Random shutdowns/related to bad RAM? pls help

my 3 week old macbook was randomly shutting down all day yesterday. apple agreed to replace it. i just put the original RAM back in the macbook to prepare it for shipment back to Apple. i've had it on for a bit now and it has yet to randomly shutdown.
Is it possible that the RAM i bought from newegg is defective and that was the problem? what are symptoms of bad ram?
thx

thanks all. early this morning after i posted this i re-installed the newegg ram. ran the memtest. it took alot longer with 2gb to finish the test but it came out fine. i got up just now. the macbood was asleep. i lifted the screen and have been running alot of programs to see if it will shut down. it is working great.
so maybe the newegg ram was seeded wrong? maybe some kind of bump or something knocked it slightly out of place? I've had the newegg ram installed for the last 3 weeks and had no problems before so i cant understand why it would just stop working.
is there any was else i can test to see if this ram is working like 2gb should work?
anyone think it is highly probable that i do not have the random shutdown problem?

Similar Messages

Random Shutdown related to Bootcamp?

How many people here with the random shutdown problem also has the Bootcamp software installed on their Macbooks?
When I had my random shutdown problem, I had the Bootcamp software installed. But after I reformated my Harddrive and reinstalled Mac OS X, without installing Bootcamp, it seems that the random shutdown is not occuring anymore at this point.
I tried booting up from a cold start a several times and it works fine.
So is it somewhat related to that beta Bootcamp software or what?

Since it happens to users that are not using Boot Camp, in Windows, Linux, and in Tiger, it would seem that it is a hardware issue.
Whether it is a bad battery, a cold solder joint, or something else entirely is yet to be determined.

Performance issue related to BSIS table:pls help

Theres a select statement which fetches data from BSIS table.
As in the where clause the only key field used is BUKRS its consuming more time.Below is the code.
Could you please tell me how to improvise this piece of code.
I tried to fecth first from BKPF table based on the selection screen paramater t001-bukrs and then for all entries in BKPF fetched from BSIS.But it didnt worked.
your help would be very much appreciated.Thanks in advance.
SELECT bukrs waers ktopl periv
         FROM t001
         INTO TABLE i_ccode
         WHERE bukrs IN s_bukrs.
SELECT bukrs hkont gjahr belnr buzei bldat waers blart monat bschl
shkzg mwskz dmbtr wrbtr wmwst prctr kostl
           FROM bsis
           INTO TABLE i_bsis
           FOR ALL ENTRIES IN i_ccode
           WHERE bukrs EQ i_ccode-bukrs
           AND   budat IN i_date.
Regards
Akmal
Moved by moderator to the correct forum
Edited by: Matt on Nov 6, 2008 4:10 PM

Dnt go for FOR ALL ENTRIES it will not help in this case .Do like below , you can see a lot of performance improvement.
SELECT bukrs waers ktopl periv
         FROM t001
         INTO TABLE i_ccode
         WHERE bukrs IN s_bukrs.
sort i_ccode by bukrs.
LOOP AT i_ccode.
   SELECT bukrs hkont gjahr belnr buzei bldat waers blart         monat bschl shkzg mwskz dmbtr wrbtr wmwst prctr kostl
         FROM bsis
        APPENDING TABLE i_bsis
        WHERE bukrs EQ i_ccode-bukrs
        AND   budat IN i_date.
ENDLOOP.
I dnt know why perform is good for the above query than "bulrs in so_bukrs" .This willl help , i m sure. this approach helped me.
Edited by: Karthik Arunachalam on Nov 6, 2008 8:52 PM

To Everyone with Random Shutdowns! (Solved! REALLY!)

