Range is the problem with my wirless network?

I am wondering if I should take this Belkin Wireless g plus mimo roter back to the store and get to apple airport express modules to link them together for more range. The only reason I went with Belkin is that I had a gift certificate to Best Buy.

In short, it is the fact that you are using mini DV - it is limited in resolution. You should use a different output connector if possible.
The following are the specs for the two types of DV output:
50Hz "PAL" 720x576, 25fps
60Hz "NTSC" 720x480, 29.97fps

Similar Messages

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.

The problem with the network card.

The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.

Pawełek wrote:
The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.
This confusing which one are you asking about?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

Hey Apple when are you going to fix the problems with IOS 8.3??

Hey Apple when are you going to fix the problems with IOS 8.3??
Message is working weird.
I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
If there's a fix coming when will we see it?
(I'm using iPhone6 plus)
I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!

I have a Verizon iPhone 6 and am having none of those problems.
SueMac wrote:
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-…

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Has Apple fixed the problem with 4G cellular connection?

Has Apple fixed the problem with 4G cellular connection on the iPad 3?

Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question.

I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

What brand/model USB drive? Is it bus or AC powered?
On Mail...
First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist

I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?

I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank u

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

HT1338 what about the problems with the trojan virus is that a problem for my mac as well?

What about the problems with the Trojan virus will this be a problem also for me using Mac

What Trojan?
If you're referring to the DNS Changer Trojan, it's highly unlikely you're affected. The actual distribution of the trojan was stopped several years ago and the perpertrators jailed.
The FBI has been maintaining the servers used by the trojan for the last 5 years in order to give affected systems time to be purged. They will finally shut them down on Monday.
Ensure that your router and the Mac's network settings are set for the DNS addresses of your ISP, or if you're not sure what they should be, change them to Open DNS using the IP addresses;
208.67.222.222
208.67.220.220

Emails are "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server.

Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.

No that is not it:
Open Mail>Preferences>Accounts, the first page has this on it
If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
If you select Edit SMTP Server list you get this:
Post it here and, select the Advanced Tab (which looks like this)
Post this page as well.

What's the problem with T-Mobile nokia phones?

I recently bought a nokia 5300 T-Mobile here in Kenya but then am experiencing problems accessing local networks that is SAFARICOM and CELTEL.I tried consulting and everyone seems to believe that the T-Mobile phones are just like that...have network problems. I understand T-mobile is south African (though not sure. Could somebody out there help me? what do I need to do to help solve the problem?

In addition to the previous answers, the problem with the Seagate HD's involved in the recall is that they have a very high failure rate, to the extent that Apple expanded the recall to cover more computers than it initially did. For example, a user on Macintouch (another online Mac support community that is well worth checking out) reported that his company bought 40 iMacs and 25 of them needed their 1TB Seagate drives replaced.
So if you can, get somebody with access to your computer to backup its HD as soon as possible if you don't already have a full backup.

Window 8 WiFi problem with Cisco wireless network

Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad App

This problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts.

Any news on the problem with iTunes Store?

I'm still unable to download anything from the store. The US site claims everything is fixed...

The problems with the store from yesterday were fixed judging by posts on here saying that it was working for them. If you are still having problems, and you can get online in other apps (e.g. Safari), then have you tried :
- disconnecting and reconnecting to your network
- doing a soft-reset of your phone (pressing and holding both the sleep and home buttons for about 10 to 15 seconds, ignoring the red slider, after which the Apple logo should appear, which is the equivalent of a reboot
- logging out and back into your account on your phone via Settings > iTunes & App Stores

The Problems With Logic (as I see them) - PART TWO!

Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com

11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work.

Range is the problem with my wirless network?

Similar Messages

Maybe you are looking for