Range Expander with a WMP54GX4 SRX400 pci card

I am having a great deal of trouble receiving a signal from the various radio signals here. Can I use a range expander with this card or do I have to utilize a router? Is there an expander that will work with my product or is there a product to extend my current antenna wire so that I can move the unit around the room?
Thanks...

I am not using a router...I have a pci card with an antenna. I need to find out if I can use a range expander with this card or do I need to install something else, if there is something else.
I appreciate anything you can recommend.
Thanks.

Similar Messages

Using a lan/hpib gateway (Agilent) with a NI GPIB pci card

Need to be able to use a E2050 lan/hp-ib gateway (Agilent) together with a NI GPIB pci card on the same workstation (windows). I need 2 seperate gpib busses but also need the remote functionality or the lan/hpib box. I would use ni enet but it will not work together with a installed gpib card, only one or the other. Read information on useing an hp card with a ni card in the same system but cannot get it to work with the lan box. I do not have a hp card to install in my computer to see if that works or not. Has anyone attempted a similar task?

Hello-
It is possible to use a PCI and ENET board in Windows 9X/ME. The solution for Windows NT/2000 is to use the new VISA server technology using two computers.
Computer A:
This is a computer that will not use a GPIB plug-in board, but is on the network. Install the GPIB-ENET/100 driver and VISA 2.6. Then, set the appropriate VISA server permissions and run VISAServer.exe (see the VISA Programmer's Reference for more details ni.com/manuals).
Computer B:
Install the PCI-GPIB driver and VISA 2.6. Use Remote VISA to access the ENET/100 through the other computer's driver.
This is also a very useful technology for remotely controlling numerous instruments throughout a distributed laboratory.
Randy Solomonson
Application Engineer
Natio
nal Instruments

JNI to access functions of a dll to deal with a data aquision pci card

i am trying to do an applicattion to access the functions of a dll
to deal with a data aquision pci card (Analogig/Digital pci card).
i�m using jni of course, but i have some problems.
first i did a class called "TesteDll" witch contains all the native methods to access the functions of the pci card.
after, i did a "TesteDll.jar" to use these methods in another applicattions.
everything was fine until there. so created a single program like this:
TesteDll td = new TesteDll();
short res1 = td.P1602_DriverInit(wTotalBoards);
short r = td.P1602_ActiveBoard((short)0); // ativa a placa
short res2 = td.P1602_GetConfigAddressSpace((short)0,wAddrTimer,wAddrCtrl,wAddrDio,wAddrAdda);
int dwRepeat;
for(dwRepeat=0 ; dwRepeat<100 ; dwRepeat++)
short wRetVal;
wRetVal = td.P1602_ClearScan();
wRetVal += td.P1602_AddToScan((short)0,(short)0,(short)1,(short)0,(short)0,(short)0);     // CH:0 to scan
wRetVal += td.P1602_SaveScan((short)0,wV0);
wRetVal += td.P1602_AddToScan((short)2,(short)0,(short)1,(short)0,(short)0,(short)0);     // CH:2 to scan
/* ->error here!*/ wRetVal += td.P1602_SaveScan((short)1,wV2);
the programs compile correctly, but in the execution the folowing error was descripted:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8079A50
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at TesteDll.P1602_SaveScan(Native Method)
at Teste2.main(Teste2.java:119)
Dynamic libraries:
0x7CD80000 - 0x7CD9D000      C:\WINDOWS\SYSTEM\IMAGEHLP.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 161K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 31% used [0x10010000, 0x100385c0, 0x10090000)
from space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 0K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 0% used [0x104f0000, 0x104f0000, 0x104f0200, 0x10650000)
compacting perm gen total 4096K, used 1044K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 25% used [0x14010000, 0x141152e8, 0x14115400, 0x14410000)
Local Time = Wed Jun 01 10:21:14 2005
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_06-b03 mixed mode)
functions like "P1602_DriverInit(wTotalBoards)","P1602_ActiveBoard((short)0)" functions correctly.
i run the same program in c++ builder and everythings goes fine, but i need to do it in java. i don�t know what to do,can you help me?
thanks