Hey all,
I had posted about a week back about my Macbook (Core duo white, late 2006), it was having the same symptoms as some of the others with the known random shutdown syndrome (RSS). Like many others I had thought it was the end of my macbook and the logicboard needed replacing because that is what the 'genius' people do, but I was still wondering what would cause it. It would randomly shut off! (or so I thought) I'd be typing in Safari, watching a youtube video, and even playing games, it would just shut off and I could hear the hard drive spin down. I'd restart and it would do it again sometimes right away, sometimes hours later.
This got me to thinking (like others have said) that it must be an issue with over heating. To test my theory I backed up my HD, and tried to reinstall Snow Leopard after zeroing the HD (as a fresh install). During the install process the Macbook's fan started to get loud and then it happened, it died again! So, this proved to me that it is NOT a software/OS issue at all, which means the said efforts in other posts of changing screen saver and energy saver settings had nothing to do with the cause! Aha moment!
I thought to myself... something is making it shutdown, obviously, and has to do with too much heat as the fan was going crazy even while reinstalling the OS. After reading many posts on different support forums I came accross the possibility that it could be the heatsink and/or sensor that is attached to it. I also found out that this "RSS" only applies to the non-unibody, core duo, and core 2 duo macbooks... you know what that means?
These models are the only ones with the shared memory and GPU on the same heatsink! GAH! A possible solution presents itself? To make a long post even longer... I removed the keyboard, carefully unscrewed the heatsink and fan and what did I see? Cracked and dried out thermal paste on the CPU AND GPU, they are both under the same heatsink after all, this was bad, really bad.
Luckily I had some Arctic Silver thermal paste in a tube from years ago when I upgraded my PowerMac CPU. Using some rubbing alcohol and a soft cloth I removed the crud on the heatsink, processor, and GPU (I might add that there was way too much paste on there in the first place). I waited an extra few minutes to make sure the alcohol evaporated, and then I applied a small (dime sized) amount of thermal past directly onto the two chips, I aligned the heatsink carefully and gave it a very small gentle push down onto the chips, reattached the sensor wire to the mainboard, and screwed the heatsink back in.
After putting the keyboard back on and making sure all screws were in... I immediately turned on the laptop and reinstalled the OS. The OS install took approximately 10 mintues! (crazy!) The last time I did that it took over 30 mins to install! I was stunned!
After the OS installed I let the computer idle and shut down, I let it sit for about an hour to allow the paste to contract as it cooled. After starting up again I immediately downloaded Temperature Monitor and installed it (I did have it running when my mac had RSS by the way), here are the results to prove my theory:
My Macbook with RSS:
CPU1 and CPU2 Idle temp - 114 degrees (F)
Heatsink temp - 128 degrees (F)
Approximate over heating temp - 184 degrees (F) (causing the heatsink sensor to shutdown the laptop)
My Macbook with new high quality thermal paste:
Idle temp of CPU1, CPU2, and GPU - 77 degrees (F)
Heatsink temp - 84 degrees (F)
Running temp with adobe CS4, youtube, and typing this message - 103 degrees (F)
Pretty amazing if you ask me!
Before I applied the thermal paste my Macbook took at least a minute to start up with a fresh OS install, now it only takes about 15 seconds! I have not heard the fan spin up and go crazy since! And I can't even explain to you how much fast it is now!
This does prove that Random shutdown syndrome (RSS) is caused ONLY by your GPU over heating due to old thermal paste between the chips and heatsink! A design flaw by Apple? probably not because thermal paste will crack and dry over time.
This also proves that energy conversion to data in the chips can decrease because of over heating, causing the computer performance to dramatically drop!
So before you take your out-of-warranty macbook to Apple or a repair shop, see what your internal temp readings are and try to replicate the problem with over heating your CPU/GPU! This was a 10 minute fix! I am still amazed at how much faster everything is, and haven't had a random shutdown since! I hope this helps alot of people that think they are out of luck and have to pay to get it fixed!
- Cory -

