Good luck
    Greg

  • BOOT CAMP & RANDOM SHUT DOWNS?!.?!.?!.

    Now, I have posted a few topics and replied to a few as well reguarding the random shut down deal. I called Apple technical support and they were not support at all. I was talk to uninstall and re-install my RAM. The random shutdowns continued...and continued more often and whenever they desired. So, I removed BootCamp and I've been shutdown free...except for when I shut the machine down myself. I wonder if there is any relavince. Please post your situation...

    OK. I have both random shutdown, and vertical lines at start-up since I put the Firmware update on last week. Finally making some headway with it.
    I concur that holding the power button till the beep fixes the shutdown problem. It does this, by locking the CPU to 1.0 GHZ as the other poster mentioned, so we can summize that there is something with the auto-stepping and the latest firmware that are not playing nice.
    I have done what was suggested here, and am still running after 30 minutes. We will see.
    Next, on another post, the vertical lines issue was told to be solved by changing the resolution to 1152x720, then rebooting, then changing it back. That worked for me. I was not able to go into single user, was not able to hold the option and boot too another device, nor was I able to boot the comptuer without zapping the PRAM. now it seems fine.
    I too found the shutdown first in bootcamp. and was able to keep her running by using AC power rather than battery, or so I thought.
    So, all this seems to point to a bad firmware code set that either corrupts NVRAM or overwrites sections that cause the problems.

  • Mid-2010 15" MacBook Pro, random shut-downs running Mavericks,

    Since the last two Mavericks OS updates, beginning April 21st, I am experiencing random shut-downs on a mid-2010 15" MacBook Pro, any suggestions? I've seen posts regarding the known logic board issue, I had no problem before the last two OS updates. Seems to be related to sleep/wake. Running 10.9.2

