Random shutdowns...need help

They only seem to happen when im playing games. I suspected the powersupply but according to this caluclator http://www.jscustompcs.com/power_supply/ I should have plenty of power. I cannot turn the computer back on unless I unplug/replug the powercable back in.
My system specs are
Athlon 64 3500+
K8N Neo2 plat
BFG Geforce 6800 GT
1 cdrw drive
1 dvdrw drive
1024mb TwinX memory
74GB WD Raptor
1 120mm fan
1 80mm fan
Audigy 2
USB Joystick
COOLMAX 400W PSU that I got from newegg. Supposed to be good
http://www.newegg.com/app/viewProductDesc.asp?description=17-159-023&depa=0
The powercable im using is one i salvaged from an old computer which is a few years old... but powercables should all be the same right?
I read in another thread that I need a 20A powersupply. I think this PSU does that but the powercable reads 10A/125V, is that the culprit?

Quote
Originally posted by Supershanks
Apocalyps,
if you need help please post spec. i'd  assume Gomy's talking to  Meteo Quote
First there are some overheat problems with some 6600 and 6800 juste take a look at the temp of your card when you are playing.
and isn't clairvoyant
Meteo,
Quote
What do you guys think of this PSU?
Frankly not a lot.
You need a quality PSU with at least 24a on 12v
see Quote
As this pertains to A64's make sure that you have a power supply that is either approved for use by MSI/AMD or that you have plenty of amps on the 12 volt rail. Typically we have noted many issues based on stability with PSU's being rated at less than 24A on the 12v rail.
Basic Building Tips
try Looking for a PSU for some ideas.
Ok if you want specs from me:
CPU: AMD 64 3200+
MAINBOARD: MSI K8N Neo Platinum
RAM: Corshairs TwinX 1024mb
PSU: Zalman ZM400B
I just called to MSI they didnt know this problem but they could tell me you need a PSU that gives at least 16A on the 12V, recommend is 18A...
And i know he was talking to meteo i just give my opinion on his reply refering to my problem...

Similar Messages

  • Random Crashes - Need help!!!

    Hi there,
    As of about 24 hours ago my MBP started udergoing random shutdowns under normal usage (ie, firefox browsing with two tabs, microsoft word open, and itunes). The crashes were sporadic and random, and at a point I couldn't even boot to the log in screen. So far I have done the following:
    Verified and repaired permissions and disk, run Onyx and most task options available in that, ran the AHT which came back with no errors during the short test, and tech tool deluxe which came back with "video ram failure". I just reinstalled the OS and backed up from time machine, tech tool and disk utility came back fine, was up for 3 hours until a random crash and now can't boot to the log in screen. I haven't run disk warrior yet. Earlier today I was able to boot into safe mode though. I'm not sure what to do and of course apple care ran out last week. Any thoughts/suggestions/ideas! I really need to get this up and running for school and work!
    Thanks!
    -John

    Thanks Allan. I have a friend going down to Lewiston this friday so I was thinking of possibly trying to stop by that store. In terms of the PCLe lane width it does report x16. I've been running SMC fan control and that has been pretty stable temp wise, the fans haven't shot up to 6000 and the computer hasn't felt warm when it has crashed. The back has been unobstructed every time - it has crashed on my lap, on my desk, and on my floor (wood) I know previously the system kept slowing down and there were a few tasks hogging system ram. This was the forum link I posted that in, although I never got much feedback about what to do.
    http://discussions.apple.com/thread.jspa?threadID=2320137&tstart=0
    Not sure if that helps explain anything. I'm thinking of calling apple customer relations today and seeing if they can't help with anything in terms of the numerous issues/repairs this has gone through.

  • 32GB itouch is zooming in at random times, need help!

    I just got an itouch for my birthday four days ago and was browsing and playing an application while the itouch was charging and randomly, it zoomed into the screen. I thought it was no big deal and when I tried to get it not to zoom, it wouldn't let up. I looked at the troubleshooting and nothing seems to be helping, the only time when it isn't zoomed is when I click on an app. and just for one second it zooms out then it goes right back in. this is getting really frustrating and I need help, any suggestions?

    Double-tap the screen with 3 fingers to toggle zoom off and on.
    To disable the screen zoom, go to Settings->Accessibility->Zoom and switch it off.

  • I am having a problem with the shutdown need help....