i almost forgot, i�m using win 98.
First i used Dev C++ to make the JNI dll and the error ocurred at the first call of "P1602_AddToScan()" function. after i made the jni dll using C++ Builder, and the error ocurred at the second call of "P1602_SaveScan()" function. but the error message in both cases was the same.
for(dwRepeat=0 ; dwRepeat<100 ; dwRepeat++)
short wRetVal;
wRetVal = td.P1602_ClearScan();
/*First Error - Dev C++*/ wRetVal += td.P1602_AddToScan((short)0,(short)0,(short)1,(short)0,(short)0,(short)0); // CH:0 to scan
wRetVal += td.P1602_SaveScan((short)0,wV0);
wRetVal += td.P1602_AddToScan((short)2,(short)0,(short)1,(short)0,(short)0,(short)0); // CH:2 to scan
/* Second error C++ Builder */ wRetVal += td.P1602_SaveScan((short)1,wV2);
...

IPod touch will not work with USB 2.0 PCI Card?

I have a dual processor PowerMac G4 that has USB 2.0 via a PCI card. When I plug in the iPod nothing at all happens. I haven't read anything about PCI cards not being compatible with the touch. Is anyone else having this problem?

Just thought I'd add my 2 cents...I've got the same problem...I've had a Keyspan USB 2.0 5 port card in my Dual MDD G4 for years and it's worked fine. Well, until a few days ago when I tried updating some stuff on our iPods. It would initially start working then lose connection. Now nothing at all with 5 iPods. It won't even show up on the desktop under Disk Mode. I did the same and it works fine under the old stock USB 1.0 but slooooooowwww. Is this yet another problem with Leopard? I've searched the Keyspan site and they don't have any updated drivers. Guess I'll look for a Belkin as well...ugh!!! Leopard is horrible! First no printer drivers, then no iSub support, now this!

New classic with third part USB pci card

Hi,
Just got a new 120gb classic for my son. But it does not
seem to work with his computer. He has an old g4 tower, with
third part usb 2 card. That worked fine with his 30gb video,
but the new 120gb classic is not even recognised by the system.
It is recognised by my g5, and my older 160gb classic is recognised
by his g4.
My guess is that the current generation of ipod classics
is not compatible with the third party pci usb card. Aarg.
Does anybody know of a cheap usb 2 pci card that will work
with both a g4 and a new "classic" ipod?
Any other thoughts?
Thanks
David

I reset parameter ram, updated all the software, and it seems to work fine now.

Linksys Range Expander With Time Capsule

I have a time capsule that I use to wirelessly connect to my Mac.
My wife has a PC some distance away.
I have a Linksys Wireless-G Range Expander Model No. WRE54G V3
Is there any problem in using it with the time capsule to connect to my
wife's PC?
The AirPort Utility says that the time capsule IP address is 10.0.1.1
Is this all I need to know?
Thanks.

Hi… If you get limited or no connectivity, it can be the issue with Wireless Security. Make sure that you router and Range Expander are on same SSID and wireless channel and wireless security settings are same.

Rev. A Beige G3 DT compatible with USB 2.0 PCI cards?

Having had a lot of luck upgrading and updating some old Sawtooth G4s I decided to try my hand at something more interesting - an old Rev. A Beige G3 that fortuitously dropped into my lap.
I tried installing a 5-port USB 2.0 card with an NEC chipset, since apparently NEC's chipsets are the most compatible chipsets with the Mac. However, I've been getting Type 11 errors on startup everytime. Curiously, an older 2-port USB card works fine.
So my main question is: has anyone else seen this occurring? Have other successfully used NEC-based USB 2.0 PCI cards on their Rev. A Beige G3s?

Sorry for the inordinately long time it took me to reply. The OS running on the G3 is 9.2.2.
After doing some digging around I discovered a trick with replacing the OS 9 USB adapter card extensions with those from the installer for USB Adapter Card 1.4.1 updater. What I did was that I took out of my extensions folder the following files: USB Authoring Support, USB Device Extension, USB Software Locator, and USBAppleMonitor. I then ran the 1.4.1 update, and everything seems to work - the computer recognized the card and USB mice and hard drives were detected by the system.
I'm normally not one for mixing and matching extensions, but I'm glad the card now works.