    Hi Andy, would you take more look at this log. . . random shut down happened again, look at 11:54 am and before, I re-booted at 12:02. Had suspected my external monitor at the office, laptop does not do this at home, ran for three straight days, no issues. No monitor connected today as a test. Plugged in at the office for just over three hours and bam. could be the battery thing, will try AHT or Apple Diagnostics, could it be a Time Machine related issue? Thanks in advance.
    2014-05-12 11:07:02 -0500 mdworker32[4542]: CGSConnectionByID: 0 is not a valid connection ID.
    2014-05-12 11:07:02 -0500 mdworker32[4542]: CGSGetSpaceManagementMode: No connection with id 0x       0
    2014-05-12 11:07:39 -0500 com.apple.backupd[4529]: Copied 4124 items (121.1 MB) from volume Pearl. Linked 8137.
    2014-05-12 11:07:47 -0500 com.apple.backupd[4529]: Will copy (559 KB) from Pearl
    2014-05-12 11:07:47 -0500 com.apple.backupd[4529]: Found 45 files (559 KB) needing backup
    2014-05-12 11:07:47 -0500 com.apple.backupd[4529]: 997 MB required (including padding), 5.29 GB available
    2014-05-12 11:08:29 -0500 com.apple.backupd[4529]: Copied 112 items (562 KB) from volume Pearl. Linked 1151.
    2014-05-12 11:08:33 -0500 com.apple.backupd[4529]: Created new backup: 2014-05-12-110832
    2014-05-12 11:08:37 -0500 com.apple.backupd[4529]: Starting post-backup thinning
    2014-05-12 11:08:37 -0500 com.apple.backupd[4529]: No post-backup thinning needed: no expired backups exist
    2014-05-12 11:08:37 -0500 com.apple.backupd[4529]: Backup completed successfully.
    2014-05-12 11:32:19 -0500 Finder[207]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¬°¿".
    2014-05-12 11:32:20 -0500 Finder[207]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¬°¿".
    2014-05-12 11:32:30 -0500 Finder[207]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¬°¿".
    2014-05-12 11:32:31 -0500 NetAuthSysAgent[4579]: NAHSelectionAcquireCredential The operation couldn’t be completed. (com.apple.NetworkAuthenticationHelper error -1765328228 - acquire_kerberos failed gcross@LOCAL: -1765328228 - unable to reach any KDC in realm LOCAL, tried 0 KDCs)
    2014-05-12 11:32:31 -0500 kernel[0]: ASP_TCP CheckReqQueueSize: increasing req queue from 32 to 128 entries. so 0xffffff804073dca0
    2014-05-12 11:32:33 -0500 mds[38]: (Normal) Volume: volume:0x7ff3a281e000 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Public
    2014-05-12 11:32:33 -0500 Finder[207]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¬°¿".
    2014-05-12 11:32:38 -0500 Finder[207]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¬°¿".
    2014-05-12 11:32:44 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    2014-05-12 11:32:44 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: Bogus event received by listener connection:
    <error: 0x7fff7cc67b50> { count = 1, contents =
              "XPCErrorDescription" => <string: 0x7fff7cc67e60> { length = 18, contents = "Connection invalid" }
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowListAlpha: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:47 -0500 WindowServer[94]: CGXSetWindowTransform: Operation on a window 0x30c requiring rights kCGSWindowRightPresenter by caller com.apple.appkit.xpc.openAndSav
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: CGSSetWindowTransformAtPlacement: Failed
    2014-05-12 11:32:47 -0500 com.apple.appkit.xpc.openAndSavePanelService[4585]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    2014-05-12 11:32:58 -0500 com.apple.IconServicesAgent[237]: main Failed to composit image for binding VariantBinding [0x4d5] flags: 0x8 binding: FileInfoBinding [0x5d5] - extension: jpg, UTI: public.jpeg, fileType: ????.
    2014-05-12 11:32:58 -0500 quicklookd[4576]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:16 scale: 1
    2014-05-12 11:33:18 -0500 WindowServer[94]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    2014-05-12 11:33:18 -0500 WindowServer[94]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    2014-05-12 11:33:35 -0500 Mail[198]: view service marshal for <NSRemoteView: 0x7ff34af8e8c0> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x600001670180 {NSDebugDescription=The connection was invalidated from this process.}
    timestamp: 11:33:35.741 Monday 12 May 2014
    process/thread/queue: Mail (198) / 0x1167ee000 / com.apple.NSXPCConnection.user.endpoint
    code: line 2972 of /SourceCache/ViewBridge/ViewBridge-46.2/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
    domain: communications-failure
    2014-05-12 11:36:24 -0500 xpcproxy[4597]: assertion failed: 13C1021: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    2014-05-12 11:38:48 -0500 AddressBookSourceSync[4606]: -[ABPerson valueForProperty:com.apple.speech.ABSpeakable] - unknown property. This warning will be displayed only once per unknown property, per session.
    2014-05-12 11:42:32 -0500 CalendarAgent[246]: Account refresh finished without error
    2014-05-12 11:44:00 -0500 Mail[198]: Error while parsing IMAP response * FETCH 0(): Read failure
    Remaining text: <>
    Full text: <* 1601 FETCH (UID 1605 BODYSTRUCTURE (("text" "plain" ("charset" "iso-8859-1") NIL NIL "quoted-printable" 2650 89 NIL NIL NIL NIL)(("text" "html" ("charset" "iso-8859-1") NIL NIL "quoted-printable" 12502 268 NIL NIL NIL NIL)("application" "pdf" ("x-unix-mode" "0777" "name" "20x30 CiscoLive Setup 2014.pdf") NIL NIL "base64" 13318436 NIL ("inline" ("filename" "20x30 CiscoLive Setup 2014.pdf")) NIL NIL)("text" "html" ("charset" "us-ascii") NIL NIL "7bit" 215 0 NIL NIL NIL NIL) "mixed" ("boundary" "Apple-Mail=_5B6E2477-0D78-4444-AA9F-CF646CBAB667") NIL NIL NIL) "alternative" ("boundary" "Apple-Mail=_1B3AE229-4B2A-492B-9A58-8B6D4646DFDE") NIL NIL NIL) BODY[] {13335583}>
