Randow video dots on display

Having a problem with random video dots that blink on and off on my IMAC27 that is 210 vintage machine. If I shutdown the machine and re-start they disappear for awhile but do come back. I am running the latest version of Maverick. I have read that it maybe a software related problem with one of the applications but really can not determine which one is causing assuming that this is the problem. I would think it probably is a hardware issue.
Has anyone else had this problem and if so, what was done to resolve it.
Thanks in advance for any info
Michael

hi mark, this is another common problem, l had an ibook in for repair once and the screen had like 1,000 fluorescent blue dots. A proper repair would be replacing the screen but a low cost or should l say no cost solution is to move the screen. Does pushing the right bottom side of the screen FORWARD remove the pixels, try flexing the screen gently, the problem is the actual lcd electronics not any cable that can be replaced.
I know the ibook l repaired had the screens bezel coming away at the bottom right and pushing it forward stopped the blue pixels, he replaced the lcd but l salvaged it and glued it to the bezel fixing it

Similar Messages

  • I got bulks of videos in my ipad 2, how can i look at my videos in list display? or make the fonts in my movie gallery smaller?

    I got bulks of videos in my ipad 2, how can i look at my videos in list display? It's hard for me to look through my gallery with grid display..
    any ideas?

    There is no list display option. If there were such an option, it would likely be available within the Videos app.

  • Video does not display when sending from Final Cut Pro to Motion

    Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
    The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
    Additionally, when rendering the Motion file back in FCP, it turns in to black video.
    I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
    Help, please?

    Do you have Motion mistakenly set to render out with an Alpha channel?
    Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

  • "Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

    I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
    Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported".  If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
    Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video.  The current Netflix app update was released yesterday and seems to have taken a step backward.
    When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
    Any ideas?
    Thanks!
    Kiron

    Hello all,
    I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
    So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
    So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
    Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
    Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

  • Video is not displaying in the latest shockwave

    After updating to the latest version of Shockwave, .flv videos are not displaying. The audio is there but no video.
    What is going on Adobe?

    I agree - I am seeing an area where I presume video should be playing but I only hear the sound.
    You won't find an Adobe representative or tech support here, just other users trying to help one another.
    I assume Raymond that you are the content developer? Have you tried isolating the issue into a minimal file that could be submitted to Adobe as a bug report? I would suggest doing so as a start on getting your issue addressed. If you're lucky, doing so will lead you to find a solution, or perhaps a work-around. Create a file that only plays a video. You said earlier:
    I use the Flash asset and call.import which ever video is needed.
    perhaps you could post some code, or a link to a demo file that reproduces your problem

  • Output video to Portrait Display

    We're trying to use an iPad that's mounted in a stand locked in portrait mode in an installation. We're mirroring the video to two displays that we'd like to set up as portrait as well, so that we can take full advantage of the size of the screen instead of having the image only as tall as the height of the display in landscape mode.  We're currently looking for displays with onboard control of the resolution (for rotation purposes) however I'm worried that even if we can rotate the resolution on the display the iPad is still going to only output a small version of the mirrored video, so we'll actually end up with an even smaller mirror.
    Are we pretty much screwed here? Should we just recommend that the displays are hidden behind a faux bezel so that only the center portion where the mirrored video shows up?

    - Via Airplay to an Apple TV.
    or one of these cables.
    - http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a
    - http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a

  • When Importing a Mpeg 4 video, It converts only to a wav file...no video file or display

    I need to add some sound fx, and some voice over to a tv commercial.  I usually do this in protools, but I only have access to adobe audition at the moment.  The file is an MPEG-4 H.264, AAC..  After watching some videos all i thought I had to do was import the file into AA 6, and it would split it into a video track and an audio track..  However, I am only getting the audio track.  I checked my -----Preferences > Media & Disk Cache and "Enable DMLS Format Support" was already clicked.  I have restarted my computer and audition,, but still there is no video display, only the wav file audio from the video...How do I do this properly where I can see the video on a track or display, and then have the audio separate so I can edit it,,add fx, voice over, while the video is being displayed?
    Any help would be much appreciated.
    -thx

