Random sound generated from external midi device even without a song opened... How to uninstall external control surfaces?

Recently bought systems used :
     Roland FA-08 workstation
     Mixingtable with USB connection Yamaha MG12XU
     Mac Os X 10.9.4 Maverick with Logic Pro X 10.0.7
for each system the latest usb-drivers are installed
Problem :
I get random noises generated (non-stop) from the connected synthesizer FA08 starting up Logic, even without a song opened.
(My midi local is switched of, that's not the solution)
The problem started (i think) installing the Mackie control for the DAW use as was suggested by the Roland manual
in Logic Pro X > Control Surfaces > setup...
Other than my remote control i now have Mackie controllers that i can not remove from the setup. Right click says 'delete' but
they are not deleted, the program even crashed once. Reinstalling Logic does not remove them either.
I read somewhere that there should be a 'controller rebuild'-command but that doesn't seem to exist.
And i have no idea why in the 'inspector', the host of the Mackie Control seems to be my I-pad (?)
I suspect that te problem is either some midi/usb driver conflict when used with Mavericks
or te use of the mackie controller conflicting with
the audio-bord of the yamaha mixing console MG 12XU (which seems to be working fine) or with the DAW controller of the FA 08
Audio/Midi setup of my computer seems to be installed correctly.
How can i uninstall this controller settings ?
Anyone has an idea why i get random noise generated?
Anyhow, it is impossible working with Logic this way..
Please help..

In case you need to get back the default Logic control surface setup you can delete the Control Surface preference file and the default file will be rebuilt. It's a good way to get back to Logic's initial control surface setting. Also, if you had chosen to edit the Logic Remote CS entry instead of remove it there are adjustments that can be made, like disabling Active Sensing, or even disabling "Flash Mute and Solo Buttons" on the basic Control Surface Preferences pane.
Deleting the Logic 10 Control Surface Prefs.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Delete the com.apple.logic.pro.cs file from the preferences folder.
Note: to get to the User-Library the tilde ~ has to be included. ~/Library/Preferences

Similar Messages

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

External MIDI device, can't get more than one sound, Logic Express 9 & Korg N364

Hi, I just beginning to use Logic. I trying to get Logic Express 9 to work with and use my Korg N364 keyboard/workstation as an external MIDI device. I can only get one sound at a time even though I create multiple tracks and assign different programs (or patches) to them.
Each time I do the following: I add a new external MIDI track, change the Channel to new number, put a check in the Program box ( as well as the Volume & Pan), and choose a instrument or patch from the Program drop down menu. What happens, though, it changes the sound to that instrument alright, but ALL THE PREVIOUS EXTERNAL MIDI TRACKS HAVE THE SAME SOUND NOW. I've followed the tutorials I found on the web and it seems like I'm doing everything correct in Logic. I hooked up the MIDI cables, added a new device and connected virtual cables in the MIDI studio window of my Mac OS, and have added the proper Korg multi instrument in the environment window of Logic and "un-slashed" the 16 channels. I get the sounds from the Korg no problem, it's just that I can only assign one sound and no more to the external MIDI tracks. Is there something in my Korg I need to do? Or am I missing something in Logic?

It's not Logic, it's how you have the Korg setup.
I'm not familiar with that model but it is a workstation so I'm pretty sure you can set it to a "Multi" mode.
Right now you are running it in single patch mode.
In single patch mode only one sound is available on a single MIDI channel, your Korg probably has a Multi or Combi mode, this is where multiple sounds can be played, each sound has to have it's own MIDI channel.
You will need to set this up on the Korg first.

Stuck notes from external midi device

I just started using Logic today for the first time. I hooked up a MOTU midi express XT as an interface between my MacBook Air and a Proteus Orchestral synth (old rack model). Also hooked a FATAR keyboard (controller) to the interface. Everything shows up fine in the audio / midi setup windows. I was able to figure out how to set up several tracks in Logic pointing to the multiple channels on the external midi device (synth). So far, so good. But when I started recording the tracks I ran into stuck notes from the synth. I've had this in the past on other sequencing software and don't remember how to solve it? In addition, while recording the tracks from my keyboard controller notes would occasionally not play, almost like there was a memory / cpu problem.
Any thoughts would be appreciated.