    2014-05-12 11:44:00 -0500 Mail[198]: Error while parsing IMAP response * FETCH 0(): Read failure
    Remaining text: <>
    Full text: <* 22 FETCH (UID 3887 BODYSTRUCTURE (("text" "html" ("charset" "iso-8859-1") NIL NIL "quoted-printable" 12422 267 NIL NIL NIL NIL)("application" "pdf" ("x-unix-mode" "0777" "name" "20x30 CiscoLive Setup 2014.pdf") "<1DD242D6-45FD-4ECD-A45E-B9FCA885D359>" NIL "base64" 13318436 NIL ("inline" ("filename" "20x30 CiscoLive Setup 2014.pdf")) NIL NIL) "related" ("type" "text/html" "boundary" "Apple-Mail=_7A5CFACB-E0DF-45E8-925E-643939094394") NIL NIL NIL) BODY[] {13332349}>
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.google - 6E8A0838-5473-4A78-8459-BAC083E3FA26
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.mail - 9818DF7B-981E-4E6B-AEAD-B16D7C6A6D81
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.aol - 778A4426-01BE-4C6C-8444-6FC0120A1133
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.yahoo - 4F991ADF-8780-4689-9753-97D40135AC28
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.ichat - 91FC1E34-B848-4515-91A2-0EF6FEDBB010
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.mail - B1813EC0-7766-4503-A436-66B7EE0ED990
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Got the following deleted accounts: {
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Looking for UUID: e42946fc-4773-422f-a238-98a3636480ab from remote key: 2cb478ddf4a0016262d195c5c5ad6e452f32c6
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Account not found during local discovery, however was not found in list of deleted accounts, will not delete: 2cb478ddf4a0016262d195c5c5ad6e452f32c6
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Got the following deleted accounts: {
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Looking for UUID: AC4EDF24-92B9-492F-A844-BCDB60A35A14-com.apple.reminders.iaplugin from remote key: 3060e48ea0e4808d99dbd780dbbe12792c7cde85
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Account not found during local discovery, however was not found in list of deleted accounts, will not delete: 3060e48ea0e4808d99dbd780dbbe12792c7cde85
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Got the following deleted accounts: {
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Looking for UUID: AC4EDF24-92B9-492F-A844-BCDB60A35A14-com.apple.calendar.iaplugin from remote key: 88d3b5c883ebb4377d8a2e59f5af84ad6bcf7e26
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Account not found during local discovery, however was not found in list of deleted accounts, will not delete: 88d3b5c883ebb4377d8a2e59f5af84ad6bcf7e26
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Got the following deleted accounts: {
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Looking for UUID: x-coredata://839DD974-DEFC-4093-9546-BA0C3C1783DB/IMAPAccount/p1 from remote key: fe2110d6ad4ad03db14f9f61674776365d112
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBSyncOperation mergeLocalChanges:]: Account not found during local discovery, however was not found in list of deleted accounts, will not delete: fe2110d6ad4ad03db14f9f61674776365d112
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary writeLocalMapping:]: Status: Writing out local mapping to disk
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBLocalDictionary writeLocalMapping:]: Status: Ending writing out local mapping to disk
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBRemoteDictionary writeDevices]: Status: Writing out of devices
    2014-05-12 11:51:33 -0500 icbaccountsd[4619]: -[ICBRemoteDictionary writeDevices]: Status: Ending writing out of device
    2014-05-12 11:54:04 -0500 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=4625[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    2014-05-12 12:02:32 -0500 bootlog[0]: BOOT_TIME 1399914152 0
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 syslogd[22]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    2014-05-12 12:03:10 -0500 kernel[0]: Longterm timer threshold: 1000 ms
    2014-05-12 12:03:10 -0500 kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    2014-05-12 12:03:10 -0500 kernel[0]: vm_page_bootstrap: 1911447 free pages and 169321 wired pages
    2014-05-12 12:03:10 -0500 kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    2014-05-12 12:03:10 -0500 kernel[0]: zone leak detection enabled
    2014-05-12 12:03:10 -0500 kernel[0]: "vm_compressor_mode" is 4
    2014-05-12 12:03:10 -0500 kernel[0]: standard timeslicing quantum is 10000 us
    2014-05-12 12:03:10 -0500 kernel[0]: standard background quantum is 2500 us
    2014-05-12 12:03:10 -0500 kernel[0]: mig_table_max_displ = 74
    2014-05-12 12:03:10 -0500 kernel[0]: Notice - new kext jp.co.canon.bj.print.BJUSBLoad, v10.69 matches prelinked kext but can't determine if executables are the same (no UUIDs).
    2014-05-12 12:03:10 -0500 kernel[0]: Refusing new kext jp.co.canon.bj.print.BJUSBLoad, v10.69: already have prelinked v10.75.20.
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=5 Enabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    2014-05-12 12:03:10 -0500 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    2014-05-12 12:03:10 -0500 kernel[0]: calling mpo_policy_init for TMSafetyNet
    2014-05-12 12:03:10 -0500 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2014-05-12 12:03:10 -0500 kernel[0]: calling mpo_policy_init for Sandbox
    2014-05-12 12:03:10 -0500 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2014-05-12 12:03:10 -0500 kernel[0]: calling mpo_policy_init for Quarantine
