Random users receive an unexpected error when trying to access SharePoint 2010 farm.

Over the past few months we had occasions where established users trying to connect to my production SharePoint 2010 farm receive a correlation error page when trying to access the farm. I have two WFEs load balanced and the errors show up on either so it
doesn't happen on just on or the other. Specifically today it was three users in one office out of about 15 that were affected the rest were able to access the farm without any problems and there were no other reports from other offices. Each time the
user can eventually get in without any outside intervention it just seems to fix itself after a few hours. Each time it happens I search the logs for the CorrelationID(s) and everytime I see the same set of errors in the ULS logs. I also go check the Windows
Security logs to make sure they connected to the server okay. I've confirmed that the Web App's PortalSuperUserAccount and PortalSuperReaderAccount are both set correctly. Just looking to see if anyone has experienced this and figured what was happening and
how to fix it.
These are the log entries:
Name=Request (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)
Begin Query the AD to get the user email and display name.
End Query the AD to get the user email and display name.
Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=29.4404440877166
Leaving Monitored Scope (GetWebPartPageContent). Execution Time=29.6140602113035
Site=/
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=30.6330444222452
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
PortalSiteMapProvider was unable to fetch current node, request URL: /SitePages/Home.aspx, message: Object reference not set to an instance of an object., stack trace:
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonEle...
...v, Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_CurrentNode()
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_metadatanavtree_ascx': Object reference not set to an instance of an object.
Setting [Display] as the FormContext.FormMode for the current page
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
PortalSiteMapProvider was unable to fetch root node, request URL: /SitePages/Home.aspx, message: Object reference not set to an instance of an object., stack trace:
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, ...
...Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_TryGetRootNode()
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
PortalSiteMapProvider was unable to fetch root node, request URL: /SitePages/Home.aspx, message: Object reference not set to an instance of an object., stack trace:
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, ...
...Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetRootNodeCore()
Exception in SearchBoxEx::CreateChildControls:System.ArgumentException: Requested value '/sites/search/Pages/' was not found.
at System.Enum.Parse(Type enumType, String value, Boolean ignoreCase)
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaultsInner(PortalWebSiteMapNode rootWeb, SPSite site)
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.<>c__DisplayClass2.<GetSiteDefaults>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated...
... secureCode)
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaults()
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.CreateChildControls()
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
Failed to create a custom control 'PublishingSiteActionsMenuCustomizer', feature 'Publishing' (id:22a9ef51-737b-4ff2-9346-694633fe4416) using attributes (ControlSrc='', ControlAssembly='Microsoft.SharePoint.Publishing,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', ControlClass='Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer': System.Reflection.TargetInvocationException: Exception has been thrown
by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElev...
...atedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.WebControls.CombinedBasePermissions..ctor()
at Microsoft.ShareP...
...oint.Publishing.WebControls.ConsoleVisibleUtilities.get_CanShowSiteActionsMenuItems()
at Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer..ctor()
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
--- End of inner exception stack trace ---
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at Microsoft.SharePoint.Utilities.SPUtility.CreateServerControlFromAssembly(String sControlAssembly, String sControlClass)
at Microsoft.SharePoint.SPControlElement.BuildCustomControl(TemplateControl tctlPage, String sControlAssembly, String sControlClass, String sCon...
...trolSrc, XmlNode xnElementDefinition, SPFeatureDefinition featdefElement, String sElementId)
at Microsoft.SharePoint.SPCustomActionElement.BuildCustomControl(TemplateControl tctlParent)
at Microsoft.SharePoint.WebControls.FeatureMenuTemplate.CreateChildControls().
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at M...
...icrosoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri uri)
at Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext()
at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web...
....UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Leaving Monitored Scope (Request (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)). Execution Time=78.9268136821824

Hi LonF1,
For solving your issue, please try to update the SuperUser and SuperReader per the article below:
http://technet.microsoft.com/en-us/library/ff758656.aspx
$wa = Get-SPWebApplication -Identity "<WebApplication>"
$wa.Properties["portalsuperuseraccount"] = "<SuperUser>"
$wa.Properties["portalsuperreaderaccount"] = "<SuperReader>"
$wa.Update()
If this issue still exists, please feel free to let me know.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Similar Messages

Portal Error:Unexpected error when trying to access gatewayed content.

hi friends...
Am encountering a Portal Error: Unexpected error when trying to access gatewayed content.
this error generally occurs on click on submit buttons..
occuring on my test portal only....
kindly help m resolve this issue...