In case you need to get back the default Logic control surface setup you can delete the Control Surface preference file and the default file will be rebuilt. It's a good way to get back to Logic's initial control surface setting. Also, if you had chosen to edit the Logic Remote CS entry instead of remove it there are adjustments that can be made, like disabling Active Sensing, or even disabling "Flash Mute and Solo Buttons" on the basic Control Surface Preferences pane.
Deleting the Logic 10 Control Surface Prefs.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Delete the com.apple.logic.pro.cs file from the preferences folder.
Note: to get to the User-Library the tilde ~ has to be included. ~/Library/Preferences

How can I control external MIDI devices from my PXI Real-time system?

I am trying to implement a psychoacoustic experiment using an external MIDI device that can be used to shift the pitch of a speaker's voice.
I have a 8176 controller in a 1002 chasis with the 6052E IO card. I would very much prefer to run the system in real-time mode (rather than win XP), and need to control the MIDI device through one of the interfaces on the controller.
Any suggestions?
Thanks in advance,
Frenk

Hi Frenk,
one way would be an analogue to MIDI converter.
There are some out there (ask for music equipment)which can convert an analogue signal to some MIDI controller signal. This way you could control the pitch shift with an analogue output of the 6052 in realtime.
Hope this helps
Regards
Stephan

PDC & External Midi Device Delays

Hi All,
Got my head around the PDC - i think , but -- Logic states that :
' Another effect with delay compensation set to All is that MIDI tracks triggering external sound modules will be out of sync. This is because Logic has no direct control over the audio output of external devices. A possible solution for this would be to route the audio outputs from the external MIDI devices to inputs on your audio hardware and monitor them through Logic. This way, the audio streams from the MIDI devices can be compensated during playback. Using Logic's External instrument to route MIDI to your external devices is an ideal way to work in this situation. '
Question : So what would you do if all of your inputs were being used from other sources ( Hardwired / or even if you had only 2 ) or you did not have enough inputs to cater for simultaneous internal monitoring from your midi gear- ( phew big sentence ! ) but still need the ALL setting for PDC selected because of the induced latency from plugins . How can you compensate for the external midi delay in the new logic 7 if you cant monitor internally as they suggest ? This was not the case in version 6 and i am pretty worried my clients projects will all now play out of time ! Hope i explained correctly and you understand my question. Please dont say bounce them !!
Thanks and look foward to youre suggestions

Presumably, all you would need to do is have a stereo submix of your external MIDI gear coming up on a stereo input object (software monitoring on, obviously.)
The whole submix would therefore be PDC-delayed as necessary to match up with the rest of the audio, and you could bounce (real-time only of course) to include all your external instruments in one go.
What I do is have all external hardware coming up in a mixer (Mackie 1604-VLZ), so you could record individual channels of submixes back to the computer as necessary.
However, the best solution for most cases is to record your external MIDI gear as audio, which is what I do when I've finished editing, keeping the MIDI tracks just in case.
This is also handy as you can process with internal FX, automate and offline bounce, and don't need to worry about having all the hardware when you open up the song in a couple of years. (Although you should keep sysex dumps etc as well, obviously...)

Monitoring 2 External Midi devices at playback

Hi, I'm a "Newbie," I have a MAC G5, Logic Express 7.1, a MOTU 828
(first generation) and 2 external midi devices (Triton Extr, and a Roland JV 880) I
can only monitor one of the devices at a time at playback - wichever channel
I have chosen in the MOTU preferences.
I know it was a challenge to set up Cubase to monitor both at the same time.
Is it possible in Logic Express?
Thanks for any help that might be had out there!
Borgy

Couple of things I don't understand about your question.
Are you running Vienna Ensemble on a separate computer? If not, why not use it as an AU plugin? If you have it installed on the same computer as Logic there would be no need to treat it as an external instrument. If you are running it on a separate machine double check the audio and MIDI hardware connections, drivers for both interfaces, Apple Audio/Midi Utility settings, environment, and finally the settings on your ext instrument (in the track.)
You mention being unable to hear VE when bouncing, but then you also mention that there is no signal from those tracks showing on the master fader. Is this specifically a problem when bouncing, or are you basically unable to hear and see signal from your VE tracks while recording, playing, mixing?
If VE runs smoothly from another computer (presumably to ease the burden on your main cpu) and you are able to hear it and see it at the master outputs just as you expect, and you ONLY have a problem when bouncing, then your solution is simple. Make sure that you bounce in "realtime" mode when including external instruments or fx. "Offline" mode will not include them.
Sorry if I'm covering stuff you know and have already tried; hopefully some portion of this info will help you.

Mixing when using external midi devices . . .