    2014-05-12 12:03:10 -0500 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    2014-05-12 12:03:10 -0500 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    2014-05-12 12:03:10 -0500 kernel[0]: The Regents of the University of California. All rights reserved.
    2014-05-12 12:03:10 -0500 kernel[0]: MAC Framework successfully initialized
    2014-05-12 12:03:10 -0500 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    2014-05-12 12:03:10 -0500 kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
    2014-05-12 12:03:10 -0500 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    2014-05-12 12:03:10 -0500 kernel[0]: ACPI: sleep states S3 S4 S5
    2014-05-12 12:03:10 -0500 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    2014-05-12 12:03:10 -0500 kernel[0]: [ PCI configuration begin ]
    2014-05-12 12:03:10 -0500 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0024
    2014-05-12 12:03:10 -0500 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    2014-05-12 12:03:10 -0500 kernel[0]: console relocated to 0xf80030000
    2014-05-12 12:03:10 -0500 kernel[0]: [ PCI configuration end, bridges 7, devices 16 ]
    2014-05-12 12:03:10 -0500 kernel[0]: [ PCI configuration begin ]
    2014-05-12 12:03:10 -0500 kernel[0]: [ PCI configuration end, bridges 8, devices 22 ]
    2014-05-12 12:03:10 -0500 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 7c6d62fffef943e8; max speed s800.
    2014-05-12 12:03:10 -0500 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    2014-05-12 12:03:10 -0500 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    2014-05-12 12:03:10 -0500 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    2014-05-12 12:03:10 -0500 kernel[0]: rooting via boot-uuid from /chosen: 7A3F1274-1AA3-3226-8D12-95CBFC410AEC
    2014-05-12 12:03:10 -0500 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    2014-05-12 12:03:10 -0500 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    2014-05-12 12:03:10 -0500 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    2014-05-12 12:03:10 -0500 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    2014-05-12 12:03:10 -0500 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    2014-05-12 12:03:10 -0500 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    2014-05-12 12:03:10 -0500 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500420ASG Media/IOGUIDPartitionScheme/Customer@2
    2014-05-12 12:03:10 -0500 kernel[0]: BSD root: disk0s2, major 1, minor 1
    2014-05-12 12:03:10 -0500 kernel[0]: BTCOEXIST off
    2014-05-12 12:03:10 -0500 kernel[0]: BRCM tunables:
    2014-05-12 12:03:10 -0500 kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    2014-05-12 12:03:10 -0500 kernel[0]: jnl: b(1, 1): replay_journal: from: 12292096 to: 17313280 (joffset 0x1638e000)
    2014-05-12 12:03:10 -0500 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    2014-05-12 12:03:10 -0500 kernel[0]: jnl: b(1, 1): journal replay done.
    2014-05-12 12:03:10 -0500 kernel[0]: hfs: mounted Pearl on device root_device
    2014-05-12 12:03:10 -0500 kernel[0]: hfs: Removed 27 orphaned / unlinked files and 8691 directories
    2014-05-12 12:02:38 -0500 com.apple.launchd[1]: *** launchd[1] has started up. ***
    2014-05-12 12:02:38 -0500 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    2014-05-12 12:03:04 -0500 com.apple.SecurityServer[15]: Session 100000 created
    2014-05-12 12:03:10 -0500 hidd[47]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    2014-05-12 12:03:10 -0500 hidd[47]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    2014-05-12 12:03:10 -0500 fseventsd[48]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (251018 38 251323)
    2014-05-12 12:03:18 -0500 kernel[0]: Waiting for DSMOS...
    2014-05-12 12:03:19 -0500 kernel[0]: VM Swap Subsystem is ON
    2014-05-12 12:03:19 -0500 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    2014-05-12 12:03:19 -0500 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    2014-05-12 12:03:20 -0500 fseventsd[48]: log dir: /.fseventsd getting new uuid: AE239A89-60C8-4D7F-9202-D032BF7D1FD9
    2014-05-12 12:03:20 -0500 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    2014-05-12 12:03:22 -0500 com.apple.usbmuxd[20]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    2014-05-12 12:03:22 -0500 configd[57]: dhcp_arp_router: en1 SSID unavailable
    2014-05-12 12:03:23 -0500 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,c5e1,2800]
    2014-05-12 12:03:23 -0500 configd[57]: setting hostname to "TheBlackPearl-2.local"
    2014-05-12 12:03:23 -0500 configd[57]: network changed.
    2014-05-12 12:03:23 -0500 kernel[0]: fNumVRAMBlocks is 4
    2014-05-12 12:03:23 -0500 kernel[0]: AGC: 3.4.35, HW version=1.9.21, flags:0, features:20600
    2014-05-12 12:03:23 -0500 kernel[0]: IOBluetoothUSBDFU::probe
    2014-05-12 12:03:23 -0500 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8218 FirmwareVersion - 0x0042
    2014-05-12 12:03:23 -0500 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x4800 ****
    2014-05-12 12:03:23 -0500 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x4800 ****
    2014-05-12 12:03:23 -0500 kernel[0]: NVDAStartup: Official
    2014-05-12 12:03:23 -0500 kernel[0]: NVDANV50HAL loaded and registered
    2014-05-12 12:03:23 -0500 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    2014-05-12 12:03:23 -0500 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    2014-05-12 12:03:23 -0500 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    2014-05-12 12:03:23 -0500 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    2014-05-12 12:03:23 -0500 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    2014-05-12 12:03:23 -0500 kernel[0]: Previous Shutdown Cause: -79