    When I shutdown my computer I get a message saying that I had to shut my computer down even though I was, here is the report, can anyone help me? I don't have the protection plan anymore it ended a year ago.....
    Interval Since Last Panic Report:  249821 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    FC186157-8A25-430D-B57B-4BE000A0D7CD
    Wed Jul 13 01:42:39 2011
    panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x8b0e5bf9, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x4b3a4000, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x4b3a4000, ECX: 0x00000005, EDX: 0x0081e03c
    CR2: 0x4b3a4000, EBP: 0x8ae4be28, ESI: 0x15f60244, EDI: 0x8ae4bf40
    EFL: 0x00010206, EIP: 0x8b0e5bf9, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x8ae4bc38 : 0x21b837 (0x5dd7fc 0x8ae4bc6c 0x223ce1 0x0)
    0x8ae4bc88 : 0x2abf6a (0x59e3d0 0x8b0e5bf9 0xe 0x59e59a)
    0x8ae4bd68 : 0x2a1a78 (0x8ae4bd80 0x8adbb8e0 0x8ae4be28 0x8b0e5bf9)
    0x8ae4bd78 : 0x8b0e5bf9 (0xe 0x50c0048 0x10 0x10)
    0x8ae4be28 : 0x8b0e5205 (0x15f50684 0x0 0x47b1eb 0x0)
    0x8ae4be48 : 0x8b0e6c7b (0x1630cd90 0x1 0x47b232 0x0)
    0x8ae4be68 : 0x47b21d (0x15c67d04 0x1 0x0 0x2)
    0x8ae4bec8 : 0x4b6d1e (0x15c4d9f0 0x8ae4bf40 0x8ae4bef8 0xe)
    0x8ae4bf28 : 0x4be6f7 (0x15c4d9f0 0x8ae4bf40 0x8ae4bf40 0x584ef4)
    0x8ae4bf78 : 0x4f7f90 (0x15c63a80 0x15bc4ba0 0x15bc4be4 0x0)
    0x8ae4bfc8 : 0x2a1fd8 (0x15b08240 0x2 0x2a17ab 0x15b08240)
          Kernel Extensions in backtrace (with dependencies):
             com.mcafee.kext.Virex(1.0.0d1)@0x8b0e4000->0x8b0e8fff
    BSD process name corresponding to current thread: VShieldScanManag
    Mac OS version:
    10K540
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 62497321338231
    unloaded kexts:
    com.apple.filesystems.cd9660          1.4.1 (addr 0xf07000, size 0x36864) - last unloaded 22062267315969
    loaded kexts:
    com.mcafee.kext.Virex          1.0.0d1
    com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 21446489075474
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleHDA          2.0.5f13
    com.apple.driver.AudioAUUC          1.57
    com.apple.GeForce          6.3.6
    com.apple.driver.AppleUSBDisplays          289
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMCEDriver          1.1.9
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleLPC          1.5.1
    com.apple.filesystems.autofs          2.1.0
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleUSBUHCI          4.2.0
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.DspFuncLib          2.0.5f13
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.nvidia.nv50hal          6.3.6
    com.apple.NVDAResman          6.3.6
    com.apple.iokit.IONDRVSupport          2.2
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleHDAController          2.0.5f13
    com.apple.iokit.IOGraphicsFamily          2.2
    com.apple.iokit.IOHDAFamily          2.0.5f13
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.driver.AppleUSBHIDMouse          162
    com.apple.driver.AppleHIDMouse          162
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOATAPIProtocolTransport          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 13 GB, SMC 1.7f10
    Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en2
    PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
    Serial ATA Device: WDC WD2500JS-41SGB0, 232.89 GB
    Serial ATA Device: ST32000542AS, 1.82 TB
    Parallel ATA Device: PIONEER DVD-RW  DVR-111D
    USB Device: Hub, 0x05ac  (Apple Inc.), 0x912f, 0xfd400000 / 3
    USB Device: Apple Cinema HD Display, 0x05ac  (Apple Inc.), 0x9221, 0xfd420000 / 5
    USB Device: Hub, 0x05ac  (Apple Inc.), 0x9131, 0xfd300000 / 2
    USB Device: Apple Cinema HD Display, 0x05ac  (Apple Inc.), 0x9223, 0xfd320000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8206, 0x5d200000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x5d100000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0304, 0x5d110000 / 5
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x5d130000 / 4
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    FireWire Device: unknown_device, Unknown

    Okay, uninstalled the program... But I am still having the issue of the power button icon coming up in the background telling me to shutdown the computer and turning on the computer. Could this be a bad hard drive? I did some research on it befor I bought the 2 TB hard drive. I got the Seagate Barracuda HD. When I looked it up on the Internet the website said that the errors were taken care of for this particular HD. Unless I was miss informed. Is there a way some one can help me find out what this error belongs to? I don't know if it is actually the HD or not.

