Range Expander Looks Fine - but cant connect to Internet.

I connect to the range extender & things look fine, but I can't get onto the Internet.

What's the model number of the Range Extender as well as the model number of the Router? The Linksys Wireless Range Extender and wireless router or access point’s wireless settings should match in order for them to work properly. You must first identify the following wireless settings of your router:
• Wireless Network Name (SSID)
• Wireless Channel
• Wireless Security Mode (WPA/WPA2 Personal or WEP)
• Network Key or Passphrase
Here is the link for setting up the Range Extender:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=aeb3109289c04de7800546f43771bfe0_3760.xml&pid=80&r...

Similar Messages

Please can someone help me? Have iphone 4 and just returned home from abroad where the phone worked fine. Now it wont receive wifi. It picks up signal and shows on phone but cant connect to internet. Computers and ipod all working ok

Hi, please can someone help me?
Have just returned home from abroad where my iphone 4 worked perfectly.
Now at home it wont receive wifi. It picks up the signal which shows in phones display but cant connect to the internet. Computers and ipod all working fine so I assume it must be a problem with the phone.
Have checked that wifi is turned on and tried resetting phone to no avail

Hello melissa82686,
From your description, it sounds like you may have been using the SMS feature of Continuity in iOS 8. If this is the case and it has somehow become misconfigured after a recent change, you may find the information and steps outlined in the following articles helpful:
SMS
With Continuity, all the SMS and MMS text messages you send and receive on your iPhone also appear on your Mac, iPad, and iPod touch. Even if the person you’re communicating with doesn’t have an iPhone. And regardless of what phone they have, you can reply from whichever device is closest to you, including your iPad or Mac. You can also initiate a conversation by clicking a phone number in Safari, Contacts, or Calendar.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Sincerely,
- Brenden

Everything looks fine, but can't browse internet (BEFW11S4)

My BEFW11S4 v4 won't connect to internet anymore.
Firmware is updated (v4 1.52.03).
Tried to turn off/on both modem and router.
I did a hard reset by pressing the reset button on the back of the router.
The only setting I changed after the reset was Internet Setup. Set connection to PPPOe, entered my username and password, saved.
In Status>Router page, Login status goes 'connected' after a few seconds. Internet IP Address changes from 0.0.0.0 to 200.132.....
In Status>Local Network>DHC Client Table I can see my machine is there. I can connect to the router either by Ethernet or wireless.
But I cannot visit any website. The browser always says 'server not found'.
If I plug may Macbook directly to the modem and configure a PPPOe connection (using same ID/password), then I it works fine.
Any tips would be appreciated. Could this be a hardware problem and I'd better replace my router? It's about 8 years old now...
Solved!
Go to Solution.

Thanks for your reply.
I changed MTU from 'disabled' to 'enabled' then set its size to 1400. Nothing changed.
Then I tried to ping the IP address (I'm on a Mac, the procedure is different but I believe the result is the same) and that was the result (IP address partially replaced by 'XXX' in this message).:
MacBookProi7:~ durval$ ping 200.232.XXX.247
PING 200.232.XXX.247 (200.232.XXX.247): 56 data bytes
64 bytes from 200.232.XXX.247: icmp_seq=0 ttl=150 time=6235.153 ms
64 bytes from 200.232.XXX.247: icmp_seq=1 ttl=150 time=0.944 ms
64 bytes from 200.232.XXX.247: icmp_seq=2 ttl=150 time=0.771 ms
64 bytes from 200.232.XXX.247: icmp_seq=46 ttl=150 time=0.867 ms
^C
--- 200.232.XXX.247 ping statistics ---
47 packets transmitted, 47 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.722/133.468/6235.153/899.644 ms
I understand this is the expected answer: no packet loss.
I did not try disabling Proxy Settings on Internet Explorer, because I do not use IE (all settings were done with Firefox 7 Mac).
Then I borrowed another router from a friend – a Linksys WRT54GS – and it worked fine!
Is there any other settings I should try?

3g Connected but "cant; connect to internet try later often .WHY?

I AM connected to a 3g 2 Gb I compose a mail and when I want to sent it I get a message across the page saying." cannot conect to hotmail please check that you are connected which I did 5 times still Zilch! nut! nine! nothing!

I had a similar incident last fall. For some unknown reason, after having all our systems connect to Airport/Internet perfectly for years, it suddenly stopped connecting, even though I had a strong Airport signal.
After some troubleshooting, I found that if I applied security to my network it refused to connect, and would ONLY connect if the security was left off. We live in a residential area where all our neighbours/friends have wireless, so I had no alternative but to leave the security off, something I have never done. No matter what I tried it would not connect once security was applied, so I left it off. (Interestingly, if security was applied I had those yellow dots in Network Prefs, too.)
Recently, I thought I'd try it again and apply security and it worked first time, and normally, like it always did, so security is back on. I have no idea to this day why for a number of weeks it refused to connect if there was security, but would connect no problem without security. All is back to normal now, thankfully.
I don't know if this will help you at all, but thought I'd mention it so you can try your network without security and then applying it - see if there's any difference.
Rachel.