Hi,
This is the first time I'm mixing a project using an external midi device. Formerly, using an older version of DP, I would record each track from the midi device into an audio track before mixing because those tracks don't "bounce" when mixing. Anybody here who uses external devices do it differently?
Thanks, josf

Using the external I/O plug in you can bounce your external midi instruments to audio tracks in realtime in logic, but you have to add the New multi instrument in the environment so that it can be represented in the external destination parameter of the EXternal I/O plug in.
At least I think this is how things work. You also need an audio interface with the outs of your hardware to the ins of the inputs and the midi cables configured.
But.. I think there is a latency issue there.. anyone know how to compensate for this? Like if I bounce a track in realtime in logic.. it records the time that it takes the audio to "get into" the software.. It never bounces a track right on the beat, as if I were to bounce a track from say the EXS sampler.. When I do it inside logic it bounces it right on the beat.. with no "dead space" beforehand.. but if I use external equipment there is always a lag.. any suggestions?

Is it possible to use Garageband in conjunction with external midi devices?

We want to set up a music project for people with disabilities, using Garageband and various external midi devices, such as a 'Roland' keyboards, 'Alesis' AirFX, 'Alesis' SynthFX, soundbeam, 'Norton' sound sequencer etc.....is it possible?? We have used all this equipment with 'Steinberg Cubasis' software, but now want to try it with Garageband if it is possible!! Help?????!!!

daveandgit wrote:
I'm guessing that as we're using a midi to usb interface, it would work with Mac anyway??
as long as the inteface is mac compatible, yes
daveandgit wrote:
Also, would using an 8 or 16 channel mixer unit work to increase the amounts of tracks playable??
audio and MIDI are seperate things, and wouldn't help on any computer with any MIDI interface. for GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#maxnumrecordabletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Using an external Midi device to trigger an e.g. EXS24 Sampler

Hi
Firstly I have only used the EXS24 Sampler as an example with regards to what I would like to trigger - I basically want to find out how I can use an external Midi device to trigger anything other than the crappy sounds that Logic offers as an immediate option - I have some great soft synths like NI's "Massive" "Kore" and plenty of others that I would love to be able to trigger with my external Midi device however I can not figure out how to do this - Can any one help or advise???
Any help/info is welcome
All the best,
Al

Thousands of dollars spent on software (presumably) and you can't take time to read the manuals?
I don't understand how you can load the EXS24 and can't figure out how to do same with any softsynth.
Urrrgghh..

Deperately need help setting up external midi devices

I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
Heres my Audio Midi Setup window for reference.
Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

Recording from a MIDI device

Hello,
Is it possible to record from a MIDI device? I connected my keyboard via an M-Audio USB UNO interface. I used MIDI-OX to confirm that my Windows XP PC was able to input and output a MIDI signal. But I do not see a MIDI input option in Soundbooth's Record dialog box. And when I check audio levels, nothing shows up in the dialog box. I checked my Recording Control dialog box and MIDI/Synth is selected.
Jeff Sengstack

I think you need Adobe Audition. Soundbooth I believe is strictly Audio waveforms capable.
http://www.adobe.com/products/audition/?promoid=DJDVV
check out the link above.

How to put External MIDI Device on REC and also REC audio sources?

Hi,
I'm new at Logic 8 and i'm having trouble urderstanding how to put an external MIDI device on Rec and still record other Audio tracks.
I created an External Midi device in the Environment and created a midi track and a audio track for the device, so far so good, it all plays well.
But when i try to record the device at the same time as other audio tracks the midi device records but the audio does not, and i can listen to the audio that is getting in but Logic doesn't record anything.
Another thing that i cant understand it why i can only trigger the rec on the external midi device if it is selected?
Regards,
Herculano

After enabling "record" (R) hold down shift and select all tracks you want to record to. You can either do this in the Arrange or in the Mixer section

Hi, I have a sonar like sound emitting from my phone every minute. Please tell my how I can stop this

Hi, I have a sonar like sound emitting from my phone every minute. Please tell my how I can stop this

You're going to need to figure out what application is making the noise. Start with whatever ones you've added recently. Check their settings. Or, just delete the recently added apps. You can always add them back later.

I want 2 put music from cds on another ipod without the songs being in my..

I want 2 put music from cds on another ipod without the songs being in my library. Sorry it cut me off on the title. I want to import songs to put on my brother's ipod, but when I try to delete the song from my library it deletes it from his too. Help?

If you want to delete content from your computer but keep it on the iPod (so that is not deleted next time you connect it to iTunes), you need to set that iPod to manage the iPod content manually.

Random sound generated from external midi device even without a song opened... How to uninstall external control surfaces?

Similar Messages

Maybe you are looking for