  • Excel 2007 Random Crashes - Need Help

    I have three users reporting random crashes in Excel. Only one of their Event Logs contains any pertinent information.  I've tried searching and have tried to fix based off two technet articles I found.. however, no luck.
    Can anyone assist me in diagnosing these?
    Log Name:      Application
    Source:        Application Error
    Date:          10/17/2014 10:31:42 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      [email protected]
    Description:
    Faulting application name: EXCEL.EXE, version: 12.0.6425.1000, time stamp: 0x49d64dd6
    Faulting module name: EXCEL.EXE, version: 12.0.6425.1000, time stamp: 0x49d64dd6
    Exception code: 0xc0000005
    Fault offset: 0x0002637c
    Faulting process id: 0x338
    Faulting application start time: 0x01cfea1f62c5bd01
    Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE
    Faulting module path: C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE
    Report Id: b164b26e-5612-11e4-806b-546629d0db16
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-10-17T15:31:42.000000000Z" />
        <EventRecordID>6353</EventRecordID>
        <Channel>Application</Channel>
        <Computer>User-PC-Name</Computer>
        <Security />
      </System>
      <EventData>
        <Data>EXCEL.EXE</Data>
        <Data>12.0.6425.1000</Data>
        <Data>49d64dd6</Data>
        <Data>EXCEL.EXE</Data>
        <Data>12.0.6425.1000</Data>
        <Data>49d64dd6</Data>
        <Data>c0000005</Data>
        <Data>0002637c</Data>
        <Data>338</Data>
        <Data>01cfea1f62c5bd01</Data>
        <Data>C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE</Data>
        <Data>C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE</Data>
        <Data>b164b26e-5612-11e4-806b-546629d0db16</Data>
      </EventData>
    </Event>

    Thanks Allan. I have a friend going down to Lewiston this friday so I was thinking of possibly trying to stop by that store. In terms of the PCLe lane width it does report x16. I've been running SMC fan control and that has been pretty stable temp wise, the fans haven't shot up to 6000 and the computer hasn't felt warm when it has crashed. The back has been unobstructed every time - it has crashed on my lap, on my desk, and on my floor (wood) I know previously the system kept slowing down and there were a few tasks hogging system ram. This was the forum link I posted that in, although I never got much feedback about what to do.
    http://discussions.apple.com/thread.jspa?threadID=2320137&tstart=0
    Not sure if that helps explain anything. I'm thinking of calling apple customer relations today and seeing if they can't help with anything in terms of the numerous issues/repairs this has gone through.

  • Getting Kernel Panics every time I shutdown Need Help!

