Range of Airport Extreme is poor

Perhapss you can advise me about your setup. I have an Airport Expresds and recently obtained an Airprt Extreme. My Express does not have a range greater than 20 feet from the base station. I tried to connect the New device to it but was not able to do so. I tried to use only the Exteme and installed that but find that the range of coverage is only perhaps 10 feet greater and it is dead in the kitchen of my frame constructed ranch house.
I also note that the Extreme is very warm to the touch. Is this common?
What items present in my home might interfere with the functionality of Airport devices?
Howard Goldstein
Pomona, NY

What items present in my home might interfere with the functionality of Airport devices?
Checkout KB 58543, AirPort: Potential sources of interference.

Similar Messages

Extending the range of Airport Extreme in house with walls

Any sugggestions on the best way to extend the range of Airport Extreme? The base unit is located in an office at one end of a house. I would like to be able to connect from rooms at the other end of the house, some 70' away. There are three walls betgween the base and the far room.

I have essentially the same problem, except that our router is a Netgear product (NOT my choice, my husband is a PC guy). I get a great connection when my G5 is on the desk, but if I put it under the desk (which is where I really, really want it) I get nothing.
Will an Airport Express do anything for me? Or do I need to get an AirPort Extreme router? If I get an Airport Extreme router and locate it closer to my computer can I set it up to work with the same cable internet service we have the Netgear connected to? Or do I have to have a totally separate service? My computer is downstairs, the Netgear is up. Moving it is not an option. Our house is wired for cat 5 throughout. (No idea if this matters, I'm clueless on this stuff). Thanks in advance for any suggestions.

How to fix poor wireless range using Airport Extreme?

I've just bought and setup an Airport Extreme router and have connected this using a DSL modem.
Everything works great from the room that I have set this up from, connection is good and wireless speed is fast. However, as soon as I leave the room - even if just outside of this - the internet speed either slows right down (to a very slow, unusable speed) or the connection to the network is lost completely.
Are there any settings that I may have got wrong? As I would expect the connectivity to be much better for this.
Thanks in advance,
Kevin

Do you have a Mac or Windows computer? If so, there are ways to get them to show you information about the strength of the WiFi signal as the computer moves around. If you don't, there may be a utility you can run on your iOS device that can show you that information.
Other than "iOS 5.0.1", you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post. Those can help people give you correct advice. To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile". Scroll down to "My Products" and either edit an existing one or add a new one.

How to set-up new Airport Express to extend range of Airport Extreme

Purchased a new Airport Express to use it as a range extender on existing home network with an operating Airport Extreme base station. While I've read instructions, I'm unclear whether the Express needs to be connected by ethernet cable for its initial setup, or can I simply plug it and initialize it wirelessly onto the same household network? (I've tried the latter but without success).

to edex67 and Bob Timmons:
My objective is to extend the wireless range of the Airport Extreme base station wirelessly - so I do appreciate that the Airport Express would needsto be located haflway between the base station and the "dead zone" area.
The suggestion of using a Powerline ethernet connection to the Airport Express has merit (especially as I have one available).
I continue to use OSX 10.6.8 - does this affect my set-up in any way?
My problem had been - and remains - how to configure the Airport Express in range extend mode - I did click these boxes on both the Extreme base station and the Express, however the Express still has flashing amber lights and error codes - one indicating no internet availability on the Airport Express.

HT4260 what is the actual range of airport extreme in meters ? can it cover my whole home if it is in the range of 50 meters of radius ?

What is the actual range of the Airport Extreme in Metres? Can it Cover up to 50m in Radius?

What is the actual range of the Airport Extreme in Metres? Can it Cover up to 50m in Radius?
50m would be approximately the range.....if there were no walls or obstructions in the path the wireless signal must travel.
Since we know nothing about how many walls, ceilings or other obstructions there might be the path that the wireless signal would take in your home, or the construction type of those obstructions, we cannot even make a guess about whether the AirPort Extreme might provide a signal to cover your home.

What's the range of airport extreme can the signal reach my basement my house is about 2500 sq ft

Whats the range on the airport extreme is the signal strong enough to reach the basement of a 2500 sq ft home. Thx

The maximum free-space range is 150 feet; slightly more in the 5 GHz band. However, walls, floors, other electronic devices, microwave ovens, etc. will attenuate the signal reducing the range for actual use.
I live in a 2300 SF townhome and wireless works fine from an AEBS on the second floor. I use an Airport Express on the first floor in Extend mode that is configured for my Slingplayer. Apple TV2 does not seem to have any problems. It's also on the bottom floor.
This is a six year old home so the walls are not made of plaster. Plaster on metal lath can prevent AEBS signals from being detected outside of the room where it's located.