I too have this problem as well and it has been getting worse lately, I don't know what to do anymore. Here is a little info about my macbookPro. I have the late 2008 unibody model, i bought it in late 2009 Refurbished from Apple. Recently my mac has been turning off out of nowhere. I may be doing something and all of a sudden it just shuts off, it usually happens faster when i start to open up more programs like Photoshop or Final Cut Pro. My mac is out of warranty now and i dont know how much apple is going to charge me to fix it. i mean they want 50 bucks just to talk to them on the phone (ridiculous if you ask me)!.
    I have a temperature sensor installed and here is my data
CPU A Proximity: 126F
CPU A Temperature Diode: 133F
Graphics Processor Chip 1: 122F
Graphics Processor Heatsink 1: 113F
Graphics Processor Heatsink 2: 126F
Graphics Processor Temperature Diode: 131F
Left Palm Rest: 91F
Main Heatsink 3: 122F
Main Logic Board: 118F
Northbridge Chip: 127F
Northbridge Position: 124F
Here is more data from the Power
Battery Information:
Model Information:
Manufacturer:          GSA-1281
Device Name:          ASMB016
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          0
Hardware Revision:          0
Cell Revision:          0
Charge Information:
Charge Remaining (mAh):          3739
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          4610
Health Information:
Cycle Count:          68
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1766
Voltage (mV):          11793
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          90
Automatic Restart on Power Loss:          No
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          No
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Battery Power:
System Sleep Timer (Minutes):          60
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
PLEASE HELP ME, I CAN NO LONGER TRUST MY MAC FOR WORK. any replies will be appreciated. thanks

Report containing details of Payment released to Vendor -----PLS HELP ME

Hi All,
Pls Help me .
My client asking create new report.
they gave some fields also.
But, problem is my abap people asking which table will come data.
but i didn't have idea which table its take output.
pls help me
<<< Vendor Code >>>
<<< Vendor Name >>>
<<< Vendor Address >>>
<<< Vendor City >>>
Please find enclosed the details of payments released to you from << from selection date >> to << upto selection date >>
Document No
Cheque no     Date of Release
Vendor Invoice no
Vendor Invoice Passed for (MIRO Value)
PO no.
Basic Rate from PO
GR No.
Material & Description
Qty Invoiced (MIRO qty)
Qty Received (MIGO qty)
in above 4 feilds related to FI .
Pls help me what are the table can i give
thanks
supriya

hi,
select table ADRC:
sample (join with lfa1)
      SELECT name1 city1 post_code1 street
             INTO CORRESPONDING FIELDS OF ITAB
             FROM ADRC AS A INNER JOIN LFA1 AS L
              ON AADDRNUMBER = LADRNR
              WHERE L~LIFNR = P_LIFNR
               AND A~DATE_TO GE SY-DATUM.
or use one of the function modules from my 1st post
plz reward usefule answers
thanx and regards
Andreas

Random Shutdowns on a MBP Core Duo, Suggestions/Help would be great

I've had two random shutdowns of my mac since purchasing it back in August. The first happened on January 11th, when it said it was at 11-12% power. The second happened about two weeks later, at 23% power. I've been looking around these forums and other pages, and haven't really found anything that has helped so far.
Details of the first crash:
Open apps- Firefox (5 windows, two had about 20+ tabs open, the rest were single page, and yes, I know it crashes often with that many), Camino (1 window with 5 tabs), and Word 2004, as well as Quicktime open to the iPhone stream.
I had an USB key plugged in, to which I was saving my Word document.
So I was working in Word while in front of the TV and during an interesting bit, didn't do anything for a minute. So, like the many times earlier, it slept the display to conserve power (in "Better Energy Savings" mode). I moved my finger on the trackpad to wake it back up, and it turned back on the backlighting, and then stopped. I thought it had just went back to sleep, but after a few key presses and a check of the light that usually pulsates when it's sleeping (plus the USB key , I found out that the computer had turned off. I let it sit for a while, and when I plugged it back into AC power and turned it on, with my USB key still plugged in, and although it booted to my desktop, the Finder never started (so no desktop icons for anything), unplugging the USB key fixed this and everything returned to normal. I then installed the only update I was missing, one for iChat, restarted, and continued working.
In the second incident, I only had my browsers open, nothing external plugged in, and my displayed was dimmed to the third darkest level. When it was at about 23% power, it once again randomly shut down. This time, I attempted to turn it back on, and nothing happened. After plugging it into AC power, it turned on and once logged in showed a very low (2-6%) power, so I guess it was reporting the power incorrectly?
Anyways, went back to look at the battery exchange on Apple's website. I had checked before when they started it, and was pretty sure mine wasn't covered, and a second check confirmed that. My Mac's serial is W8618091VWX, which isn't covered by the recall.
So, I have a few questions:
1. Is there a toll-free number I can phone Apple (Canada) at? The only number I've found seems to be only free for those who bought their computer in the last 90 days, which I'm no longer covered by, and haven't been for a while. Talking to someone at Apple would be good.
2. Otherwise, if I took my computer to an Authorized Service Provider, would they be able to take a look at it and answer some questions? I bought my MBP at a London Drugs and they aren't service providers, so how much would it cost to do this?
3. Is there a definite cause for these random shutdowns? It seems to vary among other people, so it would be helpful if I could try something to eliminate one of the causes.
4. Does Tiger report battery levels pretty accurately? In the past when I reached 6% I got a warning and was able to plug it into AC power and had no problems.
Thanks for any help you can provide.
Macbook Pro 2.16 GHZ Core Duo, 15.4", 1GB RAM Mac OS X (10.4.8)