    It boots fine, AHT says hardware is ok, and runs like normal but the minute I shutdown it Kernels any help will be greatly appreciated.
    Here is the report:
    Interval Since Last Panic Report:  54984 sec
    Panics Since Last Report:          12
    Anonymous UUID:                    5FDFE808-4B52-4483-B8A9-3CFD08A530D9
    Sat Jul 26 11:07:17 2014
    panic(cpu 2 caller 0x2ceabf): Kernel trap at 0x0029b2e2, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x543d0434, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x543d0434, EBX: 0x034f4000, ECX: 0x543d0434, EDX: 0x044f4528
    CR2: 0x543d0434, EBP: 0x7db9b3a8, ESI: 0x04bf6008, EDI: 0x000014a1
    EFL: 0x00010212, EIP: 0x0029b2e2, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x7db9b1f8 : 0x2203de (0x6b08cc 0x7db9b218 0x229fb0 0x0)
    0x7db9b228 : 0x2ceabf (0x6bd9e0 0x29b2e2 0xe 0x6bd989)
    0x7db9b2d8 : 0x2e5564 (0x7db9b300 0x7db9b2e8 0x7db9b2f8 0x668fa4)
    0x7db9b2f8 : 0x29b2e2 (0xe 0x7db90048 0x10 0x10)
    0x7db9b3a8 : 0x29b472 (0x4bf6008 0x1 0x7db9b3c8 0x0)
    0x7db9b3c8 : 0x29b9d8 (0x4bf6008 0x1 0x7db9b438 0x0)
    0x7db9b9f8 : 0x29c380 (0x4bf6008 0x1 0x7db9ba18 0x2b6f59)
    0x7db9ba38 : 0x26ade8 (0x12cc7c80 0x7db9bbc8 0x1 0x8)
    0x7db9bcd8 : 0x26b15c (0x12cc7c80 0x0 0x0 0x1000)
    0x7db9bd28 : 0x594383 (0x130856a0 0x0 0x0 0x1000)
    0x7db9bd68 : 0x30c8b7 (0x133827b4 0x0 0x0 0x4)
    0x7db9bdb8 : 0x30c53f (0x113023fc 0x40 0x7db9bde8 0x113023a8)
    0x7db9bdf8 : 0x30ddc3 (0x1 0x0 0x7db9be18 0x329a93)
    0x7db9be48 : 0x31ccd4 (0xf598c50 0x0 0x1b 0x22a082)
    0x7db9be88 : 0x30b947 (0xf598c50 0x80000 0x0 0xf261b14)
    0x7db9bea8 : 0x572a88 (0xf7acc20 0x0 0x0 0x7db9bef0)
    0x7db9bf08 : 0x57f896 (0x1 0x0 0x7db9bf2c 0x2bcb7e)
    0x7db9bf78 : 0x5f3c2a (0xf7acc20 0xf53fd54 0xf261a58 0xf53fd50)
    0x7db9bfc8 : 0x2e60a7 (0xf53fd50 0x0 0x10 0x101882d0)
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 205589710091
    last loaded kext at 157147669027: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0x977e2000, size 16384)
    loaded kexts:
    com.avid.usb.mbox.driver 1.1.1
    com.digidesign.iokit.DigiDal 10.3.7f41
    com.paceap.kext.pacesupport.snowleopard 5.9.1
    com.apple.driver.AppleUSBCDC 4.1.22
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
    com.apple.driver.AppleUpstreamUserClient 3.5.9
    com.apple.driver.AppleMCCSControl 1.0.33
    com.apple.driver.AppleHDA 2.2.5a5
    com.apple.driver.AudioAUUC 1.59
    com.apple.GeForce 7.3.2
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.GeForce7xxx 7.0.4
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AudioIPCDriver 1.2.3
    com.apple.driver.AppleMCEDriver 1.1.9
    com.apple.driver.ApplePolicyControl 3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
    com.apple.driver.AppleLPC 1.6.0
    com.apple.iokit.SCSITaskUserClient 3.2.1
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.1.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 33
    com.apple.driver.AppleFWOHCI 4.9.0
    com.apple.driver.AppleAHCIPort 2.3.1
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
    com.apple.driver.AppleUSBHub 5.1.0
    com.apple.driver.AppleEFINVRAM 1.6.1
    com.apple.driver.AppleUSBEHCI 5.1.0
    com.apple.driver.AppleACPIButtons 1.5
    com.apple.driver.AppleUSBUHCI 5.1.0
    com.apple.driver.AppleRTC 1.5
    com.apple.driver.AppleHPET 1.7
    com.apple.driver.AppleSMBIOS 1.9
    com.apple.driver.AppleACPIEC 1.5
    com.apple.driver.AppleAPIC 1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
    com.apple.nke.applicationfirewall 3.2.30
    com.apple.security.quarantine 1.4
    com.apple.security.TMSafetyNet 8
    com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
    com.apple.driver.AppleSMBusController 1.0.10d0
