Random text appearing as bold when creating PDF from Photoshop CS5

Hi I am a relative newcomer to Photoshop CS5. I have been creating a document with a background image layer and a couple of text box layers. The font is set at Arial, italic, sharp. When I save the document as a PDF file, random words appear in bold. I have tried deleting these words in the PSD document text layer and retyping them but they still appear as bold in the PDF file. Interestingly when I save as a JPEG image the bold words appear as normal. Any ideas/ tips would be greatly appreciated. CS5 version is 12.0.4 and OS is Windows XP.

Hi have worked out how to create jpeg screenshots - attached

Similar Messages

  • When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

    When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
    Any help with getting the TOC heading entries as hyperlinks?

    Try to do it from Word using the ribbon.

  • Acrobat 9 Quits When Create PDF from Scanner Selected

    Hi. I wonder if anyone can advise please.
    I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
    I have tried the following:
    1. Troubleshoot System Errors & Freezes
    2. New User account
    3. Recreated Preferences
    4. Booted from separate disk
    5. Repaired disk permissions
    6. Have no third party plug-ins installed
    7. Have run Repair Acrobat
    8. Changed Universal Access
    9. Defragmented disk & repaired files
    10. Safe Boot and reinstall Acrobat
    Nothing has worked except when I clean install I can scan through Acrobat once.
    I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
    Thanks for your help people.
    Regards
    Paul

    After I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
    I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
    On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
    I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
    I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming.

  • Document size changes when creating pdf from jpeg

    When I create a pdf from a jpeg file, the document size increases considerably. The native jpeg was saved in the "save to web" feature in Photoshop. I cannot find settings in ImageReady or Acrobat to make my document the correct size. Any suggestions?

    Why not save the PDF from Photoshop directly? This gives full control
    over compression settings. It will not, however, downsample so you
    should do that first.
    Aandi Inston

  • TOC not updating when creating PDF from Robo9

    I have not really created PDFs from Robo before, so I might be missing something basic. I am trying to create Word and PDF documents from my Robo9 project. My problem is that some of my topics are not being generated, in either the Word output or the PDF output. The topics are indeed part of the TOC in the Robo project, but they are not part of the TOC in the Word and PDF output. The strange thing is, all of the TOC books make the conversion, but the one book I am having the issue with includes one topic, but all of the other topics in that book do not get converted. I tried recreating the TOC, and it still does the same thing. It's almost like the printed documentation generation is ignoring any new changes to the TOC, as it's the same every time no matter what I change. I tried making some changes to topics that are generated, and I can indeed see the changes in the printed output docs.
    Anything glaring I am missing, or should try? Thanks.
    Mark

    Likely a common misunderstanding.
    The first time you create printed documentation, the topics are based on the TOC. Thereafter there is no link.
    When you add new topics to the project, they are not automatically in any of the TOCs. You have to add them to each TOC. It's the same with print, you have to add them in the print layout.
    Easiest way is to simply use the double left chevrons to remove the topics in the print layout and then use the double right chevron to back in, the difference being it will add all the topics in the TOC and as you added the new topics there, they will be in the print layout.
    There's more in Printed Documentation on my site.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Acrobat 8.1 Crashing when creating PDF from webpage

    www.sec.gov/Archives/edgar/data/910569/000091056909000016/form6-k15june09.htm
    I have been trying to create a PDF from the above URL using Acrobat 8.1 using the "Create PDF from Web Page" function.  The Download Status form opens and shows the progress as files are downloaded and converted.  However Acrobat 8.1 always crashes before completing the task.  Acrobat 5.0 successfully completes the task although the formatting leaves a lot to be desired but that's another issue.
    I've tried various values for settings such as processing 1 level or getting entire site but the crash is consistent.
    I have also tried a couple of other machines in the office with the same crashed result.
    Can anybody suggest why Acrobat 8.1 would fail to render this URL into a PDF and what would cause it to crash so consistently?  Is there an alternate method of creating a PDF from this URL aside from loading it into Word and printing to a PDF?
    Any clues appreciated!

    The problem is likely that the web page does not conform to standard HTML. AA8 crashed on me also. You can print the file from your browser. The only thing that would be missing would be the 3 links near the bottom and they are easy to add.