I had this problem of RSD fixed for a while after having had the battery replaced by Apple, till yesterday, when the MBP suddenly experienced a shutdown during a meeting presentation, while it was connected to the AC power. At the first restart, as coming back from a stop-mode, for a while appeared a warning of low-battery level, with battery level indicator flashing red and showing the empty icon but with a 86% of charge level and a new shut-down definitely put the MBP out of service, no way to have it functioning again. Obviously, AC power was OK, no problem with the microphone or the projector ( I was at the podium of an international meeting) and a lucky precaution ( double save of the same presentation on a friend's twin MBP, that worked correctly) saved the job.
Then, a couple of hour later, my MBP started up normally and everything works fine, with or without MAGsafe connected to AC power, almost up to now.
I've read the post with a link to the procedure for resetting the power controller chip on the mainboard, I'll do it in a minute, hoping that this will help.
Any further suggestion?
ambabu, Italy

Help - Thermal or Random Shutdowns

My MBP 15” is outside the warranty and developed what appears to be a thermal shutdown issue. After a period of time it just shuts down. When I restart, it shuts down again very quickly. Each restart results in a shutdown sooner than the last. If the MBP is left off for a longer period of time it will restart, but shuts down after 10 or so minutes.
Being out of warranty and being brave I dismantled it and found nothing outwardly wrong. However, the heat sink compound was pretty dried and cake-like. So I cleaned and replaced the compound and fired it up only to have the problem once again. The compound may have helped a little, but it is not statistically significant. I also pulled the battery backup wire while I dismantled the MBP. I am not sure if that erases the non-volatile memory or not.
The problem shutdowns occur with and without the battery installed. The only way I have been able to work around this problem was to install a third-party fan control program. I set the minimum fan speed to 2500 – 3000 RPMs and life is fine. I have not had a shutdown in the last two weeks since I installed the fan control program. That tells me that the thermal sensors are probably initiating the shutdown. I can’t say what they are measuring is real or not.
However, I can’t recall ever hearing the fans before the MBP shuts down. I hear them now with the fan program running, but I can’t ever recall hearing them before the install. Any thoughts?

Have you run something like iStat Pro... just to get an idea of what the temp sensor readings are? It's possible you may have just a faulty sensor... Something like iStat Pro:
http://www.apple.com/downloads/dashboard/status/istatpro.html
or Temperature Monitor:
http://www.versiontracker.com/dyn/moreinfo/macosx/19994
... will give you the reported temps of a number of components. If you have a faulty sensor... it should be easy to detect (for example, if your heat sink shows 120 C but both your processors show around 60 C and your other heatsink slightly lower... you'll know the first heat sink probably has a bad sensor). The first generation MacBooks had a problem with random shutdowns due to a faulty heatsink sensor. Apple was able to put out a firmware update that basically ignored the faulty sensor... but for those that had the problem, if they run one of the above programs... they can still see the faulty readings... only their machines no longer shut down as they are now ignored.
You should first determine your processor and heatsink temps... just to make sure you actually are not experiencing an overheat problem vs. just a faulty sensor.

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

My iphone5 was stolen.. pls help how to deactivate it? badly need your help..

My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Help me doing bapi related to catsdb only pls urgent step by step

Help me doing bapi related to catsdb only pls urgent step by step
thank you,
points will be rewarded,
Regards,
Jagrut BharatKumar Shukla

Help me doing bapi related to catsdb only pls urgent step by step
thank you,
points will be rewarded,
Regards,
Jagrut BharatKumar Shukla

Random Shutdown Because of Heat Sensors?