    com.apple.driver.DspFuncLib 2.2.5a5
    com.apple.nvidia.nv50hal 7.3.2
    com.apple.nvidia.nvGK100hal 7.3.2
    com.apple.nvidia.nvGF100hal 7.3.2
    com.apple.NVDAResman 7.3.2
    com.apple.nvidia.nv40hal.G7xxx 7.0.4
    com.apple.NVDAResman.G7xxx 7.0.4
    com.apple.iokit.IOFireWireIP 2.2.5
    com.apple.driver.AppleUSBAudio 2.9.0f5
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSurface 80.0.2
    com.apple.iokit.IOSerialFamily 10.0.5
    com.apple.iokit.IOAudioFamily 1.8.6fc18
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 2.2.5a5
    com.apple.iokit.IOHDAFamily 2.2.5a5
    com.apple.driver.AppleGraphicsControl 3.1.33
    com.apple.iokit.IONDRVSupport 2.3.4
    com.apple.iokit.IOGraphicsFamily 2.3.4
    com.apple.driver.AppleSMC 3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
    com.apple.driver.AppleSMBusPCI 1.0.10d0
    com.apple.driver.IOPlatformPluginFamily 5.1.1d6
    com.apple.driver.AppleUSBHIDKeyboard 160.7
    com.apple.driver.AppleHIDKeyboard 160.7
    com.apple.iokit.IOUSBHIDDriver 5.0.0
    com.apple.driver.AppleUSBMergeNub 5.1.0
    com.apple.driver.AppleFileSystemDriver 13
    com.apple.driver.AppleUSBComposite 5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOATAPIProtocolTransport 3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
    com.apple.iokit.IOFireWireFamily 4.4.8
    com.apple.iokit.IOAHCIFamily 2.0.8
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.iokit.IONetworkingFamily 2.1
    com.apple.iokit.IOUSBUserClient 5.0.0
    com.apple.driver.AppleEFIRuntime 1.6.1
    com.apple.iokit.IOHIDFamily 1.7.1
    com.apple.iokit.IOUSBFamily 5.1.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 177.8
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.DiskImages 331.7
    com.apple.iokit.IOStorageFamily 1.7.2
    com.apple.driver.AppleKeyStore 28.18
    com.apple.driver.AppleACPIPlatform 1.5
    com.apple.iokit.IOPCIFamily 2.7
    com.apple.iokit.IOACPIFamily 1.4
    Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 10 GB, SMC 1.7f10
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 256 MB
    Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz, 0x802C, 0x39485446363437324A592D36363742344433
    Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz, 0x802C, 0x39485446363437324A592D36363742344433
    Memory Module: DIMM Riser B/DIMM 1, 4 GB, DDR2 FB-DIMM, 667 MHz, 0x0198, 0x4B494E4753544F4E20202020202020202020
    Memory Module: DIMM Riser B/DIMM 2, 4 GB, DDR2 FB-DIMM, 667 MHz, 0x0198, 0x4B494E4753544F4E20202020202020202020
    Memory Module: DIMM Riser A/DIMM 3, 512 MB, DDR2 FB-DIMM, 667 MHz, 0x802C, 0x39485446363437324A592D36363742344433
    Memory Module: DIMM Riser A/DIMM 4, 512 MB, DDR2 FB-DIMM, 667 MHz, 0x802C, 0x39485446363437324A592D36363742344433
    Network Service: Ethernet 2, Ethernet, en1
    PCI Card: NVIDIA GeForce 7300 GT, sppci_displaycontroller, Slot-1
    Serial ATA Device: ST500DM002-1BD142, 500.11 GB
    Serial ATA Device: Hitachi HDT721010SLA360, 1 TB
    Serial ATA Device: ST2000DM001-1E6164, 2 TB
    Serial ATA Device: WDC WD10EALS-00Z8A0, 1 TB
    Parallel ATA Device: SONY    DVD RW DW-D150A
    USB Device: Mbox, 0x0dba, 0x5000, 0xfd300000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd400000 / 3
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd440000 / 4
    USB Device: USB Uno MIDI Interface, 0x0763  (M-Audio), 0x0150, 0xfd443000 / 7
    USB Device: Maschine Mikro MK2, 0x17cc, 0x1200, 0xfd442000 / 6
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd441000 / 5
    USB Device: Microsoft USB Optical Mouse, 0x045e  (Microsoft Corporation), 0x00cb, 0xfd441300 / 9
    USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfd441200 / 8
    FireWire Device: built-in_hub, 800mbit_speed