LG GGC-H20L with Sonnet Tempo Sata Pci Card into Powermac G5

Hello dear Community.
I have a LG GGC-H20L HD-DVD/Blu Ray Drive. And a Sonnet Tempo SATA PCI Card.
The Problem is, that the Computer cant find the LG GGC-H20L Drive. The Sonnet Tempo Card it find. Broke i drivers? And where i can get it?
Can one of you Help me?

Nokiman
I made sure there was a good 'thunk' as it slotted in to the PCI slot everytime I installed it, I wiggled it to make sure, I applied reasonable pressure to make sure it was seated correctly, etc. I tried everything, short of using a hammer! Still no joy. I have a PCI firewire card which works perfectly in all slots.
I've sent it back to the supplier for a replacement/upgrade to the Tempo-X 4+4.
Thanks for the tips.
Andrew

P4M Freezes with WiFI PCI Card

My PC freezes requiring a reboot.
This has occured since I recently replaced an IDE HDD with a SATA HDD. The PC freezes pretty quicky; sometimes when everything is up and running for a few minutes, othertimes at the XP logon screen
This is associated with my WiFi network PCI card (D-Link DWL-G520). Using an ethernet cable to my router everything works absolutely fine.
Things I have tried:
MOBO BIOS is the latest version
WiFi card drivers are the latest
Used both PCI slots
Used both SATA sockets.
All suggestions gratefully received!!
JMH

Hello,
look for a PCI Latency Timer option in BIOS and increase the value. Try different settings and test again each time.

Pcie card compatability with mac pro

I started getting regular Kernel Panics after installing a PCIe card (in slot 3) to connect my 750gb seagate pro drive to my mac pro via eSATA (the specs for the PCIe card are below).
http://www.avlab.com.tw/sata/10060109000bx.htm
I have uninstalled the drivers and my mac has stopped crashing. My problem is that since the silgate 3132 driver is (im told) pretty much universal for running this kind of pcie card, how can I be sure that if I purchase another card it won't start causing kernel panics again?
Any help much appreciated,
Henry

I know im being stupid (sorry) but what do you mean by using up all four of the drive slots in the mp?
I inserted a pcie card in pcie slot 3 because there are no external esata ports on my macpro and i needed one to connect an esata drive.
with regards to the pcie card itself i've pretty much given up on making it work as from looking at their site whilst they claim mac compatability it seems to have been something of an afterthought.
my problem is that im worried any pcie esata card i buy will conflict with my mac because i've been told that they mostly use the same generic si3132 drivers which caused the kernel panic.
Message was edited by: Henners2000

Question about dual-monitor setup - advanced dock + PCIe card

I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got:
Primary monitor: Acer AL2416W (1920x1200 DVI)
Secondary monitor: Dell 1901FP (1280x1024 VGA)
I've read that the advanced dock might be able to let me use this setup with the Z60t if i put a PCIe video card in it. So here are my questions:
1. Will the advanced dock + PCIe video card allow me to run the two monitors listed above (I don't use the laptop screen at all)?
2. Which PCIe cards are compatible with the advanced dock?
3. Can I achieve the same resolutions with the advanced dock + PCIe card?
4. Will I need to split the VGA output, or can i use VGA + DVI like I do now (since the Z60t has no native DVI support)?
thanks!

Gary -- don't turn on the OS Display Mirroring. Turn it off.
You want Aperture to control how it uses your dual monitors. (You do not want the OS to determine it.)
Once you've turned off the OS "Display Mirroring", the set-up I specified above should give you what you want.
That set-up is:
"View → Main Viewer → {anything}", and
"View → Secondary Viewer → Alternate"
You must have the Viewer active (not the Browser) in order to change the "Secondary Viewer" setting. If you are in the Browser, activate the Viewer by double-clicking an Image.
Let me know if that doesn't work.

Linksys Wre54G range expander

Can I use a Linksys WRE54G range expander with a Linksys E 3000 router using WPA2/WPA shared ?