I bought my white MacBook in mid-May (week 19 production) and it worked fine with the exception of a whine when I did not have the iSight Cam on, the occasional mooing after using the computer heavily then using the CPU lightly for a while, and the discoloration. If you ask me it wasn't that much of a set back because this computer was fast and reliable... or so I had thought!
All of a sudden about a week ago, after I had the discoloration fixed, thanks to AppleCare (which only took 5 days), my computer shut down randomly in the middle of light usage...
At first I had thought that my external hard drive was the problem and I was very upset that this had happened. I tried to reboot my computer, but all that would happen was the usual DVD drive start up sound and then it would turn off again. I tried about 5 times to restart it with no luck, so I walked away. About 20 minutes later I was able to start it back up...
After not using my external hard drive for a day, it happened again, in the middle of normal internet browsing and listening to music it randomly shutdown. I thought that maybe it was an OS 10.4.7 issue, because I had not had any problems with x.6, so I erased and restarted from scratch, and once again, another MacDeath. Once again, I thought it to be my fault in my installation of 2Gb of RAM. I re-installed the custom 2x256 RAM that came with the computer ( and will remain in my hands forever, because you can't even pay someone to take away a stick of 256Mb RAM these days) well after the old RAM was forcefully shoved back in, it died again! This is when I started to get mad...
I put up with the whinning, I put up with the heat, I put up with the discoloration (for a while), but now this? WHY!
Over the next week it happened almost daily and sometimes when I would turn on my computer after it being off for at least 5 hours, it would load my home screen and after about a minute I would hear the fan come on for a few seconds, and then it would die again. I noticed that most times that my MacBook would shutdown unexpectedly, the fan had just turned on for a few seconds or I was playing a game and the fan was already on...
So today I called AppleCare and I had to wait about 30 minutes before I talked to someone... (When I called last time about discoloration, the wait was about 5 minutes) So either there are more and more angry customers calling, or Apple is firing employees to increase their stock value...?
When I finally got through the man told me that it was most likely not the Logic Board, but instead FAULTY HEAT SENSORS and/or FAULTY HEAT SINK APPLICATION. I won't lie I have seen Core Duo Temp show readings as high as 91 C (about 196 degrees F). I knew that this things got hot, but not so hot as to start a fire if left on too long....
So I am getting a box from DHL tomorrow (woohoo) MacB. and I get to part ways again, but this time, from reading many threads, I assume our time apart will be much longer approaching around 2 WEEKS!!!
All I hope is that AppleCare will fix the heat sensors that are supposed to shutdown the computer when it gets overheated.... I have to go to school in about a month and I will not have time to deal with these kinds of issues! I really like the MacBook and all of it's features, but I did not sign up to get a MacDieOnMeBook!
APPLE USE SOME OF THE 24% SALE INCREASE THIS QUARTER TO HELP YOUR LOYAL CUSTOMERS WHO HAVE BEEN WITH YOU THROUGH THE GOOD AND THE BAD!
MB 2GHz White 2GB RAM - 250 GB External HD Mac OS X (10.4.6)

As of yet i'm not exactly sure about the heatsink problem, although a few in here have reported machines that work well after having this part replaced, while others who only had the MLB replaced reported a recurrence of the problem.
as for the volume indicator, i noticed that mine did that too, but it was in fact muted whether or not the tool bar indicated it. i dismissed this as a small quirk, similar to when my volume indicator didnt change as i pressed the volume buttons on my old laptop. but so long as there was an acknowledging "squirt" noise on the computer indicating change of volume, that shouldnt be a problem.
good luck withyour MB

1.83 MBP laggy!! Random shutdowns..

Hi,
lately i've noticed my mbp has been laggy. It seems a lot slower than when I first bought it,which was about 3 months ago. Sometimes it also restarts itself when running norton's anti virus, copying a dvd, or anything that's lengthy.
At least 3 times an hour when I put my mouse over the menu (genie effect) it pops up and freezes there until I go over it again.
Internet seems slower, and it's still hot as heck. Fans have no humming bcus I don't even think they work!!! but i'm not sure. I never hear them, only on start up.
Any suggestions?
I have a small dent on the top shell casing, that's one reason i'm hesitating to bring it to apple.
Mac Book Pro 1.83 ghz. 2 gb ram 80 gb hd Mac OS X (10.4.5)