After some research I found the following tip to be working:
https://discussions.apple.com/message/25038447#25038447
So I changed my IPv4 as well as IPv6 DNS-Servers under Windows Network Preferences and everything worked again.
HTH
Christian

Login error when trying to access iCloud Mail

I am receiving the following error when trying to access iCloud Mail. All other iCloud services are functioning.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: MAIL in main()
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.User object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <-- Response 2: 0 (72ms), headers:   body: (empty)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1030
initialized: true
name: cloudos-statechart
current-states: [
    active.springboard.displayingSpringboard.springboard
state-transition:
    active: false
    suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 10 2015 07:40:01 GMT-0500 (CDT)        (1425991201489)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
103705688
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: MAIL in main()
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.User object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <-- Response 2: 0 (72ms), headers:   body: (empty)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: Bootstrap error: Preferences.RefreshError

After activatin iCloud, my dotMac account wouldn't retrieve mail anymore. It kept saying that my username or password were not good. No matter how many times I tried, I couldn't restore the service.
Here's how I got it working again.
Apparently my 6 letter password is no longer acceptable. You need to update it to an 8 letter password that includes numbers and capital letters.
So I went to https://iforgot.apple.com and asked to reset my password.
Because I could still get my emails logging into iCloud with Safari, I responded to Apple's email, and created a stronger password.
Than I updated the passwords on my computer's Mail program, iPhone, and iPad (and of course everything else, iTunes, etc.).
That was it!
Everything works as normal again, I even was finally able to synchronize calendars over different computers again.
Try it out, it could be your issue as well.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I am receiving an A12E5 error when trying to install my Creative Cloud desktop

I am receiving an A12E5 error when trying to install my Creative Cloud desktop. So I cannot proceed to a free trial. Thoughts?

Hi UniversityDesigner,
Welcome to the Community!
Please go through this thread: http://forums.adobe.com/message/5581753#5581753
Thanks!
Ankit

FireFox keep saying "unexpected error" when trying to print web pages.

FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
Please email me on what to do to get FireFox to work.
I don't see anything in the FAQ that might help me.

Hi,
Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

Error when trying to access a form through https

Hi,
I'm facing this error when trying to access a form through https, i'm using OAS10g 10.1.2.3 over linux, it has webutil configured and is working perfectly with https
I'm accessing the form through webcache.
the error:
Java Plug-in 1.6.0_37
Usar versión JRE 1.6.0_37-b06 Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Users\Carlos
c:   borrar ventana de consola
f:   finalizar objetos en la cola de finalización
g:   liberación de recursos
h:   presentar este mensaje de ayuda
l:   volcar lista del cargador de clases
m:   imprimir sintaxis de memoria
o:   activar registro
q:   ocultar consola
r:   recargar configuración de norma
s:   volcar propiedades del sistema y de despliegue
t:   volcar lista de subprocesos
v:   volcar pila de subprocesos
x:   borrar antememoria del cargador de clases
0-5: establecer nivel de rastreo en <n>
cargar: clase oracle.forms.webutil.common.RegisterWebUtil no encontrada.
java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
cargar: clase oracle.forms.engine.Main no encontrada.
java.lang.ClassNotFoundException: oracle.forms.engine.Main
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.engine.Mainwhat could be the reason it can not find the webutil libraries with https ?? i tried erasing the java's cache but still the same error :(
Regards
Carlos

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Unspecified error when trying to access Control Panel

I am currently setting up Remote Desktop Services on Server 2012 and I have enabled the policy
"Prohibit access to Control Panel and PC settings".
When a user clicks on the Control Panel icon, or anything else that points to Control Panel (Screen Resolution, Personalize) they get the normal error of
"This operation has been cancelled due to restrcitions in effect on this computer. Please contact your system administrator" which is fine and is expected, but they then get the error,
"Unspecified error".
Does anyone know how to fix this?

Hi Tom,
Have you enabled the option to display "Personalization" in Group Policy?
This is because "Personalization" option is linked to Control Panel, so if you prohibit access to control panel, and right click on the desktop select "Personalize", it results in the "Unspecified Error".
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/76c3f7aa-9189-461e-be4d-5d8af133b151/windows7-explorerexe-generates-unspecified-error-when-trying-to-access-personalize-in-display?forum=winserverGP
Regards,
Gopi
JiJi
Technologies