How to extend wifi range using Airport Extreme and Airport Express connected via ethernet cable

Hello,
I'm having an Airport Extreme fifth generation in my living room. I bought yesterday an Airport Express to extend the range of my WIFI in the house and I put in in my bed room. The two devices are connected together via an ethernet cable, from airport extreme (lan 1 port) to airport express to (wan port). Now from the airport utility what configuration I have to set to the airport express in order to extend my wifi range? Inside the wireless tab what i have to select in the network mode?
1. Create a wireless network (use same same wireless network name and pass work as the airport extreme)
2. Join a wireless network
3 Extend a wireless network ?
Thank you

You are way overthinking this. The utility will literally configure everything for you automatically. All that you need to do is name the device and click Next during the setup.
You can use your Mac using Mountain Lion or an iPhone or iPad.
Post back if you need the steps.

Help: Using Airport Express to extend the range of Airport Extreme

I am trying to use the Airport Express to extend the range of the network created by my Airport Extreme. The Express works in terms of streaming music from iTunes on the PC connected to th Extreme.
However, I am trying to run a short Cat-5 cable out of the Express to a nearby PC in order to have access to the internet. If the Express is recognized by the Extreme and can play music through connected stereo cables, why can I get an internet connection through the LAN port..??
Here's a real basic representation of my connections...
Cable Modem >>-- Cat5 -->> Airport Extreme >>-- Wireless -->> Airport Express >>-- Cat5 -->>PC#2

To wirelessly extend the range between two AirPorts, you need to configure them in a Wireless Distribution System (WDS).
To facilitate the WDS set up, try the following:
o Perform a "hard" reset on the AirPort Extreme Base Stations & a "factory default" reset on the AirPort Express Base Stations (AX) before setting up the WDS.
o Place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete.
o To avoid having to "switch" wireless networks during the WDS setup, attach each of the remote/relay base station, via an Ethernet cable, to the main base station. Of course, this would be dependent on the AirPort types used for the main/relays/remotes.
o Be sure to jot down the MAC addresses for each of the base stations to be used in the WDS as these will be required during the setup.
o When enabling wireless encryption, configure the relay/remote base stations first and the main base station last.

Airport Express to Extend Range of Airport Extreme 802.11 ac???

Hi:
We just installed a new Airport Extreme 802.11 ac. I would like to extend range within the house with our older Airport Express. I plug in the Airport Express (model A1264) 1 m away from the Extreme, but the light just blinks yellow on the Express. When one turns to Airport Utility, the box in the top left (Other Wi-Fi Devices) shows no other discovered options. Is this 802.11 n Express not compatible with my new 802.11 ac extreme, or am I doing something stupid/wrong?
Thanks!

Tried soft and hard reboots on the Express. I now have a slowly flashing yellow light.
But, Airport Utility under the tab "Other Wi-Fi Devices" still lists nothing.
Airport Utility in the main window has a globe with a green dot next to the word "Internet" under it.
There is a vertical line under the globe going to an icon of my brand new Airport Extreme that has a green dot under it and the name of the Airport Extreme.
My iMac is connected to the internet via an ethernet cable (Wi-Fi is off).
This is the same configuration I had with my old Base Station, but for some reason the Airport Express doesn't show up in Airport Utility with my new Airport Extreme as the base station and I have no idea how to use Airport Express as a range extender.
Again, thank you for your advice and help.

Extending Range of Airport Extreme via LAN connection to Airport Express

I am an expat living overseas. I live in a 100 concrete walled house and thus when trying to set up a wireless network I have very limited range. Using Airport Extreme is not a problem downstairs...but to extend the wireless connection upstairs had been a challenge. What I've attempted to do is use the LAN connection on the back of the Airport Express Base Station and run the line upstairs along the side of the house into a room upstairs. I then have connected the ethernet line to an airport express in this room. My computers upstairs recognize the Airport Express and are connected to it...but I can't get an internet connection to those computers. Additionally, the Airport Extreme Base Station does not recognize the Airport Express as part of the network (wireless or LAN). Any suggestions?