    2014-05-12 12:03:23 -0500 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    2014-05-12 12:03:23 -0500 kernel[0]: init
    2014-05-12 12:03:23 -0500 kernel[0]: probe
    2014-05-12 12:03:23 -0500 kernel[0]: start
    2014-05-12 12:03:23 -0500 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x4800
    2014-05-12 12:03:23 -0500 kernel[0]: [IOBluetoothHCIController][start] -- completed
    2014-05-12 12:03:24 -0500 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    2014-05-12 12:03:24 -0500 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xde00 -- 0xa000 -- 0x4800 ****
    2014-05-12 12:03:24 -0500 kernel[0]: IOMemoryDescriptor 0x3e04f5991d93d443 prepared read only
    2014-05-12 12:03:24 -0500 kernel[0]: Backtrace 0xffffff80006b9e6e 0xffffff7f8223f0e1 0xffffff7f82249fe2 0xffffff8000692fcf 0xffffff8000692b8f 0xffffff800068e769 0xffffff80006936e3
    2014-05-12 12:03:24 -0500 kernel[0]: Kernel Extensions in backtrace:
    2014-05-12 12:03:24 -0500 kernel[0]: com.apple.driver.AppleIntelHDGraphics(8.2.4)[84DE8845-D8E6-3C61-B457-1AC155AEF9 04]@0xffffff7f9a421000->0xffffff7f9a4e0fff
    2014-05-12 12:03:24 -0500 kernel[0]: dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f98aba000
    2014-05-12 12:03:24 -0500 kernel[0]: dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f98e98000
    2014-05-12 12:03:24 -0500 kernel[0]: IOMemoryDescriptor 0x3e04f5991d930343 prepared read only
    2014-05-12 12:03:24 -0500 kernel[0]: Backtrace 0xffffff80006b9e6e 0xffffff7f8223f2db 0xffffff7f82249fe2 0xffffff8000692fcf 0xffffff8000692b8f 0xffffff800068e769 0xffffff80006936e3
    2014-05-12 12:03:24 -0500 kernel[0]: Kernel Extensions in backtrace:
    2014-05-12 12:03:24 -0500 kernel[0]: com.apple.driver.AppleIntelHDGraphics(8.2.4)[84DE8845-D8E6-3C61-B457-1AC155AEF9 04]@0xffffff7f9a421000->0xffffff7f9a4e0fff
    2014-05-12 12:03:24 -0500 kernel[0]: dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f98aba000
    2014-05-12 12:03:24 -0500 kernel[0]: dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f98e98000
    2014-05-12 12:03:24 -0500 kernel[0]: DSMOS has arrived
    2014-05-12 12:03:27 -0500 configd[57]: network changed: v4(en0+:192.168.0.15) DNS+ Proxy+ SMB
    2014-05-12 12:03:28 -0500 com.apple.SecurityServer[15]: Entering service
    2014-05-12 12:03:28 -0500 mDNSResponder[39]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    2014-05-12 12:03:28 -0500 awacsd[61]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    2014-05-12 12:03:28 -0500 digest-service[74]: label: default
    2014-05-12 12:03:28 -0500 digest-service[74]:           dbname: od:/Local/Default
    2014-05-12 12:03:28 -0500 digest-service[74]:           mkey_file: /var/db/krb5kdc/m-key
    2014-05-12 12:03:28 -0500 digest-service[74]:           acl_file: /var/db/krb5kdc/kadmind.acl
    2014-05-12 12:03:28 -0500 loginwindow[42]: Login Window Application Started
    2014-05-12 12:03:28 -0500 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    2014-05-12 12:03:28 -0500 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    2014-05-12 12:03:28 -0500 configd[57]: network changed: v4(en0:192.168.0.15) DNS* Proxy SMB
    2014-05-12 12:03:28 -0500 mDNSResponder[39]: D2D_IPC: Loaded
    2014-05-12 12:03:28 -0500 mDNSResponder[39]: D2DInitialize succeeded
    2014-05-12 12:03:28 -0500 configd[57]: network changed.
    2014-05-12 12:03:28 -0500 awacsd[61]: InnerStore CopyAllZones: no info in Dynamic Store
    2014-05-12 12:03:28 -0500 mDNSResponder[39]:   4: Listening for incoming Unix Domain Socket client requests
    2014-05-12 12:03:28 -0500 systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
    2014-05-12 12:03:28 -0500 networkd[108]: networkd.108 built Aug 24 2013 22:08:46
    2014-05-12 12:03:29 -0500 mdmclient[40]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    2014-05-12 12:03:30 -0500 digest-service[74]: digest-request: uid=0
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 WindowServer[96]: Server is starting up
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 mds[38]: (Normal) FMW: FMW 0 0
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 stackshot[24]: Timed out waiting for IOKit to finish matching.
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 configd[57]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "*¿°¿".
    2014-05-12 12:03:30 -0500 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    2014-05-12 12:03:30 -0500 airportd[65]: airportdProcessDLILEvent: en1 attached (up)
    2014-05-12 12:03:30 -0500 airportd[65]: airportdProcessDLILEvent: en1 attached (up)
    2014-05-12 12:03:30 -0500 kernel[0]: createVirtIf(): ifRole = 1
    2014-05-12 12:03:30 -0500 kernel[0]: in func createVirtualInterface ifRole = 1
    2014-05-12 12:03:30 -0500 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
    2014-05-12 12:03:30 -0500 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    2014-05-12 12:03:30 -0500 kernel[0]: Created virtif 0xffffff802c968400 p2p0
    2014-05-12 12:03:30 -0500 mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    2014-05-12 12:03:30 -0500 digest-service[74]: digest-request: netr probe 0
    2014-05-12 12:03:30 -0500 mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    2014-05-12 12:03:30 -0500 digest-service[74]: digest-request: init request
    2014-05-12 12:03:30 -0500 digest-service[74]: digest-request: init return domain: BUILTIN server: THEBLACKPEARL-2 indomain was: <NULL>
    2014-05-12 12:03:30 -0500 mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    2014-05-12 12:03:30 -0500 mdmclient[40]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    2014-05-12 12:03:30 -0500 locationd[44]: NBB-Cou