  • How to not include the path when creating pdf from many html files?

    I use "Merge File into a Single File" to create a pdf file from many html files. However, the generated pdf file have the path information of the html files. I'm wondering how to generate a pdf without the path information.

    Go to CREATE > Create PDF from Web Page > Click the SETTINGS button on the dialog that follows > Uncheck "Place headers and footers on new page".
    Thanks!

  • Corrupt image formatting when creating pdf from embedded visio image in MS word

    Hello, Using Adobe Acrobat 9 standard and trying to create a PDF file from an MS word (version 2003) document.  PDF file created is fine except for an image (embedded visio diagram imported into word).  When created in PDF, the image is missing many of the diagram labels, and other text boxes are in the wrong font and wrong location.  I don't know if it's my Adobe Acrobat or MS Word settings that need to be updated.
    thanks, NB

    Dear fellows,
    the problem is still present.  My system:Windows 7 32-Bit Prof, MS Office 2010 Prof, Acrobat X Pro 10.1.1, Vision 2010 Prof, all updates installed.
    Problem #1: Even the latest Acrobat X 10.1.1 version causes Visio 2010 to start with error messages, origin: the Acrobat Add-In.  Therefore I de-activated the Acrobat Add-In, again, as in the past.
    As I design grafics with Visio 2010, I mark them in the active Visio window, copy the marked parts and then insert them into my Word-Document.  So far, so good and as I want it.
    The (still present) problem: I can produce a PDF file using the "save as Adobe PDF", but the Visio drawing is incomplete and corrupt.  E.g. arrows as line endings have disappeared.
    PS: But using Adobes PDF printer sets the embedded Visio drawing correctly!  But using the printer one looses some features of the "save as Adobe PDF" command.
    Well, probably one day ...
    Regards,
    Rückenlehne.

  • Adobe Acrobat XI crashes when creating PDF from webpage.

    I need to create quite a few pdfs from webpages and all of a sudden, after being completely functional, my Acrobat has begun crashing nearly 100% of the time when trying to do so.  I'm defining crashing as either completely crashing ('...has stopped working...') or freezing indefinitely, forcing me to Force Quit.  It may be worth mentioning that I am using the Mac version.  Any ideas?

    The problem is likely that the web page does not conform to standard HTML. AA8 crashed on me also. You can print the file from your browser. The only thing that would be missing would be the 3 links near the bottom and they are easy to add.

  • Page size error when creating PDF from Excel 2013

    Hello,
    I am using Acrobat Pro XI, and am creating a PDF from Excel 2013.  I have updated Acrobat to the latest version (11.0.4).  I am using the Acrobat CreatePDF add-in inside Excel to convert a spreadsheet to PDF.  However, when I create the PDF, the page size doubles from 8.5" x 11" to 17" x 22".  I have checked the print settings inside Excel to insure that the content fits onto an 8.5" x 11" page.  I also checked the Preferences->Advanced Preferences of the Create PDF add-in and confirmed that the default page size is set to 8.5" x 11".  Does anyone know why it is creating the PDF with a 17" x 22" page size?  Also, can the page be resized back down to 8.5" x 11" within Acrobat Pro XI? 

    Hello - this did not happen when I printed the file to the Adobe PDF printer.  It correctly sized the sheet as 8.5" x 11".  Thanks for the suggestion.  Also, it will properly print out to the physical printer. 
    The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online.  I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. 

  • Unwanted blank pages inserted when creating pdf from scanner

    Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page  being scanned.  So, if scanning 50 pages, we get 100, etc.  How do we remediate this problem?  We have worked with the default settings, to no avail.  We're using a Fujitsu fi-5530c2 scanner.  We would appreciate any input to help resolve this issue!  Thanks Mark

    Hi,
    you can automaticaly fix previously made documents using the Preflight tool.

  • Unusual error when creating PDF from Excel

    2 of my work computers started suffering from this 1 week ago in Excel 2003.
    All create buttons and dropdown menus work, the creation process goes through progress bars and such.
    At the end, an error box titled Acrobat PDFMaker displays this error;
    "An error occurred while saving the file. Please check if there is sufficient space in the temporary folder."
    It's Acrobat 8 and its been updated to the highest level for quite a while. No settings have been changed.
    Running on Windows XP Pro. PDF creation has worked fine before this.
    It still works fine on Word.
    The error is not on Google or here, so I assume I'm the first to ever get it!
    There's at least 40 GB free on the drives. I cleared the system temp folder for kicks, but no change.
    I did a generic uninstall and reinstall on one computer, reapplied updates, but error still pops up.