Been in your shoes. I have a 1.83 15" and had it do the same things you describe. First off, the ram I upgraded was bad. Apple pulled it out when I sent it back to them for random shut downs. Apple also replaced 7 parts including the logic board. While I wait for new ram to be replaced, I have not had as many random shutdowns with the base 512MB stick that it shipped with from the store. Did your system come with 2GB from Apple or was it an upgrade?
I did try converting a quicktime movie to my ipod via itunes and it heated up so bad it shut down. I also had it shut down while converting a file in compressor. Will try and compress a file with the stock ram and let you know if it was specifically ram related.
Have you run the diagnostic tests from the install DVD? Might tell you if the ram is bad.
Did you buy Applecare?
Andy

Macbook problems, hard drive crash, random shutdown, freezes

I bought my macbook used a few months ago, and it worked flawlessly until about 3 weeks ago. The system started freezing and not booting (getting folder icon instead of apple at startup). I ran drive setup and tried to repair the drive, but this did not fix the problem. DiskWarrior also could not fix it. I pulled the drive and installed a new hard drive, as I wanted a larger capacity anyways. All my problems appeared fixed for about two weeks, then similar problems began occurring. I backed up all the files I needed to an external firewire drive and attempted to reformat the new internal drive. Drive Setup says it can not reformat the drive - can't mount it and if it does, the drive disappears while in the process of formatting. I pulled the new drive and am having it replaced under warranty. I am using the firewire drive to run my computer, and this seemed to work fine for a day or two until the computer just started shutting down with no warning. Everything goes black, including the little light on the front of the computer. I have to hold down the power button for 10 seconds before it lets me start the computer back up. I had read this may be a memory issue, so I ran memtest and it says the memory is fine (I need to do it in single user mode still, however). I also tried pulling both sticks of ram. They are both 1GB crucial memory. I put each stick in by itself and tried it in both slots and was able to reproduce the shutdown issue with any ram configuration of either stick.
After all this, I realized the firewire drive was only running 10.5, so I updated all the software through software update, and it is now running 10.5.2. It seems to be working better as I have not experienced a random shutdown yet, but I'm anticipating it may start back up soon. Today, however I experienced a different problem - the screen froze on me and the only way to get anything to happen was to force a shutdown with them power button. It's restarted and seems to be working fine again for now.
I've run some logs and here's some things I've found:
When the latest freeze happened, I got this repeated over 100 times:
Apr 29 11:04:31 jon-turners-macbook quicklookd[536]: CGContextClosePath: no current point.
I've also seen this:
Apr 29 11:18:19 jon-turners-macbook kernel[0]: Previous Shutdown Cause: 3
Apr 29 11:18:19 jon-turners-macbook kernel[0]: GFX0: family specific matching fails
Apr 25 19:19:50 localhost kernel[0]: hi mem tramps at 0xffe00000
Should there be anything else I can check? I would run Apple Hardware Utilities, but I don't have the original disks, just the Leopard installer. I have Disk Warrior, but it seems strange this would happen with multiple systems and drives. I'd like to get Techtool Pro, but haven't had the money/time to order it yet.

Thanks for the replies!
Yeah, I think it's the HDD. I was just worried that the RAM was bad and corrupted the HDD or something, but given the symptoms I think you guys are right. Ordered a 7200RPM 320GB HDD off Amazon Prime...will be here tomorrow
I'll post how it goes after I finish installing it. I'm backing up as I type.
I wonder if I can fix the ir port and the sleep indicator light when I install the hard-drive. The sleep indicator light never turns off. It stays on as long as my computer is on, only turns off when I shut it down.

K9N Platinum: CPU upgrade = Random shutdowns..