    You have 3rd party drivers installed.  Try booting into Safe Mode and see the problem still happens.
    <http://support.apple.com/kb/ht1564>
    You have a mix of RAM modules.  If the 3rd party drivers are not the problem, consider restoring the Mac to "Original" Apple provided RAM to see if it is the 3rd party RAM additions you have made.

  • Blackberry 8520 Keeps Restarting Randomly! Need Help Now!!

    I've had my blackberry for more than a year. My blackberry keeps on restarting after a send someone a message on whatsapp. A message pops up on my blackberry saying that there is an error with whatsapp and something about terminating. Its really annoying. It always does this after I use whatsapp.  It always does this after I use whatsapp.Its been happening for the past 3 day! Could Someone Help Me. 

    Hi and Welcome to the Community!
    We understand your situation is urgent to you...but please understand that this is a volunteer-contributed user-to-user community. No one is paid to participate here, but rather does so out of the kindness of their heart. As such, it is customary to wait 24 hours before "bumping" your thread to try and re-gain attention.
    Nevertheless...from what you describe, this is a problem with WhatsApp itself...and you would need to contact the developer for support of their app.
    But, have you tried the basics yet? As in, removing, rebooting, and reinstalling the app?
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Firefox 27 crashes randomly. Need Help

    Hi,
    I'm at my wits end here with the firefox on my laptop randomly crashes.
    Below is the most recent crash report submitted.
    bp-a9e305e2-e93e-4825-9c03-d00482140316 16/3/2014 8:29 PM
    bp-842563f2-0a87-4af6-bd29-76bfa2140316 16/3/2014 7:50 PM
    bp-a1cfaab7-226d-4706-8bc0-15dcb214031616/3/2014 1:24 PM
    bp-a1598730-0511-4e1e-8b47-53929214031616/3/2014 8:27 AM
    Can anyone please be kind and look at the reports and tell me whats the problem?
    Thanks.
    p.s. My laptop specs
    Processor : Intel I5-4200U @1.6-2.3 ghz
    Ram : 4gb
    Windows : Windows 8.1 64bit

    hello lulusantos, thanks for reporting with your crash ids - it looks like those crashes are triggered by the norton confidential software that is active on your pc...

  • Random Errors - NEED HELP!

    Hey Guys,
    Im completely at a loss. For the last two weeks I have been getting the following ichat errors:
    An AIM service error occurred. The server message was: Serv:RequestTimeout & You where disconnected by a computer that supports multiple logins.
    I can connect to Ichat, add buddies, see there status, but when i try to chat or start a video call i get an error. But every now and then it works with selected people.
    I have tried:
    -Using a different AIM account
    -Changing log in ports
    -Deleting preferences out of the library
    -Adjusting quicktime & ichat bandwidth settings.
    -Using ichat on a different user on my mac
    Can someone help me? I rely on Ichat and it was always fine, now it dead!
    Thanks guys!
    Anthony

    Hi,
    You will see lots of stuff like this
    10/03/2008 17:03:31 com.apple.launchd[1] (com.apple.distccdConfigd[44]) Exited with exit code: 255
    10/03/2008 17:03:50 com.wacom.pentablet[93] TabletDriver[93]: ISO keyboard: ISO
    10/03/2008 17:03:51 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[101]) Exited: Terminated
    10/03/2008 17:03:51 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[95]) Exited: Terminated
    10/03/2008 17:03:51 com.apple.launchd[1] (com.wacom.pentablet[93]) Exited with exit code: 255
    10/03/2008 17:03:51 com.apple.launchd[1] (com.apple.ScreenSharing.server[94]) Exited: Terminated
    10/03/2008 17:03:52 com.wacom.pentablet[106] TabletDriver[106]: ISO keyboard: ISO
    10/03/2008 17:04:03 textexpanderd[125] textexpanderd 2.0.5 at your service
    10/03/2008 19:32:03 com.apple.launchd[86] (com.apple.PubSub.Agent) Throttling respawn: Will start in 8 seconds
    10/03/2008 19:41:11 [0x0-0x12012].com.apple.finder[118] Mon Mar 10 19:41:11 Ralph-Johnss-G4.local Finder[118] <Error>: CGImageCreate: invalid image size: 0 x 0.
    10/03/2008 19:41:58 Finder[118] NSOpenGLAutoscaleBounds=NO
    10/03/2008 20:23:20 textexpanderd[125] bye
    10/03/2008 20:23:22 System Preferences[425] re-launch textexpanderd on account of version upgrade
    10/03/2008 20:23:23 [0x0-0x3f03f].com.apple.systempreferences[425] No matching processes belonging to you were found
    10/03/2008 20:23:25 textexpanderd[430] textexpanderd 2.0.5 at your service
    10/03/2008 20:34:01 com.apple.launchd[86] ([0x0-0x42042].com.apple.Console[442]) Exited: Terminated
    As you will find there is lots of it and I have only copied some visible stuff from my window
    I would like you to look at the time that the problem occurred and see what was happening in the System log and the Console Log at that time.
    We could do with spotting something that might tell us the path (location) of whatever CMS is.
    8:37 PM Monday; March 10, 2008

  • Ive Been Having Random Shutdowns, Any Help?