HTTP error when trying to access RESTful web service from application

Hi,
We are getting the following error when trying to access a RESTful web service coming from Apex workspace 4.2.1 and Apex listener 2.1:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-29024: Certificate validation failure
In the Debug report, besides the above I also see:
error_backtrace: ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 543 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 1164 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 396
We get that error whether we use https or http in the URI pointing to the web service. When I test the Web Service in Workspace RESTful service GUI, I get the data back. When I go build an application with a report calling the RESTful Web Service I get that error. Both the Application and the Workspace RESTful services are on the same Apex environment and even the same workspace.
What is odd is that I can actually put the URL of the web service into a browser and I get the data: (using the demo hr data in sample RESTful services.)
IN browser-- https://weblogic-dev.edu/apex/ace/hr/empinfo/
yields:
7839,KING,PRESIDENT,,1981-11-17T05:00:00Z,5000,,10 7698,BLAKE,MANAGER,7839,1981-05-01T04:00:00Z,2850,,30 7782,CLARK,MANAGER,7839,1981-06-09T04:00:00Z,2450,,10 7566,JONES,MANAGER,7839,1981-04-02T05:00:00Z,2975,,20 7788,SCOTT,ANALYST,7566,1982-12-09T05:00:00Z,3000,,20 7902,FORD,ANALYST,7566,1981-12-03T05:00:00Z,3000,,20 7369,SMITH,CLERK,7902,1980-12-17T05:00:00Z,800,,20 7499,ALLEN,SALESMAN,7698,1981-02-20T05:00:00Z,1600,300,30 7521,WARD,SALESMAN,7698,1981-02-22T05:00:00Z,1250,500,30 7654,MARTIN,SALESMAN,7698,1981-09-28T04:00:00Z,1250,1400,30 7844,TURNER,SALESMAN,7698,1981-09-08T04:00:00Z,1500,0,30 7876,ADAMS,CLERK,7788,1983-01-12T05:00:00Z,1100,,20 7900,JAMES,CLERK,7698,1981-12-03T05:00:00Z,950,,30 7934,MILLER,CLERK,7782,1982-01-23T05:00:00Z,1300,,10
Any ideas on what would be causing the Error above in our application?
Thanks,
Pat
Edited by: patfmnd on Mar 11, 2013 3:25 PM
In reviewing the above error, I think we are realizing that we have to have the Weblogic layer SSL cert (actually the CERT from our BigIP load balancer which also does our SSL termination) imported into the Oracle server wallet where Apex is installed. Am I correct?
PM

We resolved our problem. The Apex Administrative Guide made us realize that we had to set up Wallet path in the Instance. This required working with DBAs to follow the Advanced networking guide to get the wallet set up on our server. We then added that path to the Instance configuration. (Manager Instance --> Instance settings). We ran into another other issue related to our implementation of CAS but were able to resolve that, and 'voila' were able to get the sample RESTful service consumed by our application!!
Now to the task of figuring out how to get Basic Auth working between client application and RESTful web service. If anyone has that working, let us know!!
It would be helpful if in the documentation of the Apex 2.x listener or Apex install/configuration there was clear reference to the above steps required for HTTPS access to RESTful web services.
Pat

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Get an error unknown error when trying to access app store

I get an unknown error when trying to access app store on my iphone 4...I have turned it off and on, updated the software, etc. I have never been able to sign in.

You could add your contacts in one by one (or a few at a time) on whatever you are syncing with (Google, MS, etc.) and try and catch which contact is causing problems when you sync.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Error when trying to access to the catalogue

Hello,
When trying to use the ebp catalogue, iu2019m getting the following error when trying to access:
Parameter error when calling up function module BBP_CUF_GET_DATA
Any idea what this means?
Thanks and regards

Hi,
I did some investigation and found that the Company Codes section in the Organisational Structure had been unassigned from the hierarchy for some reason.
I have now restored the organisational structure to its previous state.
issue is resolved

Unrecognized database format error when trying to access addin to Acrobat reader?

I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document? What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
Thanks,
Dan

Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
Add-ins can only use features supported by Reader.
You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

We're using ASP.net with .Net 4, developing with Visual Studio 2012. We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service). The reports are
executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
We only receive this when running a report that uses expressions on a separate thread. I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
This didn't occur with the previous version of our application which used .net 3.5.

As mentioned, we are not using the Reportviewer control, we are rendering locally. Not certain if that would make a difference.
Also, I had tried using all the built-in accounts. Just for kicks I changed it to LocalSystem again, then reset IIS (see image below). I then tried to export the report in a worker thread and received the same error.
Here is the text from the exception:
Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
--- End of inner exception stack trace ---
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

Random users receive an unexpected error when trying to access SharePoint 2010 farm.

Similar Messages

Maybe you are looking for