  • Macbook Pro Randomly Shuts Down and Restarts

    Hi There,
    This issue appears to have occured for other people in different forms but there does not appear to have been a conclusive answer to the problem, so here's hoping someone here might be able to provide some further insight into the issue, and with some luck, a solution.
    I have an early 2008 MacBook Pro running OS X 10.7.2 (plugged-in to power) that has started to randomly shut down and then restart itself (goes through all the start up screens; Apple logo etc.). It doesn't appear to be just a straight restart of the machine, but it shuts down, and then a couple of seconds later, reboots, as though it is two different actions...
    The computer does this pretty randomly, and now quite often. It happens when applications are running, Safari for example, and when nothing is running and i just go to open Finder or use Spotlight.
    I haven't had this issue in the past (some 3+ years of full time use now) and as far as i'm aware, nothing changed on the computer immediately prior to the issue occuring (no updates, installs etc.).
    I've checked the systen log which, each time the issue occurs, returns the message 'Previous Shutdown Cause: -128'. I've sought reference as to what this refers to, but it would appear to be a mystery to the WWW.
    I have tried the following solutions with no success:
    - Proper restart and reboot of system;
    - Repair permissions;
    - Reset SMC;
    - Reinstall OS X.
    Any thoughts on what the problem is, what the '-128' refers to, or what more i can try to solve the issue?
    Your help is much appreciated! Thanks.