    Im not sure what the problem is, it makes this powering down sound then cuts off. anyone know what my problem is?

    call applecare and arrange for repairs
    there is nothing you can do to permanently fix it on your own. others have suggested running in throttled mode (hold down power for 5 seconds while starting up) to run the CPU locked at 1 ghz, allowing you to back up your data and perform some functions

  • Random Shutdowns on a MBP Core Duo, Suggestions/Help would be great

    I've had two random shutdowns of my mac since purchasing it back in August. The first happened on January 11th, when it said it was at 11-12% power. The second happened about two weeks later, at 23% power. I've been looking around these forums and other pages, and haven't really found anything that has helped so far.
    Details of the first crash:
    Open apps- Firefox (5 windows, two had about 20+ tabs open, the rest were single page, and yes, I know it crashes often with that many), Camino (1 window with 5 tabs), and Word 2004, as well as Quicktime open to the iPhone stream.
    I had an USB key plugged in, to which I was saving my Word document.
    So I was working in Word while in front of the TV and during an interesting bit, didn't do anything for a minute. So, like the many times earlier, it slept the display to conserve power (in "Better Energy Savings" mode). I moved my finger on the trackpad to wake it back up, and it turned back on the backlighting, and then stopped. I thought it had just went back to sleep, but after a few key presses and a check of the light that usually pulsates when it's sleeping (plus the USB key , I found out that the computer had turned off. I let it sit for a while, and when I plugged it back into AC power and turned it on, with my USB key still plugged in, and although it booted to my desktop, the Finder never started (so no desktop icons for anything), unplugging the USB key fixed this and everything returned to normal. I then installed the only update I was missing, one for iChat, restarted, and continued working.
    In the second incident, I only had my browsers open, nothing external plugged in, and my displayed was dimmed to the third darkest level. When it was at about 23% power, it once again randomly shut down. This time, I attempted to turn it back on, and nothing happened. After plugging it into AC power, it turned on and once logged in showed a very low (2-6%) power, so I guess it was reporting the power incorrectly?
    Anyways, went back to look at the battery exchange on Apple's website. I had checked before when they started it, and was pretty sure mine wasn't covered, and a second check confirmed that. My Mac's serial is W8618091VWX, which isn't covered by the recall.
    So, I have a few questions:
    1. Is there a toll-free number I can phone Apple (Canada) at? The only number I've found seems to be only free for those who bought their computer in the last 90 days, which I'm no longer covered by, and haven't been for a while. Talking to someone at Apple would be good.
    2. Otherwise, if I took my computer to an Authorized Service Provider, would they be able to take a look at it and answer some questions? I bought my MBP at a London Drugs and they aren't service providers, so how much would it cost to do this?
    3. Is there a definite cause for these random shutdowns? It seems to vary among other people, so it would be helpful if I could try something to eliminate one of the causes.
    4. Does Tiger report battery levels pretty accurately? In the past when I reached 6% I got a warning and was able to plug it into AC power and had no problems.
    Thanks for any help you can provide.
    Macbook Pro 2.16 GHZ Core Duo, 15.4", 1GB RAM   Mac OS X (10.4.8)  

    I had this problem of RSD fixed for a while after having had the battery replaced by Apple, till yesterday, when the MBP suddenly experienced a shutdown during a meeting presentation, while it was connected to the AC power. At the first restart, as coming back from a stop-mode, for a while appeared a warning of low-battery level, with battery level indicator flashing red and showing the empty icon but with a 86% of charge level and a new shut-down definitely put the MBP out of service, no way to have it functioning again. Obviously, AC power was OK, no problem with the microphone or the projector ( I was at the podium of an international meeting) and a lucky precaution ( double save of the same presentation on a friend's twin MBP, that worked correctly) saved the job.
    Then, a couple of hour later, my MBP started up normally and everything works fine, with or without MAGsafe connected to AC power, almost up to now.
    I've read the post with a link to the procedure for resetting the power controller chip on the mainboard, I'll do it in a minute, hoping that this will help.
    Any further suggestion?
    ambabu, Italy

  • Screen freezes and popup message says I need to do a shutdown and then restart.  It does it sometimes 2 times a day. Im new to apple and need help.

    My screen freezes and popup message says I need to do a shutdown and then restart.  It does it sometimes 2 times a day. Im new to apple and need help.

    Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
    Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
    Here is a great MacFixIt article.
     Good Luck!
    DALE

  • Need help in shutdown primary for maintaince (new to oracle dba)

    Hi,
    BANNER
    Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
    PL/SQL Release 9.2.0.4.0 - Production
    CORE 9.2.0.3.0 Production
    TNS for Linux: Version 9.2.0.4.0 - Production
    NLSRTL Version 9.2.0.4.0 - Production
    actually we have primary database server and the physical standby server with protection mode is maxperformance and for maintaince we need to shutdown primary server so what are the steps i need to follow since my primary database is configured with DATAGAURD and i would like to follow the folllowing steps please advice me:
    to shutdown standby server:
    from primary server connecting to dgmgrl
    dgmgrl>DISABLE SITE standby_site1;
    then connecting to standby server
    sql>alter database recover managed standby database cancel;
    sql>shu immediate;
    and finnaly connecting to primary server
    sql>shu immediate
    is it right since i am new to datagaurd concept need help.
    Regards
    Prakash