    Hello - this did not happen when I printed the file to the Adobe PDF printer.  It correctly sized the sheet as 8.5" x 11".  Thanks for the suggestion.  Also, it will properly print out to the physical printer. 
    The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online.  I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. 

  • Error message when creating PDF from Indesign and Photoshop

    Hi, I reinstalled my Adobe CS2 product, and now get an error message each time I create a PDF from either InDesign or Photoshop. The message reads:
    The instruction at "0x0045c9e5" referenced memory at "0x0215ebdc". The memory could not be "read".
    I appreciate any help in resolving this issue.
    Thanks --Alex

    How do you create the PDF? There are multiple ways and it might make a difference.

  • Attach multimedia content when creating pdf from webpage

    Hi,
    I'm trying to createa pdf of a webpage which has several links to other pdf files.
    At the moment I can create the pdf and either embed those linked files, ignore them or create the pdf and just link to those files from it.
    I'd like to be able to grab those files during the create pdf stage and store them in a folder relative to the pdf document I'm creating.
    The links within the document would then point to these grabbed files.
    This seemed a lot simpler before I wrote it down!
    Is this possible?
    John

    The problem is likely that the web page does not conform to standard HTML. AA8 crashed on me also. You can print the file from your browser. The only thing that would be missing would be the 3 links near the bottom and they are easy to add.

  • Printing PDFs from Photoshop CS5 creates unworkable miniature files

    I work on Photoshop CS5 files and print them to pdf all day long with no trouble, most of the time. Occasionally however I complete a file in Photoshop and print to pdf and the file outputs as some kind of completely unworkable miniature. Very small file that fits in a tiny corner of the canvas size it should occupy. Once this occurs I must reboot my computer 3-4 times before the print to pdf features returns to normal function.  Today this happened on two separate computers almost simultaneously after I switched over from one to the other to get this job out and it occurred to me it might have been the actual file I was working with. Corrupt or something. The I tested some files that had worked in the past and they too went "miniature".  When this happens I save as pdf just to get the job out. While this works, the saved pdf is always a much larger file than the printed pdf version, with completely similar resolution quality. I love my print pdf feature, but it seems to have developed a little occasional psychosis in version CS5 and I was wondering if anyone has a fix up their sleeve, or can tell me what setting I am accidentally activating to make the output so tiny. It's pretty frustrating.
    Hans Matthes

    I advise you to contact Adobe Technical support through phone
    or you may also refer the acrobat user forums posted on adobe.com
    website

Maybe you are looking for

  • How to print Crystal Report within SAP Portal iView?

    Hi All, We are using BOEJ XI 3.0 with integration with SAP NetWeaver Portal.  We are having a problem with printing a Crystal Report. - We use the SAP iView to run a Crystal Report. - Once the report is completed, we want to click on Print to send th

  • "Extra" Internal Hard Drives won't mount - swap, /, and /home work.

    Hello All, *** I'm updating my post finally. Sorry it's so long, I'm not entirely sure what is and isn't relevant. *** Also I think it's a mix up with RAID causing the issue, as I'll address below, but in case I'm wrong I wanted to include the other

  • ITunes library on a flash card?

    Currently, I have my iTunes library on an external hard drive hooked up to my old MacBook which I'm trying to set up as a media server for the house (using Home Sharing).  In the meantime, I have no iTunes on my MacBook Air, and it's frustrating me. 

  • CO-product configuration in REM scenario

    I am trying to configure co-product scenario with REM process. Is it possible? If any one worked on this scenario please let me know what are the special consideration we need to take or any SAP note available? Thanks in advaice. Rajesha Vittal

  • Mask Crop Effect Working in Preview, but Not Rendering

    Machine: iMac Version: Premiere Pro CC 2014 - Updated this morning (1.27.15) Editing an interview where the camera operator shows up in a reflection.  To fix this, I grabbed an earlier shot without the camera person in that spot, looped the frames, p