Brand new macbook pro with osx 10.9.3 software will connect to wifi but cant connect to internet?

my wifi will connect but it says no ip address or
self assigned ip address. help please?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Since I have installed iOS 6.1.3 on my iPhone 5 I have sometimes problems to start a phone call. Everything looks fine, but no ring tone... A workaround is to stop phone app in the multitasking bar. But this is more than inconvenient ;-) Any solution?

In this cases everything looks fine, but no ring tone is there and after sometimes the phone informs me that no connection can be estabilished (its a German phone, therefore I am not sure about the message in English systems). A workaround is to stop the telephone app in the multitasking bar (double click on home button, hold the app symbol pressed for some seconds, close app). Next several call work after this.
I am not sure if an incomming call would work in this mode...
Faces anybody the same problems or has solution for it?

Basic troubleshooting
Restart
Reset
Restore with backup
restore as new if required

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

My wifi bar isnt showing up at the top and i cant connect to internet but its not my router

my wifi bar isnt showing up at the top and i cant connect to internet but its not my router? HELP HOW DO i get wifi back

I recommend that you start with taking a look at the Apple Support article to help you troubleshoot what the issue may be.
If that still doesn't resolve the issue, we will need to get the AirPort icon back on the OS X menu bar to continue. Please try the following:
System Preferences > Network > Wi-Fi > Show Wi-Fi status in menu bar (checked)

My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help

My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help
[email protected]

The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

WRT54G ver 2 - Shows Im connected to wireless but cant get on internet

I just moved into a new apartment and am having trouble getting my wireless router to work. I just got my cable internet set up and can get on with the modem fine but cant get the wireless to work so my roommate can get online. I think i was able to get online when i had the modem connected to the router with a ethernet cord going from router to computer but cant even get that now. I tried some of the FAQ guides like "setting up a router with cable internet' and 'seting up wirless settings on a linksys router" and cloning my MAC and downloading new firmwear for the router but still no luck.
Everything worked fine a couple days ago at my old house. When i search for wirless networks on my mac I see my linksys and it has full connection. When i go to it it shows green lights for ethernet,network settings and ISP but internet and Server are red. I would really like to get wireless internet up so me and my roommate dont have to share the modem tonight so any help would be greatly appreciated.

Bypass the router and connect the computer directly to the modem. Make sure that you can access the Internet through the modem.
Connect the modem to the Internet port and the same computer to Ethernet port 1 on the router.
Check the lights on the router. You will see Power, Port 1, Wireless and Internet lights on the router.
Turn OFF the Airport on your computer.
Press and hold the reset button on your router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and restart your computer.
Open the internet browser and in the address bar type http://192.168.1.1 and log in to the router setup page.
Go to MAC address clone sub tab. Enable the MAC address clone and click on Clone my PC's MAC. Save the settings.
Unplug the power to the router and modem. First plug in the power to the modem. Wait for 1 minute and then plug in the power to the router. Wait for a minute and then try to access the Internet on your computer.
If you are still not able to access the Internet then open the setup page of the router again and check the Internet IP address on the status page.
If you are not getting Internet IP address then router and modem are not communicating with each other.

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

Why is that when i take pictures with my new iphone 4s they look fine but when i download they to my computer or email them they are upside down? how do i fix this

why is that when i take pictures with my new iphone 4s rotationally they look fine but when i try to download them onto my computer or email them to others they come out upside down or sideways. how can i fix it or is it an OS issue?

I have iPad 2 and I am having same problem since I updated to iOS 5. All we can do it is rotate it from computer

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium

Able to join wifi network, but cant connect to web or itunes

Picked up 16 GB iPod Touch today at Best Buy. Able to sync music ok. No problems with sound quality using good earphones.
Touch is good but takes a fair amount of pressure. Guess I will get adapted
Able to join my home wifi network, but cant connect to an website or ITunes wifi- says it can't find the server. I entered my WEP key and pressed join. I have a wifi icon with 3 bars. Did I miss a step?
Am converting a few tv shoes so I can test video

Did you try putting it to sleep/turning it back on. It originally did that for me, I put in my key for my network (which is hard, as its many many digits and letters) and it said it couldn't find the server. I turned it off, and back on, started up the iTunes store, and it connected automatically and worked.

Range Expander Looks Fine - but cant connect to Internet.

Similar Messages

Maybe you are looking for