    You can do so, but you would shutdown the whole standby environment. But normally standby is used to have no or only short downtime. So a switchover to the standby DB is performed (after this standby is now running as primary), maintenance is done on the primary and then at the end another switchover back from the 'new' primary to the 'old' primary.
    Werner

  • Help - Thermal or Random Shutdowns

    My MBP 15” is outside the warranty and developed what appears to be a thermal shutdown issue. After a period of time it just shuts down. When I restart, it shuts down again very quickly. Each restart results in a shutdown sooner than the last. If the MBP is left off for a longer period of time it will restart, but shuts down after 10 or so minutes.
    Being out of warranty and being brave I dismantled it and found nothing outwardly wrong. However, the heat sink compound was pretty dried and cake-like. So I cleaned and replaced the compound and fired it up only to have the problem once again. The compound may have helped a little, but it is not statistically significant. I also pulled the battery backup wire while I dismantled the MBP. I am not sure if that erases the non-volatile memory or not.
    The problem shutdowns occur with and without the battery installed. The only way I have been able to work around this problem was to install a third-party fan control program. I set the minimum fan speed to 2500 – 3000 RPMs and life is fine. I have not had a shutdown in the last two weeks since I installed the fan control program. That tells me that the thermal sensors are probably initiating the shutdown. I can’t say what they are measuring is real or not.
    However, I can’t recall ever hearing the fans before the MBP shuts down. I hear them now with the fan program running, but I can’t ever recall hearing them before the install. Any thoughts?

    Have you run something like iStat Pro... just to get an idea of what the temp sensor readings are? It's possible you may have just a faulty sensor... Something like iStat Pro:
    http://www.apple.com/downloads/dashboard/status/istatpro.html
    or Temperature Monitor:
    http://www.versiontracker.com/dyn/moreinfo/macosx/19994
    ... will give you the reported temps of a number of components. If you have a faulty sensor... it should be easy to detect (for example, if your heat sink shows 120 C but both your processors show around 60 C and your other heatsink slightly lower... you'll know the first heat sink probably has a bad sensor). The first generation MacBooks had a problem with random shutdowns due to a faulty heatsink sensor. Apple was able to put out a firmware update that basically ignored the faulty sensor... but for those that had the problem, if they run one of the above programs... they can still see the faulty readings... only their machines no longer shut down as they are now ignored.
    You should first determine your processor and heatsink temps... just to make sure you actually are not experiencing an overheat problem vs. just a faulty sensor.

  • Need help with codings on generating random words

    hi guys.. i need help with generating random words from a list of array. please help me with the codings.. let me know the other variables that are needed if required as well.. thanks a million..
    private String wordList[] = { "abstraction", "command", "arithmetic", "backslash" };

    Hi,
    You can use the Random class to generate Random number between 0 to the array length and use the generated random number as index in to the Strign array.
    To generate Random number use the following code
    Random r = new Random();
    num = ((r.nextInt() >>> 1) % wordList.length);
    num will have the randomly generated number.

Maybe you are looking for

  • How to configure default Printer Storage mode for specific user?

    Dear all, When we try to print something from the SAP, we can manually change the settings of the printing by clicking on the "Properties". Inside the "Properties", there is a "Ouput Options", extend it, and we can see a field called "Storage Mode".

  • IPod will no longer connect to Wi-fi properly

    Okay, so today I had to reset my wireless netgear router due to some stupid issues, but in the end I got it to work and my desktop and laptop computers are connected to it and work fine. However, my iPod and my brother's iPod, both 4th generation tou

  • Open file in folder with command line program

    I have a file, which is in native format for a given program [1] I have installed. This program I can start from Terminal.app and within the program I can open the file. The question is if I can have associated with this specific filetype this progra

  • My library vanished.

    I left my itunes library unattended for a few hours, my ipod was not connected but the window was open on the screen. When I came back the library was empty, I connected my ipod and nothing changed. It said that all of my playlists were empty as well

  • Multiple channels switch scanning DMM

    Hi, I am using DMM (NI PXI  4071) and switch (NI TB 2627). I want to do the measurement by scanning one channel then start to measure, after that go to another channel and start to measure again (so called syncronous). But, I have problem in my code