    Any chance you can share a screenshot of your Files panel?  Video files, if the codec is supported, should import as the mp4 file (which contains the video stream) and a separate audio file is generated.  Both of which can be dragged into a multitrack session, as you expect.
    Audition CS6 does rely upon "DLMS" (which stands for DynamicLink Media Server) and can take a few additional seconds to launch.  It's possible this isn't launching properly.  Let's find out. 
    Launch Audition, wait 30 seconds or so, then launch Applications > Utilities > Activity Monitor.app   Sort alphabetically and look for a process named "dynamiclinkmediaserver"  Does it exist in the process list?  Does it appear to be failing in some way?  You can also launch Console.app and see if OS X thinks it's failing to launch, and why.
    If that seems okay, try opening the MP4 file again, but try the following method:
    Click File > Open
    In the Enable dropdown at the bottom of the dialog, select MPEG Movie
    Select your video file and click Open.
    Please let us know your results and we can continue to troubleshoot

  • Uploading videos on itune but my mobile videos can't display

    Uploading videos on itune but my mobile videos can't display 

    Hey Sean,
    We have a general iPhone troubleshooting assistant that can help solve many issues, I'd check it out here, go through the steps, and see if that helps:
    iPhone Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/phone/
    Cheers,
    David

  • FireFox no longer displays embedded Youtube videos in WordPress blogs - Even the Youtube videos no longer display on the YouTube website!

    Since yesterday FireFox no longer displays embedded Youtube videos in my WordPress blog - Even the Youtube videos no longer display on the YouTube.com website!

    Go here please, and post your concern. We are trying to show how widespread this issue is:
    Youtube videos not playing on standalone Safari browser iOS 8

  • I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

    I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

    Thanks but I found my problem. It was easy oncew I found out the flask player was also called shockwave. My shockwave add-on was disabled. I'm not certain what caused the condition. I was good one day and not getting the error messages the next day. But, I know what to look for in the future if it reoccurs. Thanks again.

  • Video Ipod Picture Display Issue

    Hey guys,
    I have a 30gig Video Ipod that displays album art when it is downloaded from Itunes -- but when I add the album art myself (say it's a local band, or an import CD) it's very sparatic as to which it will display (you'll always see it in Itunes, but very hit or miss when just listening to the Ipod alone).
    Has anyone had similar issues?

    My ipod will not pick up all the album art that is obviously available on itunes and it will only display it in one corner of the ipod screen. I can't figure out how to fix this either. So I can't watch my movie or tv shows because they're too small.

  • Video app blank display

    I can not get the video app to display anything other than a blank screen.

    Quit the videos app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ....Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or ...  Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and hopefully it will start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

  • Mini-dvi to video adapter changing display on macbook?

    I recently purchased a mini-dvi to video adapter for my macbook to be able to view photos and video on my tv. I'm having trouble with the display on my computer when I use the adapter. As soon as I plug in the mini-dvi video adapter into the computer the display on my computer switches from 1280 X 800 to 640 X 480. Attached to the adapter I have an s-video cable to my tv. The display shows the same on the tv but in black and white.
    Any ideas? Thanks!

    Turn mirroring off. That way the two displays can run independently from one another. The mirroring check box is in Displays Preferences under the Arrangement tab.

  • Yoga 3 pro cant stream video on external display or laptop

    Saw a previous post on this, didnt seem like it was fixed.  Having real issues with hooking up to an external display, when the web browser (chrome) is extended to the external display, my internet lags hard...i cant even stream a vid on youtube.
    I've disabled realtek (fixed cracking speakers) tried a completely new cord set up from micro hdmi to dvi...nothing works.  When i drag the browser window back to the laptop screen, it works fine.
    Ok, 5 min follow up:  it seems im now having the similar issue with streaming video on my laptop screen....sound streams fine, the video seems to shake back and forth very quickly, runs, then shakes again...seems to only happen intermittenltly on the laptop...but display shows real lag and shake.
    Solved!
    Go to Solution.

    Have you tried changing the screen resolution on the Yoga to something lower than what it is set on? A 1080i screen has a resolution of 1,920 × 1,080, my Yoga 3 Pro has a default resolution of 3200 x 1800. I have not tried connecting my Y3P to the TV yet, but the conversion could be causing an issue.
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

  • Is there a way to view video via the display AND TV out at the same time?

    Is there a way to display the video output for supported apps on the display as well as through the TV out at the same time? To explain my setup briefly, I'd like to have the front seat passenger in my vehicle be able to hold the iPad and watch video while the A/V cable runs through the car system and displays on the ceiling mounted TV for the back passengers.
    As of right now, it seems as though it will only allow for one display at a time, and in this case, only showing video through the TV out. I don't know if the iPad has the processing power to mirror outputs to the display and the TV out at the same time, though I imagine that it should.
    So, does anyone have any ideas on how to make this possible, if it's possible at all?
    Thanks in advance.

    If you'd emailed Steve Jobs with this question, here is what his response would have been had he blessed you with a reply:
    No.

Maybe you are looking for