    I know this is a really old thread, and everyone's probably already bought new computers now. However, I'm still using my 2010 MacBook Pro and have been experiencing this very frustrating issue. However, I think I just found a way to open a finder window that prevents the shut down. In Finder>Preferences>General, under "New Finder windows show", I had "All my files" selected (BAD?), which probably was the cause, because setting that to "Desktop" instead has prevented shut downs, for now. Just thought I should share this tip, in case anyone else suffers from this annoying issue.  If anyone has a better tip or a real fix, please post a reply! There are still people, like myself, working on these older machines who would appreciate the info. THANKS!

  • 8x randomly shutting down

    My 8x has been randomly shutting down as of about a week ago.  I updated the phone, performed a soft reset and hard reset and none of that has helped.  Has anyone else had the same issue?

    Yes Geordan_Ganka,
    I have an HTC W8 phone (WP8X). There appears to be no rhyme or reason for the shutdowns. Sometimes, I'll just reach into my pocket and pull it out, press the power button - and realize it's OFF, when it had been ON when I deposited it earlier. Other times I'll be actively using it (typically Pandora) and it'll just power-down - I do see the "Goodbye" screen. It doesn't vibrate or make noise when this happens and it's sudden. I would say the phone shuts off about once daily, if not more frequently than that. I refuse to use the phone as an alarm clock because of this and it has resulted in a multitude of voice mail, which I'm not pleased with as the phone is my only line.
    Do these symptoms sound similar to your power-down issues?

  • MBP randomly shuts down without warning

    Lately my MBP has been randomly shutting down when not plugged in to charger.
    No warning, battery isn't low (usually about 50% charge), and the machine just turns off completely and won't turn back on until I plug it back in.

    Here's what that shows (not sure what to look for):
    Battery Information:
    Model Information:
    Serial Number: SMP-bq20z951-394e-1382
    Manufacturer: SMP
    Device name: bq20z951
    Pack Lot Code: 0000
    PCB Lot Code: 0000
    Firmware Version: 002a
    Hardware Revision: 000a
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 2720
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4208
    Health Information:
    Cycle count: 26
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 1210
    Voltage (mV): 11950
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 30
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    GPUSwitch: 2
    Battery Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 2
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    GPUSwitch: 2
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: Yes

  • My Droid Maxx randomly shutting down

    My Droid Maxx randomly shutting down. Several times a day and on full battery. Sometimes after using an app or camera, and sometimes it will just be sitting on my desk, Ill go to use it and notice it is off. I have tried hard reset, but nothing seems to work. Anyone else having this issue in the past couple of weeks since last update?

        rbuskill,
    Let's get this resolved! Please enable safe mode here http://vz.to/14eG5n8 test and share if you are still experiencing the issues. If so, please backup and complete a factory reset here http://vz.to/1xFz0Gq If not, I suggest removing applications in effort to find the root cause. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • IMac randomly shuts down

    My IMac randomly shuts down. I have the energy saver set for computer to sleep after 1 hour. I have not installed any new software. This problem began about a month ago. I have to use the restart button and always get an error, that the computer shut down unexpectedly. I copied one of the Panic Reports if that will help resolve the problem. I have checked the "maximum temperature" in Console and get no messages and many messagfor "shutdown".
    Istat:(Celsius)Temps
    HD:MacIntosh 49
    CPU 39
    CPU Heatsink 39
    Fans:
    Optical Drive 798rpm
    Hard Drive 1599rpm
    CPU Drive 1199 rpm
    I also use Airport Extreme Version 7.4.2
    Any ideas?
    Thanks
    Message was edited by: Raydream

    Hi Raydream ,
    Try another outlet in another part of the house
    Do you use a surge protector? do you have another surge protector to try? Just in case some thing is wrong with the surge protector your using. Also dose any thing else turn off or just the computer.
    things you can try:
    Make sure your software is up to date:
    http://support.apple.com/kb/ht1338
    Verify your firmware is up to date:
    http://support.apple.com/kb/ht1237
    reset the SMC:
    http://support.apple.com/kb/ht3964
    reset NVRAM:
    http://support.apple.com/kb/ht1379
    if your still having the issues I would back every thing up and then book an appointment for the closest apple store genius bar.
    http://www.apple.com/retail/geniusbar/
    if there is no apple store near you i'd locate an authorized repair center:
    http://support.apple.com/kb/ht1434 , for the US it's http://www.apple.com/buy/locator/service/
    you can also call apple care (1 800 APL CARE)

  • Since installing OSX 10 my iMac randomly shuts down and restarts.  I can not determine why this is happening.  Any ideas?

    Since installing OSX 10, my iMac randomly shuts down and restarts.  I can not determine why this is happening.  Any ideas?