I would bring the Expresses to the room where you have your Extreme and factory reset the Expresses so that they are in the original condition when they came out of the box - they will reflect their Apple IDs.
I would then open the Airport Utility (I am assuming you have the new Extreme, not the old one). Scan for the Expresses and then join them to the network.
If they work in the room where your Extreme is located then they are configured appropriately. They I would try moving them back to the room where you want to extend your network. If they then do not work you will know it is not the Express but the amount of concrete and metal in your building.

Extend range with Airport Extreme and D-Link DI-614?

Can I use an Airport Extreme and a D-Link DI-614 wireless router to extend the range of my network? If so, which router should be the main base station, and which should be the relay station?

...does anyone know the cheapest way to extend a wireless network?
Ethernet cable. Run an Ethernet cable between the 2 devices.

Extending the range of Airport Extreme 802.11n

I have 2 Airport Extremes 802.11n. One of the is connected to a DSL modem and it works fine. I have been trying to use the other one to extend the network, but have not been successful.
I used the exact steps in the manual (Designing Airport Network) published by Apple. The steps I used (several times) were under "Extending the Range of an 802.11n Network".
Whenever I compete the steps and update the base station, the one that I want to use as the extension (not connected to the internet) disappears from the Airport Utility Application and the base station blinks the orange light. I did reset the base station and tried the guide several times but no success.
I am doing something wrong or this manual is not complete. Any help from you guys will be most appreciated.
Thanks!

I have the same problem. I didn't have this issue with the 802.11g version. Are you using the base station in "bridge" mode? Because when I used the "n" basestation in DHCP/NAT mode, it worked fine. Unfortunately, I needed to change to bridge mode for reliability issues with my service provider.
Now I have the same issue as you.

Short short range with airport extreme card

Hello,
my neighbour bought an Airport Extreme Card for his iBook, in order to connect (wireless) to my airport express base station. (our flats are adjacent). His mac is an iBook G4 with OS X 10.3.4
We installed the card, the airport software, but no network appeared in the network menu...
We had to move to my flat and take his iBook very close from the Airport Express Base Station... and then, we were able to connect. But the quality of connection was very poor.
The network works fine, my computer and the one of my Wife (a Mac and a PC) connect perfectly.
Do you have an idea of what could be wrong ?
Compatibility between the iBook and the card ?
Card with a defect ?
Software problems ?
Thank you a lot for helping.

Charles, Welcome to the discussion area!
Did you properly connect the antenna wire to the AirPort Extreme card? Look at the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card. It can take more force than most people think to get the antenna wire properly connected.

Extending range on AirPort Extreme

The range of my AirPort Extreme is very short, seems a lot shorter than when I first set the network up.

Cordless phones, BlueTooth devices, and other WiFi networks around you can all interfere with the wireless signal, which can slow things down and limit the range of the wireless signal significantly.
Chances are, there are three or four times as many wireless networks around you than there were just a couple of years ago. That can make a big difference.
Unfortunately, the number of available wireless channels has not changed in many years, so there is severe overcrowding in many apartment areas, condos, etc where folks live in close quarters.
The AirPort Extreme will try to find the best channel to use when it starts up. So, if you have not powered off the AirPort Extreme recently and then powered it back up, now would be a very good time to do this.

Expanding range of airport extreme

how can I expand the range of an airport extreme. I am in a condo and only get about 30 ft range. is this unusual? are there any settings that I am missing? would another router about 20 ft pick up the signal and boost it?
thx

30' is extremely under spec. Have you tried using a different wireless channel? Are you using wireless G or do you have N enabled? Are your walls made of lead? Are there wireless phones or microwave ovens nearby, or other electronic devices that use the 2.5Gh spectrum, that might be interfering with the signal and destroying your range? Is your router tucked away behind furniture or electronic devices that might block its signal? Can you mount it higher up than it is currently (i.e., on top of a bookshelf vs. just on a desk)?
To answer your original question, yes, you can extend your range, either with an Airport Express or another Airport Extreme (or even a time capsule). But I believe you can only extend Apple routers with other Apple routers. I have never done this myself, so I cannot give advice on the configuration particulars. But first, look into the things in the first paragraph above - like I say, 30', even if you just have an older wireless G router, is an extremely short range.

Range of Airport Extreme is poor

Similar Messages

Maybe you are looking for