Linksys only Has Wre54g Range expander only compatible with G&B Standard Devices(B Standard -Selected Devices) E3000 is a N Standard Device and can broadcast up to a good Range.No Compatible Linksys Range expanders yet for N standard Devices

Seeking advice for backing up Xserve G5 w/ RAID PCI card

Hello all!
I'm a newbie to Macs and server admin, and I have inherited the job of setting up a server at work for file storage. I'll do my best to give a concise description of our set-up - I'm looking for some advice on the last few odds and ends... mainly how we can backup the system.
We bought an Xserve G5 with an option RAID PCI card. We have 3 500GB drives in the Xserve, configured to RAID 5 (giving us effectively 1TB of storage space). We will be using the server for data storage. About 20 computers will access the server over a network; we are using an assortment of Macs and PCS.
I am seeking advice on backup systems for the server. In the event that the RAID5 fails, we don't want to lose our data. We just need a snapshot of the server; we don't need to archive data or to take the HD offsite. Our old server just used Retrospect to run incremental backups every night (with a complete clean backup once a month). Our current thought is to attach large external hard drive to our admin computer (not the server directly) and run nightly backups as before.
The major points I have are:
-Any thoughts on reliable 1 TB external drives?
-Any recommendations on software that can backup from a RAID over a network? I found info for Retrospect Server 6.0 - it seems to do what we want, but is rather pricey.
Thanks in advance for any advice! I really appreciate it!
Xserve G5 Mac OS X (10.4.2)

Greetings-
We all started out as newbies at one time or another-no worries. That is why we are here.
I personally use the Lacie branded drives. They are sturdy and reliable. My only thoughts here are to have at least three external drives-one for today's backup, one for a backup stored securely nearby, and one to be securely stored off-site. Rotate the drives daily so that your worst-case scenario will be a catastrophe that requires you to use a three-day old backup, depending upon how old your off-site backup is. Not ideal but better than the alternative. External drives are cheap enough these days to allow you to do this at a reasonable cost. Plus it is easy enough to throw one in a briefcase and tote it home for safety (just don't lose it!)
I would stay away from Retrospect. If you search these forums you will find several instances of folks having some serious issues with the program. I use a program called Carbon Copy Cloner that does the job nicely for my basement server. There are ways to do the backups via the command line interface as well but I am not so familiar with those commands. You may have to dig a little deeper to find something that works for you.
One of the other advantages of the FW external drive is that you can share it with other users, so perhaps you can set things up to have your network backups to go to that drive. Tis a thought.
Luck-
-DaddyPaycheck

Lenovo pci card help please

hello all
please can someone help me i have a lenovo H330 decktop pc 2/3 years old
it has 2 x 2.0 usb ports in front i want to replace with usb 3.0 pci card is it possable
or will i have to replace ports at rear instead
also were would be the cheapest place to buy amerzon or maplins ?
also what one do i need to buy ?
thank you paul

hi Paul,
Welcome to the Lenovo Forums.
Looking at the IdeaCentre H330 specs, the machine natively supports USB 2.0 only so you cannot replace the front USB ports with USB 3.0. However, you're still be able to add a USB 3.0 port by getting a PCIe x1 USB 3.0 card.
- Link to picture
If you're planning to use more than 3 USB 3.0 devices at the same time, you will need:
1. A USB 3.0 PCIe x1 card (like this item).
Note:
The card requires a 5V external power. If there's no available molex connector on the machine, you will need to use the 5V 4 Pin Male Power Connector and set it up as shown in this picture. After setting it up, load up the cd and install the driver.
2. (Optional) For convenience, you can add a USB 3.0 Extension Cable.
I'm not familiar with amerzon or maplins but you can try getting these on amazon or a local retailer.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Apple 2Gbit PCIe card - compatilibty

Hello Ya'all:
I was wondering if there were any issues with the Apple 2Gbit PCIe card in the Mac Pro -- i.e. drivers?

If you are asking about the 2Gb Fibre-channel card, then the answer is that it is supported.
JH

Range Expander with a WMP54GX4 SRX400 pci card

Similar Messages

Maybe you are looking for