    1. This is a comment on what you should and should not do to protect yourself from malicious software ("malware") that circulates on the Internet. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
       3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandboxing security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you always stay within a safe harbor of computing practices. How do you know what is safe?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is unsafe.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are outside the safe harbor, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe. For instance, if a web page warns you that Flash is out of date, do not follow an offered link to an update. Go to the Adobe website to download it, if you need it at all.
    Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    "FREE WI-FI !!!" networks in public places are unsafe unless you can verify that the network is not a trap (which you probably can't.) Even then, do not download any software or transmit any private information while connected to such a network, regardless of where it seems to come from or go to.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. Most of the real danger comes from highly targeted "zero-day" attacks that are not yet recognized.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    Anti-virus software may be able to tell you which particular trojan it is, but do you care? In practice, there's seldom a reason to use the software unless an institutional policy requires it.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • MBP Random Shut Down

    My daughter has a recent 13" MBP running 10.6.2. Lately, since the 10.6.2 upgrade, the machine has taken to randomly shutting down. There doesn't seem to be a pattern. This evening she lost a couple of hours of work because of this (and not saving often enough). Has anyone else experienced this? I haven't found much on the forum.
    Rick.

    I agree with previous posts.
    I was having similar issues and here's what I did:
    -download the combo 10.6.2
    -repair permissions
    -update 3rd party applications (i.e. Flash)
    -repair permissions and verify disk to be sure (again)
    -reset PRAM
    -restart
    -reset SMC
    -also did a hardware test from the Apple Care Tech Tool
    Sounds like paranoia but all of my issues were frustrating - kernel panics, application running slowly, random restarts, hot temps, fans 6000+ RPMs, iDVD, CPU spikes, slow start and shut down, etc.
    As of now, no issues and everything is running smoothly. Actually, SL is running faster than ever before. Flash websites are operating fine.
    Hope this helps for anyone else.
    Message was edited by: TKNY77
    null

  • Photoshop & Illustrator CS6 randomly shuts down

    Photoshop cs6 32bit
    Illustrator cs6 32bit & 64bit
    when I working in these programs randomly shuts down. I don't know why.
    I tried remove, install and update. but still randomly shuts down.
    I have 2 computers
    - photoshop
    1. OS : windows 7 pro 32bit
    memory : 4 GB
    VGM : GeForce 330
    - illustrator
    2. OS  : windows 7 pro 64 bit
    memory : 8 GB
    VGM : GeForce 310
    I tried these solutions
    1. removed any special fonts.
    2. removed plug-ins
    3. start -> %appdata% -> roaming -> Adobe -> Adobe photoshop(illustrator) CS6 -> end process all of adobe
    -> renamed Adobe photoshop(illustrator) CS6 settings to Adobe photoshop(illustrator) CS6 settingsold -> restart the CS6

    "Random" doesn't exist in the computer world. There's always a specific cause. Find the exact crash info:
    Working with your Operating System’s Tools
    Mylenium

Maybe you are looking for

  • Pro C/C++ Problem on Mandrake 7.2

    I am trying to compile a C++ program using proc on Linux and everything works fine until when I actually try to compile the output source from proc using g++. The problem is that there is a function sqlcxt(void **, unsigned int *, sqlexd *, const sql

  • Can i print from iPad wireless to my printer w/o getting an Air printer?

    I have a router that can print from my PC or from my Lenovo laptop wirelessly to a Canon printer that is wired to the router via an ethernet cable. is there some way to get the iPad to see the printer without having to buy on of those Air Printers? i

  • MacBook 2ghz... no middle row of keys=no fan

    I've had my macbook for about 2 years I guess. It has recently stated acting up. Not too long ago the middle row on my keyboard stopped working. (asdfghjkl) I shut the computer down and restarted it about 1/2 hour later. The keyboard functioned prope

  • Mail is different after upgrading to snow leopard

    I upgraded to Snow Leopard a few days ago and I had to set up my email accounts from scratch when I re-started my computer - is this normal? Also, before I upgraded, I had my 3 email addresses under the "Inbox" tab, then Drafts etc. I still have that

  • Problemas batería xperia Z1

    Tengo un Xperia Z1, por 19 meses, hace un mes la duración de la batería disminuyó drásticamente, actualicé a Android 5.0.2 (Lollypop), esperando solución al problema y nada, cada día la batería (no extraíble) dura menos. Voy a cambiar el terminal y n