I just installed a new AMD Athlon 64 X2 3800+ EE in my MSI K9N Platinum motherboard (MS-7250 v1.0, the 070 model according to the box). I had updated the BIOS to version 1.7 before installing the CPU. Anyhow, I got the CPU installed and it seemed to be running fine. Until I started playing my games. Upon playing fifteen (!!!) minutes of Day of Defeat, the system completely turned off. COMPLETELY. No error messages. I check core temp's log to make sure the CPU wasnt overheating; it wasnt. The max temp was 38C on one of the cores. Just to make sure the CPU wasnt the problem, I ran two instances of prime95 for 5 hours and there were no calculation errors whatsoever. I also ran 3-4 loops of SuperPi, using the 32M test. No errors.
I have come to the conclusion that it must be the motherboard, and possibly it does not like the CPU. Or else it is having the same random shutdown problems as many other K9N Platinum/Ultra boards are experiencing. From what i have read, this issue only relates to boards that are 040, 050, or 060 models. I have a 070 model, and I AM GETTING THIS PROBLEM!!
Help!!!
Full specs:
MSI K9N Platinum MS7250 V1.0, BIOS 1.7, model 070
AMD Athlon 64 X2 3800+ EE (old CPU: AMD Athlon 64 3500+; had no issues with the 3500+) vcore: 1.225
1 GB OCZ Platinum DDR2-800, 5-5-5-15, 2.1v
eVGA GeForce 7800GT videocard with Zalman VF900, 490/1220
Hitachi Deskstar 7K80 SATA HDD
LITE-ON DVD-ROM drive
Floppy drive
3x 80mm fans, 1 cold cathode
Antec Truepower 430 watt PSU, dual +12v @ 17A a piece.
Any ideas?

well, i know that ACPI has to do with power saving features.
http://en.wikipedia.org/wiki/ACPI
and HPET also has something to do with CPUs
http://en.wikipedia.org/wiki/HPET
and MCP55 is the nortbridge.
so i suppose i can conclude that it protects from overvoltage or promotes more power-saving? i dunno i really dont care as long as my PC works now,

Macbook won't detect external display anymore - Random shutdown injury??

Hi,
my Macbook has the dreaded random shutdown thing happening, often it can't even get through the startup sequence. If I reset the PMU and PRAM and check the disk every week I can keep it running. Applecare are making not particularly helpful suggestions like "run it in safe mode" - hello people, random means it can take days to happen again... I use this computer for work so I need it at full capacity every day!!!
Anyway, enough angry ranting. The casualty of today's RS and subsequent PRAM PMU resetting is my external display (Viewsonic LCD). The macbook is no longer sending signals to it (display says "no signal"). When I ask the macbook to "detect displays" nothing happens. I have restarted the macbook several times and unplugged and replugged the display connection it doesn't help. Yes, I have the AC power cable plugged in on the Macbook (I know it doesn't like talking to the screen if I don't).
The display and macbook have always worked fine together in the past...
Does anyone have any suggestions on how to test for causes or fix this display related problem?
MacBook Mac OS X (10.4.8)
Powerbook G4 Mac OS X (10.4.2)

You don't mention ever having brought the problem to Apple's attention, or what resulted from your request for Apple's help with it. This isn't a universal or widespread problem. It may be a hardware fault in your own equipment that needs to be resolved with a repair, or it may be a software problem (corrupt file, incompatible software conflict, update needed, etc., etc.). You seem to think Apple should have fixed it for you without your lifting a finger, and you're eager to complain about Apple's lack of support. But you've offered nothing to indicate that Apple even knows you need support. You do have to ask for it. Have you done so?
We have no idea what steps you've taken to try to narrow down the possibilities, e.g., making sure the monitor is turned on; trying a different video cable as iVmichael has suggested; testing the monitor with the same cable on a different computer; testing a different monitor with the same cable and then with a diferent cable on your computer; substituting a different cable adapter, if you are using one; applying all applicable system software updates and then Repairing Permissions and Repairing Disk; starting in Safe Mode and seeing whether the monitor is recognized and activated then; seeing whether the monitor is detected in System Profiler; and so on. You may have done some of these things, but you haven't told us about them or about the results.

Random shutdowns/related to bad RAM? pls help

Similar Messages

Maybe you are looking for